Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ejecta”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

The geology and petrology of the Apollo 11 landing site

Geochemical and petrologic data indicate that the 73 Apollo 11 basalts thus far identified can be divided into five petrologic groups (A, B1, B2, B3, D) which must represent at least five separate igneous cooling units. These five igneous bodies range in age from 3.90 b.y. to 3.60 b.y. Photogeologic studies indicate that three mare units are present, and that the lunar module set down on the oldest of the three. The exposure age data suggest that the high-K flow is the surficial rock type at the landing area, and is, therefore, probably the oldest of the three mare units. By examining the size frequency distribution and the inferred cooling rates of the individual samples, it is possible to calculate the formation thicknesses within the 30-m-deep West Crater. This suggests that A = 9 m, B1 = 2 m (and may be an ejecta blanket), B2 is equal to or greater than 8 m, and B3 = 6 m.

Beaty, D. W.↗

Redistribution of volatiles during lunar metamorphism

Thermal release profiles of Pb, Zn, and Cd in sample 66095 (highly shocked breccia with melt rock matrix) showed that these volatiles were mostly present on the surface of the grains. Zn in rusty grains from 66095 was also mostly surface Zn, probably from sphalerite in grain boundaries and cracks. Simulation experiments of volatile transfer showed that Fe, FeCl2, iron phosphide, and troilite (FeS) can be produced and transported during subsolidus reactions. These results suggest that volatiles, rust, schreibersite, and possible siderophiles which are observed in lunar highland samples might have been redistributed during disequilibrium thermal metamorphism in hot ejecta blankets, and were not necessarily introduced by volcanic activity or meteoritic addition.

Cirlin, E. H.↗

Lunar core 15010/11 - Grain size, petrology, and implications for regolith dynamics

Petrographic observations of six samples from various depths show that core 15010/11 is relatively homogeneous and consists mostly of basalt fragments and minerals derived from basalts. However, it also contains an appreciable highland component nearly equally distributed among the fine-grained fraction, dark matrix breccia and identifiable highland grains, and agglutinates. Grain size data and agglutinates show that this core is not mature and does not contain a well developed reworking profile. The unusual properties of the core are thought to be a direct result of its close proximity to the rim of Hadley Rille. This location favors relatively rapid regolith erosion into the rille, produces a thin regolith, and provides an abundant supply of bedrock-derived ejecta.

Mckay, D. S.↗

Impact cratering in viscous targets - Laboratory experiments

To determine the effects of target yield strength and viscosity on the formation and morphology of Martian multilobed, slosh and rampart-type impact craters, 75 experiments in which target properties and impact energies were varied were carried out for high-speed motion picture observation in keeping with the following sequence: (1) projectile initial impact; (2) crater excavation and rise of ejecta plume; (3) formation of a transient central mound which generates a surge of material upon collapse that can partly override the plume deposit; and (4) oscillation of the central mound with progressively smaller surges of material leaving the crater. A dimensional analysis of the experimental results indicates that the dimensions of the central mound are proportional to (1) the energy of the impacting projectile and (2) to the inverse of both the yield strength and viscosity of the target material, and it is determined that extrapolation of these results to large Martian craters requires an effective surface layer viscosity of less than 10 to the 10th poise. These results may also be applicable to impacts on outer planet satellites composed of ice-silicate mixtures.

Greeley, R.↗

Cratering flow fields - Implications for the excavation and transient expansion stages of crater formation

Theoretical depths, volumes of excavation, hinge radii, ejection angles and transient structural rim uplifts are calculated, for comparison with experimental and field data from impact and explosion craters, by means of a Maxwell Z-model cratering flow field originating at non-zero depths-of-burst. It is found that the formation of a hinge, about which the coherent ejecta flap rotates at the rim of the transient crater, divides material in the flow field into ejected and downward and outward-driven portions. Ejected material originates from an excavation cavity whose geometry is distinct from that of the transient crater. The shallow depths of excavation both observed in impact and explosion craters and predicted by the Z-model flow fields imply that thickness estimates of such lunar geologic units as the maria basalts, which are determined by assuming that excavation depths are similar to (1) final or (2) transient crater depths, must be reduced by factors of two to three respectively. It is concluded that lunar basin excavation cavities exhibit proportional growth, and have maximum depths of excavation near 0.1 the diameter of the basin transient crater.

