Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEDs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

High-throughput and microwave investigation of rare earth phosphonatoethanesulfonates-Ln(O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}) (Ln=Ho, Er, Tm, Yb, Lu, Y)

Following the strategy of using bifunctional phosphonic acids for the synthesis of new metal phosphonates, the flexible ligand 2-phosphonoethanesulfonic acid, H{sub 2}O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}H (H{sub 3}L), was used in a high-throughput (HT) and microwave investigation of rare earth phosphonatoethanesulfonates. The HT-investigation led to six isotypic compounds Ln(O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}) with Ln=Ho (1), Er (2), Tm (3), Yb (4), Lu (5) and Y (6). The syntheses were scaled-up in glass reactor tubes in order to obtain larger amounts for a detailed characterization. Based on these results all compounds could be also synthesized by microwave-assisted heating and the influence of reaction time and stirring rate during the synthesis was established. For compound 2 the crystal structure was determined by single-crystal X-ray diffraction. The compounds contain isolated slightly distorted LnO{sub 6} octahedra that are connected by the phosphonate and sulfonate groups into a three-dimensional framework. Thermogravimetric investigations demonstrate the high thermal stability of the compounds up to 460 deg. C. - Graphical abstract: A high-throughput and microwave investigation of the System LnX{sub 3}/H{sub 2}O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}/NaOH/H{sub 2}O led to six new compounds Ln(O{sub 3}P-C{sub 2}H{sub 4}-SO{sub 3}) with Ln=Ho, Er, Tm, Yb, Lu, Y.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tb/Na tobermorite: Thermal behaviour and high temperature products

By heating a sample of Tb/Na tobermorite we obtained a phase which was identified through its X-ray diffraction (XRD) pattern, as terbium silicate apatite. Subsequently this compound has been directly prepared by solid state reaction and we carried out a structural refinement from XRD data in space group P6{sub 3}/m obtaining cell parameters a=9.39199(4) A and c=6.84041(5) A. Terbium silicate apatite heated in melted NaF led to Tb{sub 4}O{sub 7} crystals. - Graphical Abstract: By heating over 900 deg. C Tb/Na tobermorite a terbium silicate apatite was obtained. The same product has been independently prepared and structurally characterized from powder diffraction data. Attempts of crystallizing terbium silicate apatite from melted NaF led to Tb{sub 4}O{sub 7} crystals.

36 MATERIALS SCIENCE↗

High-throughput and in situ EDXRD investigation on the formation of two new metal aminoethylphosphonates - Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}) and Ca(OH)(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3}){center_dot}2H{sub 2}O

The system Ca{sup 2+}/2-aminoethylphosphonic acid/H{sub 2}O/NaOH was systematically investigated using high-throughput methods. The experiments led to one new compound Ca(O{sub 3}PC{sub 2} H{sub 4}NH{sub 2}) (1) and the crystal structure was determined using in house X-ray powder diffraction data (monoclinic, P2{sub 1}/c, a=9.7753(3), b=6.4931(2), c=8.4473(2) A, {beta}=106.46(2) Degree-Sign , V=514.20(2) A{sup 3}, Z=4). The formation of 1 was investigated by in situ energy dispersive X-ray diffraction measurements (EDXRD) at beamline F3 at HASYLAB (light source DORIS III), DESY, Hamburg. An intermediate, Ca(OH)(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3}){center_dot}2H{sub 2}O (2), was observed and could be isolated from the reaction mixture at ambient temperatures by quenching the reaction. The crystal structure of 2 was determined from XRPD data using synchrotron radiation (monoclinic, P2{sub 1}/m, a=11.2193(7), b=7.1488(3), c=5.0635(2) A, {beta}=100.13(4) Degree-Sign , V=399.78(3) A{sup 3}, Z=2). - Graphical abstarct: The detailed in situ energy dispersive X-ray diffraction (EDXRD) investigation on the formation of the new inorganic-organic hybrid compound Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}) leads to the discovery of a new crystalline intermediate phase. Both crystal structures were elucidated using X-ray powder diffraction data. Highlights: Black-Right-Pointing-Pointer High-throughput investigation led to new metal aminoethylphosphonate Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}). Black-Right-Pointing-Pointer The formation of Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 2}) was followed by in situ EDXRD measurements. Black-Right-Pointing-Pointer The crystalline intermediate Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3})(OH){center_dot}2H{sub 2}O was discovered. Black-Right-Pointing-Pointer Isolation of Ca(O{sub 3}PC{sub 2}H{sub 4}NH{sub 3})(OH){center_dot}2H{sub 2}O was accomplished by quenching experiments. Black-Right-Pointing-Pointer The structures were determined using X-ray powder diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-state chemistry route for supported tungsten and tungsten carbide nanoparticles

