Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Crystal chemistry peculiarities of Cs{sub 2}Te{sub 4}O{sub 12}

The Raman and IR-absorption spectra of the Cs{sub 2}Te{sub 4}O{sub 12} lattice are first recorded and interpreted. Extraordinary features observed in the structure and Raman spectra of Cs{sub 2}Te{sub 4}O{sub 12} are analyzed by using ab initio and lattice-dynamical model calculations. This compound is specified as a caesium-tellurium tellurate Cs{sub 2}Te{sup IV}(Te{sup VI}O{sub 4}){sub 3} in which Te{sup IV} atoms transfer their 5p electrons to [Te{sup VI}O{sub 4}]{sub 3}{sup 6-} tellurate anions, thus fulfilling (jointly with Cs atoms) the role of cations. The Te{sup VI}-O-Te{sup VI} bridge vibration Raman intensity is found abnormally weak, which is reproduced by model treatment including the Cs{sup +} ion polarizability properties in consideration. -- Graphical abstract: Two versions of the BPM estimations of the Raman intensity for the Cs{sub 2}Te{sub 4}O{sub 12} lattice vibrations: (a) without including effects of the Cs-O bonds and (b) including the above mentioned effects. Experimentally observed peaks are characterized by their frequency positions. Display Omitted Research highlights: > Extraordinary features observed in the structure and Raman spectra of Cs{sub 2}Te{sub 4}O{sub 12}. > Ab initio and lattice-dynamical model calculations. > Abnormally weak Raman intensities of the symmetric Te{sup VI}-O-Te{sup VI} bridge. > The monovalent Cs{sup +} cations profoundly influence the polarizability properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extraordinary suppression of carrier scattering in large area graphene oxide films

In this study, we find that thermal treatment in ethanol vapor has a remarkable suppression effect of carrier scattering occurring between reduced graphene oxide (rGO) flakes in large area films. We observe excellent electrical properties such as high carrier mobility (∼5 cm{sup 2}/Vs) and low sheet resistance (∼40 KΩ/□) for the rGO films. From the electrical conductivity analysis of large area rGO films using two-dimensional variable range hopping model and structural analysis using Raman spectra measured from the rGO films, we reveal that the significant effect is caused by the expansion of conjugated π-electron system in rGO flake due to the efficient restoration of graphitic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Importance of multimodal characterization and influence of residual Li 2 S impurity in amorphous Li 3 PS 4 inorganic electrolytes

Amorphous Li 3 PS 4 (LPS) solid-state electrolytes are promising for energy-dense lithium metal batteries. LPS glass, synthesized from a 3:1 mol ratio of Li 2 S and P 2 S 5 , has high ionic conductivity and can be synthesized by ball milling or solution processing. Ball milling has been attractive because it provides the easiest route to access amorphous LPS with a conductivity of 3.5 × 10 –4 S cm –1 (20 °C). However, achieving the complete reaction of precursors via ball milling can be difficult, and most literature reports use X-ray diffraction (XRD) or Raman spectroscopy to confirm sample purity, both of which have limitations. Furthermore, the effect of residual precursors on ionic conductivity and lithium metal cycling is unknown. In this work, we illustrate the importance of multimodal characterization to determine LPS phase and chemical purity. To determine the residual Li 2 S content in LPS, we show that (1) XRD and 31 P solid state nuclear magnetic resonance (ssNMR) are insufficient and (2) Raman loses sensitivity at concentrations below 12 mol% Li 2 S. Most importantly, we show that 7 Li ssNMR is highly sensitive. Using 7 Li ssNMR, we investigate the effect of ball milling parameters and develop a robust and highly reproducible procedure for pure LPS synthesis. We find that as the residual Li 2 S precursor content increases, LPS conductivity decreases and lithium metal batteries exhibit higher overpotentials and poor cycle life. Furthermore, our work reveals the importance of multimodal characterization techniques for amorphous solid-state electrolyte characterization and will enable better synthetic strategies for highly conductive electrolytes for efficient energy-dense solid-state lithium metal batteries.

