Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear Engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Analcime-wairakite formation during experimental cement-bentonite alteration at 200–300 °C

Engineered barrier system materials in nuclear waste repositories may undergo hydrothermal alteration in response to groundwater saturation and heating events over their long operational timescales. Hydrothermal interactions between engineered materials (e.g., bentonite buffers, cements, waste canister materials) and the host rock environment may drive alteration processes that affect the advantageous properties of some barrier materials. However, such alteration will also promote the formation of zeolites, hydrothermally formed minerals that may themselves act to isolate radionuclides. Understanding the environmental conditions that control radionuclide-sorbing properties of zeolites, such as Si/Al ratio or Na content, will be valuable for assessing the changing properties of engineered barrier materials in the case of an in situ heating event. Here, we present experimental work characterizing the formation of zeolites during hydrothermal interactions between generic clay and cement barrier materials, with a focus on the analcime-wairakite zeolite series, which has known radionuclide sorption and exchange properties. We present the results of hydrothermal experiments combining uncured ordinary Portland cement powder with steel and Wyoming bentonite in the presence of Opalinus clay and a synthesized Opalinus clay groundwater to simulate water-saturated conditions in an argillaceous rock repository. The experiments were conducted isothermally at 200 or 300 °C for 8 to 24 weeks. In contrast to analogous studies that did not include cement reactants, we observed the formation of analcime-group minerals in all experiments. The addition of cement resulted in lower Si/Al ratios in the zeolites compared to similar studies that did not include cement. The presence of cement as a reactant was interpreted to promote analcime formation at 200 °C. At 300 °C, we observed higher calcium and silica concentrations in the aqueous solutions as well as increased wairakite formation and decreased analcime formation compared to the experiments at 200 °C. These results show a fully realized analcime-wairakite solid solution that falls between Si/Al = 2 (ideal) and a trend of analcime minerals that have increasing Si/Al ratios with increasing Na/(Na+Ca). Our results show predictable relationships between the Si/Al ratio and the analcime-wairakite content under hydrothermal conditions and illustrate that repository material interactions may promote the formation of zeolites in the analcime-wairakite solid-solution series during heating events in the subsurface.

58 GEOSCIENCES↗
NASA NTRS2002

An End-To-End Test of A Simulated Nuclear Electric Propulsion System

The Safe Affordable Fission Engine (SAFE) test series addresses Phase I Space Fission Systems issues in it particular non-nuclear testing and system integration issues leading to the testing and non-nuclear demonstration of a 400-kW fully integrated flight unit. The first part of the SAFE 30 test series demonstrated operation of the simulated nuclear core and heat pipe system. Experimental data acquired in a number of different test scenarios will validate existing computational models, demonstrated system flexibility (fast start-ups, multiple start-ups/shut downs), simulate predictable failure modes and operating environments. The objective of the second part is to demonstrate an integrated propulsion system consisting of a core, conversion system and a thruster where the system converts thermal heat into jet power. This end-to-end system demonstration sets a precedent for ground testing of nuclear electric propulsion systems. The paper describes the SAFE 30 end-to-end system demonstration and its subsystems.

VanDyke, Melissa↗
NASA NTRS1972

NERVA 400E thrust train dynamic analysis

The natural frequencies and dynamic responses of the NERVA 400E engine thrust train were determined for nuclear space operations (NSO), and earth-orbital shuttle (EOS) during launch and boost conditions. For NSO, a mini-tank configuration was analyzed with the forward end of the upper truss assumed fixed at the stage/mini-tank interface. For EOS, both a mini-tank and an engine only configuration were analyzed for a specific engine assembly support (EAS) stiffness. For all cases the effect of the shield on dynamic response characteristics was determined by performing parallel analyses with and without the shield. Gimbaling loads were not generated as that effort was scheduled after the termination date. The analysis, while demonstrating the adequacy of the engine design, revealed serious deficiencies in the EAS. Responses at the unsupported ends of the engine are excessive. Responses at the nuclear subsystem interface appear acceptable. It is recommended that additional analysis and design effort be expended upon the EAS to ensure that all engine responses stay within reasonable bounds.

Vronay, D. F.↗
NASA NTRS2023

Parametric Modeling of NTP Engine Performance for a Crewed Mars Mission

Nuclear thermal propulsion (NTP) has been studied extensively for use on a crewed mission to Mars, and NASA and DARPA are partnering in the development and demonstration of an NTP engine as part of the DRACO project. The specific impulse and thrust achieved by an engine in the context of a mission determines the propellant amount required to close the mission and the size of the vehicle required. An NTP engine has a slower start-up/shut-down transient than traditional chemical engines and requires post-firing cooling, and thus the average Isp for a burn is a function of the power ramp-up rate and the duration of the burn. An initial demonstration engine may target a lower Isp than the 900 sec that has been extensively studied by NASA. This paper shows the effect on the mission closure and vehicle sizing of the transient ramp rate performance and of lower than 900 sec specific impulse. Ammonia is considered as an alternate NTP propellant, with mission performance estimated.