Nanoparticles of tungsten and tungsten carbide have been prepared using solid-state chemistry methods. After the vapor phase impregnation of a tungsten hexachloride precursor on a carbon support, a temperature-programmed reduction/carburization was performed. Several parameters were investigated and the evolution of obtained samples was followed by XRD and TEM. The optimization of the reaction parameters led to the preparation of W, W{sub 2}C and WC particles well dispersed on the support. WC phase however could not be obtained alone with less than 10 nm mean size. This could be explained by the carburization mechanism and the carbon diffusion on the support. - Graphical abstract: Bright field picture of carbon-supported WC nanoparticles dispersed on the surface of the sample 1223 K in 10% CH{sub 4}/90% H{sub 2}. Highlights: Black-Right-Pointing-Pointer We aimed at the preparation of supported nanoparticulate tungsten derivatives. Black-Right-Pointing-Pointer Several parameters were investigated. Black-Right-Pointing-Pointer The evolution of obtained samples was followed by XRD and TEM. Black-Right-Pointing-Pointer The optimal preparation led to W, W{sub 2}C and WC particles dispersed on the support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence properties of a blue-emitting phosphor: (Sr{sub 1−x}Eu{sub x})Si{sub 9}Al{sub 19}ON{sub 31} (0<x≤1)

Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized at 1800 °C for 2 h under 1 MPa N{sub 2} by using the gas-pressure sintering method (GPS). The microstructure, photoluminescence (PL) properties of the prepared phosphors were investigated. Under the 290 nm excitation, broad PL emission bands with peak positions at 448–490 nm were detected. The concentration quenching was not observed owing to the large distance betweenEu{sup 2+} ions that made the nonradiative energy transfer between neighboring Eu{sup 2+} ions difficult. The blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation, respectively. The interesting PL results indicate that Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} has great potentials as a blue phosphor for white LEDs applications. - Graphical abstract: Sr{sub 0.7}Eu{sub 0.3}Si{sub 9}Al{sub 19}ON{sub 31} gives blue-emitting at 471 nm. Excitation spectrum is composed of five bands in the range of 250–450 nm, which are matching well with emission wavelength of UV LEDs. Display Omitted - Highlights: • Blue-emitting Sr{sub 1−x}Eu{sub x}Si{sub 9}Al{sub 19}ON{sub 31} phosphors were synthesized by gas-pressure sintering method. • The concentration quenching was not observed in this phosphor. • This blue phosphor generally showed a small thermal quenching at low Eu{sup 2+} concentrations. • The absorption and external quantum efficiency of the synthesized Sr{sub 0.5}Eu{sub 0.5}Si{sub 9}Al{sub 19}ON{sub 31} were 85% and 62% upon the 365 nm excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural study of Ca{sub 2}Gd{sub 2}Ge{sub 2}O{sub 9} and optical spectroscopy of the Eu{sup 3+} dopant ion

The new rare earth-based germanate compound Ca{sub 2}Gd{sub 2}Ge{sub 2}O{sub 9} (orthorhombic (Pnma) crystal structure), has been characterized and investigated for the first time, using synchrotron powder X-ray diffraction. From Rietveld refinement calculations on the collected powder pattern we observe an inhomogeneous distribution of the two available cationic sites by Gd{sup 3+} and Ca{sup 2+} ions. In particular, the former prefers the occupation (67.5%) of the site with 8-fold coordination. In addition, we observed a not negligible degree of distortion of the Ge{sub 2}O{sub 7}{sup 6−} unit. Finally, luminescence spectra and decay curves of Eu{sup 3+} doped Ca{sub 2}Gd{sub 2}Ge{sub 2}O{sub 9} were measured and analysed taking into account the structural features of the host. The results reveal that this material shows strong red luminescence upon excitation in the region where blue LEDs emit (470 nm). - Graphical abstract: The structural study on Ca{sub 2}Gd{sub 2}Ge{sub 2}O{sub 9} exploiting synchrotron X-ray diffraction, allows us to determine the detailed geometry of the metal coordination polyhedra, which is closely related to the emission luminescence spectroscopy of the Eu{sup 3+} dopant ion introduced as impurity in this host. - Highlights: • The crystal structure of the Ca{sub 2}Gd{sub 2}Ge{sub 2}O{sub 9} was determined. • Gd{sup 3+} ion is distributed on two crystal sites with different occupation. • A structural study focused on the metal coordination polyhedra was performed. • Two emitting sites are detected for Eu{sup 3+} dopant ion in Ca{sub 2}Gd{sub 2}Ge{sub 2}O{sub 9}. • Strong red luminescence by excitation in the region where blue LEDs emit was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox-active porous coordination polymer based on trinuclear pivalate: Temperature-dependent crystal rearrangement and redox-behavior