25 ENERGY STORAGE↗

Impact of dynamic Jahn-Teller effect on magnetic excitations, lattice vibration, and thermal conductivity in U 𝑥 ⁢T⁢h 1−𝑥 ⁡O 2 system

Vibrational and magnetic properties of single-crystal uranium-thorium dioxide (U 𝑥 ⁢T⁢h 1−𝑥⁡ O 2 ) with a full range of 0 < 𝑥 < 1 are investigated. Thorium dioxide is a diamagnet whose thermal properties are governed by lattice vibration. The addition of paramagnetic uranium ions leads to the emergence of magnetic effects that alter the thermophysical properties noticeably even at room temperature. The interaction of phonons with magnetic moments of uranium 5⁢𝑓 electrons mediated by magnetoelastic coupling results in an anomalous low-temperature thermal conductivity profile. Analysis of the magnetic susceptibility measurements indicates a departure from the Curie-Weiss relationship characteristic of noninteracting paramagnetic ions, previously associated with the dynamic Jahn-Teller (DJT) effect characterized by coupling between spin and the oxygen sublattice. The T 2⁢g Raman peak position follows a nonlinear trend as a function of uranium concentration and hints that these Raman active optical modes play a role in either DJT or in mediating quadrupole-quadrupole interactions. A first-principle-based thermal transport model is implemented to explain the low-temperature transport measurements, where the anomalous reduction is attributed to phonon-spin resonant scattering. The interplay between spins and phonons is also captured using high-resolution inelastic x-ray scattering (IXS) measurements of phonon linewidths. Our results provide insights into the phonon interactions with the magnetic excitations governing DJT effect and impacting the low-temperature thermal transport processes in this material system. Furthermore, these findings have implications for understanding low-temperature thermal transport and magnetic properties in advanced materials for information processing and energy applications.

36 - MATERIALS SCIENCE↗

Speciation of residual carbon contained in UO{sub 2}

UO{sub 2} powders were synthesized thanks to oxalic precipitation (platelet morphology) and sol-gel route and completely characterized. A secondary phase was found depending on the calcination atmospheres. This phase has been identified by Raman spectroscopy as graphitic material (i.e. carbon-based secondary compound) and quantified by thermogravimetric analyses. Its amount varies with the calcination atmosphere. The presence of this secondary phase has no significant effect on the lattice parameter and its specific surface area. - Graphical abstract: Figure 2: Raman spectroscopy of the three UO{sub 2} powders and of the dissolution residues.

36 MATERIALS SCIENCE↗

Effect of Sodium on the Catalytic Properties of VOx/CeO2 Catalysts for Oxidative Dehydrogenation of Methanol

A series of VOx/CeO2 catalysts with various sodium loadings (Na/V ratio from 0 to 1) has been studied for oxidative dehydrogenation (ODH) of methanol. The effect of sodium on the surface structure, redox properties, and surface acidity/basicity of VOx/CeO2 was investigated using hydrogen temperature-programmed reduction (H2-TPR), Raman spectroscopy, and Diffuse Reflectance Infrared Fourier Transform spectroscopy (DRIFT). The experimental results indicate that the effect of sodium on VOx/CeO2 is highly dependent on the Na/V ratio. At a low Na/V ratio (Na/V<0.25), sodium addition only slightly decreases the redox properties of VOx/CeO2 and has little effect on its activity and selectivity to formaldehyde, even though the Brönsted acidity is almost completely eliminated at a Na/V ratio of 0.25. At a high Na/V ratio (Na/V>0.25), sodium addition greatly alters the nature of the active sites by V-O-Ce bond cleavage and V-O-Na bond formation, leading to significantly reduced activity of the VOx/CeO2 catalysts. At Na/V>0.25, the selectivity to formaldehyde also decreases with increasing Na/V ratio due to: (1) the suppressed reducibility of VOx, and (2) increased basicity leading to increased CO2.

Environmental Molecular Sciences Laboratory↗

Geometric effects in the effective-mass theory and topological optical superlattices

Cold atoms tailored by an optical lattice have become a fascinating arena for simulating quantum physics. In this area, one important and challenging problem is creating effective spin-orbit coupling (SOC), especially for fashioning a cold atomic gas into a topological phase, for which prevailing approaches mainly rely on the Raman coupling between the atomic internal states and a laser field. Herein, a strategy for realizing effective SOC is proposed by exploiting the geometric effects in the effective-mass theory, without resorting to internal atomic states. Furthermore, it is shown that the geometry of Bloch states can have nontrivial effects on the wave-mechanical states under external fields, leading to effective SOC and an effective Darwin term, which have been neglected in the standard effective-mass approximation. It is demonstrated that these relativisticlike effects can be employed to introduce effective SOC in a two-dimensional optical superlattice, and induce a nontrivial topological phase.

