Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Plotting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Flow through axially aligned sequential apertures of the orifice and Borda types

Choked flow rate and pressure profile data were obtained and studied for two axially aligned sequential configurations consisting of four Borda type inlets of 1.9 1/D with two separation distances of 0.8 and 30 diameters and four orifice type inlets of 0.5 1/D with two separation distances of 0.66 and 32 diameters. Data were obtained using fluid nitrogen over the reduced inlet temperature and pressure range 0.68 T/T sub c gas and P/P sub c to 2. A flow coefficient reduced temperature plot can be used to represent the flow rate data for each geometry. At the larger separation distances, the pressure profiles dropped sharply at the entrance and partially recovered within each of the Borda and orifice inlet configurations; the exception being the last inlet where at low entrance temperatures, fluid jetting could occur. For the smaller spacings fluid jetting was prevalent throughout each of the inlet configurations at lower inlet temperatures. These results are in qualitative agreement with data of tubes with single Borda or sharp edge orifice type inlets to 105 1/D and water flow visualization studies.

Hendricks, R. C.↗
NASA NTRS1981

Application of SEASAT-1 Synthetic Aperture Radar (SAR) data to enhance and detect geological lineaments and to assist LANDSAT landcover classification mapping

Digital SEASAT-1 synthetic aperture radar (SAR) data were used to enhance linear features to extract geologically significant lineaments in the Appalachian region. Comparison of Lineaments thus mapped with an existing lineament map based on LANDSAT MSS images shows that appropriately processed SEASAT-1 SAR data can significantly improve the detection of lineaments. Merge MSS and SAR data sets were more useful fo lineament detection and landcover classification than LANDSAT or SEASAT data alone. About 20 percent of the lineaments plotted from the SEASAT SAR image did not appear on the LANDSAT image. About 6 percent of minor lineaments or parts of lineaments present in the LANDSAT map were missing from the SEASAT map. Improvement in the landcover classification (acreage and spatial estimation accuracy) was attained by using MSS-SAR merged data. The aerial estimation of residential/built-up and forest categories was improved. Accuracy in estimating the agricultural and water categories was slightly reduced.

Sekhon, R.↗
NASA NTRS1986

Spectral characteristics and the extent of paleosols of the Palouse formation

Spectral relationships were investigated for several bare soil fields which were in summer fallow rotation on the date of the imagery. Printouts of each band were examined and compared to aerial photography. Bands with dissimilar reflectance patterns for known areas were then combined using ratio techniques which were proven useful in other studies (Williams, 1983). Selected ratios were Thematic Mapper (TM) 1/TM4, TM3/TM4, and TM5/TM4. Cluster analyses and Baysian and Fastclass classifier images were produced using the three ratio images. Plots of cluster analysis outputs revealed distinct groupings of reflectance data representing green crops, ripened crops, soil and green plants, and bare soil. Bare soil was represented by a line of clusters on plots of the ratios TM5/TM4 and TM3/TM4. The soil line was investigated further to determine factors involved in the distributin of clusters alone the line. The clusters representing the bare soil line were also studied by plotting the Tm5/TM4, TM1/TM4 dimension. A total of 76 soil samples were gathered and analyzed for organic carbon.

Frazier, B. E.↗
DOE OSTI2020

Nonlinear Logistic Regression Mixture Experiment Modeling for Binary Data Using Dimensionally Reduced Components

This article presents and illustrates an approach using nonlinear logistic regression for modeling binary response data from a mixture experiment when the components can be partitioned into groups used to form dimensionally-reduced pseudocomponents (DRPs). A DRP is a linear combination of the components in a group, where the linear combinations over all groups are normalized so that the DRP proportions sum to unity. Nonlinear logistic regression is required because, after normalization of the linear combinations, the model expressed in terms of the DRPs is nonlinear in the parameters that specify the linear combinations. A method for obtaining nonparametric tolerance limits on the probability of a “success” for the binary response variable using a bootstrap approach is also presented. Having three DRPs enables viewing data and modeling results on a ternary plot even though there may be many more than three mixture components. A real database, involving whether or not nepheline crystals form in simulated nuclear waste glass after cooling, is used to illustrate the nonlinear logistic regression modeling and nonparametric tolerance limit approaches when there are three DRPs.

