Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Life Cycle Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

An Analysis of Operational Total Lightning Data During Long-Track Tornadoes

The 27 April 2011 tornado outbreak brought three distinct waves of tornadic thunderstorms to portions of Mississippi, Alabama, Tennessee, and Georgia, striking the Tennessee Valley of north Alabama and southern Tennessee particularly hard. A total of 42 tornado paths were surveyed across the fourteen county area covered by the National Weather Service (NWS) forecast office in Huntsville, Alabama. Ten of these tornadoes were on the ground for at least 20 miles, two had total path lengths over 130 miles, and six tornadoes were classified as violent (EF-4 or EF-5 on the Enhanced Fujita Scale). Many of these tornadoes occurred within the domain of the North Alabama Lightning Mapping Array (NALMA), a ground-based total lightning detection network owned and operated by the NASA Marshall Space Flight Center. Since 2003, the NASA Short-term Prediction Research and Transition Center has supplied data from NALMA in real time to NWS forecast offices in Huntsville, Knoxville/Tri-Cities, Birmingham, and Nashville. Previous research has documented the utility of total lightning information in predicting tornadogenesis, particularly when combined with other remote sensing tools. Basic warning decision-making during events such as 27 April is not the most difficult part of the process; instead, the focus of warning meteorologists shifts to looking for changes in intensity or possible particularly dangerous situations, since doppler radar velocity data often cannot distinguish between weak and strong tornadoes. To that end, this research attempts to determine if any correlation exists between flash densities of the longest-tracked tornadoes over time, and the surveyed wind speeds of the tornadoes. The long-track EF-5 tornado which struck the Hackleburg, Phil Campbell, and Tanner communities in north Alabama was the primary focus of this research due to its intensity and extended life cycle. However, not all tornadoes were available for total lightning analysis due to widespread power outages which negatively affected the detection efficiency and operation of the NALMA. Therefore, additional storms from 2008-2010 with tracks of at least 20 miles were analyzed for comparison purposes.

Carcione, Brian C.↗

Functional analysis of the NH{sub 2}-terminal hydrophobic region and BRICHOS domain of GKN1

Highlights: •NH{sub 2}-terminal and BRICHOS domain of GKN1 inhibited tumor cell growth. •NH{sub 2}-terminal and BRICHOS domain of GKN1 regulated cell cycle. •NH{sub 2}-terminal and BRICHOS domain of GKN1 inhibited epigenetic regulators. -- Abstract: Gastrokine 1 (GKN1) protects the gastric antral mucosa and promotes healing by facilitating restitution and proliferation after injury. GKN1 is down-regulated in Helicobacter pylori-infected gastric epithelial cells and loss of GKN1 expression is tightly associated with gastric carcinogenesis. However, the underlying mechanisms as a tumor suppressor are largely unknown. Presently, the hydrophobic region and BRICHOS domain of GKN1, pGKN1{sup D13N}, pGKN1{sup Δ68–199}, and pGKN1{sup Δ1–67,165–199} were shown to suppress gastric cancer cell growth and recapitulate GKN1 functions. As well, the hydrophobic region and BRICHOS domain of GKN1 had a synergistic anti-cancer effect with 5-FU on tumor cell growth, implying that the NH{sub 2}-terminal hydrophobic region and BRICHOS domain of GKN1 are sufficient for tumor suppression, thereby suggesting a therapeutic intervention for gastric cancer. Also, its domain inducing endogenous miR-185 directly targeted the epigenetic effectors DNMT1 and EZH2 in gastric cancer cells. Our results suggest that the NH{sub 2}-terminal hydrophobic region and BRICHOS domain of GKN1 are sufficient for its tumor suppressor activities.