Croft, S. K.↗

Origin of bright ring-shaped craters in radar images of Venus

Radar images of the Venusian surface taken at the Arecibo Observatory are examined in the context of recent study of the radar appearance of lunar craters to provide insight into the formation and evolution of Venusian features and to propose the thesis that bright ring-shaped features contain information about the rate at which Venus is being modified by depositional or erosional processes. Radar crater signatures are analyzed by crater floor and interior properties and by properties of ejecta deposits. Morphological comparisons with radar images of lunar craters are made, as well as morphometric comparisons with lunar radar crater haloes. The populations of radar bright craters on the moon and Venus is analyzed using a Monte Carlo simulation. It is concluded that the bright ring crater population does not resemble an impact crater production population.

Cutts, J. A.↗

Gamma ray lines from buried supernovae

An investigation is conducted concerning the possibility that supernovae (SN), located in dense interstellar clouds, might become the sources of gamma ray lines. The SN progenitor, in such a case, has to be an O or B star so that its evolutionary lifetime is short, and an explosion inside the cloud is still possible. It is shown that, in principle, a measurement of the abundances in the ejecta is possible. Attention is given to the characteristics of a model, the expected luminosity of gamma-ray lines, and the study of specific numerical examples for testing the feasibility of the considered mechanism. On the basis of the obtained results, it is concluded that gamma-ray line production by collisional excitation in confined supernovae remnants may be quite important.

Morfill, G. E.↗

The Apollo 15 regolith - Comparative petrology of drive tube 15010/15011 and drill core section 15003

Two Apollo 15 regolith cores - double drive-tube 15010/15011 and deep drill core section 15003 - were compared. The drive tube was taken from near the edge of Hadley Rille within the mare region and the drill core was taken from the landing site, approximately the same distance as the drive tube from the Apennine Front. Optical modes were done on the two cores, each of which was divided into three stratigraphic units defined by minor differences in grain size and modal abundances. Electron microprobe data were collected on the mineral and glass fragments within each unit. Fused-soil-free bulk chemistries were calculated for each unit by modal recombination, using our modal data and average compositional and density data for soil components. It is found that the drive tube and drill core section are fairly homogeneous units both chemically and modally. Both soils are submature to immature. There are, however, significant differences between the cores. The drill core shows significant enrichments of highland lithic-fragments and highland-derived minerals and glasses relative to the drive tube. These differences are attributed to the fresh nature of the drive tube soil whose major source material is mare basalt ejecta from the shallow bedrock.

Walker, R. J.↗

Remote sensing studies of lunar dark-halo impact craters - Preliminary results and implications for early volcanism

A summary of the nature and origin of lunar dark-halo craters is presented. New remote sensing data for dark-haloed impact craters were obtained and interpreted. A variety of spectral, thermal, radar, and photogeologic data are presented which confirm the hypothesis that Copernicus H crater excavated mare basalt from beneath lighter deposits emplaced by the Copernicus impact event. Multispectral imagery suggests that analogous impact re-exposure of basaltic material on the ejecta blankets of other large Copernican and Eratosthenian craters resulted in the formation of other dark-halo craters. Preliminary analyses of near-infrared spectra of dark-haloed impact craters in the Schickard-Schiller region are consistent with the hypothesis that basaltic material was excavated from beneath light plains. These light plains may have been emplaced as a result of the Orientale impact event. Additional evidence is presented which suggests that both pre- and post-Orientale volcanic activity was more prevalent in this region than has previously been recognized.

