Nanomaterials Synthesis Discovery via Parallel Electrochemical Deposition
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “Electrode materials”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fabrication and Characterization of Cross-Linked Phenyl-Acrylate-Based Ion Exchange Membranes and Performance in a Direct Urea Fuel Cell
Ion exchange membranes (IEMs) are crucial for direct fuel cells, including direct methanol and direct urea fuel cells (DUFCs). While commercially available IEMs (e.g., FAA-3-50) show decent power density in direct fuel cells, they experience considerable methanol or urea crossover, reducing device performance and motivating design of IEMs that suppress fuel crossover. Here, we prepare cross-linked IEMs with high mechanical toughness utilizing a cross-linker (methylenebis(acrylamide)), hydrophobic monomer (phenyl acrylate (PA) or phenyl methacrylate (PMA)), and charged monomer (2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) for cation exchange or methacroylcholine chloride (MACC) for anion exchange). To validate these membranes in a fuel cell application, we perform DUFC experiments utilizing a PA/MACC AEM and observe good power density compared to FAA-3-50. Furthermore, to understand the role of urea crossover in DUFC performance, permeabilities of both membranes to urea are measured by diffusion cells with in situ ATR-FTIR spectroscopy, where our PA/MACC exhibited lower urea permeability than FAA-3-50.
36 MATERIALS SCIENCE↗
Electrochemically Assisted Single Crystal Growth of Reduced Preyssler Polyoxometalates Decorated with M 2+ ( M = Co, Ni) and Cubane–Like Ni 4 O 4 Units
Polyoxometalates (POMs) are of great interest to the scientific community, and their reduction and nucleation have been well–established by multi–step techniques. The present study develops an electrochemical approach for simultaneous reduction and nucleation of polyoxometalate–containing solids. Herein we report crystal growth of reduced Preyssler polyoxotungstate–based (anionic formula [NaP 5 W 30 O 110 ] 14– ) new crystalline solids made of Preyssler anions interlinked by Co 2+ and Ni 2+ ions. Crystal nucleation and in situ reduction were achieved at room temperature using a two silver wire electrode setup in various aqueous solutions under constant applied potentials. The POM material was deposited on the cathode, and its structure was characterized by X–ray diffraction techniques. The primary structure type observed involves POMs decorated by disordered Co 2+ /Ni 2+ octahedra and fused into 1–D pillars by additional Co 2+ /Ni 2+ octahedra. Additionally, a secondary phase was observed in the Ni–based reactions, where reduced Preyssler anions are decorated by Ni 4 O 4 cubane–like units. To understand the electrochemical process, polarization curves of the electrolyte solutions are presented, suggesting an applied potential best suited for crystal growth. The work highlights the effectiveness of an electrochemical pathway where nucleation and simultaneous reduction of POMs can make novel reduced POM solids.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
New Perspective on Electron Transfer through Molecules
Motivated by experiments which display unusual length and temperature effects for electron transfer in the nanometer length regime, we propose a new approach for describing long range electron transfer (ET) processes through molecules. We posit that the electron reorganization in the molecules (e.g., the electronic polarization of a macromolecule or organic film by an applied electric potential, or the injected charge generating a dipole moment) should be included in the description. We numerically solve a one-dimensional model for the electron transport, which includes electron-electron interactions explicitly; and we show that it generates a power law distance dependence for electron similar to that observed in experiments. The model does not include vibrations explicitly and should be consistent with the weak temperature dependences observed experimentally. This approach emphasizes the need to treat the electronic changes in the molecule(s) more explicitly to understand the behavior.
36 MATERIALS SCIENCE↗
Imaging the Phase Transformation in Single Particles of Lithium Titanate Anode for Lithium-ion Batteries
Lithium uptake and release in lithium titanate (LTO) anode materials during a discharge and charge cycle is one of the fundamental processes of a Lithium-ion battery (LIB), still not fully understood at the microscopic level.During discharge cycle, LTO undergoes a phase transformation between Li 4 Ti 5 O 12 and Li 7 Ti 5 O 12 states within a cubic crystal lattice. To reveal the details of the microscopic mechanism,it is necessary to track the sequence of phase transformation sat different discharge/charge states under operating conditions.Here we use in-situ Bragg Coherent Diffraction Imaging (BCDI) and in-situ X-ray diffraction (XRD) experiments to examine the lithium insertion-induced materials phase transformation within a single LTO particle anda bulk battery analogue,respectively. BCDI analysis from (111) Bragg peak, shows the two-phase transformation manifesting as a distinct image phase modulation within a single LTO nanoparticle occurring in the middle of the discharge region then subsiding towards the end of the discharge cycle. We observe the biggest phase variation at the two-phase stage,indicating the formation of phase domains of 200 nm in size during the discharge process. Additionally, we also observe a lattice contraction of >0.2% in a single LTO nanoparticle at the (400) Bragg peak measurement, larger than that in the corresponding bulk material. Our observation of this phase transformation at a single particle level has implications for the understanding of the microscopic/mesoscale picture of the phase transformation in anode and cathode LIBs materials.
