Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Temperature-Dependent Thermal and Mechanical Properties of a Wire Arc Additively Manufactured Low Transformation Temperature Steel

Recent research has studied the use of low transformation temperature (LTT) martensite steel as feedstock for wire arc additive manufacturing (WAAM) and low tensile residual stresses or compressive residual stresses were detected in the printed walls. These residual stress states help to improve printed product properties such as fatigue strength and corrosion resistance. However, the thermal and mechanical properties of WAAM printed LTT martensite steel walls are largely unknown. In this work, a printed LTT martensite steel was characterized for its thermal, metallurgical, and mechanical behavior at room and elevated temperatures. The temperature-dependent specific heat capacity, thermal expansion, atomic lattice spacing, and tensile properties were measured during both heating and cooling and related to observed microstructural features and computational thermodynamics predictions. These results revealed a large hysteresis in the martensitic transformation, with a martensite start temperature of 240 °C and austenite start temperature of 680 °C. Additional thermal cycles and specimen orientation did not affect the printed specimen austenite and martensite transformations. However, it was observed that the printed metal may exhibit tempering embrittlement at about 350 °C but further studies are needed to confirm that. Further, these results suggest that a temperature control of 250 °C to 350 °C during WAAM is needed to maximize the stress reduction potential of the LTT250 martensite steel. Opportunities for future implementation of LTT martensite steels and optimization of additive manufacturing process conditions are identified.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermo-hydraulic steam pipe models for district heating simulations: Simplifications to balance accuracy and simulation speed

Steam piping networks are essential for optimizing performance in industrial processes and district heating systems. However, dynamic models that balance thermo-hydraulic accuracy with computational efficiency remain limited. In response, this paper presents a new discretized steam pipe model based on the plug flow approach, capturing key thermo-hydraulic behaviors while simplifying steam phase change processes. Implemented in Modelica, the model accurately calculates temperature and pressure distributions along steam pipelines. To improve computational efficiency for district-scale simulations, five model simplifications are introduced: lumped thermo-hydraulic functions, empirical correlations, fluid state approximations, steady-state dynamics and inclusion of flow derivatives. These simplified models achieve 85%-98% accuracy in predicting pressure drop and condensation losses, including dynamic condensate behavior during pipe warm-up—a factor often overlooked in existing models. The models support diverse network configurations, scaling effectively to systems with multiple distribution pipes and connected building loads. Discrete models provide detailed insights but exhibit a cubic increase in simulation time as the network scales by N connected building O(N 2.42 ). In contrast, lumped models simulate 10–28 times faster than discrete, offering quadratic scaling of simulation time O(N 1.73 ). However, they still require 6 times more computation time than a lossless network, highlighting the inherent computational challenges of modeling compressible fluid flow. In conclusion, the steady-state lumped variant, with its near-linear scalability in computational time O(N 1.01 ), emerges as an efficient solution for preliminary design evaluations and extensive parametric studies.

15 GEOTHERMAL ENERGY↗
DOE OSTI2025

Enhancing biomass flowability for entrained flow Gasification: The role of densification and torrefaction

Gasification presents a key strategy in addressing future energy demands while minimizing environmental impact. This has been recognized as a promising method to convert biomass to higher value products such as biofuels or hydrogen. Among gasification technologies, high-temperature and high-pressure reactors, particularly the R-GAS® system, emerge as an advanced option boasting superior conversion efficiency. However, akin to conventional high-temperature and high-pressure gasifiers, R-GAS® necessitates small particle sizes for optimal carbon conversion, a requirement yet to be fully explored for biomass. Hence, this study investigated the effectiveness of combined mechanical and thermal preprocessing techniques in modifying the physicochemical properties of biomass to suit gasification systems. Mechanical techniques including densification and pulverization, alongside thermal techniques such as torrefaction and steam explosion, were examined. The results demonstrate that torrefaction fosters producing of uniform granular material, enhancing flowability and reducing energy requirements for pulverization compared to steam explosion. Notably, torrefied corn stover exhibited lower internal friction angles and effective cohesion (40.09 ± 0.22° and 0.56 ± 0.01 kPa, respectively) compared to steam exploded corn stover (41.87 ± 0.65° and 0.83 ± 0.06 kPa, respectively), indicative of improved flowability. Additionally, pulverization of torrefied corn stover required approximately 16 % less energy than steam exploded corn stover and 91 % less energy than raw corn stover. Furthermore, the torrefaction-induced alterations in particle size, shape, and packing densities emphasize its potential to optimize flow and handling processes for gasification. These findings underline that densification followed by torrefaction effectively addresses biomass variability, leading to more efficient and sustainable energy conversion.

