Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electronic and Magnetic Properties of Oligomers and Chains of Poly(benzodifurandione) (PBDF), A Highly Conducting n-Type Polymer

The seminal development of highly electrically conducting polyacetylene via oxidative or reductive treatment (“doping”) has continuously inspired the search for other conducting π-conjugated polymers. Recently, poly(benzodifurandione), PBDF, was reported to have unexpected solubility given the absence of side chains and to exhibit an unprecedented, high electrical conductivity upon reduction (“n-doping”), with protons acting as counterions. Here, we theoretically investigate the electronic and magnetic properties of PBDF by taking long oligomers and one-dimensional (1D) periodic chains as model systems. With the oligomer models, we characterize the formation of polarons and bipolarons in n-doped PBDF. Our results indicate that singlet bipolarons tend to be the energetically most favorable species when protons bind to two closely located carbonyl groups in nearest-neighbor benzodifurandione moieties. The calculations on the 1D periodic chain models show that the positions of the protonated carbonyl groups determine the metallic, semiconducting, or insulating nature of a PBDF chain. When the protonated carbonyl groups are all situated on the same side of a PBDF chain, a stable helical chain configuration is found that exhibits ferromagnetic behavior. Our findings elucidate the mechanism of polaron and bipolaron formation in long oligomers of n-doped PBDF and highlight the fascinating electronic and magnetic properties of periodic 1D chains. Furthermore, these studies also provide a stepping stone for investigations of PBDF thin films, for which two- and three-dimensional structures must be considered.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Coupling of Nondegenerate Topological Modes in Nitrogen Core-Doped Graphene Nanoribbons

Nitrogen core-doping of graphene nanoribbons (GNRs) allows trigonal planar carbon atoms along the backbone of GNRs to be substituted by higher-valency nitrogen atoms. The excess valence electrons are injected into the π-orbital system of the GNR, thereby changing not only its electronic occupation but also its topological properties. We have observed this topological change by synthesizing dilute nitrogen core-doped armchair GNRs with a width of five atoms (N 2 -5-AGNRs). The incorporation of pairs of trigonal planar nitrogen atoms results in the emergence of topological boundary states at the interface between doped and undoped segments of the GNR. These topological boundary states are offset in energy by approximately ΔE = 300 meV relative to the topological end states at the termini of finite 5-AGNRs. Scanning tunneling microscopy (STM) and spectroscopy (STS) reveal that for finite GNRs the two types of topological states can interact through a linear combination of orbitals, resulting in a pair of asymmetric hybridized states. This behavior is captured by an effective Hamiltonian of nondegenerate diatomic molecules, where the analogous interatomic hybridization interaction strength is tuned by the distance between GNR topological modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Characterization of the structure and chemistry of the solid–electrolyte interface by cryo-EM leads to high-performance solid-state Li-metal batteries

Solid-state lithium-metal (Li 0 ) batteries are gaining traction for electric vehicle applications because they replace flammable liquid electrolytes with a safer, solid-form electrolyte that also offers higher energy density and better resistance against Li dendrite formation. Solid polymer electrolytes (SPEs) are highly promising candidates because of their tunable mechanical properties and easy manufacturability; however, their electrochemical instability against lithium metal (Li 0 ), mediocre conductivity, and poorly understood Li 0 /SPE interphases have prevented extensive application in real batteries. In particular, the origin of the low Coulombic efficiency (CE) associated with SPEs remains elusive, as the debate continues as to whether it originates from unfavored interfacial reactions or lithium dendritic growth and dead lithium formation. In this work, we use state-of-the-art cryo-electromicroscopy (cryoEM) imaging and spectroscopic techniques to characterize the structure and chemistry of the interface between Li 0 and a polyacrylate-based SPE. Contradicting the conventional knowledge, we find that no protective interphase forms, owing to the sustained reactions between deposited Li dendrites and polyacrylic backbones and succinonitrile plasticizer. Due to the reaction induced volume change, large amounts of cracks form inside the Li dendrites with a stress corrosion-cracking behavior, indicating that Li0cannot be passivated in this SPE system. Based on this observation, we then introduce additive engineering leveraging on the knowledge of liquid electrolytes, and demonstrate that the Li 0 surface can be effectively protected against corrosion using fluoroethylene carbonate (FEC), leading to densely packed Li 0 domes with conformal and stable solid-electrolyte interphases (SEIs) films. Owing to the high room temperature ionic conductivity of 1.01 mS/cm -1 , the high transference number of 0.57 and the stabilized lithium electrolyte interface, this improved new SPE delivers an excellent lithium plating/stripping CE of 99% and 1800 hours of stable cycling in Li||Li symmetric cells (0.2 mA/cm -2 , 1mAh/cm -2 ). Furthermore, this improved cathodic stability along with the high anodic stability enables record high cycle life of >2000 cycles for Li||LiFePO 4 and >400 cycles for Li||LiCoO 2 full cells.

