Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GASOLINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Conversion of landfill gas to liquid fuels through a TriFTS (tri-reforming and Fischer–Tropsch synthesis) process: a feasibility study

Biogas produced in landfills contains large amounts of methane (a potent greenhouse gas) and hence requires collection and treatment according to EPA regulations. Tri-reforming of such biogas (CH 4 + CO 2 ) is a combination of dry reforming, steam reforming, and partial oxidation to produce syngas (CO + H 2 ). This syngas can be converted to liquid hydrocarbons using Fischer–Tropsch Synthesis (FTS). A novel technology of combining tri-reforming and FTS (TriFTS) is proposed and utilized here to convert landfill gas (LFG) to high value added liquid hydrocarbon fuels such as gasoline, diesel, and jet fuel. This article explores the feasibility of TriFTS from an experimental and process economics point of view. Landfill gas collected from a local landfill was used in this study. After removing contaminant gases such as H 2 S and NH 3 via condensation and adsorption, NiMg/Ce 0.6 Zr 0.4 O 2 pellets were used in a tri-reforming reactor to produce H 2 and CO in a ratio suitable for FTS. The conversions of CH 4 and CO 2 were 99% and 60%, respectively. The H 2 /CO molar ratio was 1.7. In the FTS section, a Co/SiO 2 eggshell catalyst was used to synthesize liquid hydrocarbon with high selectivity for middle distillate cuts. The CO conversion in FTS was 71% and the liquid hydrocarbon product was similar to that of low sulfur diesel. The experimental results were used to conduct a preliminary economic analysis of a commercial scale TriFTS process. The results indicate that 45% of the energy contained in the LFG can be recovered in the liquid fuel generated, with the rest going to meet the energy demands of the conversion process including heat losses. The breakeven cost of diesel fuel produced was estimated as $3.24 per gal but reduces to 2.71 per gal if the LFG is assumed to be free of cost as would be the case for landfill operators. Additional renewable fuel credits will make the process even more economically attractive. This study suggests that conversion of LFG to liquid fuels is a promising new technology ripe for commercialization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advanced fuels from ethanol – a superstructure optimization approach

We develop a superstructure framework for the design of biorefineries for ethanol upgrading into advanced biofuels to replace gasoline, jet fuel or diesel. The framework integrates catalysis, process synthesis, and fuel property modelling towards the design of biorefineries producing fuels with specified properties. The proposed framework is applied to identify strategies for the upgrading of ethanol into one or more fuels with specific properties. We discuss the trade-off between profit and biorefinery complexity, as well as the relation among fuel property constraints, the optimal upgrading strategy selected, and process economics. Lastly, we show how to find the optimal biorefinery associated with a particular chemistry or catalyst. The results presented constitute the first systematic study of ethanol upgrading considering, simultaneously, fuel and process design.

09 BIOMASS FUELS↗

Supercritical water co-liquefaction of LLDPE and PP into oil: properties and synergy

The major plastic wastes are always mixtures, which are difficult to separate to treat in practice. Because of some possible cross-reactions, the degradation behaviors of plastics could not be mathematically represented by a simple addition of each polymer according to their proportions. This work examines supercritical water (scH 2 O) to liquefy poly-ethylene and poly-propylene mixtures into an oil with special interest in the oil quality and positive effect. Additionally, linear low-density polyethylene (LLDPE) and polypropylene (PP) were chosen as parent materials because of their high proportions in plastic wastes. The results show that a high conversion rate of around 99.75% was achieved with as high as 90.7 wt% oil yield without additional catalysts or hydrogen. The scH 2 O co-liquefaction of the LLDPE/PP mixture was different from that of the single polymer along with an improvement in the oil yield. Cyclic hydrocarbon ( i.e. , cyclic) generation was promoted while the production of paraffins was hindered in scH 2 O co-liquefaction using a mixture of LLDPE/PP. TGA reveals that the scH 2 O co-liquefaction of LLDPE/PP mixtures generated more diesel and lubricant oils and less gasoline and (jet fuel + light diesel) oils, thus slightly lowering the oil quality. Overall, the supercritical fluid technology was a powerful and promising means to liquefy mixed plastic wastes into oil at a high conversion rate free of catalysts or hydrogen.