74 ATOMIC AND MOLECULAR PHYSICS↗

Modification of surface functionality and interlayer spacing of multi-walled carbon nanotubes using {gamma}-rays

The surface functionality and interlayer spacing changes induced by {gamma}-ray irradiation were investigated in multi-walled carbon nanotubes (MWCNTs). The modification effect of MWCNTs irradiated in air and epoxy chloropropane (ECP) was characterized by x-ray photoelectron spectroscopy, Raman spectroscopy, and x-ray diffraction. The results indicated that {gamma}-ray irradiation in two different media improved the amount of oxygen-containing functional groups on nanotube surface, and the irradiation in ECP was more efficient. Compared with the pristine MWCNTs, the MWCNTs irradiated in air exhibited a decrease in width of G band and intensity ratio of D to G band in the Raman spectra and an increase in intensity and diffraction angle of (002) characteristic x-ray peak. However, the MWCNTs tended to show the opposite behaviors in Raman spectra and x-ray diffraction patterns after they were irradiated in ECP. This preliminary study suggests that {gamma}-ray irradiation in air can meaningfully decrease the interlayer distance of MWCNTs and improve the graphitization of MWCNTs, while irradiation in ECP disorders and breaks the structure of MWCNTs. It is worth expecting that MWCNTs can be functionalized by {gamma}-rays in reactive liquid and also be employed for preventing {gamma}-ray radiation from reaching sensitive materials at least for short term experiments in air.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Amorphization and reduction of thermal conductivity in porous silicon by irradiation with swift heavy ions

In this article, we demonstrate that the thermal conductivity of nanostructured porous silicon is reduced by amorphization and also that this amorphous phase in porous silicon can be created by swift (high-energy) heavy ion irradiation. Porous silicon samples with 41%-75% porosity are irradiated with 110 MeV uranium ions at six different fluences. Structural characterisation by micro-Raman spectroscopy and SEM imaging show that swift heavy ion irradiation causes the creation of an amorphous phase in porous Si but without suppressing its porous structure. We demonstrate that the amorphization of porous silicon is caused by electronic-regime interactions, which is the first time such an effect is obtained in crystalline silicon with single-ion species. Furthermore, the impact on the thermal conductivity of porous silicon is studied by micro-Raman spectroscopy and scanning thermal microscopy. The creation of an amorphous phase in porous silicon leads to a reduction of its thermal conductivity, up to a factor of 3 compared to the non-irradiated sample. Therefore, this technique could be used to enhance the thermal insulation properties of porous Si. Finally, we show that this treatment can be combined with pre-oxidation at 300 Degree-Sign C, which is known to lower the thermal conductivity of porous Si, in order to obtain an even greater reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon spectrum of $\mathrm{Pr_2Zr_2O_7}$ and $\mathrm{Pr_2Ir_2O_7}$ as evidence of coupling of the lattice with electronic and magnetic degrees of freedom

Magnetic materials with pyrochlore crystal structure form exotic magnetic states due to the high lattice frustration. Here in this work we follow the effects of coupling of the lattice and electronic and magnetic degrees of freedom in two praseodymium-based pyrochlores $\mathrm{Pr_2Zr_2O_7}$ and $\mathrm{Pr_2Ir_2O_7}$. In either of these materials, the presence of magnetic interactions does not lead to magnetically ordered low temperature states; however, their electronic properties are different. A comparison of Raman phonon spectra of $\mathrm{Pr_2Zr_2O_7}$ and $\mathrm{Pr_2Ir_2O_7}$ allows us to identify magnetoelastic coupling in $\mathrm{Pr_2Zr_2O_7}$ that elucidates its magnetic properties at intermediate temperatures and allows us to characterize phonon-electron scattering in the semimetallic $\mathrm{Pr_2Ir_2O_7}$. We also show that the effects of random disorder on the Raman phonon spectra is small.

