Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Ferroelectric properties of Pb(Mn{sub 1/3}Nb{sub 2/3})O{sub 3}-Pb(Zr,Ti)O{sub 3} thin films epitaxially grown on (001)MgO substrates

Ferroelectric ternary perovskite thin films of 0.06Pb(Mn{sub 1/3},Nb{sub 2/3})O{sub 3} (PMnN)-0.42PbZrO{sub 3} (PZ)-0.52PbTiO{sub 3} (PT)[0.06PMnN-0.94PZT(45/55)] have been grown on the (001)MgO substrates by radio frequency-magnetron sputtering with quenching processing. The deposition conditions, microstructures, piezoelectric, and ferroelectric properties of the ternary perovskite thin films are described in comparison with the binary compounds of PZ-PT (PZT). The out-plane x-ray diffraction (XRD) measurements for the ternary PMnN-PZT perovskite thin films of 1 to 1-3 {mu}m in film thickness show strong single (001) orientation. The in-plane {phi}-scan XRD curve verified the ternary thin films are single crystals of perovskite structure. Their lattice parameters are almost the same as bulk values and the ternary thin films are almost stress free. The PMnN-PZT thin films show high density without columnar structure. The PZT-based ternary perovskite thin films with the small addition of PMnN, i.e., 6 mole % PMnN, exhibit a strong hard ferroelectric response, i.e., P{sub s}=60 {mu}C/cm{sup 2} and 2E{sub c}=230 kV/cm. Their effective piezoelectric constants are typically e{sub 31,eff}=-7.7 C/m{sup 2}. These values are slightly higher than those of binary perovskite PZT thin 0011fil.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of substrate temperatures on amorphous carbon nitride films prepared by reactive sputtering

Amorphous carbon nitride, a-CN{sub x}, films were deposited by reactive radio frequency magnetron sputtering of a graphite target in nitrogen gas. This kind of films could be used as novel electric and optical devices. The authors investigated effects of the substrate temperature up to 873 K on the films in this study. The films were characterized with x-ray photoelectron spectroscopy (XPS), ellipsometry, atomic force microscopy, and nanoindentation tests. XPS studies show that the decreasing tendency in the composition ratio of carbon to nitrogen in a-CN{sub x} films with the substrate temperature is observed; however, the bonding fraction of sp{sup 3}C-N increases depending on the substrate temperature. The nanoindentation tests reveal that the film hardness increases from 2 to 12 GPa as the substrate temperature increases from room temperature to 823 K. These results suggest that the film hardness is closely related to the bonding states between carbon and nitrogen.

36 MATERIALS SCIENCE↗

Silicon carbonitrides: On the attainability of stable compounds with high nitrogen content

Thin stoichiometric Si-C-N thin films and layers along selected tie lines of the phase diagram have been synthesized from the elements by means of ion implantation of carbon and nitrogen ions into silicon wafer substrates as well as rf magnetron cosputtering of targets with different Si/C area ratios by using Ar/N{sub 2} sputter gas with successive variation of the N{sub 2} content. After synthesis, the samples were heat treated under high vacuum conditions utilizing an electron beam annealing system. Resonant nuclear reaction analysis, non-Rutherford backscattering spectrometry and Auger electron spectroscopy have been used to perform an elemental analysis of the films and layers, respectively. The chemical binding states were investigated with x-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative study of photocatalytic activity in CdS-TiO{sub 2} thin films prepared by two different techniques

In this study, CdS layer in CdS-TiO{sub 2} bilayer films was fabricated by two different chemical bath deposition techniques: one with an ammonium complex as complexing agent and the other with sodium citrate as a substitute for the ammonium complex. The TiO{sub 2} upper layer was deposited by dc magnetron sputtering technique for both the CdS underlayers. The effect of postdeposition vacuum annealing was studied for both samples. The photocatalytic activity was evaluated by measuring the decomposition of methanol in gas phase under ultraviolet-visible irradiation. The CdS thin films, prepared by both techniques, show a highly oriented hexagonal structure. The optical transmission edge of the CdS thin films deposited by the ammonia-free technique is in lower wavelength than that of the other technique. For both techniques, vacuum annealing extends the absorption edge to higher wavelength, but this effect is more pronounced for the ammonia-content technique. The decomposition efficiency of the as-deposited CdS-TiO{sub 2} thin film prepared by the ammonia-free technique is much higher than the as-deposited CdS-TiO{sub 2} prepared by ammonia-content technique. In case of the ammonia-content technique, high-vacuum annealing improves the photocatalytic activity but it has minimal influence in the other technique. The surface morphology of all the CdS thin films was studied by field emission scanning electron microscopy and atomic force microscopy in order to find out the possible inherent reason that leads to a huge difference in the photocatalytic decomposition activity of CdS-TiO{sub 2} thin films.