Waste glass, Nepheline, Mixture experiment, Logist↗
DOE OSTI2022

Context matters: Natural tree mortality can lead to neighbor growth release or suppression

Where competition suppresses tree growth, mortality of adjacent trees can release the surviving individuals, leading to a growth increase. However, primary forests are complicated systems, where trees interact in both competitive and facilitative ways mediated by their size, species, and the broad ecological context in which they grow. Thus, the magnitude and even direction of growth responses to the mortality of nearby trees may vary, which has implications for our understanding of community- and ecosystem-level dynamics following mortality events. Unfortunately, although many studies focus on the impacts of light availability and general crowding on tree growth, we know relatively little about the effects of naturally occurring mortality events on the growth of neighboring trees. To address this issue, we used 40 years of data from 15 permanent forest-monitoring plots in Mt Rainier old-growth forests, comparing observed to expected radial growth of individual trees following the death of their nearest neighbor. Although we found evidence of a general growth-release response, this was not universal among all trees, with small trees in particular exhibiting growth suppression (rather than release) following neighboring tree mortality. In addition to small size, growth-suppression was more likely if the dead neighbor was the same species, consistent with facilitative effects as mediated through belowground networks. At the stand level, the average growth release after nearest neighbor mortality was greatest in low-density stands with large trees, with elevation and community composition also playing a role. Decades more monitoring could reveal how long growth release (or suppression) is sustained by individual trees following neighboring mortality events, as well as potential response lags and the role of species identity in determining whether interactions with neighbors are competitive or facilitative. Nonetheless, our results suggest that although mature trees have competitive effects on their larger neighbors, they also have an important role in supporting the ingrowth of small trees. More broadly, we demonstrate that the nature of interactions between individual neighboring trees is highly context dependent.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Structure–Composition Relationships for Mg–Ni and Mg–Fe Olivine

Olivine is a dynamic and important mineral in the crust and mantle with relevance to processes important to climate change technology, such as geologic carbon storage and critical mineral recovery. In this work, we critically evaluated and compiled a new database of olivine diffraction data, lattice parameters, and composition to enable rapid Ni-Mg-Fe olivine composition determination. A compilation of olivine X-ray diffraction data and chemical compositions from both the literature and the International Centre for Diffraction Data (ICDD) powder database was assembled to plot both the forsterite-fayalite and forsterite-liebenbergite solid solution lines. Here we present an expanded dataset to delineate equations and relationships used for quantifying the correlations between olivine lattice parameters and chemical compositions in Mg 2 SiO 4 -Fe 2 SiO 4 (forsterite-fayalite) and Mg 2 SiO 4 -Ni 2 SiO 4 (forsterite-liebenbergite) olivine solid solution series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Aboveground Rather Than Belowground Productivity Drives Variability in Miscanthus × giganteus Net Primary Productivity

Quantifying the carbon (C) uptake of Miscanthus × giganteus ( M × g ) in both aboveground and belowground structures (e.g., net primary productivity (NPP)) and differences among methodological approaches is crucial. Our objectives were to directly measure Mxg NPP and evaluate the effects of nitrogen application, location, and belowground biomass sampling methods. We hypothesize that increased nitrogen application increases the overall NPP of M × g and that quantifying rhizome biomass using excavations will produce the lowest variability between replicates. We collected biomass from mature M × g stands from three locations in Iowa with three nitrogen application rates and one site in Illinois. We destructively sampled at two time points, when rhizome mass is anticipated to be at a minimum (initial) and anticipated to be at its maximum (peak). Biomass was collected from 1 × 1 m quadrats in which one in-clump and one beside-clump cores were collected and then excavated to 30 cm depth to extract all rhizomes. We found that aboveground M × g NPP ranged from 15.4 Mg DM ha –1 year –1 to 36.4 Mg DM ha –1 year–1 and belowground M × g NPP ranged from 4.4 Mg DM ha –1 year –1 to 19.6 Mg DM ha –1 year –1 . M × g NPP varied across sites, fertilization, and calculation assumptions. Aboveground NPP (yield) was on average 68.7% of the total NPP. Root-to-shoot ratios at peak biomass decreased with nitrogen application rate, from an average of 1.9 for 0 N plots to 0.89 for 224 N fertilized plots. There was more variation in core data than from excavations; however, when in-clump and beside-clump cores were averaged together, core and excavation averages were not different. Overall, these results show that the range of mature M × g NPP is driven by aboveground productivity, influenced by nitrogen application and site. Our results provide useful data to constrain agro-ecosystem models and provide crucial insights for future perennial belowground sampling.