60 APPLIED LIFE SCIENCES↗

Water Footprint of European Rooftop Photovoltaic Electricity based on Regionalised Life Cycle Inventories

The water use of photovoltaic (PV) electricity has been investigated in very few studies so far, which may be due to the low water demand of PV systems during operation. In this study, the water consumption and water withdrawal of electricity generated by PV systems were assessed by considering all life cycle stages and by taking account of country-level regional differences in water availability. The life cycle inventories of the manufacture of monocrystalline silicon (mono-Si) and cadmium telluride (CdTe) PV modules are based on data collected between 2010 and 2013 and take account of the shares of different countries in total global production. The water use in the life cycle inventories of European rooftop PV systems and conventional electricity generation technologies was regionalised to the country or region (such as continents, political or geographic entities of several countries) level and complemented by the share of water lost by evaporation. The AWARE (Available WAter REmaining) method was used to assess the water stress impact caused by water consumption and water withdrawal of electricity generation by European rooftop PV systems as well as by reservoir hydroelectric power plants and large-scale hard coal and nuclear power plants in Europe. The functional unit of this analysis is 1 kWh of alternating current (AC) electricity (at busbar). The life cycle inventories were linked to KBOB (Coordination Group for Construction and Property Services) life cycle inventory data DQRv2:2016, which are based on ecoinvent data v2.2 and contain updated life cycle inventory data in relevant economic sectors. This study was financed by the Swiss Federal Office of Energy (SFOE) and carried out in the framework of the Task 12 of the Photovoltaic Power Systems Programme (PVPS) of the International Energy Agency (IEA).

14 SOLAR ENERGY↗

Optimal Pathways from Alternative Carbon Feedstocks to Organic Commodity Chemicals

The use of biogenic and waste feedstocks is a promising strategy to improve the chemical sector's supply chain resiliency and carbon intensity. To help inform research efforts that transform these feedstocks into industrial chemicals, we used a systematic analysis framework to consistently evaluate the economics and environmental impacts of >200 alternative production pathways for 51 organic commodity chemicals in the United States under an optimistic future scenario that reflects the potential upper bounds of process scalability, energy availability, and carbon uptake. Lower-impact and lower-cost alternative pathways were identified for all but three chemicals, with 75% using thermochemical routes and half leveraging existing manufacturing infrastructure. Scenario analysis shows that the ranking of these pathways for half of the assessed chemicals is particularly sensitive to carbon uptake assumptions and criteria prioritization (i.e., cost only, environmental impact only, or both), with changes in electricity grid mix, hydrogen source, and underlying mass and energy flow data proving less influential. Implementing alternative pathways for just 11 chemicals could support a transition to net-zero greenhouse gas emissions from chemical production by 2050, with 11% lower cost than business as usual, similar water requirements, quadrupled electricity demand, and the use of most available woody biomass. These findings provide an exploratory guide toward a future chemical industry that harnesses alternative feedstocks.

09 BIOMASS FUELS↗

High-Octane Gasoline from Biomass: Experimental, Economic, and Environmental Assessment

Five economically-advantaged biomass feedstocks identified in the United States Department of Energy's 2016 Billion Ton Study were gasified and the syngas was reformed at the bench scale to study the feedstock price-performance relationship. The distribution of reformed syngas compositions, heating values, and yields were similar across the different feedstocks and blends thereof, which ranged from inexpensive residual wastes to more expensive and higher quality biomass, revealing that feedstock performance was mostly insensitive to its price. Custom blended feedstocks produced syngas with characteristics resembling linear combinations of syngas from single-component feedstocks, supporting the ability to customize and predict blended properties based on single-feedstock data. The experimental gasification data informed a techno-economic analysis of specific feedstock costs for producing high-octane gasoline, and the results showed that miscanthus and forest residues were the most cost-effective. A field-to-wheels life-cycle assessment of greenhouse gas emissions showed that forest residues was the most environmentally benign feedstock of those studied. from inexpensive residual wastes to more expensive and higher quality biomass, revealing that feedstock performance was mostly insensitive to its price. Custom blended feedstocks produced syngas with characteristics resembling linear combinations of syngas from single-component feedstocks, supporting the ability to customize and predict blended properties based on single-feedstock data. The experimental gasification data informed a techno-economic analysis of specific feedstock costs for producing high-octane gasoline, and the results showed that miscanthus and forest residues were the most cost-effective. A field-to-wheels life-cycle assessment of greenhouse gas emissions showed that forest residues was the most environmentally benign feedstock of those studied.