Linking of trinuclear pivalate Fe{sub 2}NiO(Piv){sub 6} (Piv=O{sub 2}CC(CH{sub 3}){sub 3}) by 2,6-bis(4-pyridyl)-4-(1-naphthyl)pyridine (L) resulted in formation of 1D-porous coordination polymer Fe{sub 2}NiO(Piv){sub 6}(L)·Solv, which was characterized in two forms: DMSO solvate Fe{sub 2}NiO(Piv){sub 6}(L)(DMSO)·2.5DMSO (1) or water solvate Fe{sub 2}NiO(Piv){sub 6}(L)(H{sub 2}O) (2). X-ray structure of 1 was determined. Crystal lattice of 1 at 160 K contained open channels, filled by captured solvent, while temperature growth to 296 K led to the crystal lattice rearrangement and formation of closed voids. Redox-behavior of 2 was studied by cyclic voltammetry for a solid compound, deposited on glassy-carbon electrode. Redox-activity of L preserved upon incorporation in the coordination polymer. The presence of pores in desolvated sample Fe{sub 2}NiO(Piv){sub 6}(L) was confirmed by the measurements of N{sub 2} and H{sub 2} adsorption at 77 K. Potential barriers of the different molecules diffusion through pores were estimated by the means of molecular mechanics. - Graphical abstract: Redox-behavior of 1D-porous coordination polymer Fe{sub 2}NiO(Piv){sub 6}(L)(H{sub 2}O) was studied by cyclic voltammetry in thin film, deposited on glassy-carbon electrode. Redox-activity of L preserved upon incorporation in the coordination polymer. Potential barriers of different molecules diffusion through pores were estimated by the means of molecular mechanics. - Highlights: • Porous 1D coordination polymer was synthesized. • Temperature growth led to pores closing due to crystal lattice rearrangement. • Redox-activity of ligand preserved upon incorporation into coordination polymer. • Redox-properties of solid coordination polymer were studied in thin film. • Diffusion barriers were evaluated by molecular mechanics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence properties of Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+}, R{sup +} (R{sup +}=Li{sup +}, Na{sup +}, and K{sup +}) red emission phosphor

A series of Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+}, Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, R{sup +}, and Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+}, R{sup +} (R{sup +}=Li{sup +}, Na{sup +}, and K{sup +}) phosphors are synthesized by solid-state reaction method in air. All phosphors show bright red emissions centered at ∼617 nm upon excitation with UV light of 397 nm. Bi{sup 3+} is a sensitizer for the luminescence of Eu{sup 3+}, and can improve significantly the PL intensity of Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+} phosphor due to energy transfer between Bi{sup 3+} and Eu{sup 3+} ions. The sensitization mechanism is investigated and discussed by energy level diagrams of Bi{sup 3+} and Eu{sup 3+} ions. R{sup +} ion is used as the charge compensator to improve the luminescence intensity of Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+} and Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+} phosphors, and their PL intensities are enhanced in the sequence K{sup +}→Na{sup +}→Li{sup +}. These phosphors can be promising red emitting candidate for white LED with a ∼397 nm near UV chip excitation owing to the high brightness. - Graphical abstract: Energy transfer and charge compensation can enhance PL intensity of phosphors obviously. - Highlights: • Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+} phosphor is synthesized. • Energy transfer between Eu{sup 3+} and Bi{sup 3+} ions benefit PL intensity of Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+} phosphor. • Alkaline metal ions can further improve the PL intensity of Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+} phosphor. • Ca{sub 3}Ti{sub 2}O{sub 7}:Eu{sup 3+}, Bi{sup 3+}, R{sup +} phosphor may be promising red emitting candidate for white LED.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure and luminescence properties of a novel red-emitting phosphor BaAlBO{sub 3}F{sub 2}:Eu{sup 3+}

