Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

A Field Demonstration of an Active Reservoir Pressure Management through Fluid Injection and Displaced Fluid Extraction at the Rock Springs Uplift a Priority Geologic CO 2 Storage Site for Wyoming

Here, the University of Wyoming is partnered with Los Alamos National Laboratory, Lawrence Livermore National Laboratory, Battelle, and Water system Specialists Inc. to carry out a DOE funded brine extraction storage test (BEST) project at the Rock Springs Uplift (RSU), southwest Wyoming. The BEST projects are envisioned using a two-phased approach. The initial phase is to predict and monitor the differential pressure and injected fluid movement, and manage changes in formation pressure, and to develop a test-bed for deploying treatment technologies for extracted brines.

58 GEOSCIENCES↗

Field validation of data-driven BSDF and peak extraction models for light-scattering fabric shades

Shading and daylighting systems affect cooling, heating, and lighting energy use by modulating solar radiation through the building façade. Characterizing shading systems holistically and accurately helps designers and engineers evaluate shading systems to achieve energy and non-energy performance goals. These complex fenestration systems can be modeled using Bidirectional Scattering Distribution Functions (BSDF), which map incident radiation to hemispherical distributions of outgoing radiation. Data-driven, tabulated BSDFs are derived from interpolated goniophotometer measured data, then sampled during the raytracing calculation. A peak extraction (PE) algorithm was developed to circumvent limits in BSDF angular resolution, where the specular peak is extracted during simulation by evaluating the BSDF in the through direction and surrounding region. The objective of this study was to validate this measurement and modeling workflow using field monitored data from a full scale testbed with eleven installed fabrics of different weaves, openness factors, and colors and assess the accuracy of the workflow under different adaptation and contrast conditions. Test conditions were limited to clear sky conditions with the sun in the field of view. Results showed that, for tensor tree datasets, vertical illuminance, solar luminance (2.5° apex), and daylight glare probability (DGP) were predicted to within a mean bias error (MBE) error of -456 lx (-12.3%), -3.46e5 (-38.4%), and -0.042 (-7.8%) when full PE occurred. With a binary classification of glare/ no glare, DGP was predicted accurately with a true positive rate of 0.98 and true negative rate of 1.0 using tensor tree data and less accurately with Klems BSDF data, particularly for cases of no glare. The workflow may be of insufficient accuracy to distinguish borderline performance between fabrics using the four-point glare scale, particularly under low adaptation, high contrast daylit conditions. Errors were due to reductions in peak shape and intensity across the BSDF interpolation and data reduction workflow. Future work is needed to better preserve measurement fidelity during interpolation and sampling, which in turn will improve PE performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Extraction of Hydrological Proximity Measures from DEMs using Parallel Processing

Land surface topography is one of the most important terrain properties which impact hydrological, geomorphological, and ecological processes active on a landscape. In our previous efforts to develop a soil depth model based upon topographic and land cover variables, we extracted a set of hydrological proximity measures (HPMs) from a Digital Elevation Model (DEM) as potential explanatory variables for soil depth. These HPMs may also have other, more general modeling applicability in hydrology, geomorphology and ecology, and so are described here from a general perspective. The HPMs we derived are variations of the distance up to ridge points (cells with no incoming flow) and variations of the distance down to stream points (cells with a contributing area greater than a threshold), following the flow path. These HPMs were computed using the D-infinity flow model that apportions flow between adjacent neighbors based on the direction of steepest downward slope on the eight triangular facets constructed in a 3 x 3 grid cell window using the center cell and each pair of adjacent neighboring grid cells in turn. The D-infinity model typically results in multiple flow paths between 2 points on the topography, with the result that distances may be computed as the minimum, maximum or average of the individual flow paths. In addition, each of the HPMs, are calculated vertically, horizontally, and along the land surface. Previously, these HPMs were calculated using recursive serial algorithms which suffered from stack overflow problems when used to process large datasets, limiting the size of DEMs that could be analyzed using that method to approximately 7000 x 7000 cells. To overcome this limitation, we developed a message passing interface (MPI) parallel approach for calculating these HPMs. The parallel algorithms of the HPMs spatially partition the input grid into stripes which are each assigned to separate processes for computation. Each of those processes then uses a queue data structure to order the processing of cells so that each cell is visited only once and the cross-process communications that are a standard part of MPI are handled in an efficient manner. This parallel approach allows analysis of much larger DEMs as compared to the serial recursive algorithms. In this paper, we present the definitions of the HPMs, the serial and parallel algorithms used in their extraction and their potential applications in hydrology, geomorphology and ecology.