09 - BIOMASS FUELS↗
DOE OSTI2025

Near-infrared spectroscopy as a green analytical tool for sustainable biomass characterization for biofuels and bioproducts: An overview

Biomass, a widely used renewable energy source, requires characterization to optimize biofuel and bioproduct processes, customize feedstocks, and ensure economic and environmental sustainability. Conventional wet-chemistry methods for biomass analysis are slow, expensive, and require significant reagents and skilled personnel. In contrast, near-infrared (NIR) spectroscopy, a faster, cost-effective, and reagent-free green technology, enables non-destructive biomass analysis with minimal sample preparation. This study provides an overview of the fundamentals of NIR spectroscopy and explores its recent applications for analyzing various biomass properties important to the biofuel and bioproduct industry. The study also critically evaluates the challenges and opportunities of using NIR spectroscopy for biomass analysis. This review aims to guide future research for rapid and high throughput characterization of biomass in the biomass industry, supporting the United Nations’ sustainable development goal (SDG) 7: producing affordable and sustainable energy.

Biofuels↗
DOE OSTI2022

Synthesis of wafer-scale SWCNT forests with remarkably invariant structural properties in a bulk-diffusion-controlled kinetic regime

Robust synthesis of vertically aligned carbon nanotubes (VACNT) at large scale is required to accelerate deployment of numerous cutting-edge devices to emerging commercial applications. To address this need, this work demonstrates that the structural characteristics of single-walled CNTs (SWCNTs) produced in a growth regime dominated by bulk diffusion of the gaseous carbon precursor are remarkably invariant over a broad range of process conditions (precursor concentration increased up to 30-fold, catalyst substrate area from 1 cm 2 to 180 cm 2 , growth pressure from 20 to 790 mbar, and gas flowrates up to 8-fold). A simple growth kinetics model is derived that accounts for both reactant bulk diffusion and competing byproduct formation in the presence of excess hydrogen, which quantitatively reproduces the experimental data in the entire isothermal parameter space. The model enables critical predictions for process scale-up optimization including a potential 6-fold increase in CNT production rate, a ~90% carbon conversion efficiency in select conditions, and elimination of reaction rate decay observed at high pressures by using a hydrogen-free growth environment. This model-guided opportunity to substantially improve synthesis throughput and efficiency, in conjunction with the remarkably invariant CNT properties, is appealing for reliable VACNT device fabrication at both small and industrial scales.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Gaussian Process-Based extended Goldak heat source model for finite element simulation of laser powder bed fusion additive manufacturing process

In this study, laser powder bed fusion (L-PBF) additive manufacturing (AM) is a key enabling technology to manufacture highly complex and integrated metallic structures. In L-PBF AM process, the melting of the metal powders and the layers underneath can be governed by either “conduction mode” or “keyhole mode”, with the keyhole mode reportedly leading to porosity and decreased strength and ductility by many studies. In part scale simulations, finite element (FE) model is often used to study the temperature distribution during printing and to predict the residual stress, where a volumetric heat flux with a Gaussian or a double ellipsoidal (Goldak) distribution is often applied as the laser heat source. However, the above heat source models can only capture the melt pool shape in the conduction mode, and fail to capture the transition to keyhole melting mode when the process parameters change. To overcome this inaccuracy, an extended Goldak heat source model is proposed by introducing a laser penetration term as a function of laser parameters obtained from a Gaussian-Process (GP) model. The model is validated by “2D pad” AlSi10Mg L-PBF experiments under a wide range of laser power, scan speed, and laser focus offset, and the results show the model successfully captures the measured melt pool shape in all conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mathematical Programming Models for Shale Oil & Gas Development: A Review and Perspective