09 BIOMASS FUELS↗

Gene expression profiles in the cerebellum and hippocampus following exposure to a neurotoxicant, Aroclor 1254: Developmental effects

The developmental consequences of exposure to the polychlorinated biphenyls (PCBs) have been widely studied, making PCBs a unique model to understand issues related to environmental mixture of persistent chemicals. PCB exposure in humans adversely affects neurocognitive development, causes psychomotor difficulties, and contributes to attention deficits in children, all of which seem to be associated with altered patterns of neuronal connectivity. In the present study, we examined gene expression profiles in the rat nervous system following PCB developmental exposure. Pregnant rats (Long-Evans) were dosed perinatally with 0 or 6 mg/kg/day of Aroclor 1254 from gestation day 6 through postnatal day (PND) 21. Gene expression in cerebellum and hippocampus from PND7 and PND14 animals was analyzed with an emphasis on developmental aspects. Changes in gene expression ({>=} 1.5 fold) in control animals identified normal developmental changes. These basal levels of expression were compared to data from Aroclor 1254-treated animals to determine the impact of gestational PCB exposure on developmental parameters. The results indicate that the expression of a number of developmental genes related to cell cycle, synaptic function, cell maintenance, and neurogenesis is significantly altered from PND7 to PND14. Aroclor 1254 treatment appears to dampen the overall growth-related gene expression levels in both regions with the effect being more pronounced in the cerebellum. Functional analysis suggests that Aroclor 1254 delays maturation of the developing nervous system, with the consequences dependent on the ontological state of the brain area and the functional role of the individual gene. Such changes may underlie learning and memory deficits observed in PCB exposed animals and humans.

60 APPLIED LIFE SCIENCES↗

Coalition for Community-Supported Affordable Geothermal Energy Systems (C2SAGES)

The C2SAGES project evaluated the feasibility of a community geothermal system for the planned Windy Ridge affordable housing development in Hinesburg, Vermont. Led by GTI Energy with Vermont Gas Systems, LN Consulting, NREL, and Frontier Energy, the work assessed technical design, energy performance, costs, business models, community engagement, maintenance, workforce development, and permitting. The proposed system was designed to serve 100% of the development’s heating, cooling, and domestic hot water loads. Compared with a baseline using air-source heat pumps and natural gas water heating, the geothermal system was estimated to reduce HVAC and domestic hot water energy use by about 45% to 48%, lower operating and maintenance costs, and reduce 30-year life-cycle costs by 37% for Phase 1 and 10% for Phase 2. Technical testing and modeling indicated that the Windy Ridge site is suitable for a community-scale geothermal system. The project also developed borehole field layouts, piping concepts, pump house designs, controls, maintenance plans, and supporting engineering drawings. The business model analysis found that first cost, ownership structure, and customer affordability remain major deployment challenges. Utility-led maintenance and operation were viewed favorably, but traditional utility cost-recovery models may require subsidy or revised financing structures to be practical for affordable housing. Community engagement highlighted the need for clear public education, transparent financing, reliable long-term maintenance, trained technicians, and the potential to pair geothermal systems with weatherization. Overall, the report concludes that community geothermal is technically feasible and offers meaningful energy, emissions, and life-cycle cost benefits, but broader deployment will depend on workable financing models and workforce readiness.