54 ENVIRONMENTAL SCIENCES↗

Probabilistic cost estimation methods for treatment of water extracted during CO 2 storage and EOR

Extraction and treatment of in situ water can minimize risk for large-scale CO 2 injection in saline aquifers during carbon capture, utilization, and storage (CCUS), and for enhanced oil recovery (EOR). Additionally, treatment and reuse of oil and gas produced waters for hydraulic fracturing will conserve scarce fresh-water resources. Each treatment step, including transportation and waste disposal, generates economic and engineering challenges and risks; these steps should be factored into a comprehensive assessment. We expand the water treatment model (WTM) coupled within the sequestration system model CO 2 -PENS and use chemistry data from seawater and proposed injection sites in Wyoming, to demonstrate the relative importance of different water types on costs, including little-studied effects of organic pretreatment and transportation. We compare the WTM with an engineering water treatment model, utilizing energy costs and transportation costs. Specific energy costs for treatment of Madison Formation brackish and saline base cases and for seawater compared closely between the two models, with moderate differences for scenarios incorporating energy recovery. Transportation costs corresponded for all but low flow scenarios (<5000 m 3 /d). Some processes that have high costs (e.g., truck transportation) do not contribute the most variance to overall costs. Other factors, including feed-water temperature and water storage costs, are more significant contributors to variance. These results imply that the WTM can provide good estimates of treatment and related process costs (AACEI equivalent level 5, concept screening, or level 4, study or feasibility), and the complex relationships between processes when extracted waters are evaluated for use during CCUS and EOR site development.

20 FOSSIL-FUELED POWER PLANTS↗

Lignin extraction and upgrading using deep eutectic solvents

Deep eutectic solvents (DESs) are a class of green solvents exhibiting low vapor pressure, high thermal stability,low toxicity, and biodegradability. These features make them attractive solvents for lignocellulosic biomassprocessing, especially for lignin valorization. DESs not only solubilize lignin from lignocellulose biomass, butalso confer extracted lignin with properties favorable to its further upgrading. This review summarizes recentadvances in biomass fractionation using DESs for lignin extraction. It also covers lignin upgrading in DESs interms of depolymerization and functionalization. The challenges of tailoring lignin properties by DESs for differentvalorization routes are also discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Application of an orcinol-ferric chloride colorimetric assay in barley and wheat accessions for water-extractable and total arabinoxylan

Arabinoxylan is an important hemicellulose potentially affecting wheat baking qualities, barley malt quality, and may impart prebiotic benefits. Water-extractable (WEAX) and total arabinoxylan (TOAX) were characterized in 204 wheat and barley accessions, respectively, using an orcinol-ferric chloride assay. WEAX measurement accuracy was optimum when glucose concentration was greater than 12–13 times pentose concentration. The modified method removed enough excess glucose spectral absorbance to make the corrected and uncorrected lines different, but still significantly correlated (p = 0.009, R = 0.94). Mean WEAX (expressed as percentage WEAX of TOAX) for the wheat accessions was 15.90%, ranging from 8.82% to 24.87%, and for barley accessions WEAX the mean was 7.10%, and ranged from 2.98% to 13.86%. Conclusions are 1) the assay is useful for a breeding program because of its semi-high throughput design for the simultaneous analysis of 16 (WEAX) to 40 (TOAX) barley lines or 24 (WEAX) to 40 (TOAX) wheat lines, 2) the trichromatic measurement reduces the impact of glucose, and 3) the broad range of WEAX measured showed that barley and wheat accessions vary in their extractable and unextractable components.