Here, in this paper, we provide a comprehensive review of mathematical programming models for shale oil & gas development, and we offer a perspective on outstanding research opportunities. We distinguish contributions in five major topic areas, namely: (1) development planning, (2) water management, (3) production optimization, (4) supplies, gathering & processing, and (5) life cycle analysis & sustainability. We highlight how various types of mathematical programming models (i.e., linear programs, nonlinear programs, mixed-integer linear programs, mixed-integer nonlinear programs) have been proposed primarily by the Process Systems Engineering community to address the respective decision-making problems, and we highlight instances of successful deployment in industry. Finally, based on a critical assessment of the existing body of work, we identify opportunities for future research across the major topic areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Influence of scan strategy on porosity and microstructure of Ti-6Al-4V fabricated by electron beam powder bed fusion

Ti-6Al-4V is of high value in biomedical, aerospace, and industrial sectors and is ideal for additive manufacturing (AM) because of its poor machinability. In electron beam powder bed fusion of Ti-6Al-4V, a raster scan is commonly used and often results in porosity that is detrimental to the fatigue strength. In this paper, we demonstrate that spot melting can significantly minimize porosity but produces a coarser microstructure compared to raster melting. Process parameters can be optimized to achieve minimal porosity with tailored microstructures. A finite element method was used to rationalize these observations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Understanding fundamental effects of Cu impurity in different forms for recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode materials

When identifying and developing lithium ion battery recycling technologies, understanding the role of impurities is always a concern as they may have an impact on electrochemical performance, material stability, or lifetime for recovered active materials. In this work we show that Cu impurity in different forms could play very different roles on the recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622). Cu metal impurity could easily short the cell, while Cu ion impurity could play a positive role due to partially substitution of the Ni 2+ sites to lower the cation mixing degree. In specific, NCM622 material with certain amount (0.34 at%) of Cu ion impurity delivers high initial specific charge/discharge capacity of 211.8 and 186.0 mAh g -1 at 0.05 C, which are 12.2 and 14.1 mAh g -1 higher than those of virgin NCM622 cathode. Moreover, a superior retention capacity of 171.3 mAh g -1 after 90 cycles at 0.33 C, and striking rate capability are achieved in this NCM622 cathode sample. These results clearly indicate that Cu metal impurity should be avoided and the ionic Cu impurity should be controlled with optimal concentration during recycling process for spent LIBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Modeling and experimental validation of a W f /W-fabrication by chemical vapor deposition and infiltration

Tungsten (W) has a unique combination of excellent thermal properties, low sputter yield, low hydrogen retention, and acceptable activation. Therefore, W is presently the main candidate for the first wall material in future fusion devices. However, its intrinsic brittleness and its further embrittlement during operation bears the risk of a sudden and catastrophic component failure. As a countermeasure, tungsten fiber-reinforced tungsten (W f /W) with extrinsic toughening is being developed. A possible synthesis route is chemical vapor deposition (CVD) using heated W fabrics as substrate. The challenge is that the growing CVD-W can isolate domains from precursor access leading to strength-reducing pores. To deepen the process understanding and to optimize the CVD parameters, models were developed with COMSOL Multiphysics and validated experimentally. W deposition rate equations as function of the temperature and the partial pressures of the precursors H 2 and WF 6 were experimentally validated in previous work. In the present article, these equations are applied to obtain partial pressures within the CVD reactor. The results are taken as input for transient simulations in the microscale, in which W coatings, growing onto multiple adjacent W fibers, were simulated via mesh deformation and remeshing. The surface-to-surface contact of the W coatings and the corresponding potential pore formation were simulated by implementing sophisticated deposition rate stop conditions. Within the measuring uncertainties of ≃ ±1%, the models are validated successfully by experimental comparison regarding the deposition rate, pore structure, and relative densities ranging from 0.6 to 0.9.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Non-Covalent Interactions and Helical Packing in Thiophene-Phenylene Copolymers: Tuning Solid-State Ordering and Charge Transport for Organic Field-Effect Transistors

