Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Plasma characterization in a diode with a carbon-fiber cathode

Results of optical and spectroscopic studies of the plasma formation at the surface of two types of carbon-fiber cathodes in a diode powered by an {approx}200 kV accelerating pulse are presented. It was found that during the pulse, generation of the plasma occurs in a form of several millimeter size plasma spots. In the vicinity of the cathode surface the average plasma density and temperature were found to be {approx}3x10{sup 14} cm{sup -3} and {approx}5 eV, respectively, for an electron current density of {approx}22 A/cm{sup 2}. The plasma expansion velocity toward the anode was found to be {approx}1.5x10{sup 6} cm/s during the first 150 ns of the accelerating pulse duration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Room temperature midinfrared electroluminescence from InSb/InAs quantum dot light emitting diodes

Self-assembled InSb submonolayer quantum dots (QDs) in an InAs matrix have been grown by molecular beam epitaxy using Sb{sub 2} and As{sub 2} fluxes. The structures exhibit bright midinfrared photoluminescence up to room temperature. Intense room temperature electroluminescence with a peak at wavelength near 3.8 {mu}m was observed from p-i-n light emitting diode structures containing ten InSb submonolayer QD sheets inserted within the InAs active region.

36 MATERIALS SCIENCE↗

Role of chemical reactions of arylamine hole transport materials in operational degradation of organic light-emitting diodes

We report that the representative arylamine hole transport materials undergo chemical transformations in operating organic light-emitting diode (OLED) devices. Although the underlying chemical mechanisms are too complex to be completely elucidated, structures of several identified degradation products point at dissociations of relatively weak carbon-nitrogen and carbon-carbon bonds in arylamine molecules as the initiating step. Considering the photochemical reactivities, the bond dissociation reactions of arylamines occur by the homolysis of the lowest singlet excited states formed by recombining charge carriers in the operating OLED device. The subsequent chemical reactions are likely to yield long-lived, stabilized free radicals capable of acting as deep traps--nonradiative recombination centers and fluorescence quenchers. Their presence in the hole transport layer results in irreversible hole trapping and manifests as a positive fixed charge. The extent and localization of chemical transformations in several exemplary devices suggest that the free radical reactions of hole transporting materials, arylamines, can be sufficient to account for the observed luminance efficiency loss and voltage rise in operating OLEDs. The relative bond strengths and excited state energies of OLED materials appear to have a determining effect on the operational stability of OLED devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large-scale patterning of indium tin oxide electrodes for guided mode extraction from organic light-emitting diodes

We describe a cost-efficient and large area scalable production process of organic light-emitting diodes (OLEDs) with photonic crystals (PCs) as extraction elements for guided modes. Using laser interference lithography and physical plasma etching, we texture the indium tin oxide (ITO) electrode layer of an OLED with one- and two-dimensional PC gratings. By optical transmission measurements, the resonant mode of the grating is shown to have a drift of only 0.4% over the 5 mm length of the ITO grating. By changing the lattice constant between 300 and 600 nm, the OLED emission angle of enhanced light outcoupling is tailored from -24.25 deg. to 37 deg. At these angles, the TE emission is enhanced up to a factor of 2.14.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving light output power of InGaN-based light emitting diodes with pattern-nanoporous p-type GaN:Mg surfaces

InGaN-based light emitting diodes (LEDs) with a top pattern-nanoporous p-type GaN:Mg surface were fabricated by using a photoelectrochemical (PEC) process. The peak wavelengths of electroluminescence (EL) and operating voltages were measured as 461.2 nm (3.1 V), 459.6 nm (9.2 V), and 460.1 nm (3.3 V) for conventional, nanoporous, and pattern-nanoporous LEDs using 20 mA operation current. The EL spectrum of the nanoporous LED had a larger blueshift phenomenon as a result of a partial compression strain release in the InGaN active layer through the formation of a top nanoporous surface. The light output power had 12.1% and 26.4% enhancements for the nanoporous and the pattern-nanoporous LEDs compared with conventional LEDs. The larger operating voltage of the nanoporous LED was due to the non-ohmic contact on the PEC treated p-type GaN:Mg surface. By using a pattern-nanoporous p-type GaN:Mg structure, the operating voltage of the pattern-nanoporous LED was reduced to 3.3 V. A lower compression strain in the InGaN active layer and a higher light extraction efficiency at the top nanoporous surface were observed in pattern-nanoporous LEDs for higher efficiency nitride-based LED applications.