36 MATERIALS SCIENCE↗

Partial recovery of the magnetoelectrical properties of AlGaN/GaN-based micro-Hall sensors irradiated with protons

The effect of annealing on the magnetoelectrical properties of proton-irradiated micro-Hall sensors at an energy of 380 keV and very high proton fluences was studied. Recovery of the electron mobility and a decrease in the sheet resistance of the annealed micro-Hall sensors, as well as an enhancement in their magnetic sensitivity were reported. Trap removal and an improvement in the crystal quality by removing defects were confirmed through current–voltage measurements and Raman spectroscopy, respectively.

36 MATERIALS SCIENCE↗

Multivariate Analysis To Quantify Species in the Presence of Direct Interferents: Micro-Raman Analysis of HNO 3 in Microfluidic Devices

Microfluidic devices are a growing field with significant potential for application to small scale processing of solutions. Much like large scale processing, fast, reliable, and cost effective means of monitoring the streams during processing are needed. Here we apply a novel Micro-Raman probe to the on-line monitoring of streams within a microfluidic device. For either macro or micro scale process monitoring via spectroscopic response, there is the danger of interfering or confounded bands obfuscating results. By utilizing chemometric analysis, a form of multivariate analysis, species can be accurately quantified in solution despite the presence of overlapping or confounded spectroscopic bands. This is demonstrated on solutions of HNO 3 and NaNO 3 within micro-flow and microfluidic devices.

Lines, Amanda M.↗

Deformation Mechanisms of Vertically Stacked WS 2 /MoS 2 Heterostructures: The Role of Interfaces

Here, the mechanical and optical properties generated due to the stacking of different atomically thin materials have made it possible to tune and engineer these materials for next-generation electronics. The understanding of the interlayer interactions in such stacked structures is of fundamental interest for structure and property correlation. Here, a combined approach of in situ Raman spectroscopy and mechanical straining along with molecular dynamics (MD) simulations has been used to probe one such interface, namely, the WS 2 /MoS 2 heterostructure. Vertical heterostructures on poly(methyl methacrylate), when flexed, showed signs of decoupling at 1.2% strain. Theoretical calculations showed strain-induced stacking changes at 1.75% strain. The sliding characteristics of layers were also investigated using scanning probe microscopy based nanoscratch testing, and the results are further supported by MD simulations. The present study could be used to design future optoelectronic devices based on WS 2 /MoS 2 heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hard Ferromagnetism Down to the Thinnest Limit of Iron-Intercalated Tantalum Disulfide

Two-dimensional (2D) magnetic crystals hold promise for miniaturized and ultralow power electronic devices that exploit spin manipulation. In these materials, large, controllable magnetocrystalline anisotropy (MCA) is a prerequisite for the stabilization and manipulation of long-range magnetic order. In known 2D magnetic crystals, relatively weak MCA typically results in soft ferromagnetism. Furthermore, we demonstrate that ferromagnetic order persists down to the thinnest limit of Fe x TaS 2 (Fe-intercalated bilayer 2H-TaS 2 ) with giant coercivities up to 3 T. We prepare Fe-intercalated TaS 2 by chemical intercalation of van der Waals-layered 2H-TaS 2 crystals and perform variable-temperature transport, transmission electron microscopy, and confocal Raman spectroscopy measurements to shed new light on the coupled effects of dimensionality, degree of intercalation, and intercalant order/disorder on the hard ferromagnetic behavior of Fe x TaS 2 . More generally, we show that chemical intercalation gives access to a rich synthetic parameter space for low-dimensional magnets, in which magnetic properties can be tailored by the choice of the host material and intercalant identity/amount, in addition to the manifold distinctive degrees of freedom available in atomically thin, van der Waals crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibrational fingerprints of ferroelectric HfO 2

Hafnia (HfO 2 ) is a promising material for emerging chip applications due to its high-κ dielectric behavior, suitability for negative capacitance heterostructures, scalable ferroelectricity, and silicon compatibility. The lattice dynamics along with phononic properties such as thermal conductivity, contraction, and heat capacity are under-explored, primarily due to the absence of high quality single crystals. Herein, we report the vibrational properties of a series of HfO 2 crystals stabilized with yttrium (chemical formula HfO2: xY, where x = 20, 12, 11, 8, and 0%) and compare our findings with a symmetry analysis and lattice dynamics calculations. We untangle the effects of Y by testing our calculations against the measured Raman and infrared spectra of the cubic, antipolar orthorhombic, and monoclinic phases and then proceed to reveal the signature modes of polar orthorhombic hafnia. This work provides a spectroscopic fingerprint for several different phases of HfO 2 and paves the way for an analysis of mode contributions to high-κ dielectric and ferroelectric properties for chip technologies.