42 ENGINEERING↗

Catalytic co-pyrolysis of LDPE and PET with HZSM-5, H-beta, and HY: experiments and kinetic modelling

In this study, the catalytic pyrolysis of low-density polyethylene (LDPE), polyethylene terephthalate (PET) and their mixture (1 : 1 wt/wt) with three zeolite catalysts (HZSM-5, H-beta, HY) was investigated using a thermogravimetric analyzer (TGA) and a Pyroprobe® micro-reactor coupled to a gas chromatograph mass spectrometer (Py-GC/MS). The TGA results demonstrated that during pyrolysis at 10 °C min –1 , on average, zeolite catalysts decreased the maximum decomposition temperature by 149 °C for LDPE while only decreasing by 8 °C for PET. The derivative thermogravimetric (DTG) curve evidenced interactions when the two polymers were catalytically co-pyrolyzed for all the three catalysts. A lumped nth order reaction scheme was able to accurately model both non-catalytic and catalytic pyrolysis and co-pyrolysis by using the least squares fitting approach for determining the kinetic parameters. The kinetic model was able to model well the interaction effects observed during catalytic co-pyrolysis of LDPE and PET with HZSM-5, H-beta, and HY (Fit% Wt% > 96%, Fit% DTG > 94%). Py-GC/MS experiments for the catalytic fast pyrolysis of LDPE revealed that HZSM-5 resulted in the highest selectivity to aromatic hydrocarbons (31.6%) and HY resulted in the highest selectivity to gasoline range C 5 –C 10 paraffins and olefins (40.9%). Catalytic fast pyrolysis of PET showed high selectivity to benzene for all the catalysts (>43%) and that HZSM-5 resulted in the highest selectivity to polyaromatic hydrocarbons (24.7%). Finally, the catalytic fast co-pyrolysis of LDPE and PET revealed interaction effects for all the three catalysts evidenced by a positive synergy% for alkylated benzenes (3–142%) and polyaromatics (105–187%) with a concomitant negative synergy% for benzene (24–36%) and C 5 –C 10 paraffins and olefins (27–53%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ethanol to diesel: a sustainable alternative for the heavy-duty transportation sector

The combustion of middle distillates (diesel and jet fuel) is responsible for the emission of more than 2 GTon of CO 2 per year worldwide. While sustainable alternatives exist for gasoline and jet fuel, we still lack sustainable alternatives for diesel. This fact is especially relevant if we consider that electrification of sectors where diesel is used is challenging. One sustainable approach for diesel production is the catalytic upgrading of ethanol. While most work in this field has focused on the dehydration/oligomerization of ethanol, this approach is limited to producing fuels that have a high degree of branching and low cetane number. Another approach is the sequential use of ethanol Guerbet coupling, leading to higher alcohols, followed by etherification, leading to large ethers which, importantly, result in a product with high cetane number. In this work, we explore the catalytic upgrading of ethanol into diesel following an approach based on the initial Guerbet coupling of ethanol followed by etherification. The results presented are a collaborative and synergic effort among process and systems engineers, experimentalist in the area of catalysis, and fuel property modelers. Here, we demonstrate experimentally the feasibility of upgrading ethanol into a diesel fuel with properties that surpass its fossil counterpart. The diesel produced has a predicted cetane number of ~70 and outstanding cold flow properties, while maintaining other properties (viscosity, density, and flash point) within expected ranges. A technoeconomic analysis performed based on a detailed biorefinery model shows that the MFSP is ~5.89$ per Gal in 2021 dollars when lignocellulosic ethanol is used, with the most relevant economic driver the cost of the ethanol feedstock. The upgrading process can be performed with a net energy gain (EROI = 1.49 > 1). An LCA analysis of greenhouse gas (GHG) emissions reveals that the use of lignocellulosic ethanol may lead to more than 50% reduction in GHG emissions compared to fossil diesel. Depending on the CO 2 emissions associated with the production of ethanol we show that in some instances the production of carbon neutral diesel fuel is possible.

09 BIOMASS FUELS↗

Opening pathways for the conversion of woody biomass into sustainable aviation fuel via catalytic fast pyrolysis and hydrotreating

Meeting aggressive decarbonization targets set by the International Civil Aviation Organization (ICAO) will require the rapid development of technologies to produce sustainable aviation fuel (SAF). Catalytic fast pyrolysis (CFP) can support these efforts by opening pathways for the conversion of woody biomass into an upgraded biogenic oil that can be further processed to SAF and other fuels. However, the absence of end-to-end experimental data for the process leads to uncertainty in the yield, product quality, costs, and sustainability of the pathway. The research presented here serves to address these needs through a series of integrated experimental campaigns in which real biomass feedstocks are converted to a final SAF product using large bench-scale continuous reactor systems. For these campaigns, the degree of catalytic upgrading during CFP was varied to produce CFP-oils with oxygen contents of 17 and 20 wt% on a dry basis. The CFP-oils were then hydrotreated and distilled into gasoline, diesel, and SAF fractions. Detailed yield and compositional data were obtained for each step of the process to inform technoeconomic and lifecycle analyses, and the fuel properties of the SAF fraction were evaluated to provide first-of-its-kind insight into the quality of the final product. This research reveals opportunities to optimize process carbon efficiency by tuning the degree of catalytic upgrading during the CFP step and highlights routes to produce a high-quality cycloalkane-rich SAF with 85–92% reduction in greenhouse gas emissions compared to fossil-based pathways.