36 MATERIALS SCIENCE↗

Elimination of total internal reflection in GaInN light-emitting diodes by graded-refractive-index micropillars

A method for enhancing the light-extraction efficiency of GaInN light-emitting diodes (LEDs) by complete elimination of total internal reflection is reported. Analytical calculations show that GaInN LEDs with multilayer graded-refractive-index pillars, in which the thickness and refractive index of each layer are optimized, have no total internal reflection. This results in a remarkable improvement in light-extraction efficiency. GaInN LEDs with five-layer graded-refractive-index pillars, fabricated by cosputtering TiO{sub 2} and SiO{sub 2}, show a light-output power enhanced by 73% and a strong side emission, consistent with analytical calculations and ray-tracing simulations.

36 MATERIALS SCIENCE↗

A broadband absorption spectrometer using light emitting diodes for ultrasensitive, in situ trace gas detection

A broadband absorption spectrometer has been developed for highly sensitive and target-selective in situ trace gas measurements. The instrument employs two distinct modes of operation: (i) broadband cavity enhanced absorption spectroscopy (BBCEAS) is used to quantify the concentration of gases in sample mixtures from their characteristic absorption features, and (ii) periodic measurements of the cavity mirrors' reflectivity are made using step-scan phase shift cavity ringdown spectroscopy (PSCRDS). The latter PSCRDS method provides a stand-alone alternative to the more usual method of determining mirror reflectivities by measuring BBCEAS absorption spectra for calibration samples of known composition. Moreover, the instrument's two modes of operation use light from the same light emitting diode transmitted through the cavity in the same optical alignment, hence minimizing the potential for systematic errors between mirror reflectivity determinations and concentration measurements. The ability of the instrument to quantify absorber concentrations is tested in instrument intercomparison exercises for NO{sub 2} (versus a laser broadband cavity ringdown spectrometer) and for H{sub 2}O (versus a commercial hygrometer). A method is also proposed for calculating effective absorption cross sections for fitting the differential structure in BBCEAS spectra due to strong, narrow absorption lines that are under-resolved and hence exhibit non-Beer-Lambert law behavior at the resolution of the BBCEAS measurements. This approach is tested on BBCEAS spectra of water vapor's 4v+{delta} absorption bands around 650 nm. The most immediate analytical application of the present instrument is in quantifying the concentration of reactive trace gases in the ambient atmosphere. The instrument's detection limits for NO{sub 3} as a function of integration time are considered in detail using an Allan variance analysis. Experiments under laboratory conditions produce a 1{sigma} detection limit of 0.25 pptv for a 10 s acquisition time, which improves with further signal averaging to 0.09 pptv in 400 s. Finally, an example of the instrument's performance under field work conditions is presented, in this case of measurements of the sum of NO{sub 3}+N{sub 2}O{sub 5} concentrations in the marine boundary layer acquired during the Reactive Halogens in the Marine Boundary Layer field campaign.

36 MATERIALS SCIENCE↗

Influence of exposure to 980 nm laser radiation on the luminescence of Si:Er/O light-emitting diodes

Erbium (Er) codoping with oxygen (O) in Si is a well-known method for producing electroluminescent material radiating at 1.54 {mu}m through a 4f shell transition of Er{sup 3+} ions. In this work the influence of exposure to 980 nm radiation on the electroluminescence (EL) of reverse biased Si:Er/O light-emitting diodes (LEDs), which give a strong room temperature 1.54 {mu}m intensity, is presented and discussed. All the device layers, including Er/O doped Si sandwiched between two Si{sub 0.82}Ge{sub 0.18} layers, have been grown on silicon on insulator substrates using molecular beam epitaxy and processed to fabricate edge emitting Si:Er/O waveguide LEDs. Electromagnetic mode confinement simulations have been performed to optimize the layer parameters for waveguiding. The temperature dependence of the 1.54 {mu}m EL intensity exhibits an abnormal temperature quenching with a peak near -30 deg. C, and at -160 deg. C it has decreased by a factor of 5. However, irradiating the devices with a 980 nm laser gives an enhancement of the 1.54 {mu}m EL intensity, which is more dramatic at low temperatures (e.g., -200 deg. C) where the quenched EL signal is increased up to almost the same level as at room temperature. The enhancement of the EL intensity is attributed to the photocurrent generated by the 980 nm laser, reducing the detrimental avalanche current.

