Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Launch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

NASA Space Launch System Completes Key Hot Fire Test and Begins Vehicle Integration

The Moon is again in reach. NASA and its commercial and international partners are on the way back. The team is working to land the first woman and the first person of color on the planetary body. NASA and its partners made significant progress towards that goal in the latter half of 2020 and the first half of 2021, including on the agency’s Space Launch System (SLS) rocket – a key part of the Artemis program. The SLS core stage for the Artemis I mission – the first launch of SLS and an uncrewed Orion capsule – completed the Green Run test series and was successfully mated with the SLS twin solid rocket boosters on the mobile launcher at Kennedy Space Center (KSC). All of the major systems for Artemis I are at KSC for assembly, integration, and launch, targeted for late 2021. Work also continued on SLS hardware for Artemis II, which will be the first flight of crew on Orion and SLS. Work progressed on core stage components, booster segments, and other hardware for Artemis III and future missions. This paper will detail the progress made.

John Honeycutt↗

Insitu Lunar Launch & Landing Pad Construction w/ Regolith and Thermoset Polymers

This CIF project is an extension of materials developed under a previous NASA Innovative Advanced Concepts (NIAC) project titled “Regolith Derived Heat Shield for Planetary Body Entry and Descent Systems with In-Situ Fabrication” by M. Hogue et al. (2012). Launch and landing pads are necessary to mitigate risks to lander/ascent vehicles, surface assets, and orbital assets from rocket plume ejected regolith. At this time, all launching and landing on the lunar surface will be on unprepared surface sites. Though this has been a successful approach for Apollo and other uncrewed missions, significant risks exist for the Artemis Program due to the increased thrust of the vehicles, presence of co-located assets, and potential surface level requirements for tall vehicles. This project developed a thermoset polymer–regolith composite material for use as a launch and landing pad. Test articles were prepared at 20% and 11% polymer mass percent (wt%) and tested under hot fire conditions that simulated large vehicle lunar launch/landing conditions. A minimum polymer wt% of 9% was achieved and both samples successfully mitigated regolith ejecta from plume effects. A concept for emplacing launch/landing pads was successfully tested in laboratory environments using a screw and barrel approach to mixing, conveying and depositing materials. It is recommended that materials and systems be developed to TRL 6 for a small-scale lunar demonstration of emplacement of a launch/landing pad via a Commercial Lunar Payload Services (CLPS) mission to support the Artemis Program.

Nathan Gelino↗

Equuleus Launch Window Analysis and Mission Design

This paper presents the trajectory design process for EQUULEUS, a 6U CubeSat developed by JAXA and the University of Tokyo that is scheduled to launch as a piggyback of NASA’s Artemis 1. After separation from the upper stage of the Space Launch System, EQUULEUS will maneuver along a low-energy transfer to an Earth–Moon quasi-rectilinear halo orbit in 1-to-4 resonance with the lunar synodic period. As a secondary payload, the trajectory of EQUULEUS needs to be compatible with the requirements of the primary mission, but also robust against disturbances and potential changes in the deployment state. Realistic initial conditions spanning two years of potential launch windows are processed and the solution structure for optimal lunar transfers is analyzed. A host of candidate solutions is presented, compatibly with the fuel and power limitations of EQUULEUS. The global understanding of the solution space is shown to be insightful for the design of robust trajectories for limited control-authority spacecraft.

