Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Optimizing conditions for ultrasound extraction of fullerenes from coal matrices

Conditions for ultrasound toluene extraction of synthetic C60 added to powdered bituminous coal were tested. High-performance liquid chromatography (HPLC) was used to determine the fullerene content in the obtained extracts. The results indicated a possible negative effect of sample demineralization (HCl/HF) and N{sub 2} purging on the extraction yield of C60. On the contrary, a 30% yield increase was registered when the coal was pre-extracted with pentane or pentane/toluene. The best conditions for C60 recovery in the investigated mixtures are 30min of sonication at 280-285K. The effects of sample filtration, sequential extraction, ultrasound bath power and treatments of C60 solution alone are also discussed.

01 COAL, LIGNITE, AND PEAT↗

Development of catalyst free carbon nanotubes from coal and waste plastics

DC-Arc technique has been used to synthesize carbon nanotubes from super clean coal, chemically cleaned coal, original coal and waste plastics instead of using high purity graphite in the presence of metal catalysts. The results obtained are compared in terms of yield, purity and type of carbon nanotubes produced from different types of raw material used. In the present study different types of raw materials have been prepared i.e. chemically cleaned coal and super clean coal, and the carbon nanotubes have been synthesized by DC Arc discharge method. Taking in account the present need of utilizing coal as a cheaper raw material for bulk production of carbon nanotubes and utilization of waste plastics (which itself is a potential environmental threat) for production of such an advance material the present work was undertaken. Since the process does not involve presence of any kind of metal catalyst, it avoids the cost intensive process of removal of these metal particles. The residual coal obtained after refining has major fuel potential and can be utilized for various purposes.

01 COAL, LIGNITE, AND PEAT↗

Effects of minor components in carbon dioxide capture using polymeric gas separation membranes

The capture of carbon dioxide by membrane gas separation has been identified as one potential solution to reduce greenhouse gas emissions. In particular, the application of membranes to CO{sub 2} capture from both pre- and post-combustion strategies is of interest. For membrane technology to become commercially viable in CO{sub 2} capture, a number of factors need to be overcome, one being the role of minor components in the process on membrane performance. This review considers the effects of minor components in both pre- and post-combustion use of polymeric membranes for CO{sub 2} capture. In particular, gases such as SOx, NOx, CO, H{sub 2}S, NH3, as well as condensable water and hydrocarbons are reviewed in terms of their permeability through polymeric membranes relative to CO{sub 2}, as well as their plasticization and aging effects on membrane separation performance. A major conclusion of the review is that while many minor components can affect performance both through competitive sorption and plasticization, much remains unknown. This limits the selection process for membranes in this application.

01 COAL, LIGNITE, AND PEAT↗

Coal-gold agglomeration: an alternative separation process in gold recovery

Considering the increasing environmental concerns and the potential for small gold deposits to be exploited in the future, the uses of environmentally friendly processes are essential. Recent developments point to the potential for greatly increased plant performance through a separation process that combines the cyanide and flotation processes. In addition, this kind of alternative treatment processes to the traditional gold recovery processes may reduce the environmental risks of present small-scale gold mining. Gold recovery processes that applied to different types of gold bearing ore deposits show that the type of deposits plays an important role for the selection of mineral processing technologies in the production of gold and other precious metals. In the last 25 years, different alternative processes have been investigated on gold deposits located in areas where environmental issues are a great concern. In 1988, gold particles were first recovered by successful pilot trial of coal-gold agglomeration (CGA) process in Australia. The current paper reviews the importance of CGA in the production of gold ore and identifies areas for further development work.

01 COAL, LIGNITE, AND PEAT↗

Dry cleaning of Turkish coal

This study dealt with the upgrading of two different type of Turkish coal by a dry cleaning method using a modified air table. The industrial size air table used in this study is a device for removing stones from agricultural products. This study investigates the technical and economical feasibility of the dry cleaning method which has never been applied before on coals in Turkey. The application of a dry cleaning method on Turkish coals designated for power generation without generating environmental pollution and ensuring a stable coal quality are the main objectives of this study. The size fractions of 5-8, 3-5, and 1-3 mm of the investigated coals were used in the upgrading experiments. Satisfactory results were achieved with coal from the Soma region, whereas the upgrading results of Hsamlar coal were objectionable for the coarser size fractions. However, acceptable results were obtained for the size fraction 1-3 mm of Hsamlar coal.