09 BIOMASS FUELS↗

Tungsten single-atom catalysts for the efficient conversion of isobutene into highly branched liquid hydrocarbons

The catalytic transformation of isobutene into branched liquid hydrocarbons is crucial for the production of reformulated gasoline and fuel additives. Conventional supported catalysts often lack high activity and selectivity toward the desired highly branched dimers and trimers in isobutene oligomerization. Here, by developing a tungsten single-atom catalyst (W SAC ) atomically dispersed on a silica-doped alumina (SDA) support, we report that the W SAC /SDA catalyst enables efficient and selective conversion of isobutene into highly branched C 8 and C 12 liquid olefins while suppressing the formation of heavier hydrocarbons. The atomically dispersed W 1 –O 3 moieties incorporated within the SDA support were synthesized via a high-temperature pyrolysis of a templating zinc metal–organic framework (Zn-MOF) under argon, followed by annealing in static air. The W SAC /SDA catalysts with 1.6–3.7 wt% W loading exhibited single-atom dispersion (∼0.2 nm) and outstanding performance, achieving up to 60% and 95% selectivity to branched C8 olefins at 150 °C and 250 °C, respectively, under ambient pressure. With the demonstrated high activity, selectivity, and stability, the W SAC /SDA catalyst system presents a promising platform for next-generation heterogeneous catalysts for the efficient and selective upgrading of isobutene into high-performance fuel additives.

Branched Olefins↗

The Effect of Time dealumination and Solvent Concentration in Synthesis of Zeolite Catalyst and Catalytic Test for DiEthyl Ether Production Process

Ethanol is an alternative energy, but its has three distinct disadvantages as a transportation fuel. Its availability is currently limited, and it has a lower volumetric heating value and a lower Reid vapour pressure (RVP) than gasoline. This paper focuses for this disadvantages and to solve this problem can do with converts ethanol to DiEthyl Ether product. This research produced DiEthyl Ether by ethanol dehydration process with zeolite as catalyst. The catalyst synthesis from natural material from District Gunung Kidul, Indonesia. The catalyst produced with dealumination, neutralization, drying and calcination processes. The zeolite catalyst was analysed of Si/Al, X-ray Diffraction and specific surface area. The catalyst product then used for ethanol dehydration to produce DiEthyl Ether. The results shown the biggest surface area is 184,52 m{sup 2}/gram at catalyst production at 10 hours for time dealumination. The crystallite of catalyst product is similar like shown at diffractogram of XRD analysis. The ratio Si/Al biggest is 313.7 that obtaining at catalyst production with 7 hours for time dealumination. The catalytic test use fixed bed reactor with 1 inci diameter and ethanol fermentation both as feed. The operation condition is 150 deg. C at temperature and atmosphere pressure. The compounds product in liquid phase are diethyl ether, methanol and water.

36 MATERIALS SCIENCE↗

Conformation-specific spectroscopy of alkyl benzyl radicals: Effects of a radical center on the CH stretch infrared spectrum of an alkyl chain

An important initial step in the combustion of gasoline and diesel fuels is the abstraction of hydrogen from alkylbenzenes to form resonance-stabilized alkyl benzyl radicals. This work uses, for the first time, double resonance spectroscopy methods to explore the conformation-specific vibronic and infrared spectroscopy of the α-ethylbenzyl (αEtBz) and α-propylbenzyl (αPrBz) radicals. Local mode Hamiltonian modeling enables assignment of the alkyl CH stretch IR spectra, accounting for Fermi resonance that complicates aliphatic alkyl CH stretch IR spectroscopy. The ground state conformational preferences of the ethyl and propyl chains are changed from those in the alkylbenzenes themselves, with global minima occurring for an in-plane orientation of the alkyl chain (trans) about its first dihedral angle (Φ f123 , numbers are alkyl C atoms. C 1 is CH radical site). This in-plane structure is the only observed conformer for the α-EtBz radical, while two conformers, tt and tg' share this orientation at the first dihedral, but differ in the second (Φ 1234 ) for the αPrBz radical. The in-plane orientation lowers the local site frequencies of the CH 2 group stretches immediately adjacent to the benzylic radical site by about 50 cm -1 relative to those in pure alkyl chains or alkylbenzenes. This effect of the radical site is localized on the first CH 2 group, with little effect on subsequent members of the alkyl chain. In the D 1 excited electronic state, an out-of-plane orientation is preferred for the alkyl chains, leading to torsional mode Franck-Condon activity in the D 0 -D 1 spectra that is both conformer-specific and diagnostic of the conformational change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ multimodal imaging for nanoscale visualization of tribofilm formation