Kawakatsu, Yasuhiro↗

An Evaluation of NOAA-20 ATMS Instrument Pre-Launch and On-Orbit Performance Characterization

Passive microwave sounders provide the highest-impact observations ingested by major numerical weather prediction (NWP) forecast models. The Advanced Technology Microwave Sounder (ATMS), built by Northrop Grumman, Azusa, CA, USA, is the latest operational microwave sounder series being launched by the United States to provide both temperature and water vapor soundings of the atmosphere. The first ATMS was launched on the Suomi National Polarorbiting Partnership (SNPP) satellite in 2011. This article focuses on the details of the on-orbit performance characterization of the second ATMS, which launched on November 18, 2017, on the Joint Polar Satellite System-1 (JPSS-1) satellite. After successful commissioning, JPSS-1 was renamed National Oceanic and Atmospheric Administration (NOAA)-20 (N-20). We present performance characterizations from prelaunch and postlaunch tests, including the thermal vacuum (TVAC) campaign, and postlaunch activities that contribute to the radiance data products. Significant improvements were found for reflector emissivity, 1/ f noise performance, antenna beam efficiency, inter-channel noise correlation, and scan drive bearing design. New geolocation and pointing algorithms were evaluated. The N-20 ATMS has the same channel set, polarizations, scan geometry, and calibration approach as the SNPP ATMS. The N-20 ATMS meets all performance requirements with margin.

Advanced Technology Microwave Sounder (ATMS)↗

Predicting Orion Launch Abort Acoustics

Computational fluid dynamics (CFD) scale-resolving simulations were performed to help assess the Orion launch abort system’s vibro-acoustic environment in collaboration with the Orion Loads and Dynamics team at the Johnson Space Center (JSC). The primary objectives are to establish best practices and to validate CFD predictions for surface fluctuating pressure spectra with ground, wind tunnel, and flight test data. Excellent agreement is obtained between CFD predictions by the Cartesian adaptive mesh refinement (AMR) module of the Launch, Ascent, and Vehicle Aerodynamics (LAVA) solver and measurements from a ground test representative of the start of a pad abort scenario, and with measurements from a wind tunnel test case corresponding to a transonic, high total angle of attack ascent abort scenario. A simplified (static and at rest) simulation of a pad abort flight test shows good agreement with the flight data, whereas a more costly simulation where the vehicle is accelerating relative to the ground from rest to Mach 0.4 shows consistent over-prediction of the spectra. Simulation results for a supersonic ascent abort flight test are in reasonable agreement with the measurements, but show larger excursions in regions where non-linear interactions between the plume turbulence, shocks, and turbulent boundary layer are strongest – likely due to CFD modeling assumptions, the effect of which are discussed. Overall, the CFD results demonstrate that scale-resolving simulation methodologies like the one presented can help characterize full-scale launch abort vehicle near-field noise and can complement wind tunnel, ground and flight tests by providing trends and reducing uncertainty for scenarios that cannot or are not planned to be tested.

Orion↗

Accelerance Decoupling: Removing the Influence of the Mobile Launcher from the Space Launch System Integrated Modal Test

Main objective for launch vehicle (LV) modal testing is to quantify the LV’s modal properties in the free-free state (i.e., post pad separation). Given the size of most LVs, free-free testing is a challenge and often not feasible. A test stand, typically the launch pad itself, is utilized as the means to support the LV an Integrated Modal Test (IMT). This shifts the challenge to developing robust numerical methods for removing the influence of the launch pad from the IMT. Preferably fully test driven (method’s that operate based on measured data only). The Accelerance Decoupling (AD) approach, developed and verified by NASA and ASD, is a method with the capability to “subtract out” the influence of the test stand from the IMT using measured data only

Joel Sills↗

Launching and Deploying the James Webb Space Telescope

On December 25, 2021, at 12:20 UTC, the James Webb Space Telescope lifted off and onward to its destination in orbit at the second Lagrange point. With more than two decades in development, and an international collaboration between NASA, CSA, and ESA, Webb is one of the most anticipated science missions ever launched. After a dramatic and flawless launch, Webb's toughest and riskiest days lie ahead. Unprecedented in its complexity and ambition, over the next two weeks Webb would undergo the most complex on-orbit deployment sequence ever attempted, with any single deployment anomaly carrying the risk of full mission failure. An exquisite design, years of ground testing, a exhaustively trained and rehearsed operations and engineering team, and an unprecedented level of contingency planning, all resulted in a fully and successfully deployed Webb observatory, on its way to L2, and nominally cooling to its cryogenic temperatures. Although Webb still had many more months of commissioning left, there was a collective sigh of relief heard round the world. This incredible achievement was not by chance but was years in the making. We go behind the scenes of Webb's first month on orbit, starting with the unique and challenging launch itself, the time criticality of its mid-course corrections, and a summary of nearly 14 days to undergo nearly 50 major deployments. We discuss what went better than planned and how years of robust and detailed contingency planning were prepared for unanticipated events and on-orbit spacecraft behavior. And finally, we provide a brief overview of the entire commissioning process which successfully completed on July 10th, 2022.

