Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Practical Application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Satellite broadcasting - Capabilities for public service

Satellite broadcast services to support health-care and educational transmissions must work with small, low-cost terminals in allocated radio-frequency bands. The ATS-6 spacecraft has successfully demonstrated such capability in the bands of non-technical users. It supports interactive television broadcasting to simple, low-cost terminals in a nationwide series of experiments in the delivery of health-care and educational services. ATS-6 achieves this capability with a very large antenna and moderate transmitter power. The coverage limitations inherent in this approach will be overcome by the joint U.S.-Canadian Communications Technology Satellite to be launched in December 1975. The CTS will demonstrate broadcast capability with new, high-power technology in a newly-allocated radio-frequency band. This will make it possible to use smaller antennas, greatly enlarging the area coverage available to the many nontechnical experimenters using CTS for their own needs. A practical application of these technologies is now in development for operational broadcasting services in Japan.

Marsten, R. B.↗

A sensitivity analysis of regional and small watershed hydrologic models

Continuous simulation models of the hydrologic behavior of watersheds are important tools in several practical applications such as hydroelectric power planning, navigation, and flood control. Several recent studies have addressed the feasibility of using remote earth observations as sources of input data for hydrologic models. The objective of the study reported here was to determine how accurately remotely sensed measurements must be to provide inputs to hydrologic models of watersheds, within the tolerances needed for acceptably accurate synthesis of streamflow by the models. The study objective was achieved by performing a series of sensitivity analyses using continuous simulation models of three watersheds. The sensitivity analysis showed quantitatively how variations in each of 46 model inputs and parameters affect simulation accuracy with respect to five different performance indices.

Ambaruch, R.↗

Ion plating with an induction heating source

Induction heating is introduced as an evaporation heat source in ion plating. A bare induction coil without shielding can be directly used in the glow discharge region with no arcing. The only requirement is to utilize an rf inductive generator with low operating frequency of 75 kHz. Mechanical simplicity of the ion plating apparatus and ease of operation is a great asset for industrial applications; practically any metal such as nickel, iron, and the high temperature refractories can be evaporated and ion plated.

Spalvins, T.↗

NASA Earth Resources Survey Symposium. Volume 1-A: Agriculture, environment

A number of papers dealing with the practical application of imagery obtained from remote sensors on LANDSAT satellites, the Skylab Earth resources experiment package, and aircraft to problems in agriculture and the environment were presented. Some of the more important topics that were covered included: range management and resources, environmental monitoring and management, crop growth and inventory, land management, multispectral band scanners, forest management, mapping, marshlands, strip mining, water quality and pollution, ecology.

Source record↗

NASA Earth Resources Survey Symposium. Volume 1-B: Geology, Information Systems and Services

A symposium was conducted on the practical applications of earth resources survey technology including utilization and results of data from programs involving LANDSAT, the Skylab earth resources experiment package, and aircraft. Topics discussed include geological structure, landform surveys, energy and extractive resources, and information systems and services.

Source record↗

Space transportation

User-oriented panels were formed to examine practical applications of information or services derived from earth orbiting satellites. Topics discussed include: weather and climate; uses of communication; land use planning; agriculture, forest, and range; inland water resources; retractable resources; environmental quality; marine and maritime uses; and materials processing in space. Emphasis was placed on the interface of the space transportation system (STS) with the applications envisioned by the user panels. User requirements were compared with expected STS capabilities in terms of availability, carrying payload to orbit, and estimated costs per launch. Conclusions and recommendations were reported.

Source record↗

The reduction of aileron operating force by differential linkage

It is shown that the control force of ordinary ailerons may be reduced to zero over a range of deflections and at a given flight condition by the use of an appropriate differential movement. Approximations to the ideal motion obtainable with a simple linkage are discussed and a chart that enables the selection of an appropriate crank arrangement is presented. Various aspects of the practical application of the system are discussed and it is concluded that a small fixed tab, deflected to trim both ailerons upward, would be advantageous.

Jones, R. T.↗

Study of the extra-ionic electron distributions in semi-metallic structures by nuclear quadrupole resonance techniques

A straightforward self-consistent method was developed to estimate solid state electrostatic potentials, fields and field gradients in ionic solids. The method is a direct practical application of basic electrostatics to solid state and also helps in the understanding of the principles of crystal structure. The necessary mathematical equations, derived from first principles, were presented and the systematic computational procedure developed to arrive at the solid state electrostatic field gradients values was given.

Murty, A. N.↗

NASA Earth Resources Survey Symposium. Volume 2-A: Special session presentations. Plenary summaries

Practical application of earth resources survey data is considered. The utilization and results of data from NASA programs involving LANDSAT, the Skylab Earth Resources Experiment Package, and aircraft, as well as other data acquisition programs are included. User services and requirements and applications in land use, agriculture, coastal zone management, and geology are among the topics covered. For Vol. 1A, see N76-17469.

Source record↗

SEASAT economic assessment. Volume 1: Summary and conclusions

A summary is presented of the economic benefits that can be derived from using the SEASAT Satellite System. A statement of the major findings of case studies of the practical applications of the SEASAT program to the following areas is given: (1) offshore oil and natural gas industry, (2) ocean mining, (3) coastal zones, (4) oil exploration in Arctic regions, (5) ocean fishing, and (6) ports and harbors. Also given is a description of the SEASAT System and its performance. A computer program, used to optimize SEASAT System's costs and operational requirements, is also considered.