Hawke, B. R.↗

Thorium concentrations in the lunar surface. V - Deconvolution of the central highlands region

The distribution of thorium in the lunar central highlands measured from orbit by the Apollo 16 gamma-ray spectrometer is subjected to a deconvolution analysis to yield improved spatial resolution and contrast. Use of two overlapping data fields for complete coverage also provides a demonstration of the technique's ability to model concentrations several degrees beyond the data track. Deconvolution reveals an association between Th concentration and the Kant Plateau, Descartes Mountain and Cayley plains surface formations. The Kant Plateau and Descartes Mountains model with Th less than 1 part per million, which is typical of farside highlands but is infrequently seen over any other nearside highland portions of the Apollo 15 and 16 ground tracks. It is noted that, if the Cayley plains are the result of basin-forming impact ejecta, the distribution of Th concentration with longitude supports an origin from the Imbrium basin rather than the Nectaris or Orientale basins. Nectaris basin materials are found to have a Th concentration similar to that of the Descartes Mountains, evidence that the latter may have been emplaced as Nectaris basin impact deposits.

Metzger, A. E.↗

Regional chemical setting of the Apollo 16 landing site and the importance of the Kant Plateau

Orbital X-ray data from the Apollo 16 region indicate that physiographic units identified before the lunar mission can be classified as chemical units as well. The Descartes Mountains, however, appear to be an extension of the Kant Plateau composition that is unusually anorthositic and resembles farside terra. The Cayley Plains have closer affinities to basaltic materials than terra materials, physically, spectrally and chemically. The Theophilus impact, 330 km east of the landing site, excavated magnesium-rich basalts from below less-magnesian flows in Mare Nectaris; but, mafic ejecta was substantially blocked from the Apollo 16 site by the Kant Plateau that rises 5 km above the level of the mare. Apollo 16 soil samples from stations selected to collect either Descartes Mountains material or Cayley Plains material were surprisingly similar. However, they do, indeed, show the chemical trends indicative of the two units as defined by the orbiting geochemistry detectors. The Kant Plateau and Descartes Mountains material may be among the rare nearside examples of a plagioclase-rich cumulate of the primordial magma ocean.

Andre, C. G.↗

SNC meteorites - Igneous rocks from Mars

It is argued that SNC (shergottite, nakhlite, chassignite) meteorites are ejecta from Mars. The mineralogy and chemistry of these objects is discussed, including rare earth element content, potassium/uranium ratios, oxidation state, oxygen isotopes, ages and isotopic evolution, magnetism, shock and texture. The possibility of SNC's deriving from Mercury, Venus, earth, moon, or a eucrite parent body is argued against. Mercury is too volatile-poor and anhydrous, Venus's atmosphere too thick and hot and its gravitational field too large, earth's oxygen isotope content too different from that of SNC's, the moon too different isotopically and chemically, and the ages of eucrites too different. Models suggest that SNC's could have escaped from Mars's gravitational field, and their composition supports Martian origin. Statistically, they could have reached the earth within their measured shock ages. Objections to the hypothesis are also discussed.

Wood, C. A.↗

Some key issues in isotopic anomalies - Astrophysical history and aggregation

Astrophysical history, particularly that period extending from stellar nucleosynthesis events to the formation of meteorites, is discussed as the key element for the understanding of isotopic anomalies in meteorites. The bulk homogeneity of the interstellar medium is considered, and it is argued that, despite the presence of spatial inhomogeneities due to different nucleosynthesis rates in different parts of the galaxy and supernova ejecta, a cosmic chemical memory of nucleosynthesis patterns, rather than an inhomogeneous injection, is the source of isotopic anomalies. According to this view, volatility patterns and some isotopic patterns are mapped onto a grain-size spectrum, and the FUN systematics may be explained by interstellar sputtering. Furthermore, meteoritic He and Ne abundances are inferred to be presolar, and the ubiquitous titanium isotopic anomalies are explained by processes of chemical fixation and condensation in varying environments.