59 BASIC BIOLOGICAL SCIENCES↗

Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage

We report the ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate source. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE “baskets,” we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using PCA and PLS on publicly available data to predict the extractability of hydrocarbons from shales

Prediction of hydrocarbon extraction from shale requires specialized knowledge of shale play characteristics and analysis to assess effective, economical, and sustainable implementation of oil and natural gas production. In this paper, we present a statistical approach that can be used as a preliminary investigation into the hydrocarbon resource potential of a shale play based on limited data. Statistical algorithms for Principal Component Analysis (PCA) and Partial Least Squares Regression (PLS) were used to determine if depositional environments and lithographic boundary characteristics of different plays allowed prediction of specific production parameters. This project characterizes Eagle Ford and Utica formations—two high-producing shale plays in the United States—and Banff/Exshaw and Colorado formations—two recently assessed shale plays in Alberta, Canada. Partial Least Squares Regression models were unable to model gas production parameters from predictor variables, highlighting the complexity of gas formations and the need for data on microscale petrophysical characteristics. In contrast, oil production parameters were better predicted, because bulk variables such as mineral composition appeared to correlate with oil location in mineral interfaces. As expected, a PLS model's predictive capabilities increased with specificity of data sets to particular regions of a shale play. Finally, this study indicates how PCA and PLS modeling could assist stakeholders to make preliminary decisions regarding hydrocarbon extraction, especially when limited to publicly available petrophysical data.

03 NATURAL GAS↗

Automatic information extraction from neutron radiography imaging to estimate axial fuel expansion in $\mathrm{EBR-II}$

Approximately 130,000 metal fuel pins were irradiated in the Experimental Breeder Reactor II (EBR-II) during its 30 years of operation to develop and characterize existing and prospective fuels. For many of the metal fuel irradiation experiments, neutron radiography imaging was performed to characterize fuel behavior, like fuel swelling. However, due to the lack of technology or resources, many of the images have not been processed or were processed manually through visual examination. This paper represents first-attempt to develop an image processing algorithm capable of automatically extracting information regarding the degree of fuel swelling from neutron radiography imaging. The algorithm was applied to 120 images of three different metallic fuel pin compositions—U-10Zr, U-8Pu-10Zr, and U-19Pu-10Zr. The algorithm performs operations of image intensity adjustment, image binarization, region finding, and labeling to extract information about fuel swelling. The average growth for U-10Zr was found to be 8.49% with 95% Confidence Interval (CI) [8.33 –8.66%], for U-8Pu-10Zr — 7.50% with 95% CI [7.23 – 7.78%], and for U-19Pu-10Zr — 3.15%, with 95% CI [2.40 – 3.91%]. The results obtained by applying this automatic image processing algorithm are consistent with previously reported studies of the same types of fuels. The automatic image processing algorithm will be expanded to include thousands of available neutron radiography images and different types of fuels to investigate empirical dependencies of fuel swelling, which can be subsequently applied to advanced fuel modeling. Results from this study can later be compared to BISON simulations to further benchmark modeling efforts and develop assessment cases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radiation induced amorphization of carbides in additively manufactured and conventional ferritic-martensitic steels: In-situ experiments on extraction replicas