In this study, we introduce two thiophene-phenylene-thiophene (TPT) polymers designed to leverage noncovalent intramolecular interactions to regulate main-chain conformation and enhance solid-state ordering. By incorporating unsubstituted thiophene (T) or bithiophene (2T) units, we reveal striking divergence in the thermal, morphological, and optoelectronic properties of the resulting films, facilitated by these noncovalent interactions. Using a combination of computational and experimental approaches, we show that annealing yields remarkably different polymer conformations and, consequently, charge transport properties. TPT-T undergoes a significant structural transformation, adopting a more planar backbone conformation and a highly crystalline, edge-on molecular orientation. In contrast, the introduction of a single additional thiophene unit in TPT-2T leads to a more isotropic molecular orientation with a slight preference for face-on alignment, resulting in a heterogeneous film structure that hinders charge transport despite achieving tighter molecular packing. Remarkably, despite being composed of achiral components, TPT-2T develops chirality upon annealing, indicating the formation of a helical conformation. Organic field-effect transistor measurements reveal that the well-ordered alignment in annealed TPT-T films results in higher charge carrier mobility and a narrower distribution of mobility values than in TPT-2T. These findings provide critical insights into the structure−property relationships of conjugated polymers, offering guidance for optimizing molecular design and processing strategies for highperformance organic electronic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Insights into Copper Sulfide Formation from Cu and S K edge XAS and DFT studies

An understanding of the fundamentals of the reaction between CuO with trace amounts of H 2 S to form CuS products is critical for the optimal utilization of this process in sulfur removal applications. Unfortunately, CuS is a complex material, featuring various Cu 2-x S compounds (with 0 ≤ x ≤ 1), distorted crystal phases, and varying electronic structures and coordination environments of Cu and S ions. In this work, we combine ex situ and in situ X-ray absorption spectroscopy (XAS) at S and Cu K edges, fixed bed sorption experiments, DFT simulations, and other characterization techniques to speciate the CuS products formed at different temperatures (298–383 K) and from CuO sorbents with different crystallite sizes (2.8–40 nm). The results of our analysis identify the formation of a distorted CuS layer at the surface of CuO crystals with disulfide groups with shorter Cu–S bonds and higher delocalization of the positive charge of the Cu center into (S 1– )2. This distorted CuS layer dominates the XAS signal at lower temperatures (298–323 K) and at the initial stages of sulfidation at higher temperatures (353 and 383 K) where conversion is low (<40%). First-principles atomistic simulations confirm the thermodynamic favorability of the formation of surface (S 1– )2 on both CuO (111) and ($\bar{1}11$) surfaces, providing further support for our experimental observations. Furthermore, these simulations reveal that the presence of disulfide bonds stabilized surface hydroxyl groups, leading to lower Gibbs Free Energies of their surface migration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The General Atomic and Molecular Electronic Structure System (GAMESS): Novel Methods on Novel Architectures

The primary focus of GAMESS over the last 5 years has been the development of new high-performance codes that are able to take effective and efficient advantage of the most advanced computer architectures, both CPU and accelerators. These efforts include employing density fitting and fragmentation methods to reduce the high scaling of well-correlated (e.g., coupled-cluster) methods as well as developing novel codes that can take optimal advantage of graphical processing units and other modern accelerators. Because accurate wave functions can be very complex, an important new functionality in GAMESS is the quasi-atomic orbital analysis, an unbiased approach to the understanding of covalent bonds embedded in the wave function. Finally, best practices for the maintenance and distribution of GAMESS are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Diffusion-Limited Kinetics in Reactive Systems

A proper representation of chemical kinetics is vital to understanding, modeling, and optimizing many important chemical processes. In liquid and surface phases, where diffusion is slow, the rate at which the reactants diffuse together limits the overall rate of many elementary reactions. Commonly, the textbook Smoluchowski theory is utilized to estimate effective rate coefficients in the liquid phase. On surfaces, modelers commonly resort to much more complex and expensive Kinetic Monte Carlo (KMC) simulations. Here, in this study, we extend the Smoluchowski model to allow the diffusing species to undergo chemical reactions and derive analytical formulas for the diffusion-limited rate coefficients for 3D, 2D, and 2D/3D interface cases. With these equations, we are able to demonstrate that when species react faster than they diffuse they can react orders of magnitude faster than predicted by Smoluchowski theory, through what we term “the reactive transport effect”. We validate the derived steady-state equations against particle Monte Carlo (PMC) simulations, KMC simulations, and non-steady-state solutions. Furthermore, using PMC and KMC simulations, we propose corrections that agree with all limits and the computed data for the 2D and 2D/3D interface steady-state equations, accounting for unique limitations in the associated derived equations. Additionally, we derive equations to handle couplings between diffusion-limited rate coefficients in reaction networks. We believe these equations should make it possible to run much more accurate mean-field simulations of liquids, surfaces, and liquid–surface interfaces accounting for diffusion limitations and the reactive transport effect.