25 ENERGY STORAGE↗
DOE OSTI2022

Effect of Moisture and Feedstock Variability on the Rheological Behavior of Corn Stover Particles

Continuous feeding, processing, and handling of biomass powders is pivotal to the economic viability of integrated biorefineries. However, current challenges associated with the operational reliability of bulk solids handling and transport greatly impact the process economics and ultimately the widespread commercialization of integrated biorefineries. In this work, we examine the effect of moisture and feedstock variability on the flow behavior of corn stover biomass particles. The total flow energy, compressibility, shear properties, and wall friction angles were measured for corn stover samples A and B containing 0%, 15%, 25%, 50%, and 75% (mass fraction) moisture contents using a FT4 powder rheometer. In general, the flowability of both A and B was reduced when moisture was present as indicated by the stability and variable flow rate, compressibility, and shear tests. The 15% moisture sample had the highest flow energy, revealing the interplay between the increased surface tension and looser packing both of which were caused by liquid bridging. The 75% moisture sample had the highest compressibility and the lowest flowability factor (ff c ). The trend in wall friction angle was found to be dependent upon the surface hydrophobicity of the wall material. The wall friction angle on the hydrophilic, stainless-steel surface increased with moisture and therefore poses additional handling challenges. On the other hand, the wall friction angle on the hydrophobic polymer surfaces were the lowest for samples with intermediate moisture contents. Sample B had greater bulk density, smaller compressibility, and greater flowability than the sample A , as suggested by the compressibility and shear tests. The wall friction angle of sample B was higher than or equal to that of sample A depending on both the type and the surface roughness of the wall material.

09 BIOMASS FUELS↗
DOE OSTI2025

Copper-containing layered oxide cathodes for sodium-ion batteries

Layered transition metal oxides are among the most promising cathode materials for sodium-ion batteries due to their high theoretical capacity, structural tunability, and cost-effectiveness. However, conventional Ni- and Co-based layered oxides are hindered by high raw material costs, limited elemental abundance, and phase instability during electrochemical cycling. Recently, copper has emerged as an attractive alternative transition metal, offering significant advantages in terms of redox activity, structural stabilization, voltage regulation, and rate performance. Unlike Ni and Co, Cu can facilitate unique redox mechanisms and enable more sustainable material design. This review systematically summarizes recent progress on Cu-containing layered sodium oxides, with emphasis on their structural characteristics, electrochemical behavior, and the critical roles that Cu plays within the host lattice. The insights provided herein aim to highlight the potential of Cu-substituted or Cu-containing layered oxides as a viable pathway toward high-performance and resource-accessible SIB cathodes for future energy storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Light-Driven Expansion of Spiropyran Hydrogels

The incorporation of molecular switches in organic structures is of great interest in the chemical design of stimuli-responsive materials that mimic the complex functions of living systems. Merocyanine dyes that convert to spiropyran moieties upon exposure to visible light have been extensively studied as they can be incorporated in hydrated covalent networks that will expel water when this conversion occurs and induce a volumetric shrinkage. We report here on a sulfonatebased water soluble photoswitch that in contrast to the well-known system triggers a volumetric expansion in hydrogels upon exposure to photons. Contraction is in turn observed under dark conditions in a highly reversible manner. The novel behavior of the photoswitch incorporated in the covalent network was also predicted by coarse grain simulations of the system’s chemical structure. Using pH control and polymeric structures that differ in lower critical solution temperature we were able to develop hydrogels with highly tunable volumetric expansion. Furthermore, the novel molecular function of the systems developed here led to materials with the negative phototaxis observed in plants, and can expand the potential use of hydrogels as sensors, soft robots, and actuators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Increasing Branching and Functionalization Decreases Crystallinity and Crystallization Rate in Linear EVOH