Hartman, Theodore [Univ. of Illinois at Urbana-Cha↗
DOE OSTI2025

Measurements and Analyses to Enable Science for the Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE)

Coastal cities provide the opportunity to characterize the substantial effects of manmade particles on marine cloud properties and processes. La Jolla lies to the north of San Diego, California, but it is often about a day directly downwind of the major pollution sources located in the ports of Los Angeles and Long Beach. The large dynamic range of aerosol particle concentrations combined with the multi-hour to multi-day persistence of stratocumulus cloud layers makes the site ideal for investigating the seasonal changes in cloud and aerosol properties as well as the quantitative relationships between cloud and aerosol properties. The Eastern Pacific Cloud Aerosol Precipitation Experiment (EPCAPE) characterized the extent, radiative properties, aerosol interactions, and precipitation characteristics of stratocumulus clouds in the Eastern Pacific across all four seasons at two coastal sites in La Jolla. This project was designed to enhance and expand the scientific uses of the ARM AMF1 measurements from EPCAPE. The goal was to ensure meaningful observations were collected that would enable science. The project included the following objectives: (1) Reviewing the ARM AMF1 measurements [ARM, 2021a; b] and circulating a summary of the measurements each week, (2) Comparing AMF1 measurements to those provided by collaborators (including filter measurements at the pier), (3) Collecting and analyzing filter samples from Scripps Pier by Fourier Transform Infrared spectroscopy (FTIR) and X-ray Fluorescence (XRF), (4) Assisting in operations of instruments provided by Guest PIs when possible, and (5) Providing an initial compilation of EPCAPE aerosol and cloud seasonal differences. The expected outcomes of these objectives were enhanced proposals and publications using EPCAPE measurements by helping to identify instrument issues, expanded data access and awareness by distributing weekly plots and related summaries, improved source-related attribution of aerosols with elemental tracers, additional observations provided by Guest PIs, and accelerated ACI studies enabled by the compiled seasonal summaries of aerosol and cloud properties. Three examples of the science enabled by this project are findings that (i) aerosol and cloud aqueous production contributes more than half of sulfate particle mass concentration, (ii) upwind sources make chemical composition very similar at nearby sites despite local differences in meteorology, and (iii) most of the large mass concentration of semi-volatile organic components is co-emitted and co-evaporated with nitrate. Together these findings illustrate how ARM extended field campaigns in coastal regions can be used to constrain ACI processes with direct observations. By using the unique ARM suite of cloud radiative products in addition to the measured aerosol properties at a coastal location, we were able to address the more specific question of which aerosol particles cause how much of the effects on clouds. Identifying this signature in coastal areas provides an opportunity to test the representation of aerosol sources by global models in a range of clean and urban-influenced conditions.

Russell, Lynn [Univ. of California, San Diego, CA ↗
DOE OSTI2023

Full spectrum (350-2500 nm) leaf and canopy spectral reflectance, Seward Peninsula, Alaska, 2019