A series of novel red-emitting phosphors BaAlBO{sub 3}F{sub 2}:xEu{sup 3+} (0.001≤x≤0.08) were first synthesized via a high temperature solid-state reaction. X-ray diffraction and photoluminescence spectroscopy were used to characterize the crystal structure and photoluminescence properties of the phosphor, respectively. The phosphor can be effectively excited with a 395 nm light, and shows a dominant {sup 5}D{sub 0}−{sup 7}F{sub 2} emission with chromatic coordination of 0.628 and 0.372. The optimal doping concentration is about 0.04. Rietveld refinement results and the luminescence behavior of Eu{sup 3+} indicate that the Eu{sup 3+} ion occupies a C{sub 3} symmetry site, and the host BaAlBO{sub 3}F{sub 2} has a hexagonal structure with P-6 space group. In addition, the phosphor could be a potential candidate as red-emitting phosphor for application in white light-emitting diode. - Graphical abstract: The luminescence behavior and Rietveld refinement of BaAlBO{sub 3}F{sub 2}:Eu{sup 3+} indicate that the red-emitting phosphor has potential application in white LED and the host has a hexagonal structure with P-6 space group. - Highlights: • A novel red-emitting phosphor BaAlBO{sub 3}F{sub 2}:Eu{sup 3+} is first synthesized. • The crystal structure of BaAlBO{sub 3}F{sub 2} is confirmed. • The phosphor shows potential application in white LED.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid solution barium–strontium chlorides with tunable ammonia desorption properties and superior storage capacity

Metal halide ammines are very attractive materials for ammonia absorption and storage—applications where the practically accessible or usable gravimetric and volumetric storage densities are of critical importance. Here we present, that by combining advanced computational materials prediction with spray drying and in situ thermogravimetric and structural characterization, we synthesize a range of new, stable barium-strontium chloride solid solutions with superior ammonia storage densities. By tuning the barium/strontium ratio, different crystallographic phases and compositions can be obtained with different ammonia ab- and desorption properties. In particular it is shown, that in the molar range of 35–50% barium and 65–50% strontium, stable materials can be produced with a practically usable ammonia density (both volumetric and gravimetric) that is higher than any of the pure metal halides, and with a practically accessible volumetric ammonia densities in excess of 99% of liquid ammonia. - Graphical abstract: Thermal desorption curves of ammonia from Ba{sub x}Sr{sub (1−x)}Cl{sub 2} mixtures with x equal to 0.125, 0.25 and 0.5 and atomic structure of Sr(NH{sub 3}){sub 8}Cl{sub 2}. - Highlights: • Solid solutions of strontium and barium chloride were synthesized by spray drying. • Adjusting molar ratios led to different crystallographic phases and compositions. • Different molar ratios led to different ammonia ab-/desorption properties. • 35–50 mol% BaCl{sub 2} in SrCl{sub 2} yields higher ammonia density than any other metal halide. • DFT calculations can be used to predict properties of the mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure, thermally stability and photoluminescence properties of novel Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphors

A series of novel luminescent phosphors Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} with apatite structure were synthesized via a high temperature solid-state reaction. The phase structure, photoluminescence (PL) properties, the PL thermal stability, as well as the fluorescence decay curves of the samples were investigated to characterize the resulting samples, and the selected Sr{sub 9.97}(PO{sub 4}){sub 6}O:0.03Eu{sup 2+} phosphor exhibits strong thermal quenching resistance, retaining the luminance of 88.73% at 150 °C. The quenching concentration of Eu{sup 2+} in Sr{sub 10}(PO{sub 4}){sub 6}O was about 0.03 attributing to the dipole–quadrupole interaction. The Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphor exhibited a broad-band blue emission at 439 nm upon excitation at 346 nm. The results indicate that Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphors have potential applications as near UV-convertible phosphors for white-light UV LEDs. - Graphical abstract: Sr{sub 10}(PO{sub 4}){sub 6}O:Eu{sup 2+} phosphors have potential applications as near UV-convertible phosphors for white-light UV LEDs. - Highlights: • Sr{sub 9.97}(PO{sub 4}){sub 6}O:0.03Eu{sup 2+} phosphor exhibits strong thermal quenching resistance. • Two different Eu{sup 2+} emission centers exists in Sr{sub 10}(PO{sub 4}){sub 6}O. • The activation energy was also estimated for the Eu{sup 2+} luminescence center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic study on the influence of the morphology of α-MoO{sub 3} in the selective oxidation of propylene