Here, we report the crystallization behavior of a linear poly(ethylene-co-vinyl alcohol) (LEVOH) under isothermal crystallization as a function of both OH incorporation and undercooling, and compare the results to conventional branched EVOH. This LEVOH is synthesized by post-polymerization functionalization of polycyclooctene, and it exhibits a half-crystallization time and primary crystallization rate nearly an order of magnitude faster than branched EVOH at ~ 6 mol% OH incorporation. While the LEVOH obtains approximately twice the extent of crystallization compared to the branched equivalent, as OH incorporation increases, the crystallization kinetics and crystallinity of LEVOH decrease. The crystal structure of LEVOH is orthorhombic at low functionalization (≤ 11 mol% OH), a mixture of orthorhombic and hexagonal at moderate functionalization (17 - 21 mol%), and hexagonal at high functionalization (23 %). The LEVOH crystallizes into plates, with crystallite widths ~ 20 - 60 times the crystallite thickness. Ultimately, we show LEVOH crystallizes faster and to a greater extent than commercial branched EVOH, a potential advantage of post-polymerization functionalization as part of polymer-to-polymer upcycling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Zeolite‐Based Catalysts for Conversion of Oxygenated Polymer Waste by Positron Annihilation

Positron Annihilation Lifetime Spectroscopy (PALS) has been employed to investigate the catalysts HZSM-5 and MESO−Y, which play a pivotal role in catalyzing and upgrading plastics, with a primary focus on oxygenated polymers, thereby transforming existing plastic materials into simpler, higher-quality value-added products. Here, in this study, PALS was systematically compared with other complementary analytical techniques. The research outcomes have successfully demonstrated the efficacy of PALS in elucidating the morphology and topology of zeolites at micro/meso-meter scales. The first experiment focuses on H-ZSM-5 zeolite subjected to treatments involving polyurethane and polypropylene. The second experiment delves into H-ZSM-5 zeolites with varying Si/Al ratios, both before and after conversion. The third experiment investigates Y zeolites that are surfactant templated to induce meso-porosity, examining their fresh state as well as their post-conversion condition. The PALS analysis was supplemented by BET (Brunauer-Emmett-Teller) analysis and NMR (Nuclear Magnetic Resonance) spectroscopies. Notably, PALS exhibits superior sensitivity, at the sub-nanometer scale, suggesting its potential as a preferred complementary method for catalysis studies. In conclusion, the integration of PALS into the repertoire of analytical tools enhances our understanding of catalyst behavior and catalytic processes, offering valuable insights for the advancement of plastic recycling and catalysis research.

32 - ENERGY CONSERVATION, CONSUMPTION, AND UTILIZA↗
DOE OSTI2023

Effect of Charged Block Length Mismatch on Double Diblock Polyelectrolyte Complex Micelle Cores

Polyelectrolyte complex micelles are hydrophilic nanoparticles that self-assemble in aqueous environments due to associative microphase separation between oppositely charged blocky polyelectrolytes. In this work, we employ a suite of physical characterization tools to examine the effect of charged block length mismatch on the equilibrium structure of double diblock polyelectrolyte complex micelles (D-PCMs) by mixing a diverse library of peptide and synthetic charged-neutral block polyelectrolytes with a wide range of charged block lengths (25–200 units) and chemistries. Early work on D-PCMs suggested that this class of micelles can only be formed from blocky polyelectrolytes with identical charged block lengths, a phenomenon referred to as chain length recognition. Here, we use salt annealing to create PCMs at equilibrium, which shows that chain length recognition, a longstanding hurdle to repeatable self-assembly from mismatched polyelectrolytes, can be overcome. Interestingly, D-PCM structure–property relationships display a range of values that vary systematically with the charged block lengths and chemical identity of constituent polyelectrolyte pairings and cannot be described by generalizable scaling laws. We discuss the interdependent growth behavior of the radius, ionic pair aggregation number, and density in the micelle core for three chemically distinct diblock pairings and suggest a potential physical mechanism that leads to this unique behavior. By comparing the results of these D-PCMs to the scaling laws recently developed for single diblock polyelectrolyte complex micelles (S-PCMs: diblock + homopolymer), we observe that D-PCM design schemes reduce the size and aggregation number and restrict their growth to a function of charged block length relative to S-PCMs. Understanding these favorable attributes enables more predictive use of a wider array of charged molecular building blocks to anticipate and control macroscopic properties of micelles spanning countless storage and delivery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Multimaterial Aerosol Jet Printed Magnetic Nanocomposites for Microwave Circuits