NTP↗
DOE OSTI2023

Thermal Analysis of the SIRIUS3 Nuclear Propulsion Fuel Calibration Experiment

NASA is considering Nuclear Thermal Propulsion (NTP) for long range extraterrestrial missions; these engines eject hot hydrogen gas heated by a nuclear reactor for rocket thrust. To economize the use of hydrogen to the greatest extent possible, the NTP engines will be expected to, in a very short time (i.e., on the order of a minute or less), go from warm$(\sim 300 K)$ zero power conditions to full operational power, with a coolant outlet temperature on the order of 2700–3000 K \cite{en15176181}. These conditions will introduce significant thermomechanical stresses on the NTP fuel. The objective of the SIRIUS series of experiments is to examine the performance of candidate NTP fuel materials when subjected to temperature ramp rates that are prototypical of NTP system startup and operation. The SIRIUS experiments are a series of experiments that will be irradiated in the TREAT reactor and are subjected to power ramps and cycles that are prototypical for NTP operation. The experiments will be accomplished by executing a series of shaped transients on the SIRIUS specimens while collecting in situ specimen temperature data. These tests will determine whether operational startup ramps and peak temperatures will result in detrimental fuel performance phenomena (i.e. fuel deformation, fragmentation and cracking) To this end, INL has been evaluating a number of SIRIUS experiments, and these evaluations include thermal analysis of the SIRIUS experiments. Thermal analysis were performed for the calibration irradiation of the SIRIUS-3 experiment, and the focus of this memo is to document the results from the calibration irradiation thermal analysis. The thermal analysis reveals that radiation heat emission of the outer fuel elements and conduction to different metal components such as the molybdenum element tubes remove significant quantities of heat from the fuel element specimen, and future experiment designs need to consider these heat transfer mechanics. This paper begins with a brief experiment overview with a discussion of the fuel sample and experiment configuration. The experiment and model description section is followed by a set of results with a brief discussion, and finally the memo concludes with suggestion for future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Evidence of Coherent Elastic Neutrino-Nucleus Scattering with COHERENT’s Germanium Array

We report the first detection of coherent elastic neutrino-nucleus scattering (CEvNS) on natural germanium, measured at the Spallation Neutron Source at Oak Ridge National Laboratory. The Ge-Mini detector of the COHERENT collaboration employs large-mass, low-noise, high-purity germanium spectrometers, enabling excellent energy resolution, and an analysis threshold of 1.5 keV electron-equivalent ionization energy. We observe an on-beam excess of 20.6$^{+7.1}_{−6.3}$ counts with a total exposure of 10.22 GWhkg, and we reject the no-CEvNS hypothesis with 3.9⁢𝜎 significance. The result agrees with the predicted standard model of particle physics signal rate within 2⁢𝜎.

Electroweak interaction↗
DOE OSTI2021

Observation of Hydrodynamic Flows in Imploding Fusion Plasmas on the National Ignition Facility [plus supplemental information]

Inertial confinement fusion implosions designed to have minimal fluid motion at peak compression often show significant linear flows in the laboratory, attributable per simulations to percent-level imbalances in the laser drive illumination symmetry. In this work, we present experimental results which intentionally varied the mode 1 drive imbalance by up to 4% to test hydrodynamic predictions of flows and the resultant imploded core asymmetries and performance, as measured by a combination of DT neutron spectroscopy and high-resolution x-ray core imaging. Neutron yields decrease by up to 50%, and anisotropic neutron Doppler broadening increases by 20%, in agreement with simulations. Furthermore, a tracer jet from the capsule fill-tube perturbation that is entrained by the hot-spot flow confirms the average flow speeds deduced from neutron spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Report on Field Test at INL Cask Farm of Single Detector Fast Neutron Spent Fuel Cask Verification System