In-situ irradiations using 1 MeV Kr 2+ ions in a transmission electron microscope were performed on extraction replica samples containing M 23 C 6 carbides and MX carbonitrides from two ferritic-martensitic (FM) steels: (i) 9%Cr-1%W-TaV based Eurofer97 and (ii) 9%Cr-1%Mo-VNb (all in wt.%) based additively manufactured (AM) Grade91 steel. The irradiations were performed between 100 and 773 K up to a maximum dose of ~2.4 displacements per atom (dpa). The M 23 C 6 carbides are highly susceptible to radiation induced amorphization (RIA), while the MX type nanoprecipitates are highly amorphization resistant across the entire irradiation temperature range. Between 100 and 423 K, RIA of M 23 C 6 carbides occurs very rapidly with critical amorphization doses ranging between ~0.35 and 0.9 dpa, increasing to higher doses at 573 K. Complete amorphization of the M 23 C 6 carbides up to doses of ~2.4 dpa is not possible at 773 K under the present irradiation conditions. The critical amorphization dose of M 23 C 6 carbides increases nearly exponentially with irradiation temperature. The critical temperature for the crystalline-to-amorphous phase transformation (T c→a ) of M 23 C 6 carbides irradiated as replica samples, i.e. without the surrounding metal matrix, was estimated to be ~812 K. Comparing the present results with neutron irradiation data on bulk samples reveals a decrease in the critical amorphization dose for M 23 C 6 and an increase of T c→a , highlighting the effect of dose rate on the amorphization behavior that is qualitatively consistent with literature on other non-metals. Changes in the minor chemistry of M 23 C 6 , such as presence or absence of W, V, Nb, Mo, seems to have little effect on the amorphization behavior. Here, in-situ irradiations on extraction replica samples provide a novel pathway to explore radiation tolerance of nanoprecipitates in nuclear structural materials

36 MATERIALS SCIENCE↗

Extracting electron backscattering coefficients from backscattered electron micrographs

Electron backscattering micrographs possess the so-called Z-contrast, carrying information about the chemical compositions of phases present in microstructures. The intensity at a particular point in the backscattered electron micrograph is proportional to the signal detected at a corresponding point in the scan raster, which is, in turn, proportional to the electron backscattering coefficient of a phase at that point. This article introduces a simple method for extracting the electron backscattering coefficients of phases present in the microstructure, from the backscattered electron micrographs. This method is able to convert the micrograph's greyscale to the backscattering-coefficient-scale. The prerequisite involves the known backscattering coefficients for two phases in the micrograph. In this way, backscattering coefficients of other phases can be determined. The method is unable to determine the chemical compositions of phases or the presence of an element only from analysing the backscattered electron micrograph. Nevertheless, this method was found to be very powerful when combined with energy dispersive spectroscopy, and the calculations of backscattering coefficients. - Research Highlights: {yields}A simple method for extracting the electron backscattering coefficients {yields}The prerequisite is known backscattering coefficients for two phases {yields}The information is complementary to the EDS-results. {yields}This method is especially useful when a phase contains a light element (H, Li, Be, and B)

36 MATERIALS SCIENCE↗

Nanocrystalline spinel ferrite (MFe{sub 2}O{sub 4}, M = Ni, Co, Mn, Mg, Zn) powders prepared by a simple aloe vera plant-extracted solution hydrothermal route

Graphical abstract: This figure shows the specific magnetization curves of the as-prepared MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders obtained from room temperature VSM measurement. These curves are typical for a soft magnetic material and indicate hysteresis ferromagnetism in the field ranges of ±500 Oe, ±1000 Oe, and ±2000 Oe for the CoFe{sub 2}O{sub 4}, MgFe{sub 2}O{sub 4} and MnFe{sub 2}O{sub 4} respectively, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} show a superparamagnetic behavior. Highlights: ► Nanocrystalline MFe{sub 2}O{sub 4} powders were synthesized by a novel hydrothermal method. ► Metal acetylacetonates and aloe vera plant-extracted solution are used. ► This biosynthetic route is very simple and provides high-yield oxide nanomaterials. ► XRD and TEM results indicate that the prepared samples have only spinel structure. ► The maximum M{sub s} of 68.9 emu/g at 10 kOe were observed for the samples of MnFe{sub 2}O{sub 4}. - Abstract: Nanocrystalline spinel ferrite MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders were synthesized by a novel hydrothermal method using Fe(acac){sub 3}, M(acac){sub 3} (M = Ni, Co, Mn, Mg, Zn) and aloe vera plant extracted solution. The X-ray diffraction and selected-area electron diffraction results indicate that the synthesized nanocrystalline have only spinel structure without the presence of other phase impurities. The crystal structure and morphology of the spinel ferrite powders, as revealed by TEM, show that the NiFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} samples contain nanoparticles, whereas the MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples consist of many nanoplatelets and nanoparticles. Interestingly, the ZnFe{sub 2}O{sub 4} sample contains plate-like structure of networked nanocrystalline particles. Room temperature magnetization results show a ferromagnetic behavior of the CoFe{sub 2}O{sub 4}, MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} exhibit a superparamagnetic behavior.