Here this article demonstrates the process and characterization of additively manufactured polymer-matrix magnetic nanocomposites. These nanocomposites are composed of nickel-zinc ferrite (Ni 0.5 Zn 0.5 Fe 2 O 4 ) nanoparticles in a polyimide matrix. These materials are printed using multimaterial aerosol jet printing where aerosols of nickel-zinc ferrite and polyimide inks are mixed in place to fabricate structures with nonunity relative permeability. To characterize these materials, we use energy-dispersive X-ray spectroscopy to estimate the content of ferrite in the composite, fitted simulation models, and ring resonator measurements to estimate the permeability. In fully aerosol jet printed 1-mm 2 inductors, we demonstrate an increase in inductance density of 40% in a 4.5-turn microstrip spiral inductor using this printed composite. These fully printed inductors demonstrate an inductance density of 4.2-nH/mm 2 . EDS analysis shows films with 18 wt.% Ni 0.5 Zn 0.5 Fe 2 O 4 . Finally, we show microstrip transmission lines on printed composite compared to the same on polyimide subjected to a dc magnetic bias, displaying a magnetic resonance behavior.

42 ENGINEERING↗
DOE OSTI2025

Physically constrained 3D diffusion for inverse design of fiber-reinforced polymer composite materials

Designing fiber-reinforced polymer composites (FRPCs) with a tailored nonlinear stress-strain response is crucial for applications such as energy absorption in crash structures, flexible robotics, and impact-resistant protective gear. However, the inherent complexities of composite materials and the multitude of parameters involved, render traditional design and optimization methods inadequate for achieving effective inverse design of composites. In this paper, we present an AI-based inverse design framework that effectively and efficiently generates FRPCs with targeted nonlinear stress-strain responses. We introduce a physically constrained diffusion model (PC3D_Diffusion) capable of managing the complexities of composite materials and producing detailed, high-quality designs. We propose a loss-guided, learning-free approach to generate physically feasible microstructure designs by explicitly enforcing physical constraints during the generation process. For training purposes, 1.35 million FRPC samples were created, and their corresponding stress-strain curves were computed using established physics-based computational models. The results show that PC3D_Diffusion consistently generates high-quality designs with tailored mechanical behaviors, while guaranteeing compliance with the physical constraints. PC3D_Diffusion advances FRPC inverse design and may facilitate the inverse design of other 3D materials, offering potential applications in industries reliant on materials with custom mechanical properties.

Xu, Pei [Clemson Univ., SC (United States)]↗
DOE OSTI2023

Using Co-Optimized Machine Learned Manifolds for Modeling Chemically Reacting Flows

Chemically reacting flows play a key role in a wide range of engineered systems, from chemical and polymer processing to combustion-based energy conversion technologies. Simulations of these flows involve solving a coupled set of partial differential equations for mass, momentum, energy, and all relevant chemical species in the system. Chemical reaction pathways may be extremely complex and involve hundreds or more intermediate species, with reactions that occur over timescales varying by several orders of magnitude - presenting a significant numerical stiffness challenge. The combination of these factors makes simulation of chemically reacting flows vastly more expensive than nonreactive simulations, and often makes direct solution of the governing equations intractable. It is necessary to apply lower-fidelity models in place of the detailed governing equations in order to reduce computational cost to enable reacting flow simulation tools to be used in the engineering design process. Many of the models employed for this purpose are based on reducing the dimension of the thermochemical state, motivated by the observation that the observed thermochemical states in a system lie on a low-dimensional manifold in thermochemical state space. This behavior occurs due to the fast equilibration of certain reactive and transport processes, and physics-based manifold models rely on idealized assumptions about the balance of timescales and the way in which chemistry and transport are coupled. In this work, we apply a novel method for data-driven manifold-based modeling that can leverage data from high-fidelity reacting flow simulations to improve model accuracy in cases where the physics-based modeling assumptions break down. The approach is designed to be broadly applicable across chemically reacting flow systems but is applied here to turbulent combustion modeling.

machine learning↗
DOE OSTI2021

Al 2 O 3 /TiO 2 coated separators: Roll-to-roll processing and implications for improved battery safety and performance