A third of the energy from fuel combustion in passenger car gasoline engines is lost due to friction. Carefully designed engine lubricants can recover some of these losses by reducing friction and wear by forming a nanometer-scale chemico-physico tribofilm between surfaces. Accordingly, attention has focused on developing oil formulations that form low-friction tribofilms. However, analyses of resultant tribofilms are typically conducted after tribo-tests with conventional characterization tools and do not offer insights into tribofilm formation and evolution, precluding information critical to tuning tribofilm properties. In this work, we developed a unique multimodal methodology based on Atomic Force Microscopy (AFM) with local probe heating for in situ tribological studies that activates friction modifiers and simultaneously captures the evolution of friction and surface roughness, with nanometer resolution. As a platform to demonstrate the ability of this methodology to visualize dynamics of tribofilm formation in situ, we apply it to molybdenum-based friction modifiers to distinguish key factors in their functionality and correlate nanoscale AFM and Friction Force Microscopy data to bench tribo-tests used in the industry. To decode the formation mechanisms observed in situ and underlying chemistry of tribofilms, we performed ab initio Molecular Dynamics (AIMD) simulations at comparable conditions. AIMD simulations confirmed both nanoscale and bench tribo-test results and showed deviations in molecular organization in tribofilms that are formed from different molybdenum-based friction modifiers that corroborates with surface functionality. With this innovative methodology, we demonstrate proof-of-principle in situ formation of molybdenum-based tribofilms directly on steel surfaces that could be applied generally to studying tribofilm formation.

36 MATERIALS SCIENCE↗

Life cycle air quality impacts of conventional and alternative light-duty transportation in the United States

Significance Our assessment of the life cycle air quality impacts on human health of 10 alternatives to conventional gasoline vehicles finds that electric vehicles (EVs) powered by electricity from natural gas or wind, water, or solar power are best for improving air quality, whereas vehicles powered by corn ethanol and EVs powered by coal are the worst. This work advances the current debate over the environmental impacts of conventional versus alternative transportation options by combining detailed spatially and temporally explicit emissions inventories with state-of-the-science air quality impact analysis using advanced chemical transport modeling. Our results reinforce previous findings that air quality-related health damages from transportation are generally comparable to or larger than climate change-related damages.

33 ADVANCED PROPULSION SYSTEMS↗

Novel pathways for fuels and lubricants from biomass optimized using life-cycle greenhouse gas assessment

Decarbonizing the transportation sector is critical to achieving global climate change mitigation. Although biofuels will play an important role in conventional gasoline and diesel applications, bioderived solutions are particularly important in jet fuels and lubricants, for which no other viable renewable alternatives exist. Producing compounds for jet fuel and lubricant base oil applications often requires upgrading fermentation products, such as alcohols and ketones, to reach the appropriate molecular-weight range. Ketones possess both electrophilic and nucleophilic functionality, which allows them to be used as building blocks similar to alkenes and aromatics in a petroleum refining complex. Here, we develop a method for selectively upgrading biomass-derived alkyl methyl ketones with >95% yields into trimer condensates, which can then be hydrodeoxygenated in near-quantitative yields to give a new class of cycloalkane compounds. The basic chemistry developed here can be tailored for aviation fuels as well as lubricants by changing the production strategy. We demonstrate that a sugarcane biorefinery could use natural synergies between various routes to produce a mixture of lubricant base oils and jet fuels that achieve net life-cycle greenhouse gas savings of up to 80%.

09 BIOMASS FUELS↗

Engineering Yarrowia lipolytica as a platform for synthesis of drop-in transportation fuels and oleochemicals

Harnessing lipogenic pathways and rewiring acyl-CoA and acyl-ACP (acyl carrier protein) metabolism in Yarrowia lipolytica hold great potential for cost-efficient production of diesel, gasoline-like fuels, and oleochemicals. Here we assessed various pathway engineering strategies in Y. lipolytica toward developing a yeast biorefinery platform for sustainable production of fuel-like molecules and oleochemicals. Specifically, acyl-CoA/acyl-ACP processing enzymes were targeted to the cytoplasm, peroxisome, or endoplasmic reticulum to generate fatty acid ethyl esters and fatty alkanes with tailored chain length. Activation of endogenous free fatty acids and the subsequent reduction of fatty acyl-CoAs enabled the efficient synthesis of fatty alcohols. Engineering a hybrid fatty acid synthase shifted the free fatty acids to a medium chain-length scale. Manipulation of alternative cytosolic acetyl-CoA pathways partially decoupled lipogenesis from nitrogen starvation and unleashed the lipogenic potential of Y. lipolytica. Finally, taken together, the strategies reported here represent promising steps to develop a yeast biorefinery platform that potentially upgrades low-value carbons to high-value fuels and oleochemicals in a sustainable and environmentally friendly manner.