Full-range (350 - 2500 nm) leaf and canopy reflectance spectra of various Arctic tundra ecosystem endmembers, including species-level leaf reflectance, canopy-scale species endmember spectra, plot-scale spectra, and transect spectra. These data were collected in support of ongoing NASA ABoVE AVIRIS data synthesis work. The datasets were collected at the NGEE-Arctic watershed sites, Kougarok MM64 and MM80, and Teller MM27 on the Seward Peninsula, Alaska. The data were collected in July 2019 using a full-range Spectra Vista Corporation (SVC) HR-1024i spectroradiometer. Leaf-level spectra were collected with the original SVC leaf clip/plant probe connected to the spectrometer through a 1.15 meter long fiber optic cable, while canopy-scale reflectance was collected with an 8-degree field-of-view (FOV) foreoptic lens. All spectral measurements were collected as calibrated surface radiance and converted to surface reflectance using a 99.99% reflective Spectralon white reference standard. For those canopy spectra collected with associated functional trait data, the FOV of the instrument was positioned to include the same leaves harvested for functional trait measurements, including leaf mass per area (LMA) and foliar carbon and nitrogen content (see leaf trait data package for these data). Canopy spectra were obtained for 23 different species, and leaf spectra for 8 species. This data package includes processed canopy and leaf spectra (*.csv), processed dGPS locations (*.csv and *.kmz), digital photographs of spectral targets (*.jpg) and raw data from spectroradiometer and dGPS instruments (compressed as tar.gz). Metadata files include data descriptions (_dd.csv) for tabular data and a key to species symbols used in data files. All included files are listed and described in NGA212_flmd.csv.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1971

Coverage by land, sea, and airplane surveys, 1900-1967.

The worldwide coverage of the earth by land, sea, and aircraft magnetic surveys since the beginning of the 20th century is shown on three world maps for surface surveys spanning the periods of 1900-1930, 1930-1955, and 1955-1967, respectively, on a fourth map for ship-towed magnetometer surveys performed after 1956, and on a fifth map for 1953-1966 airborne survey data. The technique used, involving a position plotting of each measurement with a microfilm plotter, results in the appearance of heavily surveyed regions as completely darkened areas. The coverage includes measurements at about 100,000 land stations, airborne measurements at over 90,000 points, and marine measurements at over 25,000 points. The marine measurements cover over 1,000,000 km of trackline.

Fabiano, E.↗
NASA NTRS1973

Noise measurements from a large-scale lift fan transport in the 40- by 80-foot wind tunnel

Noise data measurements from a large scale lift fan transport model aircraft were made in the 40- by 80-foot wind tunnel. The model had two lift fans in deep inlets in the forward fuselage and two lift-cruise fans in pods on the aft fuselage. The noise data measurements are presented as listings and plots of sounds pressure level versus 1/3-octave center frequency.

Atencio, A., Jr.↗
NASA NTRS1974

Water survey of Canada: Application for use of ERTS-A for retransmission of water resources data

The author has identified the following significant results. The fact that water resources data can be retransmitted from remote areas of Canada by polar orbiting spacecraft to users in population centers on a near real time basis reliably, accurately, and at relative low cost continues to be demonstrated. Over 60,000 transmissions from the nine data collection platforms installed at Water Survey of Canada gauging stations have been received. The stage and ice-out data retransmitted via ERTS-1 have been plotted on a chart record produced by a water stage servo-manometer installed on the Albany River. The stage increased smoothly until shortly after noon on May 19, 1974. During this time the indicator showed that the ice surface was intact. The stage then dropped sharply and the indicator read that the ice was out. The erratic chart trace after that was consistent with the assumption that the ice surface had broken up and that some short duration jams of broken ice were occurring.

Halliday, R. A.↗
NASA NTRS1975

A flight investigation of oscillating air forces: Equipment and technique

The equipment and techniques are described which are to be used in a project aimed at measuring oscillating air forces and dynamic aeroelastic response of a swept wing airplane at high subsonic speeds. Electro-hydraulic inertia type shakers installed in the wing tips will excite various elastic airplane modes while the related oscillating chordwise pressures at two spanwise wing stations and the wing mode shapes are recorded on magnetic tape. The data reduction technique, following the principle of a wattmeter harmonic analyzer employed by Bratt, Wight, and Tilly, utilizes magnetic tape and high speed electronic multipliers to record directly the real and imaginary components of oscillatory data signals relative to a simple harmonic reference signal. Through an extension of this technique an automatic flight-flutter-test data analyzer is suggested in which vector plots of mechanical admittance or impedance would be plotted during the flight test.