25 ENERGY STORAGE↗
Operando Calorimetry Investigation of Particle Size Effects on Heat Generation in Wadsley–Roth (W 0.2 V 0.8 ) 3 O 7 -Based Electrodes
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effective Lithium Passivation through Graphite Coating for Lithium Metal Batteries
Not Available
25 ENERGY STORAGE↗
Low-Cost Transformation of Biomass-Derived Carbon to High-Performing Nano-graphite via Low-Temperature Electrochemical Graphitization
Graphite, an essential component of energy storage devices, is traditionally synthesized via an energy-intensive thermal process (Acheson process) at ~3300 K. However, the battery performance of such graphite is abysmal under fast-charging conditions, which is deemed essential for the propulsion of electric vehicles to the next level. Herein, a low-temperature electrochemical transformation approach has been demonstrated to afford a highly crystalline nano-graphite with the capability of tuning interlayer spacing to enhance the lithium diffusion kinetics in molten salts at 850 °C. The essence of our strategy lies in the effective electrocatalytic transformation of carbon to graphite at a lower temperature that could significantly increase the energy savings, reduce the cost, shorten the synthesis time, and replace the traditional graphite synthesis. The resulting graphite exhibits high purity, crystallinity, a high degree of graphitization, and a nanoflake architecture that all ensure fast lithium diffusion kinetics (~2.0 × 10 –8 cm2 s –1 ) through its nanosheet. Such unique features enable outstanding electrochemical performance (~200 mA h g –1 at 5C for 1000 cycles, 1C = 372 mA g –1 ) as a fast-charging anode for lithium-ion batteries. Overall, this finding paves the way to make high energy-density fast-charging batteries that could boost electromobility.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quantitative Analysis of Origin of Lithium Inventory Loss and Interface Evolution over Extended Fast Charge Aging in Li Ion Batteries
During the extreme fast charging (XFC) of lithium-ion batteries, lithium inventory loss (LLI) and reaction mechanisms at the anode/electrolyte interface are crucial factors in performance and safety. Determining the causes of LLI and quantifying them remain an essential challenge. We present mechanistic research on the evolution and interactions of aging mechanisms at the anode/electrolyte interface. We used NMC 532 /graphite pouch cells charged at rates of 1, 6, and 9 C up to 1000 cycles for our investigation. The cell components were characterized after cycling using electrochemical measurements, inductively coupled plasma optical emission spectroscopy, 7 Li solid-state nuclear magnetic resonance spectroscopy, and high-performance liquid chromatography/mass spectrometry. The results indicate that cells charged at 1 C exhibit no Li plating, and the increase of SEI thickness is the dominant source of the Li loss. In contrast, Li loss in cells charged at 9 C is related to the formation of the metallic plating layers (42%) the SEI layer (38.1%) and irreversible intercalation into the bulk graphite (19%). XPS analysis suggests that the charging rate has little influence on the evolution of SEI composition. The interactions between competing aging mechanisms were evaluated by a correlation analysis. In conclusion, the quantitative method established in this work provides a comprehensive analytical framework for understanding the synergistic coupling of anodic degradation mechanisms, forecasting SEI failure scenarios, and assessing the XFC lithium-ion battery capacity fade.
25 ENERGY STORAGE↗
Tailored Ni(OH) 2 /CuCo/Ni(OH) 2 Composite Interfaces for Efficient and Durable Urea Oxidation Reaction
Not Available
36 MATERIALS SCIENCE↗
Electrochemical Oxidation of Lignin and Waste Plastic
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
The effect of nanoparticle size on calendar and cycle lifetimes of silicon anode lithium-ion batteries
Silicon anodes offer high energy density but face challenges like volume expansion and reactivity. This study shows ultra-small nanoparticles (∼6 nm) improve cycle life without reducing calendar life, as dense electrodes limit exposed surface area.