Keith A Parrish↗

An Overview of NASA Langley Low-Speed CFD Contributions to the Space Launch System Program

In this review paper, low-speed computational work from NASA Langley in support of the Space Launch System (SLS) is discussed. This information includes both historic and present efforts with the Kestrel CFD solver. The low-speed aerodynamics of SLS is highly complex and analysis of the unsteady flowfield requires significant computational efforts. The SLS mission profile varies from the vehicle static on the launch pad through high-speed ascent, and this paper focuses on the prelaunch as well as liftoff and transition portions of the flight both in proximity to the launch tower and in isolation. High-alpha conditions, as large as 90~deg, result in a flowfield dominated by massive, large-scale flow separation and asymmetric vortices. High-fidelity solutions require an unsteady computational formulation to accurately capture the aerodynamics of the vehicle. A detailed discussion of the computational approach is presented, followed by key efforts to support the program.

Brent W Pomeroy↗

Flame Deflector Ablation Analysis based on Artemis 1 Launch Environment

This paper presents the updated ablative analysis methods used to determine Artemis 1 launch load environment on the flame deflector for the design based on Artemis I Assessments. The flame trench under Pad 39B at Kennedy Space Center contains a flame deflector to safely divert the exhaust plume from the SLS rocket during launch. During launch of Artemis I the refurbished flame trench and the new flame deflector experienced peak temperatures of over 2,000 degrees Fahrenheit (over 1,000 degrees Celsius) for several seconds. These extreme conditions caused ablation (material removal) from the steel plates. This paper contains flame deflector heat flux values for design based on Artemis I assessment. Post flight images of the flame deflector are shown along with “Pre vs Post” Flame Deflector scan image to measure the post flight deviations. Using COMSOL, a method to calculate a heat flux value due to measured deviations in the deflector plates caused by ablation is shown.

Artemis I↗

Low-Speed Space Launch System Computational Fluid Dynamics: A Comprehensive Overview

In this review paper, low-speed computational work from NASA Langley in support of the Space Launch System (SLS) is discussed. This information includes both historic and present efforts with the Kestrel CFD solver. The low-speed aerodynamics of SLS is highly complex and analysis of the unsteady flowfield requires significant computational efforts. The SLS mission profile varies from the vehicle static on the launch pad through high-speed ascent, and this paper focuses on the prelaunch as well as liftoff and transition portions of the flight both in proximity to the launch tower and in isolation. High-alpha conditions, as large as 90 deg, result in a flowfield dominated by massive, large-scale flow separation and asymmetric vortices. High-fidelity solutions require an unsteady computational formulation to accurately capture the aerodynamics of the vehicle. A detailed discussion of the computational approach is presented, followed by key efforts to support the program, both historic and present, including information which has been either previously published or that has never before published external to NASA.