Source record↗

A uniformly valid solution for motion about the interior libration point of the perturbed elliptic-restricted problem

Bounded motion about Lagrange collinear libration points is considered for a perturbed elliptic-restricted problem. A practical application is the motion of a satellite near a libration point collinear with the sun and the earth-moon barycenter. Such a system is treated here as an earth-sun-satellite elliptic restricted problem with lunar perturbations. The method of dual time scales is utilized to develop a uniformly valid three-dimensional analytical solution to the satellite's equations of motion. The analytical development applies somewhat generally to that class of four-body problems where the second primary mass is much greater than the first, and the third primary mass is much greater than the second.

Richardson, D. L.↗

Treatment of multiaxial creep-fatigue by strainrange partitioning

Strainrange partitioning is a recently developed method for treating creep-fatigue interaction at elevated temperature. Most of the work to date has been on uniaxially loaded specimens, where as practical applications often involve load multiaxiality. It is shown how the method can be extended to treat multiaxiality through a set of rules for combining the strain components in the three principal directions. Closed hysteresis loops, as well as plastic and creep strain ratcheting are included. An application to hold-time tests in torsion will be used to illustrate the approach.

S S Manson↗

Facts and fiction of learning systems

The methodology that will provide the updated precision for the hardware control and the advanced decision making and planning in the software control is called learning systems and intelligent control. It was developed theoretically as an alternative for the nonsystematic heuristic approaches of artificial intelligence experiments and the inflexible formulation of modern optimal control methods. Its basic concepts are discussed and some feasibility studies of some practical applications are presented.

Saridis, G. N.↗

The N.A.S.A. earth and ocean dynamics programme

Practical applications of NASA space systems, science, and technology to the study of oceans and solid earth are discussed. Goals involving earth dynamics include earthquake hazard assessment and alleviation, and global surveying and mapping, while goals involving ocean dynamics include the determination of ocean currents and circulation, and the monitoring of ocean surface conditions. Satellites used to obtain data are described, and projects such as the study of open ocean tides and earth motion determination are reviewed, with consideration given to the techniques (e.g., laser ranging, satellite-to-satellite track) used in these studies. Several physical phenomena, the extent to which they presently can be measured, and possible future requirements for more accurate measurements are examined.

Vonbun, F. O.↗

Properties of satellite orbits - Ephemerides, dynamical constants, and satellite phenomena

A short account is given of the history of the observation of the Galilean satellites, with an emphasis on early orbital work and practical applications thereof to world mapping and navigation. The general character of satellite motion is described from a geometric and physical point of view without reference to mathematics. This is followed by a similar discussion of ordinary and mutual satellite phenomena. The accuracies of published ephemerides are discussed on the basis of the observations and theories available for the various satellites. The ephemeris tables need to be revised and, perhaps, partly replaced by well-documented computer programs. The determination of physical parameters (planetary masses and oblatenesses; masses, sizes, and albedo maps of satellites) from positional observations of satellites and photometric observations of ordinary and mutual satellite phenomena is discussed.

Aksnes, K.↗

Modal characteristics of crossed rectangular waveguides

An integral-eigenvalue problem is formulated for a crossed rectangular waveguide and solved numerically by applying the Ritz-Galerkin method. Theoretical formulas for determining cutoff frequencies and modal-field expressions are obtained for the specific case of a symmetrical rectangular waveguide, cutoff frequencies are calculated numerically, and the results are verified by comparison with available experimental data. The modal fields are expressed in terms of Fourier series for both TE and TM modes. It is found that the bandwidth can be increased to a maximum of 38% when the waveguide dimensions are properly selected and that the numerical results are in agreement with those computed by the method of partial regions. Some practical applications of the modal-field equations are briefly noted.

Lin, F.-L. C.↗

Effect of digitally computed drives on performance of continuous linear systems

The dependence of the Bode response upon digital sample rate for first and second order linear continuous systems driven by a digital computer is derived. Open loop lead compensation introduced within the digital computer in order to increase the system bandwidth is also examined in terms of derived Bode responses. This introduction of lead terms within the digital computer is shown to be effective at operating frequencies below the Nyquist frequency. In most practical applications, empirical determination of these lead coefficients appears to be a sufficient compensation method.

Parrish, R. V.↗

Urban area delineation and detection of change along the urban-rural boundary as derived from LANDSAT digital data

LANDSAT digital multispectral scanner data, in conjunction with supporting ground truth, were investigated to determine their utility in delineation of urban-rural boundaries. The digital data for the metropolitan areas of Washington, D. C.; Austin, Texas; and Seattle, Washingtion; were processed using an interactive image processing system. Processing focused on identification of major land cover types typical of the zone of transition from urban to rural landscape, and definition of their spectral signatures. Census tract boundaries were input into the interactive image processing system along with the LANDSAT single and overlayed multiple date MSS data. Results of this investigation indicate that satellite collected information has a practical application to the problem of urban area delineation and to change detection.

Christenson, J. W.↗