Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Periodicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Calculation of the dynamic first electronic hyperpolarizability β(−ω{sub σ}; ω{sub 1}, ω{sub 2}) of periodic systems. Theory, validation, and application to multi-layer MoS{sub 2}

We describe our implementation of a fully analytical scheme, based on the 2n + 1 rule, for computing the coupled perturbed Hartree Fock and Kohn-Sham dynamic first hyperpolarizability tensor β(−ω{sub σ}; ω{sub 1}, ω{sub 2}) of periodic 1D (polymer), 2D (slab), and 3D (crystal) systems in the CRYSTAL code [R. Dovesi et al., Int. J. Quantum Chem. 114, 1287 (2014)], which utilizes local Gaussian type basis sets. The dc-Pockels (dc-P) and second harmonic generation (SHG) tensors are included as special cases. It is verified that (i) symmetry requirements are satisfied; (ii) using LiF as an example, the infinite periodic polymer result agrees with extrapolated finite oligomer calculations and, likewise, for the build-up to a 2D slab and a 3D crystal; (iii) the values converge to the static case for low frequencies; and (iv) the Bishop-deKee dispersion formulas relating dc-P, SHG, and general processes are reproduced through quartic terms. Preliminary SHG calculations on multi-layer MoS{sub 2} satisfactorily reproduce experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microwave-induced zero-resistance state in two-dimensional electron systems with unidirectional periodic modulation

In this study we fabricated lateral superlattices (LSLs) based on the selectively doped GaAs/AlAs heterostructures with a high-mobility two-dimensional (2D) electron gas. The LSLs were formed using the electron-beam lithography and lift-off techniques, which produced a set of metallic strips on top of a heterojunction. The amplitude of the 2D electron gas modulation in the LSL was controlled by the gate voltage applied to the metallic strips. The LSLs with two different periods (a = 200 nm and 500 nm) were used to investigate the influence of microwave radiation with the frequency of 110–150 GHz on the 2D electron transport at the temperature T = 1.6 K in the magnetic field B < 1 T. We have found that zero-resistance states (ZRSs) appear under the microwave radiation in the 2D systems with a unidirectional periodic modulation. These ZRSs are located at the minima of commensurability oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-assembly of colloidal bands driven by a periodic external field

We study the formation of bands of colloidal particles driven by periodic external fields. Using Brownian dynamics, we determine the dependence of the band width on the strength of the particle interactions and on the intensity and periodicity of the field. We also investigate the switching (field-on) dynamics and the relaxation times as a function of the system parameters. The observed scaling relations were analyzed using a simple dynamic density-functional theory of fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly periodic laser-induced nanostructures on thin Ti and Cu foils for potential application in laser ion acceleration

The feasibility of femtosecond laser-induced periodic nanostructures on thin Ti and Cu foils (thickness down to 1 μm) is demonstrated. At pulse durations of 120 fs and a wavelength of 400 nm, periods of 61 nm to 320 nm were obtained. Particle-in-cell simulations of laser ion acceleration processes with such nanostructured targets indicate their potential for high energy particle physics applications. In particular, a measurable enhancement of the proton cut-off energy and a significant enhancement of the number of accelerated particles compared to non- or weakly structured targets of same thickness and material are expected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Periodic domain inversion in x-cut single-crystal lithium niobate thin film

We report the fabrication of periodically poled domain patterns in x-cut lithium niobate thin-film. Here, thin films on insulator have drawn particular attention due to their intrinsic waveguiding properties offering high mode confinement and smaller devices compared to in-diffused waveguides in bulk material. In contrast to z-cut thin film lithium niobate, the x-cut geometry does not require back electrodes for poling. Further, the x-cut geometry grants direct access to the largest nonlinear and electro-optical tensor element, which overall promises smaller devices. The domain inversion was realized via electric field poling utilizing deposited aluminum top electrodes on a stack of LN thin film/SiO{sub 2} layer/Bulk LN, which were patterned by optical lithography. The periodic domain inversion was verified by non-invasive confocal second harmonic microscopy. Our results show domain patterns in accordance to the electrode mask layout. The second harmonic signatures can be interpreted in terms of spatially, overlapping domain filaments which start their growth on the +z side.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Periodic surface structure bifurcation induced by ultrafast laser generated point defect diffusion in GaAs

The formation of high spatial frequency laser induced periodic surface structures (HSFL) with period <0.3 λ in GaAs after irradiation with femtosecond laser pulses in air is studied. We have identified a point defect generation mechanism that operates in a specific range of fluences in semiconductors between the band-gap closure and ultrafast-melt thresholds that produces vacancy/interstitial pairs. Stress relaxation, via diffusing defects, forms the 350–400 nm tall and ∼90 nm wide structures through a bifurcation process of lower spatial frequency surface structures. The resulting HSFL are predominately epitaxial single crystals and retain the original GaAs stoichiometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of edge conditions on material ejection from periodic grooves in laser shock-loaded tin