Johnson, Matthew Sean↗
DOE OSTI2025

Passivation and Degradation of Sulfur-Treated Silicon Surfaces for Photovoltaics

Sulfur-based passivation for silicon surfaces using H2S gas is an alternative passivation method to reduce the thermal budget for Si photovoltaics. To understand the impact of the high-quality passivation and an observed passivation efficiency decrease after air exposure, we have studied the chemical surface structure by X-ray photoelectron spectroscopy (XPS), X-ray Auger electron spectroscopy (XAES), and S and Si L2,3 X-ray emission spectroscopy (XES). On the S-passivated silicon surfaces, we find the formation of S–Si bonds, in addition to some Si–O bonds. Upon air exposure, sulfur partially desorbs from the Si surface and an increased presence of Si–O and S–O bonds is observed. We identify that well-defined S–Si bonds are crucial to maintain high-quality surface passivation for Si photovoltaics, which allows further optimization of the fabrication process for S-based passivation on silicon.

Hua, Amandee↗
DOE OSTI2024

Adsorption Thermodynamics for Process Simulation

Adsorption has rapidly evolved in recent decades and is an established separation technology extensively practiced in gas separation industries and others. However, rigorous thermodynamic modeling of multicomponent adsorption equilibrium remains elusive, and industrial practitioners rely heavily on expensive and time-consuming trial-and-error pilot studies to develop adsorption units. Here, this article highlights the need for rigorous adsorption thermodynamic models and the limitations and deficiencies of existing models such as the extended Langmuir isotherm, dual-process Langmuir isotherm, and adsorbed solution theory. It further presents a series of recent advances in the generalization of the classical Langmuir isotherm of single-component adsorption by deriving an activity coefficient model to account for the adsorbed phase adsorbate–adsorbent interactions, substituting adsorbed phase adsorbate and vacant site concentrations with activities, and extending to multicomponent competitive adsorption equilibrium, both monolayer and multilayer. Requiring a minimum set of physically meaningful model parameters, the generalized Langmuir isotherm for monolayer adsorption and the generalized Brunauer–Emmett–Teller isotherm for multilayer adsorption address various thermodynamic modeling challenges including adsorbent surface heterogeneity, isosteric enthalpies of adsorption, BET surface areas, adsorbed phase nonideality, adsorption azeotrope formation, and multilayer adsorption. Also discussed is the importance of quality adsorption data that cover sufficient temperature, pressure, and composition ranges for reliable determination of the model parameters to support adsorption process simulation, design, and optimization.

09 BIOMASS FUELS↗
DOE OSTI2023

Aligned Conjugated Polymer Nanofiber Networks in an Elastomer Matrix for High-Performance Printed Stretchable Electronics

Conjugated polymer films are promising in wearable X-ray detection. However, achieving optimal film microstructure possessing good electrical and detection performance under large deformation via scalable printing remains challenging. Herein, we report bar-coated high-performance stretchable films based on a conjugated polymer P(TDPP-Se) and elastomer SEBS blend by optimizing the solution-processing conditions. The moderate preaggregation in solution and prolonged growth dynamics from a solvent mixture with limited dissolving capacity is critical to forming aligned P(TDPP-Se) chains/crystalline nanofibers in the SEBS phase with enhanced π–π stacking for charge transport and stress dissipation. The film shows a large elongation at break of >400% and high mobilities of 5.29 cm 2 V –1 s –1 at 0% strain and 1.66 cm 2 V –1 s –1 over 500 stretch–release cycles at 50% strain, enabling good X-ray imaging with a high sensitivity of 1501.52 μC Gy air –1 cm –2 . Finally, our work provides a morphology control strategy toward high-performance conjugated polymer film-based stretchable electronics.

36 MATERIALS SCIENCE↗