Detecting diversion of spent fuel elements in dry storage casks is challenging due to the thick shielding used in cask construction. Measurements on top of the cask to map the underlying arrangement of the fuel elements and looking for anomalous changes over time has proven difficult to achieve using gamma rays due to the high scattering and attenuation from the thick steel structure, weakening information on the present or absence of fuel bundles. Simulations and laboratory experiments suggest that the high-energy neutron flux (>200 keV) measured directly above each fuel bundle is sufficient to produce a position map that enables detection of the present or absence of fuel bundles, and therefore diversion of a spent fuel bundle. A single-detector spent-fuel monitoring technique based on this principle was development at the Lawrence Livermore National Laboratory (LLNL). The INL Cask Farm in the INTEC technical area at Idaho National Laboratory (INL) offers the capability to test this technique on an MC-10 storage cask which has a distribution of full and empty fuel positions. An experimental test plan for the single-detector verification system was developed in consultation with INL personnel to be completed in FY2021. Due to travel advisories related to COVID-19, the experimental test plan was adapted to enable INL personnel to carry out the measurements in consultation with LLNL personnel following shipment of the LLNL system to INL. Field test measurements of the single detector verification system were successfully carried out at the INL cask farm on September 7-9, 2021. This document summarizes results of the field test.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Enhanced Component Performance Study: Turbine-Driven Pumps 1998-2024

This report presents an enhanced performance evaluation of turbine driven pumps (TDPs) at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from calendar year 1998 through 2024 as reported in the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS). The TDP failure modes considered for standby systems are fail to start (FTS), fail to run (FTR) for one hour of operation (FTR=1H), FTR after one hour of operation (FTR>1H), and for normally running systems FTS and FTR. An eight hour unreliability estimate is also calculated and trended. The component reliability estimates and the reliability data are trended for the most recent 10 year period while yearly estimates for reliability are provided for the entire study period. No increasing trends were identified for TDPs for the most recent 10 year period.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

System Study: Auxiliary Feedwater 1998-2024

This report presents an unreliability evaluation of the auxiliary feedwater (AFW) system at 62 U.S. commercial operating nuclear reactors. New Standardized Plant Analysis Risk (SPAR) models with the most recent SPAR parameter update results were used in this report. Demand, run hour, and failure data from calendar years 1998 to 2024 for selected components were obtained from the Institute of Nuclear Power Operations Industry Reporting and Information System. The unreliability results are trended for the most recent 10 year period and yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the industry-wide estimates of AFW system start-only unreliability, but a statistically significant decreasing trend was identified in the industry-wide estimates of AFW system 24-hour mission unreliability.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Feasibility of an Active Interrogation System to Classify Waste with He-4 Neutron Spectroscopy

This work investigates a 4 He-detector active interrogation system that leverages neutron spectroscopy to classify nuclear waste streams. MCNP models tested the concept through the simulation of a D-D neutron generator, an array of 4 He detectors, and various waste compositions. The fast-neutron Differential Die-Away signature was augmented with a neutron-energy discrimination signature. This signature isolates induced fission neutrons, the energy of which is greater than that of the D-D monoenergetic spectrum. With the incorporation of this spectroscopic technique, the measurement time decreased by 3–9% (depending on the degree of neutron moderation and absorption presented by the sample), demonstrating how neutron spectroscopy can enhance active interrogation methods. The reduced measurement times would have significant financial and logistical benefits for facilities with large footprints of low-level waste production.

4He detectors↗
DOE OSTI2021

Nuclear Data and Cross Section Testing Using ENDF/B-VIII.0

With the release of the Evaluated Nuclear Data File (ENDF)/B-VIII.0 library, nuclear criticality safety practitioners and engineers have access to the latest cross section sets available for their analyses. However, these cross sections must be rigorously tested and validated to ensure that the nuclear data are responsive to the needs of the individuals responsible for developing, implementing, and maintaining computational tools for criticality safety applications. Thus, the ENDF/B-VIII.0 library is tested and validated with a large collection of experiments that were vetted by the International Criticality Safety Benchmark Evaluation Project and made available in the International Handbook of Evaluated Criticality Safety Benchmark Experiments. A selection of benchmark experiments for use within the criticality safety community were prepared and reviewed within the Verified, Archived Library of Inputs and Data (VALID), which is maintained by the Nuclear Energy and Fuel Cycle Division at Oak Ridge National Laboratory. The performance of the ENDF/B-VIII.0 library is assessed by using VALID models of benchmark experiments with the beta 12 version of SCALE 6.3 KENO V.a and KENO-VI Monte Carlo codes. The performance is compared with the results obtained from with the ENDF/B-VII.1 library. This report considers multigroup (MG) and continuous energy (CE) formats of the ENDF/B-VIII.0 and -VII.1 libraries. The benchmark experiments within VALID that validate the ENDF/B-VIII.0 library cover 15 broad system categories by using a range of fissile materials, uranium enrichments, plutonium isotopic vectors, and mixed uranium/plutonium systems. These forms are represented as metals, solutions, or various arrays of rods or plates that cover a variety of neutron energy spectra: thermal, fast, mixed, and intermediate. Over 600 cases were considered for use with the KENO V.a and KENO-VI codes with the ENDF/B-VIII.0 library. The results of the Monte Carlo comparison of ENDF/B-VIII.0 to ENDF/B-VII.1 with both KENO V.a and KENO-VI indicate that there is a less than 0.53% Δk difference between the bias of calculated k eff from the expected values. The CE ENDF/B-VIII.0 library results in smaller magnitude biases than the ENDF/B-VII.1 data for HEU-MET-FAST, HEU-SOL-THERM, IEU-MET-FAST, LEU-SOL-THERM, PU-SOL-THERM, and U233-MET-FAST systems, while the MG results yielded smaller magnitude biases for HEU-MET-FAST, HEU-SOL-THERM, IEU-MET-FAST, LEU-COMP-THERM, LEU-SOL THERM, MIX-COMP-FAST, and U233-MET-FAST systems. Most notable are the adjustments to the plutonium and 233 U cross section data, which has resulted in noticeably lower biases in the ENDF/B VIII.0 results for the mixed, plutonium, and 233 U systems. Results of the sensitivity data file comparison generated from TSUNAMI-3D for selected VALID cases for the ENDF/B-VIII.0 library indicate a very high level of agreement with correlation coefficients of the effect of nuclear data uncertainty on k eff (the c k integral parameter) all above 0.99. This indicates that cases with the ENDF/B-VIII.0 library would see very similar responses to any nuclear data errors or change as those with the ENDF/B-VII.1 library.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRSDate not supplied