01 COAL, LIGNITE, AND PEAT↗

Adequacy of benzo(a)pyrene and benzene soluble materials as indicators of exposure to polycyclic aromatic hydrocarbons in a Sderberg aluminum smelter

Occupational and environmental exposure to polycyclic aromatic hydrocarbons (PAHs) occurs as a complex mixture that is evaluated using specific components, such as benzo(a)pyrene (BaP) and benzene soluble materials (BSM). Factors that influence the relationship between BaP, BSM, and other PAHs within an aluminum smelter were investigated. Personal samples collected from 1978 to 2001 were used. Differences in the log-transformed ratios (PAH/BaP, BaP/BSM) due to anode paste composition, pot group, season, and job were examined using linear regression. In linear regression, 27% of the variability in the log-transformed BaP/BSM ratio was explained by coal tar pitch, work area, and job; no seasonal or pot group differences were observed. Within the potrooms, BaP was very strongly correlated with other PAHs (majority 0.9). Depending on the PAH, between 23% and 89% of the variability in the log-transformed PAH/BSM was explained by season, coal tar pitch, pot group, and job. The BaP toxic equivalency factors of the mixture varied more across job (2.1-3.5) than across coal tar pitch source (1.8-2.8) or pot group (2.3-2.5). Seasonal and work area differences in the relationship between BaP and other PAHs have not been reported previously.

01 COAL, LIGNITE, AND PEAT↗

Human subject testing of leakage in a loose-fitting PAPR

Leakage from loose-fitting PAPRs (powered air-purifying respirators) can compromise the safety of wearers. The Martindale Centurion MAX multifunction PAPR is a loose-fitting PAPR that also incorporates head, eye, and ear protection. This respirator is used in mines where coal dust usually is controlled by ventilation systems. Should the respirator be depended on for significant respiratory protection? Ten human volunteers were asked to wear the Centurion MAX inside a fog-filled chamber. Their inhalation flow rates were measured with small pitot-tube flowmeters held inside their mouths. They were video imaged while they breathed deeply, and the points at which the fog reached their mouths were determined. Results showed that an average of 1.1 L could be inhaled before contaminated air reached the mouth. As long as the blower purges contamination from inside the face piece during exhalation, the 1.1 L acts as a buffer against contaminants leaked due to overbreathing of blower flow rate.

01 COAL, LIGNITE, AND PEAT↗

Expectations training for miners using self-contained self-rescuers in escapes from underground coal mines

National Institute for Occupational Safety and Health researchers conducted a study to investigate the human response issues related to wearing a self-contained self-rescuer (SCSR). The goal was to develop training to educate miners on what they could expect from their units during an escape. Subjects included miners who had experience wearing SCSRs, manufacturers, and researchers. Results identified nine key areas of concern: (1) starting the unit, (2) unit heat, (3) induction of coughing, (4) unit taste, (5) difficulty in breathing while wearing the unit, (6) quality of the air supplied, (7) nose clips, (8) goggles (9) the behavior of the breathing bag. In addition, researchers reviewed the literature on human response under duress. This article describes the expectations training program, which comprises the findings of the SCSR study, and what is known about the normal human response in an emergency. The authors present background on SCSRs and the SCSR switchover procedure. mandated in the recent federal Mine Improvement and New Emergency Response Act of 2006, which provided the impetus for the expectations training.

01 COAL, LIGNITE, AND PEAT↗

Ergonomics - Using Ergonomics to Enhance Safe Production at a Surface Coal Mine - A Case Study with Powder Crews

Job tasks that involve exposure to work-related musculoskeletal disorder (WMSD) risk factors may impact both the risk of injury and production downtime. Common WMSD risks factors associated with mining tasks include forceful exertions, awkward postures, repetitive motion, jolting and jarring, forceful gripping, contact stress, and whole body and segmental vibration. Mining environments that expose workers to temperature/humidity extremes, windy conditions, and slippery and uneven walking surfaces also contribute to injury risk. National Institute for Occupational Safety and Health (NIOSH) researchers worked with powder crew members from the Bridger Coal Company to identify and rank routine work tasks based on perceived exposure to WMSD risk factors. This article presents the process followed to identify tasks that workers believed involved the greatest exposure to risk factors and discusses risk reduction strategies. Specifically, the proposed prill truck design changes addressed cab ingress/egress, loading blast holes, and access to the upper deck of the prill truck.