A variety of morphologically different α-MoO{sub 3} samples were prepared by hydrothermal synthesis and applied in the selective oxidation of propylene. Their catalytic performance was compared to α-MoO{sub 3} prepared by flame spray pyrolysis (FSP) and a classical synthesis route. Hydrothermal synthesis from ammonium heptamolybdate (AHM) and nitric acid at pH 1–2 led to ammonium containing molybdenum oxide phases that were completely transformed into α-MoO{sub 3} after calcination at 550 °C. A one-step synthesis of α-MoO{sub 3} rods was possible starting from MoO{sub 3}·2H{sub 2}O with acetic acid or nitric acid and from AHM with nitric acid at 180 °C. Particularly, if nitric acid was used during synthesis, the rod-like morphology of the samples could be stabilized during calcination at 550 °C and the following catalytic activity tests, which was beneficial for the catalytic performance in propylene oxidation. Characterization studies using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy showed that those samples, which retained their rod-like morphology during the activity tests, yielded the highest propylene conversion. - Graphical abstract: Hydrothermal synthesis from MoO{sub 3}·2H{sub 2}O in the presence of HNO{sub 3} led to rod-shaped particles which mainly expose (1 0 0) facets which are the most active surfaces. - Highlights: • Hydrothermal synthesis of MoO3 resulted in either rod or slab shaped particles depending on pH. • At pH<0 rods stable towards calcination and catalytic activity testing were formed. • Rod shaped particles had significantly higher activity than slab shaped ones. • The rod shaped particles mainly expose the (1 0 0) facets which are the most active surfaces. • Total surface area is not main determining factor for catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unsaturated Mn complex decorated hybrid thioarsenates: Syntheses, crystal structures and physical properties

The incorporation of unsaturated [Mn(1,2-dap)]{sup 2+}, [Mn(1,2-dap){sub 2}]{sup 2+}, [Mn(2,2-bipy)]{sup 2+} (1,2-dap=1,2-diaminopropane) complex cations with thioarsenate anions of [As{sup III}S{sub 3}]{sup 3−} and [As{sup V}S{sub 4}]{sup 3−} led to three new hybrid manganese thioarsenates, namely, [Mn(1,2-dap)]{sub 2}MnAs{sub 2}S{sub 6} (1), [Mn(1,2-dap){sub 2}]{[Mn(1,2-dap)]_2As_2S_8} (2) and (NH{sub 4})[Mn(2,2-bipy){sub 2}]AsS{sub 4} (3). In compound 1, the unsaturated [Mn(1,2-dap)]{sup 2+} complexes, [MnS{sub 4}]{sup 6−} tetrahedra and [As{sup III}S{sub 3}]{sup 3−} trigonal-pyramids are condensed to form the 1D [Mn(1,2-dap)]{sub 2}MnAs{sub 2}S{sub 6} chain, whereas compound 2 features 2D layer composed of [Mn(1,2-dap)]{sup 2+} and [Mn(1,2-dap){sub 2}]{sup 2+} complexes as well as [As{sup V}S{sub 4}]{sup 3−} tetrahedral units. For compound 3, two [As{sup V}S{sub 4}]{sup 3−} anions bridge two [Mn(2,2-bipy)]{sup 2+} complex cations into a butterfly like {[Mn(2,2-bipy)]_2As_2S_8}{sup 2−} anionic unit. Magnetic measurements indicate the ferrimagnetic behavior for compound 1 and antiferromagnetic (AF) behaviors for compounds 2–3. The UV–vis diffuse-reflectance measurements and electronic structural calculations based on density functional theory (DFT) revealed the title compounds belong to semiconductors with band gaps of 2.63, 2.21, and 1.97 eV, respectively. The narrow band-gap of compound 3 led to the efficient and stable photocatalytic degradation activity over organic pollutant than N-doped P25 under visible light irradiation. - Highlights: Three new hybrid manganese thioarsenates have been prepared and structurally characterized. These hybrid phases feature interesting magnetic and visible light responding photocatalytic properties.