Reed, W. H., III↗
NASA NTRS1977

A compilation of spacecraft loads data from four Titan Centaur Launch Vehicle flights. Volume 1: Acoustics data

The payloads carried by the first four Titan Centaur launch vehicle flights were, a Viking spacecraft dynamic simulator, the Helios A spacecraft, and the two Viking spacecraft. Dynamic loads data were accumulated from these four flights for application to the Viking spacecraft. The accoustics data include time histories and spectral analysis plots of accoustic pressure measurements made in the Centaur and payload compartment during launch flight. Summary plots are presented to show composite spectra for liftoff and Mach 1/Max Q periods of flight.

Kachadourian, G.↗
NASA NTRS1978

Coronal gas in the Galaxy. I - A new survey of interstellar O VI

Ultraviolet spectra of 40 O- and B-type stars have been intensively scanned in the vicinity of the O VI transitions at 1032 and 1038 A with the Copernicus satellite. This survey of the high-temperature (log T about 5.5) phase of interstellar gas is an extension of the earlier observations of interstellar O VI by Jenkins and Meloy (1974), bringing the total coverage up to 72 stars. Except for a few distant stars, the overall quality of the present data surpasses that of the earlier work. Plots of absorption optical depths versus radial velocity are presented for both transitions in each star. Total column densities (or their upper limits), velocity centroids, and velocity widths have been extracted from the profiles and tabulated, with the results of Jenkins and Meloy (1974) included. Qualitatively, the highly variable O VI densities and velocities seem to exhibit no systematic patterns or regional trends; there is no recognizable correlation in the behavior of coronal gas with pronounced features of galactic structure.

Jenkins, E. B.↗
NASA NTRS1979

A graphical summary of solar wind electron content observations by Pioneer 6, 8, and 9

Between 1965 and 1972, solar wind density measurements were obtained by Mariner 5 and Pioneer 6, 7, 8, and 9 using a radio science method called the 'dual-frequency experiment'. The measurements and data processing are now terminated. A graphical summary is presented of the best of the resulting data, showing the average electron number density of the solar wind across radio paths that vary in length up to 1.8 AU and that lie broadside to the flow direction. These graphs summarize 3.4 years of observations with a time resolution of 1 hour; the measurements provided 1-min resolution and spanned 7 years. Because the orientation and length of the paths change continually and have a major influence on the interpretation of these data, a spacecraft trajectory chart and a plot of the corotation interval are provided.

Croft, T. A.↗
NASA NTRS1981

Short interval testing of solar cells

A drawback of conventional electrical evaluation procedures regarding solar cells is related to time consuming operations required in the determination of specific parameters, such as the maximum power point, from the plotted curves, and to the transfer of data to a large digital computer for analysis and manipulation. This is especially true when large numbers of cells must be measured. To overcome such drawbacks, a digital short interval tester was designed and constructed. The new tester provides rapid and accurate measurements at constant temperature. The utilization of a light shutter makes it possible to measure up to 200 data points along the I-V curve in less than a second, thus avoiding thermal effects. Because the system is digital, parameters such as the maximum power may be calculated directly from the data.

Saylor, C. R.↗
NASA NTRS1984

Postprocessing for the UCLA climate model

Postprocessing programs written to analyze the results of a general circulation model are described. The model history data is interpolated to pressure surfaces, converted from 64-bit Cyber words to 32 bit IBM words, and transferred to tape for further analysis. The time average program reads the interpolation output tape and produces 15-day time averages. The model outputs a very detailed record for selected grid points. This data is sent to a tape in Cyber full words. The conversion program changes the format of the tape from 64 bit Cyber words to 32 bit IBM words, processing a month of data at a time. The grid-point history sorting program inputs the converted grid point history tape and sorts it by time. The end product is a tape with a time history of each field for every point. After the PBP data has been stored, it can be plotted. The plotting package is flexible, and allows the choice of fields and grid points. The one-dimensional fields are plotted as functions of time, and a daily summary is also produced. For the two-dimensional fields, time-height cross sections and daily summaries are produced. The model plotting package produces plots for all fields on the time average and pressure tapes. These plots include world maps, polar projections, zonal means, vectors, streamlines, and latitude-height plots.

Abeles, J.↗