01 COAL, LIGNITE, AND PEAT↗

Coal properties and system operating parameters for underground coal gasification

Through the model experiment for underground coal gasification, the influence of the properties for gasification agent and gasification methods on underground coal gasifier performance were studied. The results showed that pulsating gasification, to some extent, could improve gas quality, whereas steam gasification led to the production of high heating value gas. Oxygen-enriched air and backflow gasification failed to improve the quality of the outlet gas remarkably, but they could heighten the temperature of the gasifier quickly. According to the experiment data, the longitudinal average gasification rate along the direction of the channel in the gasifying seams was 1.212 m/d, with transverse average gasification rate 0.069 m/d. Experiment indicated that, for the oxygen-enriched steam gasification, when the steam/oxygen ratio was 2:1, gas compositions remained stable, with H{sub 2} + CO content virtually standing between 60% and 70% and O{sub 2} content below 0.5%. The general regularities of the development of the temperature field within the underground gasifier and the reasons for the changes of gas quality were also analyzed. The 'autopneumatolysis' and methanization reaction existing in the underground gasification process were first proposed.

01 COAL, LIGNITE, AND PEAT↗

Removing arsenic from coal under ultrasonic and microwave radiation: The influence of processing parameter

Arsenic is one of the trace elements in coal that we are most concerned about because of its toxicity and environmental persistence. Poisoning is endemic in China and is widespread and locally very severe, which is receiving increased attention throughout the world. In this study, an oxidation method was applied for removing arsenic from two Chinese coals (Yima and Datong) under ultrasonic and microwave radiation. There are many processing parameters that impact the effect of removing arsenic from coal: power of ultrasonic, time in ultrasonic, time in microwave radiation, and the concentration of coal, and these were considered with several levels in this article.

01 COAL, LIGNITE, AND PEAT↗

Acetylene from the co-pyrolysis of biomass and waste tires or coal in the H{sub 2}/Ar plasma

Acetylene from carbon-containing materials via plasma pyrolysis is not only simple but also environmentally friendly. In this article, the acetylene produced from co-pyrolyzing biomass with waste tire or coal under the conditions of H{sub 2}/Ar DC arc plasma jet was investigated. The experimental results showed that the co-pyrolysis of mixture with biomass and waste tire or coal can improve largely the acetylene relative volume fraction (RVF) in gaseous products and the corresponding yield of acetylene. The change trends for the acetylene yield of plasma pyrolysis from mixture with raw sample properties were the same as relevant RVF. But the yield change trend with feeding rate is different from its RVF. The effects of the feeding rate of raw materials and the electric current of plasmatron on acetylene formation are also discussed.

01 COAL, LIGNITE, AND PEAT↗

Carbon dioxide emission index as a mean for assessing fuel quality

Carbon dioxide emission index, defined as the amount of CO{sub 2} released per unit of energy value, was used to rate gaseous, liquid and solid fuels. The direct utilization of natural gas is the most efficient option. The conversion of natural gas to synthesis gas for production of liquid fuels represents a significant decrease in fuel value of the former. The fuel value of liquids, such as gasoline, diesel oil, etc. is lower than that of natural gas. Blending gasoline with ethanol obtained either from bio-mass or via synthesis may decrease fuel value of the blend when CO{sub 2} emissions produced during the production of ethanol are included in total emissions. The introduction of liquid fuels produced by pyrolysis and liquefaction of biomass would result in the increase in the CO{sub 2} emissions. The CO{sub 2} emissions from the utilization of coal and petroleum coke are much higher than those from gaseous and liquid fuels. However, for petroleum coke, this is offset by the high value gaseous and liquid fuels that are simultaneously produced during coking. Conversion of low value fuels such as coal and petroleum coke to a high value chemicals via synthesis gas should be assessed as means for replacing natural gas and making it available for fuel applications.

01 COAL, LIGNITE, AND PEAT↗

A statistical study on thermogravimetry of some coals in Turkey

A number of physical features of coal can be determined as the function of temperature by the utilization of thermal treatment applied to coal itself. The most common techniques encountered in literature on this matter are differential thermal analysis, thermogravimetric analysis, and differential thermogravimetric analysis. In this article, the thermogravimetric behavior and physicochemical characteristics of some Turkish coals have been defined. Additionally, the relationship between these characteristics of the coal samples has also been given in a statistical manner.