15 GEOTHERMAL ENERGY↗

Supply Cost and Life-Cycle Greenhouse Gas Footprint of Dry and Ensiled Biomass Sorghum for Biofuel Production

Here we discuss Biomass sorghum as a promising feedstock for cellulosic biorefineries because of its high yield and drought tolerance. However, the difficulty of effectively drying sorghum in some regions means that it may require different handling than previously studied grassy feedstocks. This study compares the delivered cost and life-cycle greenhouse gas (GHG) footprint of field drying and baling, module storage (wrapped, densely packed biomass), pelletizing, and ensiling. Ensiling has not been widely considered for use in bioenergy production. For farms within 66 km of the biorefinery, ensiled biomass is of the lowest cost and GHG strategy despite additional cost and energy demand for hauling wet biomass. Field drying and baling, if feasible, is the most cost-effective option for sorghum between 66 km and 104 km, beyond which pellets are preferable. A 2000 bone-dry-metric ton (bdt)/day biorefinery can source sorghum with 18 bdt/ha yield cultivated on 5% of surrounding land at costs ranging from $\$$122 (silage) to $\$$167 (pellets)/bdt and a life-cycle GHG footprint of 111 (silage) to 179 kg CO2e/bdt (pellets). With 28 bdt/ha biomass yield, 10% cultivation of surrounding land, and low fertilizer application, costs can range from $\$$66 (silage) to $\$$85 (pellets)/ bdt and GHG footprint of 43 (silage) to 96 kg CO2e (pellets)/bdt.

09 BIOMASS FUELS↗

TRY - a global database of plant traits

Plant traits – the morphological, anatomical, physiological, biochemical and phenological characteristics of plants and their organs – determine how primary producers respond to environmental factors, affect other trophic levels, influence ecosystem processes and services and provide a link from species richness to ecosystem functional diversity. Trait data thus represent the raw material for a wide range of research from evolutionary biology, community and functional ecology to biogeography. Here we present the global database initiative named TRY, which has united a wide range of the plant trait research community worldwide and gained an unprecedented buy-in of trait data: so far 93 trait databases have been contributed. The data repository currently contains almost three million trait entries for 69,000 out of the world's 300,000 plant species, with a focus on 52 groups of traits characterizing the vegetative and regeneration stages of the plant life cycle, including growth, dispersal, establishment and persistence. A first data analysis shows that most plant traits are approximately log-normally distributed, with widely differing ranges of variation across traits. Most trait variation is between species (interspecific), but significant intraspecific variation is also documented, up to 40% of the overall variation. Plant functional types (PFTs), as commonly used in vegetation models, capture a substantial fraction of the observed variation – but for several traits most variation occurs within PFTs, up to 75% of the overall variation. In the context of vegetation models these traits would better be represented by state variables rather than fixed parameter values. The improved availability of plant trait data in the unified global database is expected to support a paradigm shift from species to trait-based ecology, offer new opportunities for synthetic plant trait research and enable a more realistic and empirically grounded representation of terrestrial vegetation in Earth system models.

54 ENVIRONMENTAL SCIENCES↗

Davis et al. (2025) MDPI Hydrogen Supplement

The raw data and figures used in Davis et al. (2025), "A Comparative Analysis of Waste-as-a-Feedstock Accounting Methods in Life Cycle Assessments," published in MDPI Hydrogen journal.

biogenic carbon↗

Evaluating the economic impacts of using enzymatic membranes to optimize bicarbonate production and delivery to open raceway ponds

Gas sparging is the most commonly used method for delivering CO2 to algal cultures in Open Raceway Ponds (ORPs). While this method is well-tested and effective, these systems experience large amounts of outgassing to the surrounding atmosphere and often achieve carbon utilization efficiencies (CUE) lower than 30%. With such large losses, system are overdesigned to provide CO2 gas in extreme excess, resulting in increased capital and operational expenses. This research is focused on the development, testing, and implementation of a hydrogel membrane seeded with the enzyme carbonic anhydrase and designed to convert gaseous CO2 into aqueous bicarbonate and deliver this inorganic carbon (iC) directly to the algae pond. Despite increased capital expenses for the module, bicarbonate storage tank, and added pumps and infrastructure, preliminary results suggest that the membrane module has the potential to reduce the minimum biomass selling price by 35% by significantly reducing the operational expenditure for CO2.