36 MATERIALS SCIENCE↗

Probing radical kinetics in the afterglow of pulsed discharges by absorption spectroscopy with light emitting diodes: Application to BCl radical

Measuring decay rates of radical densities in the afterglow of pulsed plasmas is a powerful approach to determine their gas phase and surface loss kinetics. We show that this measurement can be achieved by absorption spectroscopy with low cost and simple apparatus by using light emitting diodes as a light source. The feasibility is demonstrated by monitoring BCl radicals in pulsed low pressure high-density BCl{sub 3} plasmas. It is shown that BCl is lost both in the gas phase by reacting with Cl{sub 2} with a cross section of 9 A{sup 2} and in the chamber walls with a sticking coefficient of about 0.3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TiN/Al Ohmic contacts to N-face n-type GaN for high-performance vertical light-emitting diodes

We report on the electrical properties of TiN(30 nm)/Al(200 nm) Ohmic contacts to N-face n-type GaN for high-performance vertical light-emitting diodes and compare them with those of Ti(30 nm)/Al(200 nm) contacts. Both the as-deposited samples show Ohmic behaviors with contact resistivity of (6.0-7.2)x10{sup -4} {omega} cm{sup 2}. However, annealing the samples at 300 deg. C causes the degradation of their electrical properties. Furthermore, unlike the TiN/Al contacts, the Ti/Al contacts suffer from aging degradation when exposed to air. Based on the x-ray photoemission spectroscopy and secondary ion mass spectrometry results, Ohmic formation and degradation mechanisms are briefly described and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Super high voltage Schottky diode with low leakage current for x- and {gamma}-ray detector application

A significant improvement in x-/{gamma}-ray detector performance has been achieved by forming both rectifying and near-Ohmic contacts by the deposition of Ni on opposite surfaces of semi-insulating CdTe crystals pretreated by special chemical etching and Ar-ion bombardment with different parameters. The reduced injection of the minority carriers from the near-Ohmic contact in the neutral part of the diode provides low leakage current even at high bias (<50 nA/cm{sup 2} at 2000 V and 293 K). The electrical properties of the detectors are well described quantitatively by the generation-recombination Sah-Noyce-Shockley theory excepting the high reverse voltage range where some injection of minority carriers takes place.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sr{sub 3}Al{sub 2}O{sub 5}Cl{sub 2}:Ce{sup 3+},Eu{sup 2+}: A potential tunable yellow-to-white-emitting phosphor for ultraviolet light emitting diodes

The Sr{sub 3}Al{sub 2}O{sub 5}Cl{sub 2}:Ce{sup 3+},Eu{sup 2+} phosphors were prepared by solid state reaction. The obtained phosphors exhibit a strong absorption in the UV-visible region and have two intense emission bands at 444 and 609 nm. The energy transfer from the Ce{sup 3+} to Eu{sup 2+} ions was observed, and the critical distance has been estimated to be about 24.5 A by spectral overlap method. Furthermore, the developed phosphors can generate lights from yellow-to-white region under the excitation of UV radiation by appropriately tuning the activator content, indicating that they have potential applications as an UV-convertible phosphor for white light emitting diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light-extraction enhancement in GaN-based light-emitting diodes using grade-refractive-index amorphous titanium oxide films with porous structures

Amorphous titanium oxide (a-TiO{sub x}:OH) films prepared by plasma-enhanced chemical-vapor deposition at 200 and 25 deg. C are in turn deposited onto the GaN-based light-emitting diode (LED) to enhance the associated light extraction efficiency. The refractive index, porosity, and photocatalytic effect of the deposited films are correlated strongly with the deposition temperatures. The efficiency is enhanced by a factor of {approx}1.31 over that of the uncoated LEDs and exhibited an excellent photocatalytic property after an external UV light irradiation. The increase in the light extraction is related to the reduction in the Fresnel transmission loss and the enhancement of the light scattering into the escape cone by using the graded-refractive-index a-TiO{sub x}:OH film with porous structures.