36 MATERIALS SCIENCE↗

Functional chitosan-based grapefruit seed extract composite films for applications in food packaging technology

Highlights: • Chitosan-based grapefruit seed extract (GFSE) films were solution casted. • GFSE was uniformly dispersed within all chitosan film matrices. • All chitosan-based composite films showed remarkable transparency. • Increasing amounts of GFSE incorporated increased the elongation at break of films. • Chitosan-based GFSE composite films inhibited the proliferation of fungal growth. - Abstract: Chitosan-based composite films with different amounts of grapefruit seed extract (GFSE) (0.5, 1.0 and 1.5% v/v) were fabricated via solution casting technique. Experimental results showed that GFSE was uniformly dispersed within all chitosan film matrices. The presence of GFSE made the films more amorphous and tensile strength decreased, while elongation at break values increased as GFSE content increased. Results from the measurement of light transmission revealed that increasing amounts of GFSE (from 0.5 to 1.5% v/v) did not affect transparency of the films. Furthermore, packaging of bread samples with chitosan-based GFSE composite films inhibited the proliferation of fungal growth as compared to control samples. Hence, chitosan-based GFSE composite films have the potential to be a useful material in the area of food technology.

36 MATERIALS SCIENCE↗

Biosynthesis of the palladium/sodium borosilicate nanocomposite using Euphorbia milii extract and evaluation of its catalytic activity in the reduction of chromium(VI), nitro compounds and organic dyes

Highlights: • Green synthesis of Pd/sodium borosilicate nanocomposite using Euphorbia milii aqueous extract. • Characterization of catalyst by FT-IR, XRD, FESEM, EDS, TEM and elemental mapping. • Catalytic reduction of Cr(VI), 2,4-DNPH, 4-NP, CR, MO and MB by Pd/sodium borosilicate nanocomposite. - Abstract: For the first time, a green method is developed to prepare palladium/sodium borosilicate nanocomposite by using aqueous extract of the leaves of Euphorbia milii as bioreducing and stabilizing agent. The immobilization of Pd NPs on the surface of the sodium borosilicate glass was established by several instrumental analysis including X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), EDS elemental dot maps and transmission electron microscopy (TEM). The green synthesized nanocatalyst exhibited excellent performance in the reduction of the chromium (VI) (Cr(VI)), nitro compounds such as 2,4-dinitrophenylhydrazine (2,4-DNPH) and 4-nitrophenol (4-NP) and some organic dyes containing Congo red (CR), Methyl orange (MO), and Methylene blue (MB). The biosynthesized heterogeneous catalyst was easily recovered and reused at least in 5 consecutive reactions with no losing of its performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Interaction of the cesium cation with calix[4]arene-bis(t-octylbenzo-18-crown-6): Extraction and DFT study