In a material subjected to high dynamic compression, the breakout of a shock wave at a rough free surface can lead to the ejection of high velocity debris. Anticipating the ballistic properties of such debris is a key safety issue in many applications involving shock loading, including pyrotechnics and inertial confinement fusion experiments. In this paper, we use laser driven shocks to investigate particle ejection from calibrated grooves of micrometric dimensions and approximately sinusoidal profile in tin samples, with various boundary conditions at the groove edges, including single groove and periodic patterns. Fast transverse shadowgraphy provides ejection velocities after shock breakout. They are found to depend not only on the groove depth and wavelength, as predicted theoretically and already observed in the past, but also, unexpectedly, on the edge conditions, with a jet tip velocity significantly lower in the case of a single groove than behind a periodic pattern.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication and structural properties of AlN submicron periodic lateral polar structures and waveguides for UV-C applications

Periodically poled AlN thin films with submicron domain widths were fabricated for nonlinear applications in the UV-VIS region. A procedure utilizing metalorganic chemical vapor deposition growth of AlN in combination with laser interference lithography was developed for making a nanoscale lateral polarity structure (LPS) with domain size down to 600 nm. The Al-polar and N-polar domains were identified by wet etching the periodic LPS in a potassium hydroxide solution and subsequent scanning electron microscopy (SEM) characterization. Fully coalesced and well-defined vertical interfaces between the adjacent domains were established by cross-sectional SEM. AlN LPSs were mechanically polished and surface roughness with a root mean square value of ∼10 nm over a 90 μm × 90 μm area was achieved. 3.8 μm wide and 650 nm thick AlN LPS waveguides were fabricated. The achieved domain sizes, surface roughness, and waveguides are suitable for second harmonic generation in the UVC spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of periodic interfacial misfit dislocation array at the InSb/GaAs interface via surface anion exchange

The relationship between growth temperature and the formation of periodic interfacial misfit (IMF) dislocations via the anion exchange process in InSb/GaAs heteroepitaxy was systematically investigated. The microstructural and electrical properties of the epitaxial layer were characterized using atomic force microscope, high-resolution x-ray diffraction, transmission electron microscopy, and Hall resistance measurement. The formation of interfacial misfit (IMF) dislocation arrays depended on growth temperature. A uniformly distributed IMF array was found in a sample grown at 310 °C, which also exhibited the lowest threading dislocation density. The analysis suggested that an incomplete As-for-Sb anion exchange process impeded the formation of IMF on sample grown above 310 °C. At growth temperature below 310 °C, island coalescence led to the formation of 60° dislocations and the disruption of periodic IMF array. All samples showed higher electron mobility at 300 K than at 77 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sub-quarter micrometer periodically poled Al 0.68 Sc 0.32 N for ultra-wideband photonics and acoustic devices

In this study, we demonstrate the ability of polarity inversion of sputtered aluminum scandium nitride thin films through post-fabrication processes with domain widths as small as 220 nm at a periodicity of 440 nm. An approach using photo- and electron-beam lithography to generate sub-quarter micrometer feature size with adjustable duty cycle through a lift-off process is presented. Here, the film with a coercive field $E_c^+$ of 5.35 MV/cm was exercised first with a 1 kHz triangular double bipolar wave and ultimately poled with a 0.5 kHz double monopolar wave using a Radiant Precision Premier II tester. The metal polar (M-polar) and nitrogen polar (N-polar) domains were identified and characterized through potassium hydroxide wet etching as well as piezoresponse force microscopy (PFM). Well-distinguished boundaries between the oppositely polarized domain regions were confirmed through the phase diagram of the PFM results. The relationship between the electrode width, poling voltage, and domain growth was experimentally studied and statistically analyzed, where 7.96 nm/V domain width broadening vs escalating poling voltage was observed. This method produces extremely high domain spatial resolution in III-nitride materials via poling and is transferable to a CMOS-compatible photolithography process. The spatial resolution of the periodically poled Al 0.68 Sc 0.32 N is suitable for second-harmonic generation of deep ultraviolet through quasi-phase-matching and RF MEMS operating in the X-Band spectrum.

36 MATERIALS SCIENCE↗

Sub-20 nm island self-organisation stimulated by spatially periodic laser exposure in the GaAs/InGaAs/GaAs epitaxial system

Four-beam laser interference is shown to stimulate the self-organisation of periodic two-dimensional arrays of nanoislands on the surface of GaAs/InGaAs/GaAs epitaxial structures. (Self-organisation is here taken to mean processes that determine the island size.) The island size distribution has two well-defined maxima. The smaller islands ({approx}5 nm) form inside each heat-affected zone, and the larger islands ({approx}15 nm), at the periphery of such zones. The island width is a factor of 20 - 60 smaller than the standing wave period, which can be accounted for in terms of the elastic stress on the surface of the epitaxial film. (nanostructures)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CW laser-induced generation of periodic ring structures on thin PbSe films