Brent Pomeroy↗

Design, Fabrication, Testing and Validation of a Ruggedized Fiber Optic Sensing System (FOSS) for Launch Application

Fiber-optic sensors based on fiber Bragg grating (FBG) is desirable for structural health monitoring and is used for various aerospace applications such as measuring strain and temperature, where a single optical fiber can multiplex hundreds of FBG sensors. The National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center (AFRC) (Edwards, California) has been developing an optical fiber-based sensing suite called Fiber Optics Sensing System (FOSS) over the past two decades. Successful strain monitoring flight demonstrations such as the NASA Ikhana (General Atomics, San Diego, California) remotely piloted aircraft and the X-56A Multi-Utility Technology Testbed (Lockheed Martin Corporation, Bethesda, Maryland) remotely piloted subscale aircraft have been performed. Interest in adapting fiber-optic sensors for aerospace applications has led to commissioning the development of a ruggedized FOSS system for spaceflight through the NASA Launch Services Program (LSP) at the NASA Kennedy Space Center (KSC) (Merritt Island, Florida). In this paper, a ruggedized FOSS suitable for a launch environment is discussed in detail. Thermal analysis and enclosure design will be discussed as well as environmental testing such as shock, random vibration, thermal vacuum, and electromagnetic interference/electromagnetic compatibility (EMI/EMC). With all relevant environmental testing completed, a ruggedized FOSS unit has successfully passed all testing and is now deemed space-launch ready.

Allen R. Parker, Jr↗

Asymmetric Flow State Switching in the Space Launch System Block 2 Liftoff Environment

An in-depth investigation was conducted at the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel to evaluate flow state switching in the liftoff flow environment of the Space Launch System Block 2 Crew launch vehicle using force measurements, two-component particle image velocimetry, and tuft flow visualization. Multimodal flow states were observed in the gap flow between the centerbody and solid rocket boosters at a range of incoming flow angles and were characterized for the relative strength of state switches. When flow switches occur, the flow is predominantly bimodal, but trimodal flow states are observed with the launch tower downstream of the vehicle. Tuft visualization indicates three-dimensionality during flow state switching, which initiates at one part of the gap and quickly transitions throughout the length of the booster. Due to the long time scales between switches, statistics such as frequency of flow state switches and converged state probabilities cannot be established without significantly increased acquisition times.

Lee J. Mears↗

Validation of Multiphase CFD Predictions of the SLS Launch Environment against Artemis I Flight Data

NASA’s Space Launch System (SLS) is powered by four Aerojet-Rocketdyne RS-25 engines, previously referred to as Space Shuttle Main Engines (SSMEs), with two RSRMV solid rocket boosters (SRBs) derived from the Shuttle booster as seen in Fig. 1. Ignition and the start transient of the SRBs, each of which generate 3.6 million pounds of thrust, create a series of large magnitude pressure waves separate from launch acoustics that have the potential to damage the vehicle if unmitigated. This portion of the SLS launch environment consists of igniter shock (IS), ignition overpressure (IOP), and duct overpressure (DOP).

T. Rivord↗

Asymmetric Flow State Switching on the Space Launch System (SLS) Block 2 Crew Vehicle

An in-depth investigation was conducted at the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel to evaluate flow state switching in the liftoff flow environment of the Space Launch System Block 2 Crew launch vehicle using side force measurements, two-component particle image velocimetry, and tufts flow visualization. Multimodal flow states were observed in the gap flow between the centerbody and solid rocket boosters at a range of incoming flow angles and were characterized for the relative strength of state switches. When flow switches occur, the flow is predominantly bimodal, but trimodal flow states are observed with the launch tower downstream of the vehicle. Tufts visualization indicates three-dimensionality during flow state switching, which initiates at one part of the gap and quickly transitions throughout the length of the booster. Due to the long time scales between switches, statistics such as frequency of flow state switches and converged state probabilities cannot be established without significantly increased acquisition times.