Clayton, D. D.↗

Regoliths on small bodies in the solar system

A regolith is defined as a layer or mantle of loose, incoherent, rocky material of whatever origin, that nearly everywhere forms the surface of the land and rests on coherent bedrock. The regoliths on many planetary bodies are the result of continual impacts, which transform coherent surfaces into fragmental debris. The present investigation is concerned with the special case of regolith formation and evolution on small objects, such as asteroids and meteorite parent bodies. First order models of regolith evolution on asteroidal surfaces are constructed on the basis of data provided by studies of lunar samples and meteorites. It appears that regolith formation proceeds by deposition of discrete layers of the widely spread ejecta primarily from the larger impacts. Moderate-size (100-300 km diameter) asteroids are covered by modest regoliths of the order of one km in depth. Small rocky asteroids develop negligible regoliths.

Housen, K. R.↗

An image drift compensation system for a solar pointed space telescope

Two sounding rocket test flights have been conducted in the development of an image drift compensation system designed for a solar-pointed space telescope. The system, whose scientific results are presented, employs limb-sensing photodiodes at the telescope focal plane and provides drift compensation to better than + or - 0.1 arcsec. A variation of this device will be employed by the Space Shuttle/Spacelab 2 flight of the High Resolution Telescope and Spectrograph (HRTS) Instrument. The data gathered by the rocket flights of the drift compensation system have revealed high velocity ejecta traveling through the transition zone and corona at velocities up to 400 km/sec. The HRTS configuration and its constitutive instruments' optical parameters are described.

Bartoe, J.-D. F.↗

The origin of lunar mascons - Analysis of the Bouguer gravity associated with Grimaldi

Grimaldi is a relatively small multi-ringed basin located on the western limb of the moon. Spacecraft free-air gravity data reveal a mascon associated with the inner ring of this structure, and the topographic correction to the local lunar gravity field indicates a maximum Bouguer anomaly of +90 milligals at an altitude of 70 kilometers. Approximately 20% of this positive Bouguer anomaly can be attributed to the mare material lying within the inner ring of this basin. From a consideration of the Bouguer gravity and structure of large lunar craters comparable in size to the central basin of Grimaldi, it is suggested that the remaining positive Bouguer anomaly is due to a centrally uplifted plug of lunar mantle material. The uplift was caused by inward crustal collapse which also resulted in the formation of the concentric outer scarp of Grimaldi. In addition, an annulus of low density material, probably a combination of ejecta and in situ breccia, is required to fully reproduce the Bouguer gravity signature across this basin. It is proposed that Grimaldi supplies a critical test in the theory of mascon formation: crustal collapse by ring faulting and central uplift to depths of the crust-mantle boundary are requisites

Phillips, R. J.↗

Chemical rings of lunar basins from orbital X-ray data

Chemical patterns related to basin structure have been observed in digital maps of Mg/Al, Mg/Si and Al/Si variations on the nearside lunar surface. A large part of the inner topographic ring of the Smythii basin is distinguishable chemically in the orbital X-ray data because it is more anorthositic than the surrounding soil. The correlations between the chemistry and morphology of the Symthii basin, supported by X-ray data at Langrenus crater, indicate that: (1) the chemical record of basin-formation in pre-Nectarian times persists in lunar soils despite continuous meteorite bombardment of the moon; (2) strata of contrasting chemistry were excavated on the western side of the Smythii basin, whereas the lithology east of the basin is homogeneous to the depths sampled; (3) the geochemical boundary between the provinces of the eastern near side and far side may represent only surficial differences; and (4) the extent of primary ejecta from the younger Crisium basin was insufficient to mask the chemical features created by the Smythii impact approximately one Crisium-basin diameter away.

Andre, C. G.↗

Multi-ring basin formation - Possible clues from impact cratering calculations

Finite difference continuum mechanics code calculations make it possible to vary the controlling variables in an impact event and to determine basic trends at scales unavailable to experimental analysis. Orphal et al. (1980) have summarized the results of a pair of such calculations for identical projectile/target characteristics but different impact velocities. One calculation considered a relatively low velocity iron impactor (5 km/s); the other, a high velocity iron impactor (15.8 km/s). The primary purpose was to investigate the generation and transport of impact melt for the two impact energies. Attention is given to crater growth, crater ejecta, and possible implications for basin-size events. Based on extrapolations, a new scenario is proposed. The scenario incorporates elements of several existing basin models.

Schultz, P. H.↗