36 MATERIALS SCIENCE↗

Energetic, electronic and optical properties of lanthanide doped TiO{sub 2}: An ab initio LDA+U study

Substitutional energies, thermodynamic charge transition levels and optical properties of lanthanide doped anatase TiO{sub 2} has been investigated using local density approximation with the Hubbard U correction (LDA+U) within the density functional theory formalism. All the lanthanides apart from La introduced impurity states in the host band gap on doping. The calculated substitutional energies indicate that it is possible to dope TiO{sub 2} with lanthanide ions. The optimal doping percentage was predicted to be ~3% and dopant levels resulting from Ce, Nd, Sm, Gd and Tm doping were found to possess negative U characteristics. In addition the calculated thermodynamic transition levels predicted Lu as not having any possible charge transitions within the host band gap. The calculated optical absorption coefficients indicate that lanthanide doping led to optical absorption in the visible regime. - Graphical abstract: Crystal structure of doped Sm doped TiO{sub 2} (RHS). Calculated PDOS and absorption spectra of Sm doped TiO{sub 2}. - Highlights: • Lanthanide doping significantly improved the optical properties of anatase TiO{sub 2}. • Lanthanide doping led to emission in the visible regions of the optical spectrum. • La, Ce, Pm, Sm, Eu, Gd, Tm, Yb and Lu doping gave good photocatalytic properties. • The optimum doping concentration in anatase TiO{sub 2} was found to be 2.78%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A clear effect of charge compensation through Na{sup +} co-doping on the luminescence spectra and decay kinetics of Nd{sup 3+}-doped CaAl{sub 4}O{sub 7}

We present a detailed analysis of luminescence behavior of singly Nd{sup 3+} doped and Nd{sup 3+}, Na{sup +} co-doped calcium aluminates powders: Ca{sub 1−x}Nd{sub x}Al{sub 4}O{sub 7} and Ca{sub 1−2x}Nd{sub x}Na{sub x}Al{sub 4}O{sub 7} (x=0.001–0.1). Relatively intense Nd{sup 3+} luminescence in IR region corresponding to typical {sup 4}F{sub 3/2}→{sup 4}I{sub J} (J=9/2–13/2) transitions with maximum located at about 1079 nm was obtained in all samples on direct excitation into f–f levels. The effect of dopant concentration and charge compensation by co-doping with Na{sup +} ions on morphology and optical properties were studied. The results show that both, the Nd{sup 3+} concentration and the alkali metal co-doping affected the optical properties but had no influence on the powders morphology. The studies of luminescence spectra (298 and 77 K) in a function of dopant concentration showed an increasing distortion of the local symmetry of Nd{sup 3+}with raising activator content due to certain defects created in the crystal lattice. On the other hand Na{sup +} addition led to significant narrowing of absorption and luminescence bands and also a reduction of the number of their components, showing smaller disturbance of Nd{sup 3+} ions local symmetries. Consequently, charge compensated by Na{sup +} co-doping materials showed significantly enhanced Nd{sup 3+} luminescence. The decrease of emission intensity and luminescence lifetimes with increase of activator concentration was attributed mainly to phonon-assisted cross-relaxation processes between Nd{sup 3+} ions. Analysis with Inokuti–Hirayama model indicated dipole–dipole mechanism of ion-ion interaction. Na{sup +} addition led to much smaller concentration quenching due to smaller clustering of dopant ions in CaAl{sub 4}O{sub 7} lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Particle size effect of redox reactions for Co species supported on silica