Lee J. Mears↗

Lucy Orbit Determination Performance From Launch Through EGA-1

Lucy is a 12-year long NASA Discovery-class mission which launched on October 16, 2021 and is currently on its way to the Jupiter-Trojan asteroids at the L4 and L5 Lagrange points. On its journey to the Trojan asteroids, Lucy will also fly by two main belt asteroids, and perform 3 Earth fly bys. This paper summarizes primarily the Orbit Determination (OD) aspect of the first year of the mission from launch through the first Earth fly by (EGA-1). Some challenges were encountered for OD as part of the +Y solar array not fully deploying, but these were resolved within the first year of flight. The high quality radio-metric data from the Deep Space Network including 2- and 3-way Doppler, sequential 2-way ranging, complemented by delta differential one-way ranging (∆DOR) has enabled the OD team to characterize the Solar Radiation Pressure force, resolve desaturation maneuvers, generate both maneuver reconstructions and accurate long-term predicted trajectories. This paper discusses the filter setup and strategies implemented, as well as the OD performance from launch, through cruise, and including EGA-1.

Jeroen L. Geeraert↗

Unsteady Surface Pressure Characterization on Launch Vehicle in Liftoff Configuration

Acquisition of unsteady pressure using remote scanners can provide practical advantages over making the same measurements directly using flush-mounted pressure transducers. However, pneumatic distortion of the signal is introduced by the tubing between the sensing module and surface port. This typically limits the usefulness of such measurements to averaged, steady data only, restricting the application of pressure scanners for unsteady pressure measurements in the wind tunnel and flight-testing applications. In this work, unsteady pressure on the surface of a 1.75%-scale model of the NASA Space Launch System Block 1B Cargo vehicle was remotely measured at the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel using an ESP pressure scanner. Subsequent reconstruction using an empirically-tuned, Wiener-filtered inverse transfer function produced excellent agreement compared to nearby surface-mounted transducers within a usable bandwidth of approximately 500 Hz. Interactions between the launch vehicle and the support tower produced strong oscillations that were absent in the vehicle-alone configuration, and it is likely that the wake interaction leads to a resonant flow response when the launch tower is immediately downstream of the vehicle.

Unsteady pressure↗

The Impact of Impulsive Vs Finite Maneuver Modeling on Launch Transfer Trajectories for The Roman Space Telescope

The Nancy Grace Roman Space Telescope (RST) is a flagship astrophysics observatory developed by the NASA Goddard Space Flight Center for launch in the mid-2020’s. The nominal mission orbit for RST is a Sun-Earth L2 quasi-halo orbit subject to stringent geometric and dynamical constraints necessary for achieving mission science objectives. After award of the launch vehicle contract to SpaceX, comparing the launch solutions produced by the RST Flight Dynamics team and the SpaceX team revealed that despite targeting the same interface states, modeling the second-stage insertion burn with an impulsive delta-V vs. a higher fidelity finite burn model can result in substantial differences in achieved libration point orbit properties. In this paper, these differences are explored and leveraged to update the models and targeting strategies used by the RST Flight Dynamics tools. These updates allow the mission to achieve more flight-like ascent and insertion dynamics for the libration point transfer, as well as reveal interesting relationships between the dynamics of impulsive models and finite burn models for libration point transfer trajectories in general.

Lauren Schlenker↗

Leveraging Large Eddy Simulations to Characterize Aeroacoustic Environments on Launch Vehicles

NASA's Space Launch System (SLS) program has relied on multiple wind tunnel campaigns to predict expected aeroacoustic environments. Time, cost, Reynolds number matching, contamination from test section acoustics, and limitations in spatial resolution are all factors that impact the use experimental data for development of launch vehicle environments. Methodological and computational advances over the last decade are enabling scale resolving computational fluid dynamics (CFD) simulations to be completed that can address some the challenges with conventional datasets, enabling more complete/accurate modeling of dynamic loading events on ascent. These simulations are classified as so-called "Large-Eddy Simulations" (LES). As the name implies, these simulations seek to directly resolve the turbulence in the largest, most-energetic turbulent structures, or eddies, and the dissipation of the smallest eddies in the flow field, is modeled. Like anything else, these simulations still must undergo rigorous testing and validation for the results to ultimately be trusted in the analysis of a launch vehicle. EV33 has begun to conduct some of this early-stage testing and validation to better support NASA missions in the future.

Jonathan Boustani↗