36 MATERIALS SCIENCE↗

GaN-based light-emitting diode with textured indium tin oxide transparent layer coated with Al{sub 2}O{sub 3} powder

Surface-textured InGaN/GaN light-emitting diodes (LEDs) coated with transparent Al{sub 2}O{sub 3} powder were fabricated by natural lithography combined with inductively coupled plasma etching. For surface texturing, 300 nm size Al{sub 2}O{sub 3} powder is used as an etching mask by simply coating the surface using a spin-coating process. Also, the powders are left on the surface after surface texturing to further increase extraction efficiency. At 20 mA, the light output power of the textured indium tin oxide (ITO) InGaN/GaN LEDs coated with the Al{sub 2}O{sub 3} powder is enhanced by {approx}112% compared with the conventional nontextured ITO LED. The enhanced light output power is attributed to the improved extraction efficiency resulting from an overall decrease in the total internal reflection due to the textured surface and the Al{sub 2}O{sub 3} powder coating.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Top-emission Si-based phosphor organic light emitting diode with Au doped ultrathin n-Si film anode and bottom Al mirror

We report a highly efficient top-emission Si-based phosphor organic light emitting diode (PhOLED) with an ultrathin polycrystalline n-Si:Au film anode and a bottom Al mirror. This anode is formed by magnetron sputtering followed by Ni induced crystallization and then Au diffusion. By optimizing the thickness of the n-Si:Au film anode, the Au diffusion temperature, and the other parameters of the PhOLED, the highest current and power efficiencies of the n-Si:Au film anode PhOLED reached 85{+-}9 cd/A and 80{+-}8 lm/W, respectively, corresponding to an external quantum efficiency of 21{+-}2% and a power conversion efficiency of 15{+-}2%, respectively, which are about 60% and 110% higher than those of the indium tin oxide anode counterpart and 70% and 50% higher than those of the bulk n{sup +}-Si:Au anode counterpart, respectively.

36 MATERIALS SCIENCE↗

On the saturation in the average transmitted current in two-dimensional planar diodes

The relation between average transmitted current density (J{sub TR}) and injected current density (J{sub IN}) in a two-dimensional planar diode is investigated using particle-in-cell simulation. Beyond the space charge limited value of injected current density, J{sub TR} is found to increase slowly with J{sub IN} and finally saturate for higher values. The physics of gradual increase in J{sub TR} to the saturation value is explained using the electric field profile at the cathode surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bright three-band white light generated from CdSe/ZnSe quantum dot-assisted Sr{sub 3}SiO{sub 5}:Ce{sup 3+},Li{sup +}-based white light-emitting diode with high color rendering index

In this study, bright three-band white light was generated from the CdSe/ZnSe quantum dot (QD)-assisted Sr{sub 3}SiO{sub 5}:Ce{sup 3+},Li{sup +}-based white light-emitting diode (WLED). The CdSe/ZnSe core/shell structure was confirmed by energy dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy. The CdSe/ZnSe QDs showed high quantum efficiency (79%) and contributed to the high luminous efficiency ({eta}{sub L}) of the fabricated WLED. The WLED showed bright natural white with excellent color rendering property ({eta}{sub L}=26.8 lm/W, color temperature=6140 K, and color rendering index=85) and high stability against the increase in forward bias currents from 20 to 70 mA.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancement of electrical property by oxygen doping to copper phthalocyanine in inverted top emitting organic light emitting diodes

We reported the evidence of oxygen doping to copper-phthalocyanine (CuPc) by O{sub 2}-plasma treatment to inverted top-emitting organic light-emitting diodes (ITOLEDs). In situ synchrotron-radiation photoelectron spectroscopy results showed that a new Cu-O bond appeared and the energy difference between the highest-occupied molecular orbital and E{sub F} is lowered by 0.15 eV after plasma treatment. The oxygen ions chemically interacted with Cu atoms and transferred charges to the CuPc. Thus the hole injection barrier was lowered, enhancing the electroluminescent property of ITOLEDs.

36 MATERIALS SCIENCE↗