09 BIOMASS FUELS↗

Unexpected slowdown of US pollutant emission reduction in the past decade

Ground and satellite observations show that air pollution regulations in the United States (US) have resulted in substantial reductions in emissions and corresponding improvements in air quality over the last several decades. However, large uncertainties remain in evaluating how recent regulations affect different emission sectors and pollutant trends. Here we show a significant slowdown in decreasing US emissions of nitrogen oxides (NO x ) and carbon monoxide (CO) for 2011–2015 using satellite and surface measurements. This observed slowdown in emission reductions is significantly different from the trend expected using US Environmental Protection Agency (EPA) bottom-up inventories and impedes compliance with local and federal agency air-quality goals. We find that the difference between observations and EPA’s NO x emission estimates could be explained by: (i) growing relative contributions of industrial, area, and off-road sources, (ii) decreasing relative contributions of on-road gasoline, and (iii) slower than expected decreases in on-road diesel emissions.

54 ENVIRONMENTAL SCIENCES↗

Driving the grid forward: How electric vehicle adoption shapes power system infrastructure and emissions

We model the effect of plug-in electric vehicle (EV) adoption on U.S. power system generator capacity investment, operations, and emissions through 2050 by estimating power systems outcomes under a range of EV adoption trajectory scenarios. Our EV adoption scenarios are informed by 1) an Energy Information Administration scenario with no policy intervention, 2) EV growth expected under the Inflation Reduction Act (IRA), 3) a Biden Administration 50% EV sales target by 2030, 4) the Environmental Protection Agency’s projections under vehicle emissions standards, and 5) the International Energy Agency’s roadmap to Net Zero by 2050. We find across these scenarios that increasing EV adoption induces investment in new wind, solar, storage, and natural gas capacity, affecting power generation mix and emissions. The net effect of increasing EV adoption beyond our IRA base case is to increase power sector emissions by about 5 mtCO 2 eq per EV-year in 2026 (comparable to displaced gasoline vehicle combustion emissions), but this effect rapidly drops to annual levels below 1 mtCO 2 eq per EV-year by 2032 and continues below this level through 2050. Consequential effects of EV adoption vary regionally, with most regions primarily increasing wind or solar capacity and some regions primarily increasing natural gas capacity, even in 2050. Our national emissions estimates per EV-year are relatively robust to the level of EV adoption beyond our baseline and to variation in assumptions about power systems, EV behavior, and policy.

Science & Technology - Other Topics↗

Spatial and unobserved heterogeneity in consumer preferences for adoption of electric and hybrid vehicles: A Bayesian hierarchical modeling approach

The transition to low carbon vehicles known as alternative fuel vehicles (AFVs) is well underway. This transition has been motivated partly by consumer demand and partly by legislation such as the Zero Emission Vehicle mandate, which requires manufacturers to sell a certain percentage of their vehicles as AFVs. While the long-term adoption of AFVs (specifically, electric and hybrids) may take several years, there is a need to understand consumer preferences for AFV adoption and the pathways of AFV adoption from a national perspective. Therefore, this study sought to provide information about consumer preferences regarding AFV ownership while considering spatial and unobserved heterogeneity in consumer preferences, which can potentially impact societal transition to low carbon fueled vehicles. The 2017 National Household Travel Survey was used to calibrate Bayesian logit and hierarchical models. Here, the findings of these models reveal that higher gasoline prices contribute toward the adoption of battery electric vehicles. The results also reveal that the perceived disadvantages of AFVs for long commutes are the key barrier in wider adoption of AFVs. Interestingly, frequent use of the internet by consumers revealed a higher likelihood for purchase of hybrid vehicles. Furthermore, West Coast residents are observed to be a large portion of the early adopters and are more likely to purchase hybrids as compared to battery electric vehicles. The knowledge generated by this study has implications for making better informed decisions about AFV adoption and developing incentives to promote wider adoption of AFVs by overcoming their perceived disadvantages.

33 ADVANCED PROPULSION SYSTEMS↗