36 MATERIALS SCIENCE↗

Influence of N{sub 2} gas pressure and negative bias voltage on the microstructure and properties of Cr-Si-N films by a hybrid coating system

Cr-Si-N films were deposited using a hybrid coating system combining arc ion plating and magnetron sputtering. The authors investigated the influence of N{sub 2} flux rate and negative bias voltage on the microstructure and properties of Cr-Si-N films, e.g., chemical composition, film morphology, phase structure, residual stress, and microhardness. The results showed that all the Cr-Si-N films were close to stoichiometry. The N{sub 2} flux rate had no important influence on the microstructure and properties of the Cr-Si-N films. Applying a negative bias voltage resulted in significant decrease in macroparticle densities and smoother film surface. Also the film microstructure transformed from apparent columnar to nanocomposite microstructure. The maximum microhardness obtained ranged from 45 to 50 GPa at a bias voltage ranging from -50 to -100 V. The microhardness enhancement could be ascribed to the mixed effect of grain size diminishment and residual compressive stress.

36 MATERIALS SCIENCE↗

Preparation and thermal desorption properties of dc sputtered zirconium-hydrogen-helium thin films

We developed a new approach for preparing hydrogen and helium co-containing zirconium films (Zr-H-He) to simulate aging metal tritides. We also studied the effect of hydrogen on helium behavior, in which we applied direct current magnetron sputtering in a mixture of working gases (helium, argon, and hydrogen). The amount and depth profile of helium and hydrogen trapped in the films were determined using the elastic recoil detection analysis. The microstructure and surface morphology of the Zr-H-He films were studied by x-ray diffraction, transmission electron microscopy, and atomic force microscopy. To investigate the effect of hydrogen on the thermal release behavior of helium in the Zr film, thermal desorption spectrometry (TDS) was used, which revealed a similar desorption behavior to aged tritides. TDS experiments showed that the spectra were constituted by low-temperature peaks around 300 deg. C and high temperature peaks above 750 deg. C. Furthermore, the solid-phase {alpha} to {delta} transformation changed the shapes of the high-temperature peaks related to microstates of helium bubbles and caused the peak with a massive helium release shift toward lower temperature obviously.

36 MATERIALS SCIENCE↗

Effects of oxygen on low-temperature growth and band alignment of ZnO/GaN heterostructures

Continuous ZnO thin films have been grown at low temperature (400 deg. C) on GaN/c-sapphire substrates in a radio-frequency magnetron-sputtering chamber employing a substoichiometric ZnO target with and without extra oxygen feeding. The effects of oxygen on the growth and band alignment of the ZnO/GaN heterostructures were investigated by using scanning-electron microscopy, x-ray diffraction, photoluminescence and transmittance/absorbance, ultraviolet-resonant Raman scattering, and x-ray photoelectron spectroscopy. Very remarkable changes of the structural and optical properties resulted from the introduction of oxygen: the surface hexahedral facets were diminished; the size of the surface islands and, hence, the compressive strains were reduced; ultraviolet transparency of the ZnO film was enhanced, together with an increased band gap due to the reduced intrinsic shallow-donor defects; and hence, the free-electron concentration. The offset in valence bands of the ZnO/GaN heterostructure was increased by {approx}90 meV at certain conditions. This is likely due to the increased Ga-O bonds at the ZnO/GaN interface by the incorporation of extra oxygen at the initial growth of ZnO.

36 MATERIALS SCIENCE↗

Crystallographic texture control of sputtered HfN thin films using low oxygen partial pressures

The authors studied the development of crystallographic texture in hafnium nitride (HfN) films deposited by off-normal incidence reactive magnetron sputtering at room temperature. Films are prepared with and without added oxygen in N{sub 2}/Ar mixtures. Texture measurements were performed by x-ray pole figure analysis of the (111) and (200) diffraction peaks. The authors found that HfN deposited at 40 deg. without added oxygen has a strong <100> fiber texture with no in-plane alignments showing the dominance of thermodynamic effects in the course of texture evolution. Oxygen is deliberately introduced into the sputtering gas ambient to study its effects on microstructure formation. As the oxygen partial pressure (O{sub 2} pp) is increased in the range of 1.33x10{sup -5} to 1.33x10{sup -4} Pa, HfN out-of-plane orientation changed to <111> with a substantial in-plane alignment in <100> direction as well. In this case, texture analysis of each individual diffraction peak revealed the existence of two populations of grains indicating a competition between (111) and (200) planes. A transition towards hafnium oxynitride phases occurred at high O{sub 2} pp's. The authors propose that oxygen presence during deposition reduces the adatom surface mobility, which enables kinetic effects to govern the texture formation and thus leads to a biaxial alignment in HfN films.