09 BIOMASS FUELS↗

Large space structures assembly simulation

Simulation requirements for the evaluation of Large Space Structure assembly techniques have been developed by analysis of a typical large space structure through its entire life cycle. Applications of neutral buoyancy, air bearing simulators, computer driven rendezvous and docking simulators, and other simulation modes were studied. Several demonstrations of assembly techniques in neutral buoyancy have been conducted at MSFC using large scale hardware. Experience from those demonstrations and subsequent simulations can be used to select viable approaches for orbital application in operational vehicles. Demonstration results are presented which illustrate techniques and hardware designs that can significantly simplify construction of early large space structures.

Hall, S. B.↗

Flat-plate photovoltaic array design optimization

An analysis is presented which integrates the results of specific studies in the areas of photovoltaic structural design optimization, optimization of array series/parallel circuit design, thermal design optimization, and optimization of environmental protection features. The analysis is based on minimizing the total photovoltaic system life-cycle energy cost including repair and replacement of failed cells and modules. This approach is shown to be a useful technique for array optimization, particularly when time-dependent parameters such as array degradation and maintenance are involved.

Ross, R. G., Jr.↗

Gateway Modeling and Simulation Plan

This plan institutes direction across the Gateway Program and the Element Projects to ensure that Cross Program M&S are produced in a manner that (1) generate the artifacts required for NASA-STD-7009 compliance, (2) ensures interoperability of M&S exchanged and integrated across the program and, (3) drives integrated development efforts to provide cross-domain integrated simulation of the Gateway elements, space environment, and operational scenarios. This direction is flowed down via contractual enforcement to prime contractors and includes both the GMS requirements specified in this plan and the NASASTD- 7009 derived requirements necessary for compliance. Grounding principles for management of Gateway Models and Simulations (M&S) are derived from the Columbia Accident Investigation Board (CAIB) report and the Diaz team report, “A Renewed Commitment to Excellence.” As an outcome of these reports, and in response to Action 4 of the Diaz team report, the NASA Standard for Models and Simulations, NASA-STD-7009 was developed. The standard establishes M&S requirements for development and use activities to ensure proper capture and communication of M&S pedigree and credibility information to Gateway program decision makers. Through the course of the Gateway program life cycle M&S will be heavily relied upon to conduct analysis, test products, support operations activities, enable informed decision making and ultimately to certify the Gateway with an acceptable level of risk to crew and mission. To reduce risk associated with M&S influenced decisions, this plan applies the NASA-STD-7009 requirements to produce the artifacts that support credibility assessments and ensure the information is communicated to program management.

NASA-STD-7009↗

A Parameterized Life Cycle Model for Rapid Quantification of Bioenergy Sustainability Metrics

Life cycle assessment (LCA) is a method for assessing all environmental impacts associated with provisioning a good or service. A life cycle encompasses the system which directly produces a good, as well as all systems and processes on which that system is dependent. The objective of this work is to develop a flexible, parameterized model representing a superstructure of life cycles for advanced biofuel production. Parameterizing the model allows users to define a variety of biofuel production scenarios and assess key sustainability metrics, without needing to acquire additional data or perform separate life cycle assessments. Within the model, parameters will include feedstock species and phenotype, a range of farming and harvest practices, feedstock pre-processing, and operating conditions within the biomass conversion process. The model will be used to identify major impact drivers within bioenergy life cycles and aid CBI researchers and leadership in targeting areas where additional R&D efforts will have the most beneficial impacts.

09 BIOMASS FUELS↗

Comparing Polymer Recycling Technologies for a Circular Plastic Economy

This presentation summarizes the research article "Technical, Economic, and Environmental Comparison of Closed-Loop Recycling Technologies for Common Plastics" by Uekert et al. (ACS Sustainable Chem. Eng., 2023) for a carpet industry audience. It covers the technical performance, environmental impacts, and costs of existing and emerging plastic recycling technologies, with a focus on those that are applicable to carpet materials such as polypropylene and polyester.

carpet↗