Heat generation is one of the major concerns with lithium-ion batteries (LIB) while charging them at higher currents, which could inadvertently impact the rate performance and reduce the safety of the cell. Polymer separator is one of the least thermal conductive components of a LIB. In addition, commercial separators for LIB are made from polyolefin membranes that tend to shrink and curl at higher temperatures due to their lower melting temperature (~130 °C). Developing separators with improved thermal stability and higher electrolyte uptake is essential for enhancing the safety as well as the performance of the LIB. In this work, a thin layer of ceramic coatings (Al 2 O 3 and TiO 2 ) is applied on propylene (PP) membrane to improve the thermal stability and electrolyte affinity without compromising the rate performance. A slurry with 100% Al 2 O 3 coated on the polypropylene separator exhibited the best improvement in thermal stability ( shrinkage of 0.6% vs 6.0% for uncoated membrane) and excellent rate performance with 92% capacity retention at 2C. The Al 2 O 3 coated separator demonstrated excellent electrolyte wettability compared to the uncoated membrane. The cross-plane thermal conductivity of the ceramic coated separators is analyzed to understand their heat transfer behavior. The thermal conductivity of the separator is improved by ~3.2 times with the Al 2 O 3 coating.

25 ENERGY STORAGE↗
DOE OSTI2022

Dynamic fracture of glass fiber-reinforced ductile polymer matrix composites and loading rate effect

Here, the dynamic fracture of S-2 glass fiber-reinforced polymer matrix composites (FRPMCs) was investigated in this study. The matrix ductility was improved by a recently developed network topology modification technique via mixing partially reacted substructures (mPRS). The composite material was manufactured and characterized by micro-CT scanning and scanning electron microscopy (SEM). Dynamic single-edge notched bending (d-SENB) experiments were performed on the composites by using a modified split-Hopkinson pressure bar. Each specimen’s fracture process was visualized by ultrafast X-ray imaging. Such in-situ radiography enabled identifying the damage initiation below 50-micron scale and inspecting its propagation through the internal structures of opaque composites, thereby accurately quantifying the composites’ mechanical properties. Furthermore, the identical d-SENB experiments were designed and the digital image correlation (DIC) was employed to monitor the stress wave propagation on the composite specimens. The force and deflection measurements were modified and correlated to the physical damage processes. Besides, quasi-static SENB experiments were conducted to identify the loading rate effects on the composites’ fracture behaviors. The force and deflection history, bending stiffness, energy dissipation, and fracture toughness at different loading rates were quantified and compared. Finally, post-fracture analysis by micro-CT scanning and SEM provided physical observations on the variation of the fracture morphology by different loading rates.

42 ENGINEERING↗
NASA NTRS2001

Safer Aviation Materials Tested

A series of thermally stable polymer samples were tested. These materials are called low heat release materials and are designed for aircraft interior decorative materials. The materials are designed to give off a minimum amount of noxious gases when heated, which increases the possibility that people can escape from a burning aircraft. New cabin materials have suitably low heat release so that fire does not spread, toxic chemicals are not given off, and the fire-emergency escape time for crew and passengers is lengthened. These low heat-release materials have a variety of advantages and applications: interiors for ground-based facilities, interiors of space vehicles, and many commercial fire-protection environments. A microscale combustion calorimeter at the Federal Aviation Administration's (FAA) Technical Center tested NASA Langley Research Center materials samples. The calorimeter is shown. A sharp, quantitative, and reproducible heat-release-rate peak is obtained in the microscale heat-release-rate test. The newly tested NASA materials significantly reduced the heat release capacity and total heat release. The thermal stability and flammability behavior of the samples was very good. The new materials demonstrated a factor of 4 reduction in total heat release over ULTEM (a currently used material). This information is provided in the following barchart. In other tests, the materials showed greater than a factor 9 reduction in heat-release capacity over ULTEM. The newly tested materials were developed for low dielectric constant, low color, and good solubility. A scale up of the material samples is needed to determine the repeatability of the performance in larger samples. Larger panels composed of the best candidate materials will be tested in a larger scale FAA Technical Center fire facility. The NASA Glenn Research Center, Langley (Jeff Hinkley), and the FAA Technical Center (Richard Lyon) cooperatively tested these materials for the Accident Mitigation aspects of Fire Prevention under NASA's Aviation Safety Program.