36 MATERIALS SCIENCE↗

Correlation of chemical composition and electrical properties of rf sputtered alumina films

Alumina films were prepared by radio frequency magnetron sputtering from an aluminum oxide target on an indium tin oxide covered glass. The purpose of the study was to test the influence of the sputter parameters on the elemental composition, surface morphology, and electrical insulation properties (breakdown fields and leakage currents). Tested parameters were the sputter gas (Ar) pressure, the sputter rate, the sputter power, the sputter gas composition (Ar:O{sub 2}), the conditioning of the target, the residual base pressure, and the substrate temperature. The surface morphology of the films was investigated by atomic force microscopy. Depth profiles of the elemental compositions were measured by elastic recoil detection using energetic heavy ions, and the insulation properties were investigated by current voltage measurements and impedance spectroscopy. The main finding is that the leakage currents increase by about five orders of magnitude, if the atomic ratio of O:Al increases from 1.35 to 2.0. In parallel the breakdown fields decrease by a factor of 100, and the character of the breakdowns changes from soft to hard. The highest breakdown fields (2.4 MV/cm) and smallest leakage currents (6.5x10{sup -8} A/cm{sup 2} at 2.0 MV/cm) are obtained for slightly Al rich films with small atomic concentrations of H (<0.5 at. %). These films were sputtered in pure Ar and under the lowest possible pressure of the residual gas.

36 MATERIALS SCIENCE↗

Improved optical and electrical properties of rf sputtered Al doped ZnO films on polymer substrates by low-damage processes

Three types of low-damage radio-frequency (rf) magnetron sputtering processes--an interruptive process, a rotating cylindrical holder method, and an off-axis sputtering method--were designed and studied to reduce the film surface temperature during deposition. Low-damage sputtering processes were investigated to improve the resistivity and optical transmittance in the visible range of Al doped ZnO (AZO) thin films deposited on polymer substrates. In the case of the polyethersulfone substrate, AZO films with a resistivity of 1.0x10{sup -3} {omega} cm and an optical transmittance of 75% were obtained by the rotating repeat holder method during rf sputtering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of dopant ion and Mn valence state in the La{sub 1-x}A{sub x}MnO{sub 3} (A=Sr,Ba) colossal magnetoresistance films

The structural and electrical properties of Mn-based colossal magnetoresistance (CMR) thin films with controlled tolerance factor and Mn ion valance ratio were studied using crystal structure and chemical bonding character analyses. La{sub 0.7}Sr{sub 0.3}MnO{sub 3}, La{sub 0.7}Ba{sub 0.3}MnO{sub 3}, and La{sub 0.82}Ba{sub 0.18}MnO{sub 3} thin films with different contents of divalent cations and Mn{sup 3+}/Mn{sup 4+} ratios were deposited on amorphous SiO{sub 2}/Si substrate by rf magnetron sputtering at a substrate temperature of 350 deg. C. The films showed the same crystalline structure as the pseudocubic structure. The change in the sheet resistance of films was analyzed according to strain state of the unit cell, chemical bonding character of Mn-O, and Mn{sup 3+}/Mn{sup 4+} ratio controlling the Mn{sup 3+}-O{sup 2-}-Mn{sup 4+} conducting path. Mn L-edge x-ray absorption spectra revealed that the Mn{sup 3+}/Mn{sup 4+} ratio changed according to different compositions of Sr or Ba and the Mn 2p core level x-ray photoelectron spectra showed that the Mn 2p binding energy was affected by the covalence of the Mn-O bond and Mn{sup 3+}/Mn{sup 4+} ratio. In addition, O K-edge x-ray absorption spectra showed covalently mixed Mn 3d and O 2p states and matched well with the resistivity changes of CMR films. Temperature coefficient of resistance values were obtained at approximately -2.16%/K to -2.46%/K of the CMR films and were correct for infrared sensor applications.