01 COAL, LIGNITE, AND PEAT↗

Temperature profiles of coal stockpiles

Excess of produced coals should be kept in the stockyards of the collieries. The longer the duration time for these coals, the greater possibility for spontaneous combustion to take place. Spontaneously burnt coals result in economical and environmental problems. Therefore, taking the necessary precautions before an outburst of the spontaneous combustion phenomenon is too important in terms of its severe results. In this study, a stockpile having industrial dimensions was formed in coal stockyard. The effective parameters on the stockpiles of coal such as temperature and humidity of the weather, time, and atmospheric pressure values were measured. The interior temperature variations of these stockpiles caused by the atmospheric conditions were also measured. The interior temperature distribution maps of the stockpile together with maximum and minimum temperature values were expressed visually and numerically by the assistance of obtained data.

01 COAL, LIGNITE, AND PEAT↗

Monitoring and ANN modeling of coal stockpile behavior under different atmospheric conditions

In this study, an industrial-sized stockpile of 5 m width, 4 m height, and 10 m length was built in a coal stock area to investigate coal stockpile behavior under different atmospheric conditions. The effective parameters on the coal stockpile that were time, weather temperature, atmospheric pressure, air humidity, velocity, and direction of wind values were automatically measured by means of a computer-aided measurement system to obtain Artificial Neural Network (ANN) input data. The coal stockpiles, which should be continuously observed, are capable of spontaneous combustion and then causing serious economical losses due to the mentioned parameters. Afterwards, these measurement values were used for training and testing of the ANN model. Comparison of the experimental and ANN results, accuracy rates of training, and testing were found as 98.6% and 98.7%, respectively. It is shown that possible coal stockpile behavior with this ANN model is powerfully estimated.

01 COAL, LIGNITE, AND PEAT↗

A review of the factors influencing the physicochemical characteristics of underground coal gasification

In this article, the physicochemical characteristics of the oxidation zone, the reduction zone, and the destructive distillation and dry zone in the process of underground coal gasification (UCG) were explained. The effect of such major factors as temperature, coal type, water-inrush or -intake rate, the quantity and quality of wind blasting, the thickness of coal seams, operational pressure, the length, and the section of gasification gallery on the quality of the underground gas and their interrelationship were discussed. Research showed that the temperature conditions determined the underground gas compositions; the appropriate water-inrush or -intake rate was conducive to the improvement in gas heat value; the properties of the gasification agent had an obvious effect on the compositions and heat value of the product gas. Under the cyclically changing pressure, heat losses decreased by 60%, with the heat efficiency and gasification efficiency being 1.4 times and 2 times those of constant pressure, respectively. The test research further proved that the underground gasifier with a long channel and a big cross-section, to a large extent, improved the combustion-gasification conditions.

01 COAL, LIGNITE, AND PEAT↗

Coal resource estimation in the Bayir field, Yatagan-Mugla, SW Turkey

This study focuses on some coal properties and calculation of coal resources with two classical (isopach and polygon) methods in the Bayir field, Yatagan-Mugla, which is located in southwestern Anatolia. This field has not been mined because it is still in the exploration stage. A productive coal seam of Early (?)-Middle Miocene age has a mineable coal thickness of 1.25 m to 18.01 m. Proximate analysis results indicated that this coal seam contains high moisture, ash, volatile matter, total sulphur content, and net calorific values. The weighted average mineable coal thickness calculated from the isopachs is 7.52 m and 7.82 m from polygonal methods. The in situ tonnages with isopach and polygonal methods were calculated to be 122.8 Mt and 130 Mt, respectively. The average value of the two methods shows 126.4 Mt in situ coal tonnages. Total amount of the in situ mineable coal resources is 77.7 Mt, which indicates an important coal potential in the Bayir field. The overburden thickness ranges from 72 m to 493 m in the Bayir field, averaging 257 m, indicating a deep coal mine. The overburden ratio averages 37 m{sup 3}/ton, indicating an underground coal mine to feed a power plant in near future.

01 COAL, LIGNITE, AND PEAT↗