25 ENERGY STORAGE↗
Analytical model of low and high ablation regimes in carbon arcs
Graphite ablation by an electric arc or a laser/solar flux is widely used for the synthesis of carbon nanomaterials. Previously, it was observed in multiple arc experiments that the ablation rate is a strong nonlinear function of the arc current and it drastically increases at some threshold current. As such, we developed an analytical model explaining this transition in the rate of ablation by an electric arc or a laser/solar flux. The model not only explains the observations but can also accurately predict the experimentally observed ablation rates. The model takes into account redeposition of carbon back to the ablated surface, which is the key process responsible for the observed effects.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Hierarchical Porosity in Electrospun Capacitive Deionization Electrodes
Explore the source record for details and available documents.
Material Science↗
Enhanced microfabrication using electrochemical techniques
A method is provided for subtractively processing a layer of etchable material formed over an electrically conductive surface region of a workpiece. The workpiece is immersed in a liquid solution, generally but not exclusively a conductive solution, that comprises an etchant for the etchable material, so that etching of the etchable material is initiated. An electric circuit is connected to include a control electrode, a reference electrode, and the electrically conductive surface region of the workpiece. The electric circuit is used to monitor the development process dynamically at each of a plurality of intervals during the etching. The etching is terminated when the electrochemical signal satisfies a criterion indicating that the etching is complete.
Arrington, Christian↗
To Pave the Way for Large-Scale Electrode Processing of Moisture-Sensitive Ni-Rich Cathodes
High-capacity Ni-rich cathode such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) has a great potential to enable high energy lithium-ion batteries (LIBs) for long-range electrical vehicles. However, the utilization of NMC 811 in large-scale application is still challenging. While many published papers on NMC811 focus on materials modification, the moisture sensitivity of NMC811 and its implications in storage and large-scale electrode coating are not well explored, not to mention how to overcome those challenges for industry application. This work discusses the key parameters impacting the rheological properties of NMC811 slurries and their correlations to the properties of dried electrodes. Effective solutions are proposed to address the gelation issue of NMC811 slurry during large-scale coating to hopefully inspire more effective and practical approaches to tackle the grand challenges in electrochemical energy storage.
25 ENERGY STORAGE↗
The Role of Electrolyte Composition in Enabling Li Metal‐Iron Fluoride Full‐Cell Batteries
Abstract FeF 3 conversion cathodes, paired with Li metal, are promising for use in next‐generation secondary batteries and offer a remarkable theoretical energy density of 1947 Wh kg −1 compared to 690 Wh kg −1 for LiNi 0.5 Mn 1.5 O 4 ; however, many successful studies on FeF 3 cathodes are performed in cells with a large (>90‐fold) excess of Li that disguises the effects of tested variables on the anode and decreases the practical energy density of the battery. Herein, it is demonstrated that for full‐cell compatibility, the electrolyte must produce both a protective solid‐electrolyte interphase and cathode‐electrolyte interphase and that an electrolyte composed of 1:1.3:3 (m/m) LiFSI, 1,2‐dimethoxyethane, and 1,1,2,2‐tetrafluoroethyl‐2,2,3,3‐tetrafluoropropyl ether fulfills both these requirements. This work demonstrates the importance of verifying electrode level solutions on the full‐cell level when developing new battery chemistries and represents the first full cell demonstration of a Li/FeF 3 cell, with both limited Li and high capacity FeF 3 utilization.
25 ENERGY STORAGE↗
Modifying Interface Solvation and Oxygen Reduction Electrocatalysis with Hydrophobic Species
Ionic liquid interlayers improve the oxygen reduction reaction (ORR) kinetics on bulk and nanostructured catalysts for both Pt and alloyed-Pt materials. Despite the demonstrated performance enhancement at the half-cell and membrane electrode assembly level, the mechanism of the improvement is not fully understood. In this work, we combine single-crystal experiments with microkinetic modeling to uncover the origin of the ORR kinetic improvement on Pt(111) in the presence of ionic liquids and hydrophobic cations. With the incorporation of a modified Frumkin isotherm, our model accurately simulates the disorder–order transition observed in hydroxyl and bisulfate adsorption on Pt(111) under acidic conditions. Voltametric analysis shows that ionic liquids impact solvation to break so-called scaling relations between the adsorption strength of OH ad and O ad , but these effects have little impact on ORR activity. Instead, destabilized OH ad reduces the overall hydroxyl (spectator) coverage, resulting in higher availability of active sites.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