36 MATERIALS SCIENCE↗

Influence of nanostructure on charge transport in RuO{sub 2} thin films

Polycrystalline thin films of RuO{sub 2} were grown on fused-quartz substrates and a parametric study was carried out to probe the influence of film nanostructure on the four-point Van der Pauw resistivity and Hall coefficient. The films were grown via reactive rf magnetron sputtering of a Ru target in an Ar/O{sub 2} plasma using deposition rates from 0.27 to 3.5 A/s and substrate temperatures from 16 to 500 deg. C Room-temperature resistivities of the RuO{sub 2} films ranged from 58 to 360 {mu}{Omega} cm. Upon first heating following deposition, some films showed decreasing resistivity with increasing temperature, but the resistivities also decreased upon subsequent cooling suggesting that the annealing treatment reduces the film defect density. The temperature coefficient of resistance was found to be small (<0.001 K{sup -1}) in agreement with previous investigations. Hall coefficient measurements of the polycrystalline thin films demonstrated that either n-type or p-type majority carriers can be present depending on deposition conditions and the resulting nanostructure, in contrast to single-crystal RuO{sub 2}, which is an n-type metal. Grain size and homogeneous strain within the films were measured by x-ray diffraction and are correlated to the majority carrier type.

36 MATERIALS SCIENCE↗

Microstructure and corrosion resistance of nanocrystalline TiZrN films on AISI 304 stainless steel substrate

This study investigated the microstructure and properties of nanocrystalline TiZrN films on AISI 304 stainless steel substrate. TiZrN films were prepared by reactive magnetron sputtering based on the previous optimum coating conditions (substrate temperature, system pressure, nitrogen flow, etc.) for TiN and ZrN thin films. The composition ratio of TiZrN coatings were adjusted by changing the Zr target power, while keeping the Ti target power constant. Experiments were conduced to find the optimum composition with desired properties. The ratio of TiZrN composition was analyzed by x-ray photoelectron spectroscopy and Rutherford backscattering spectrometer. In terms of phase formation, there were two types of coatings that were considered: single-phase solid solutions of TiZrN and interlacing nuclei of TiZr in the matrix of TiZrN. The thickness of all TiZrN films as measured by the secondary ion mass spectroscopy was about 500 nm, and the composition depth profiles indicated that the compositions in the TiZrN films were uniform from the film surface to the 304 stainless steel substrate. The crystal structure of the TiZrN films was determined by x-ray diffraction using a M18XHF-SRA diffractometer with Cu K{sub {alpha}} radiation. A diffraction peak of TiZrN (002) was observed between that of TiN (002) and ZrN (002); similarly, a diffraction peak of TiZrN (111) was observed between that of TiN(111) and ZrN(111), respectively. The corrosion resistance of the TiZrN film deposited on the 304 stainless steel has been investigated by electrochemical measurement. The electrolyte, 0.5M H{sub 2}SO{sub 4} containing 0.05M KSCN, was used for the potentiodynamic polarization. The potentiodynamic scan was conducted from -800 to 800 mV standard calomel electrode (SCE).

36 MATERIALS SCIENCE↗

Tungsten oxide (WO{sub 3}) thin films for application in advanced energy systems

Inherent processes in coal gasification plants produce hazardous hydrogen sulfide (H{sub 2}S), which must be continuously and efficiently detected and removed before the fuel is used for power generation. An attempt has been made in this work to fabricate tungsten oxide (WO{sub 3}) thin films by radio-frequency reactive magnetron-sputter deposition. The impetus being the use of WO{sub 3} films for H{sub 2}S sensors in coal gasification plants. The effect of growth temperature, which is varied in the range of 30-500 deg. C, on the growth and microstructure of WO{sub 3} thin films is investigated. Characterizations made using scanning electron microscopy (SEM) and x-ray diffraction (XRD) indicate that the effect of temperature is significant on the microstructure of WO{sub 3} films. XRD and SEM results indicate that the WO{sub 3} films grown at room temperature are amorphous, whereas films grown at higher temperatures are nanocrystalline. The average grain-size increases with increasing temperature. WO{sub 3} films exhibit smooth morphology at growth temperatures {<=}300 deg. C while relatively rough at >300 deg. C. The analyses indicate that the nanocrystalline WO{sub 3} films grown at 100-300 deg. C could be the potential candidates for H{sub 2}S sensor development for application in coal gasification systems.