Laser processing of epitaxial PbSe films has been found to produce periodic concentric surface ring structures that extend over several laser spot radii from the exposed zone. The proposed theoretical interpretation of this effect in terms of defect - deformation interactions adequately describes the observed morphology, periodicity and complex (multimode) shape of the ring structures. (interaction of laser radiation with matter)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of quasi-periodic nano- and microstructures on silicon surface under IR and UV femtosecond laser pulses

Quasi-periodic nano- and microstructures have been formed on silicon surface using IR ( {lambda} Almost-Equal-To 744 nm) and UV ( {lambda} Almost-Equal-To 248 nm) femtosecond laser pulses. The influence of the incident energy density and the number of pulses on the structured surface topology has been investigated. The silicon nanostructurisation thresholds have been determined for the above-mentioned wavelengths. Modulation of the surface relief at the doubled spatial frequency is revealed and explained qualitatively. The periods of the nanostructures formed on the silicon surface under IR and UV femtosecond laser pulses are comparatively analysed and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control of the repetition rate and reduction of the jitter of the pulses of passively Q-switched solid-state miniature lasers using periodic diode-pump modulation

Based on an extended point laser model, the lasing of passively Q-switched Nd : YAG minilasers has been numerically analysed. We have shown that periodically modulated diode pump may be used to control the pulse repetition rate and substantially reduce the timing pulse jitter. When the pump is modulated with rectangular pulses, switching from a high pump level to a low one upon generation of a successive laser pulse improves the stability of the pulse repetition rate relative to variations of the average pump level and broadens the range of repetition frequencies whereby they may be locked to the pulse modulation frequency. The feasibility of lowering the timing jitter and locking the pulse repetition frequency to the pump modulation frequency has been confirmed experimentally. For repetition rates {approx}1 kHz, the relative standard deviation of the pulse-repetition period is reduced from several percent for a continuous pumping to 0.06 % by applying ''truncation'' of modulation pulses. The experimental results agree well with simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synchronisation and desynchronisation of self-modulation oscillations in a ring chip laser under the action of a periodic signal and noise

The effect of pump noise on the synchronisation of selfmodulation oscillations in a solid-state ring laser with periodic pump modulation is studied numerically and experimentally. It is found that, in contrast to desynchronisation that usually occurs under action of noise in the case of 1/1 synchronisation of self-oscillations by a periodic signal, the effect of noise on 1/2 synchronisation may be positive, namely, at a sufficiently low intensity, pump noise is favourable for synchronisation of self-oscillations, for narrowing of their spectrum, and for increasing the signal-to-noise ratio. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Parametric generation of broadband biphotons in a periodic sequence of thin crystals

Collinear parametric scattering of light under type-II phase matching is considered in a periodic sequence of nonlinear cells made of BBO crystals. The possibilities of reducing the duration of the wave packets of biphotons and increasing their intensity under monochromatic pumping are studied. The analysis is based on the account of dispersion of the refractive indices using Sellmeier equations. The obtained results allow one to conclude that at an appropriate choice of the crystal thicknesses and the number of cells, it is possible to significantly increase the flux of broadband biphotons and obtain extremely short quantum packets. It is shown that for sufficiently small thicknesses of individual crystals (layers), this system exhibits a fine structure in the spectrum of biphotons: with an increase in the number of cells (layers) the broadband spectrum is divided into a number of narrow bands and the number of these bands increases. When use is made of a nonlinear BBO crystal, this method allows one to obtain ultrashort packets of biphotons with duration τ{sub 0} ≈ 2 fs. Compared with a different method of generation of broadband biphotons, which is based on the use of quasi-phase-matched periodically poled crystals, the method studied in this paper does not necessitate the need for the phase modulation of a biphoton to be converted into the amplitude modulation. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling the interaction between optical solitons using periodic dispersion variations in an optical fibre

This paper considers interaction between two fundamental optical solitons in an optical fibre with a periodically varying dispersion. Numerical simulation results indicate that, by properly adjusting the modulation period, one can change the type of interaction between solitons. We consider three particular cases: the fission of a soliton pair into two separate pulses, the generation of an intense pulse as a result of the fusion of two solitons and the formation of a coupled state of two solitons (soliton molecule). The present findings demonstrate the possibility of controlling the number and group velocity of solitons using passive single-mode optical fibres. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of the second harmonic in ridge waveguides formed in periodically poled lithium niobate

Generation of the second harmonic of semiconductor laser radiation in the IR range (980 – 1140 nm) in ridge waveguides with a large refractive index step, formed in periodically poled nonlinear LiNbO{sub 3} crystals, is demonstrated. Ridge waveguides have been prepared by precise cutting using a diamond microsaw. Spectral dependences of the SHG power and intensity distributions in the near field of second harmonic and pump radiations have been measured. The results obtained indicate good prospects of designing tunable laser radiation sources in the visible range due to the SHG in ridge waveguides formed in periodically poled nonlinear crystals under semiconductor laser pumping. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