36 MATERIALS SCIENCE↗

Elucidation of Ce/Zr ratio effects on the physical properties and catalytic performance of CuO x /Ce y Zr 1− y O 2 catalysts

Although cerium oxide (CeO 2 ) is widely used as a catalyst support, its limited defect sites and surface oxygen vacancy/mobility should be improved. The incorporation of zirconium (Zr) in the cerium (Ce) lattice is shown to increase the number of oxygen vacancies and improve catalytic activity. Using a fixed surface density (SD) of copper (∼2.3 Cu atoms per nm 2 ) as a surface species, the role of the support (Ce y Zr 1−y O 2 (y = 1.0, 0.9, 0.6, 0.5, and 0.0)) and defect site effects in the CO oxidation reaction was investigated. Spectroscopic (e.g., Raman, XRD, XPS) and microscopic (e.g., SEM-EDX, HR-TEM) characterization techniques were applied to evaluate the defect sites, crystallite size, lattice parameters, chemical composition, oxidation states of elements and microstructure of the catalysts. Here, the CO oxidation reaction with varied CO : O 2 ratios (1 : 5, 1 : 1, and 1 : 0.5 (stoichiometric)) was used as a model reaction to describe the relationship between the structure and the catalytic performance of each catalyst. Based on the characterization results of Ce y Zr 1−y O 2 materials, the addition of Zr causes physical and chemical changes to the overall material. The inclusion of Zr into the structure of CeO 2 decreased the overall lattice parameter of the catalyst and increased the number of defect sites. The prepared catalysts were able to reach complete CO conversion (∼100%) at low temperature conditions (<200 °C), each showing varied reaction activity. The difference in CO oxidation activity was then analyzed and related to the structure, wherein Cu loading, surface oxygen vacancies, reduction–oxidation ability, CuO x –support interaction and oxygen mobility in the catalyst were the crucial descriptors.

36 MATERIALS SCIENCE↗

Continuous-wave laser annealing of Si-rich oxide: A microscopic picture of macroscopic Si-SiO{sub 2} phase separation

We report on the first observation of the macroscopic (long-range) Si-SiO{sub 2} phase separation in Si-rich oxide SiO{sub x}(x<2) obtained by continuous-wave laser annealing of free-standing SiO{sub x} films. The effect is analyzed by a unique combination of microscopic methods (Raman, transmission, photoluminescence, and infrared spectroscopy, transmission electron microscopy, electron energy loss spectroscopy, and x-ray photoelectron spectroscopy). Three regions can be distinguished on a SiO{sub x} free-standing film after 488 nm laser annealing at intensities above {approx}10{sup 4} W cm{sup -2}: central spot, ring around the central spot, and pristine film outside the irradiated area. In the pristine SiO{sub x} material, small Si nanocrystals (Si-nc) (diameters of a few nanometer) are surrounded by SiO{sub 2} with an addition of residual suboxides, the Si-nc being produced by annealing at 1100 deg. C in a furnace. The central spot of the laser-annealed area (up to {approx}30 {mu}m wide in these experiments) is practically free of Si excess and mainly consists of amorphous SiO{sub 2}. The ring around the central spot contains large spherical Si-nc (diameters up to {approx}100 nm) embedded in amorphous SiO{sub 2} without the presence of suboxides. Laser-induced temperatures in the structurally modified regions presumably exceed the Si melting temperature. The macroscopic Si-SiO{sub 2} phase separation is connected with extensive diffusion in temperature gradient leading to the Si concentration gradient. The present work demonstrates the advantages of high spatial resolution for analysis in materials research.

36 MATERIALS SCIENCE↗