Conversions of chemical states during redox reactions of two silica-supported Co catalysts, which were prepared by the impregnation method, were evaluated by using an in situ XAFS technique. The addition of citric acid into the precursor solution led to the formation on silica of more homogeneous and smaller Co particles, with an average diameter of 4 nm. The supported Co{sub 3}O{sub 4} species were reduced to metallic Co via the divalent CoO species during a temperature-programmed reduction process. The reduced Co species were quantitatively oxidized with a temperature-programmed oxidation process. The higher observed reduction temperature of the smaller CoO particles and the lower observed oxidation temperature of the smaller metallic Co particles were induced by the higher dispersion of the Co oxide species, which apparently led to a stronger interaction with supporting silica. The redox temperature between CoO and Co{sub 3}O{sub 4} was found to be independent of the particle size. - Graphical abstract: Chemical state conversions of SiO{sub 2}-supported Co species and the particle size effect have been analyzed by means of in situ XAFS technique. The small CoO particles have endurance against the reduction and exist in a wide temperature range. Display Omitted - Highlights: • The conversions of the chemical state of supported Co species during redox reaction are evaluated. • In operando XAFS technique were applied to measure redox properties of small Co particles. • A small particle size affects to the redox temperatures of cobalt catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of adiabatic shear bands in AM60B magnesium alloy under ballistic impact

Adiabatic shear bands in Mg alloy under ballistic impact at a velocity of 0.5 km.s{sup -1} were characterized by means of optical microscope, scanning electron microscope, transmission electron microscope and indenter technique. The results show that adiabatic shear bands were formed around the impacted crater, and the deformed and transformed bands were distinguished by etching colors in metallographic observation. TEM observation shows that the deformed bands were composed of the elongated grains and high density dislocations, while the transformed bands composed of the ultrafine and equiaxed grains were confirmed. In initial stage, the severe localized plastic deformation led to the formation of elongated grains in the deformed bands. With localized strain increasing, the severe localized deformation assisted with the plastic temperature rising led to the severe deformation grains evolved into the ultrafine and equiaxed grains, while the deformed bands were developed into transformed bands. The formation of the ultrafine and equiaxed grains in the transformed bands should be attributed to the twinning-induced rotational dynamic recrystallization mechanism. High microhardness in the bands was obtained because of the strain hardening, grain refining and content concentration. - Research Highlights: {yields} Deformed and transformed bands are found in Mg alloy under ballistic impact. {yields} The microstructures in the deformed and transformed bands are characterized. {yields} The evolution process of the microstructure in the bands is discussed.

36 MATERIALS SCIENCE↗

Influence of vanadium incorporation on the microstructure, mechanical and tribological properties of Nb–V–Si–N films deposited by reactive magnetron sputtering

Composite Nb–V–Si–N films with various V contents (3.7–13.2 at.%) were deposited by reactive magnetron sputtering and the effects of V content on the microstructure, mechanical and tribological properties of Nb–V–Si–N films were investigated. The results revealed that a three-phase structure, consisting of face-centered cubic (fcc) Nb–V–Si–N, hexagonal close-packed (hcp) Nb–V–Si–N and amorphous Si{sub 3}N{sub 4}, co-exists in the Nb–V–Si–N films and the cubic phase is dominant. The hardness and critical load (L{sub c}) of Nb–V–Si–N films initially increased gradually and reached a summit, then decreased with the increasing V content in the films and the maximum values were 35 GPa and 9.8 N, respectively, at 6.4 at.% V. The combination of V into Nb–Si–N film led to the fracture toughness linearly increasing from 1.11 MPa·m{sup 1/2} at 3.7 at.% V to 1.67 MPa·m{sup 1/2} at 13.2 at.% V. At room temperature (RT), the average friction coefficient decreased from 0.80 at 3.7 at.% V to 0.55 at 13.2 at.% V for the Nb–V–Si–N films. The wear rate of Nb–V–Si–N films initially decreased and then increased after reaching a minimum value of about 6.35 × 10{sup −} {sup 7} mm{sup 3}/N·mm at 6.4 at.% V. As the rise of testing temperature from 200 °C to 600 °C, the average friction coefficient of Nb–V–Si–N films decreased with the increase of the testing temperature regardless of V content. However, the wear rate gradually increased for all films. The average friction coefficient and wear rate at RT and elevated temperatures were mainly influenced by the vanadium oxides with weakly bonded lattice planes. - Highlight: • Fcc-Nb–V–Si–N, hcp-Nb–V–Si–N and amorphous Si{sub 3}N{sub 4} co-existed in the films. • The amount of Si{sub 3}N{sub 4} decreased with increasing V content in the films. • Hardness of Nb–V–Si–N film (6.4 at.%) reached a maximum value of 35 GPa. • Addition of V led to the increase of fracture toughness. • Tribological properties were influenced by lubricant wear debris.

36 MATERIALS SCIENCE↗