36 MATERIALS SCIENCE↗

Effects of deposition and annealing temperatures on the electrical and optical properties of Ag{sub 2}O and Cu{sub 2}O-Ag{sub 2}O thin films

Ag{sub 2}O and Ag{sub 2}O-Cu{sub 2}O films were deposited on glass substrates by magnetron sputtering of Ag and Cu targets at various substrate temperatures. After deposition, some of these films were annealed using a rapid thermal annealing system, with the variation of temperature. An UV-VIS-NIR photometer and a Hall measurement system were used to characterize the optical and electrical properties of these films. On annealing, Ag{sub 2}O (hexagonal) phase would slowly change to Ag+Ag{sub 2}O (cubic) phases when the annealing temperature is greater than 200 deg. C When the annealing temperature was higher than 450 deg. C, the Ag{sub 2}O phase would transform into a metallic Ag phase completely. Accordingly, the band gap of these films will change, along with the optical and electrical properties. In the study of Ag{sub 2}O-Cu{sub 2}O films, it is found that these two-phase composite films could exist obviously when deposited at room temperature. The photoinduced current of these composite films could be increased significantly, compared with that of a single Cu{sub 2}O phase. This is most likely due to that a large band gap semiconductor (Cu{sub 2}O) is coupled with a small band gap semiconductor (Ag{sub 2}O).

36 MATERIALS SCIENCE↗

In situ analyses on negative ions in the sputtering process to deposit Al-doped ZnO films

The origin of high energy negative ions during deposition of aluminum doped zinc oxide (AZO) films by dc magnetron sputtering of an AZO (Al{sub 2}O{sub 3}: 2.0 wt %) target was investigated by in situ analyses using the quadrupole mass spectrometer combined with the electrostatic energy analyzer. High energy negative oxygen (O{sup -}) ions which possessed the kinetic energy corresponding to the cathode sheath voltage were detected. The maximum flux of the O{sup -} ions was clearly observed at the location opposite to the erosion track area on the target. The flux of the O{sup -} ions changed hardly with increasing O{sub 2} flow ratio [O{sub 2}/(Ar+O{sub 2})] from 0% to 5%. The kinetic energy of the O{sup -} ions decreased with decreasing cathode sheath voltage from 403 to 337 V due to the enhancement of the vertical maximum magnetic field strength at the cathode surface from 0.025 to 0.100 T. The AZO films deposited with the lower O{sup -} bombardment energy showed the higher crystallinity and improved the electrical conductivity.

36 MATERIALS SCIENCE↗

Fabrication of plastic biochips

A versatile surface functionalization procedure based on rf magnetron sputtering of silica was performed on poly(methylmethacrylate), polycarbonate, polypropylene, and cyclic olefin copolymers (Topas 6015). The hybrid thermoplastic surfaces were characterized by x-ray photoelectron spectrometer analysis and contact angle measurements. The authors then used these hybrid materials to perform a sandwich assay targeting an HIV-1 antibody using fluorescent detection and biotinylated peptides immobilized using the bioaffinity of biotin-neutravidin. They found a limit of detection similar to arrays on glass surfaces and believed that this plastic biochip platform may be used for the development of disposable immunosensing and diagnostic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical resistivity change in Al:ZnO thin films dynamically deposited by bipolar pulsed direct-current sputtering and a remote plasma source

The Al-doped ZnO (AZO) thin films for a transparent conducting oxide in solar cell devices were deposited by bipolar pulsed dc magnetron sputtering. This work was performed in an in-line type system and investigated AZO films in a static deposition mode and dynamic one, which is more important in the practical fields. Because of this dynamic deposition process, the zigzagged columnar structure was observed. This resulted in the decreasing electrical property, optical properties, and surface roughness. As a deposition in the dynamic mode, the resistivity increased from 1.64x10{sup -3} to 2.50x10{sup -3} {Omega} cm, as compared to that in the static mode, and the transmittance also decreased from 83.9% to 78.3%. To recover the disadvantage, a remote plasma source (RPS) was supported between the substrate and target for reducing zigzagged formation during the deposition. The deposition rate decreased by using RPS, but the electrical and optical properties of films got better than only dynamic mode. The resistivity and transmittance in the dynamic mode using RPS were 2.1x10{sup -3} {Omega} cm and 85.5%, respectively. In this study, the authors found the possibility to advance the electrical and optical properties of AZO thin films in the industry mode.

36 MATERIALS SCIENCE↗