Nuclear Thermal Propulsion Material Trade for Additively Manufactured Regenerative Chambers

Nuclear thermal propulsion (NTP) is a game changing technology with advantages over chemical propulsion systems for deep space missions but comes with many engineering challenges. This paper focuses on the challenge of material selection for a regeneratively-cooled chamber for use in a nuclear environment with minimal design margins. Chemical compatibility with reactants and products following energy extraction (be it through combustion or neutron bombardment) must be considered. Similarly, mechanical and thermophysical properties (e.g., density, thermal conductivity, yield strength, etc.) as functions of temperature are critical. While hydrogen embrittlement environment (HEE) is a risk and consideration for traditional chemical combustion chambers, application in a nuclear thermal engine adds additional material compatibility and resilience requirements to long-term nuclear radiation exposure. Chamber materials in this trade included, but were not limited to, A-286, Haynes 230, Haynes 282, CRES 347, GRCop-42, GRCop-84, Inconel 625, JBK-75, and NASA HR-1. The material trade focuses on modern additive manufacturing techniques and hypothetical geometric constraints.

Nuclear Thermal Propulsion↗
NASA NTRSDate not supplied

Nuclear Thermal Propulsion Material Trade for Additively Manufactured Regenerative Chambers

Nuclear thermal propulsion (NTP) is a game changing technology with advantages over chemical propulsion systems for deep space missions but comes with many engineering challenges. This paper focuses on the challenge of material selection for a regeneratively-cooled chamber for use in a nuclear environment with minimal design margins. Chemical compatibility with reactants and products following energy extraction (be it through combustion or neutron bombardment) must be considered. Similarly, mechanical and thermophysical properties (e.g., density, thermal conductivity, yield strength, etc.) as functions of temperature are critical. While hydrogen embrittlement environment (HEE) is a risk and consideration for traditional chemical combustion chambers, application in a nuclear thermal engine adds additional material compatibility and resilience requirements to long-term nuclear radiation exposure. Chamber materials in this trade included, but were not limited to, A-286, Haynes 230, Haynes 282, CRES 347, GRCop-42, GRCop-84, Inconel 625, JBK-75, and NASA HR-1. The material trade focuses on modern additive manufacturing techniques and hypothetical geometric constraints.

Nuclear Thermal Propulsion↗
NASA NTRS1987

A critical evaluation of various methods for the analysis of flow-solid interaction in a nest of thin cylinders subjected to cross flows

Various experimental, analytical, and numerical analysis methods for flow-solid interaction of a nest of cylinders subjected to cross flows are reviewed. A nest of cylinders subjected to cross flows can be found in numerous engineering applications including the Space Shuttle Maine Engine-Main Injector Assembly (SSME-MIA) and nuclear reactor heat exchangers. Despite its extreme importance in engineering applications, understanding of the flow-solid interaction process is quite limited and design of the tube banks are mostly dependent on experiments and/or experimental correlation equations. For future development of major numerical analysis methods for the flow-solid interaction of a nest of cylinders subjected to cross flow, various turbulence models, nonlinear structural dynamics, and existing laminar flow-solid interaction analysis methods are included.

Kim, Sang-Wook↗