From extraction experiments and c-activity measurements, the extraction constant corresponding to the equilibrium Cs+ (aq) + I (aq) + 1 (org),1Cs+ (org) + I (org) taking place in the two-phase water-phenyltrifluoromethyl sulfone (abbrev. FS 13) system (1 = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, org = FS 13 phase) was evaluated as logKex (1Cs+, I) = 2.1 0.1. Further, the stability constant of the 1Cs+ complex in FS 13 saturated with water was calculated for a temperature of 25 C: log borg (1Cs+) = 9.9 0.1. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1Cs+ was derived. In the resulting 1Cs+ complex, the central cation Cs+ is bound by eight bond interactions to six oxygen atoms of the respective 18-crown-6 moiety and to two carbons of the corresponding two benzene rings of the parent ligand 1 via cation p interaction.

cesium cation↗

Structural characterization of sugarcane lignins extracted from different protic ionic liquid pretreatments

Previous studies based on protic ionic liquids have shown them to be effective for extracting lignins from biomass. Moreover, ILs synthesized with amine cations can promote the insertion of nitrogen into lignin, favoring its valorization for industrial applications. Here, lignins extracted from sugarcane bagasse by eight different PILs were analyzed. Several techniques of characterization were employed (2D HSQC NMR, 31P NMR, GPC, Py-GC/MS, TGA, FTIR, and elemental analysis), seeking a deeper understanding of lignin structure post-PILS treatment. In particular, lignin obtained with acetate and lactate anions with monoethanolamonium cations showed similar structural compositions. Lignins obtained from ethylenediamonium cation combined anions acetate and lactate exhibited relatively higher molecular weights compared to the other lignins studied. The elemental analysis of these lignins further revealed the presence of nitrogen in their structures, suggesting that amination occurred. In this work we used PILs not yet reported in the literature for this purpose, and consequently obtained lignins with specific structures. Overall, our results demonstrated that depending on the PILs used, lignins with distinct properties could be obtained which might be used for value-added applications. This work covered new advances in elucidation of lignin chemical structure and opened a new path for lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

U.S. lithium resources from geothermal and extraction feasibility

As the demand for electric vehicles (EVs) increases, demand for lithium (Li) is expected to grow over the coming decade. To satisfy the demand for rechargeable batteries, it is imperative to devise solutions for sufficient Li production. Additionally, even though commercial Li currently comes from conventional saline salar brine and spodumene ore extractions, efforts to retrieve Li from geothermal brines are increasing in popularity. In this paper, we evaluate the United States’ potential to supply Li from geothermal brines using Systems Dynamics modeling. The main goals are to assess (1) the viability of US Li supply from geothermal brines and (2) the potential supply chain impact of extracting Li from this source. Results show that Li supply from geothermal brines could (1) reach around 4% to 8% of total US Li supply and (2) be economically viable.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Potential uranium supply from phosphoric acid: A U.S. analysis comparing solvent extraction and Ion exchange recovery

Phosphate rock contains significant amounts of uranium, although in low concentrations. Recovery of uranium as a by-product from phosphoric acid, an intermediate product produced during the recovery of phosphorus from phosphate rock, is not unprecedented. Phosphoric acid plants ceased to produce uranium as a by-product in the early 1990s with the fall of uranium prices. In the last decade, this topic has regained attention due to higher uranium prices and expected increase in demand for uranium. Our study revisits the topic and estimates how much uranium might be recoverable from current phosphoric acid production in the United States and what the associated costs might be considering two different recovery processes: solvent extraction and ion exchange. Based on U.S. phosphoric acid production in 2014, 5.5 million pounds of U 3 O 8 could have been recovered, more than domestic U.S. mine production of uranium in the same year. Annualized costs for a hypothetical uranium recovery plant are US$48-66 per pound U 3 O 8 for solvent extraction, the process used historically in the United States to recover uranium from phosphoric acid. For ion exchange, not yet proven at a commercial scale for uranium recovery, the estimated costs are US$33-54 per pound U 3 O 8 . Our results suggest that it is technically possible for the United States to recover significant quantities of uranium from current phosphoric acid production. And for this type of uranium production to be economically attractive on a large scale, either recovery costs must fall or uranium prices rise.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