Palaszewski, Bryan A.↗
DOE OSTI2026

Bioproduction, bioprotection, and biocontainment in multi-kingdom microbial systems with 3D spatial control

Engineered living materials (ELMs) are a class of hybrid materials that include engineered microbes encapsulated by a polymer matrix. The biotic and abiotic components define the ELMs design space and can be altered to improve performance and function. While current synthetic materials in the field display robust biocompatibility with both native and engineered living systems, we have a limited understanding of how to leverage three-dimensional (3D) form factors to spatially organize and control microbial dynamics within the material. Motivated by this knowledge gap, we employed extrusion-based 3D printing to fabricate multi-kingdom hydrogel constructs for the encapsulation of both single and multi-kingdom microbial systems. Core–shell cubic constructs enabled the spatial organization of a constitutive multi-kingdom system of levodopa (L-DOPA)-producing E. coli and betaxanthins (BXN)-producing S. cerevisiae. This spatial organization in 3D materials can introduce precise control over bioproduction, bioprotection, and biocontainment features that are critical to the efficacy of current ELMs. The relative spatial organization of the organisms, as well as the surface area-to-volume ratio were investigated to determine how these design elements impact microbial behavior (metabolite production, growth, expression, and cell distribution) over time. We demonstrated that F127-bis-urethane methacrylate (F127-BUM) core–shell geometries enable the hierarchical 3D printing of multi-kingdom constructs, offering customizable control over bioproduction, bioprotection, and biocontainment. With the optimization of these core–shell structures for continuous bioproduction, these ELMs could be deployed as compact and sustainable bioreactors in remote environments.

additive manufacturing↗
NASA NTRS2000

GENOA-PFA: Progressive Fracture in Composites Simulated Computationally

GENOA-PFA is a commercial version of the Composite Durability Structural Analysis (CODSTRAN) computer program that simulates the progression of damage ultimately leading to fracture in polymer-matrix-composite (PMC) material structures under various loading and environmental conditions. GENOA-PFA offers several capabilities not available in other programs developed for this purpose, making it preferable for use in analyzing the durability and damage tolerance of complex PMC structures in which the fiber reinforcements occur in two- and three-dimensional weaves and braids. GENOA-PFA implements a progressive-fracture methodology based on the idea that a structure fails when flaws that may initially be small (even microscopic) grow and/or coalesce to a critical dimension where the structure no longer has an adequate safety margin to avoid catastrophic global fracture. Damage is considered to progress through five stages: (1) initiation, (2) growth, (3) accumulation (coalescence of propagating flaws), (4) stable propagation (up to the critical dimension), and (5) unstable or very rapid propagation (beyond the critical dimension) to catastrophic failure. The computational simulation of progressive failure involves formal procedures for identifying the five different stages of damage and for relating the amount of damage at each stage to the overall behavior of the deteriorating structure. In GENOA-PFA, mathematical modeling of the composite physical behavior involves an integration of simulations at multiple, hierarchical scales ranging from the macroscopic (lamina, laminate, and structure) to the microscopic (fiber, matrix, and fiber/matrix interface), as shown in the figure. The code includes algorithms to simulate the progression of damage from various source defects, including (1) through-the-thickness cracks and (2) voids with edge, pocket, internal, or mixed-mode delaminations.

Murthy, Pappu L. N.↗
NASA NTRS2011

Effect of Data Reduction and Fiber-Bridging on Mode I Delamination Characterization of Unidirectional Composites

Reliable delamination characterization data for laminated composites are needed for input in analytical models of structures to predict delamination onset and growth. The double-cantilevered beam (DCB) specimen is used to measure fracture toughness, GIc, and strain energy release rate, GImax, for delamination onset and growth in laminated composites under mode I loading. The current study was conducted as part of an ASTM Round Robin activity to evaluate a proposed testing standard for Mode I fatigue delamination propagation. Static and fatigue tests were conducted on specimens of IM7/977-3 and G40-800/5276-1 graphite/epoxies, and S2/5216 glass/epoxy DCB specimens to evaluate the draft standard "Standard Test Method for Mode I Fatigue Delamination Propagation of Unidirectional Fiber-Reinforced Polymer Matrix Composites." Static results were used to generate a delamination resistance curve, GIR, for each material, which was used to determine the effects of fiber-bridging on the delamination growth data. All three materials were tested in fatigue at a cyclic GImax level equal to 90% of the fracture toughness, GIc, to determine the delamination growth rate. Two different data reduction methods, a 2-point and a 7-point fit, were used and the resulting Paris Law equations were compared. Growth rate results were normalized by the delamination resistance curve for each material and compared to the nonnormalized results. Paris Law exponents were found to decrease by 5.4% to 46.2% due to normalizing the growth data. Additional specimens of the IM7/977-3 material were tested at 3 lower cyclic GImax levels to compare the effect of loading level on delamination growth rates. The IM7/977-3 tests were also used to determine the delamination threshold curve for that material. The results show that tests at a range of loading levels are necessary to describe the complete delamination behavior of this material.

Murri, Gretchen B.↗