SEARCH · Engineering Papers

Results for “DISPERSIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

All sources NASA NTRS DOE OSTI

NASA NTRS1989

On the signal-to-noise ratio in IUE high-dispersion spectra

An observational and data reduction technique for fixed pattern noise (FPN) and random noise (RN) in fully extracted IUE high-dispersion spectra is described in detail, along with actual empirical values of signal-to-noise ratio (S/N) achieved. A co-addition procedure, involving SWP and LWR cameras observations of the same spectrum at different positions in the image format, provides a basis to disentangle FPN from RN, allowing each average amplitude, within a given wavelength interval, to be estimated as a function of average flux number. Empirical curves, derived with the noise algorithm, make it possible to estimate the S/N in individual spectra at the wavelengths investigated. The average S/N at the continuum level in well-exposed stellar spectra varies from 10 to 20, for the orders analyzed, depending on position in the spectral format. The co-addition procedure yields an improvement in S/N by factors ranging from 2.3 to 2.9. Direct measurements of S/N in narrow, line-free wavelength intervals of individual and co-added spectra for weak-lined stars yield comparable, or in some cases somewhat higher, S/N values and improvement factors.

Leckrone, David S.↗

NASA NTRS1990

Camera artifacts in IUE low-dispersion spectra

Sky-background images obtained by the International Ultraviolet Explorer (IUE) were analyzed to study artificial spectral features (camera artifacts) in low-dispersion spectra. The artifacts mimic emission features and have been present in long-exposure spectra since the launch of the IUE satellite. The camera artifacts are strong in spectra characterized by long exposure times because they scale in time-integrated flux with the background level, which increases during the exposure due to camera phosphorescence. The artifacts cannot be detected in spectra obtained from short, direct exposures of flat-field lamps or standard stars. Plots of average sky-background spectra for the three operational IUE cameras (SWP, LWP, and LWR) are given to aid scientists in the identification of artifacts in their spectra.

Crenshaw, D. Michael↗

NASA NTRS1990

A new approach to remove interorder background in high dispersion IUE images

A two dimensional Chebyshev interpolating scheme, followed by modeling of point spread functions as Voigt profiles, is proposed for final archiving IUESIPS to remove the interorder overlap from the smoothed background fluxes of high dispersion International Ultraviolet Explorer (IUE) images. Tests of the first and last stages of the algorithm suggest that it can give a considerably better zero point than the old IUESIPS algorithm which samples local interorder background.

Smith, Myron A.↗

NASA NTRS1990

Optical dispersion relations for diamondlike carbon films

Ellipsometric measurements on plasma deposited diamondlike amorphous carbon (a-C:H) films were taken in the visible, (E = 1.75 to 3.5 eV). The films were deposited on Si and their properties were varied using high temperature (up to 750 C) anneals. The real (n) and imaginary (k) parts of the complex index of refraction, N, were obtained simultaneously. Following the theory of Forouhi and Bloomer, a least squares fit was used to find the dispersion relations n(E) and k(E). Reasonably good fits were obtained, showing that the theory can be used for a-C:H films. Moreover, the value of the energy gap, Eg, obtained in this way was compared the the Eg value using conventional Tauc plots and reasonably good agreement was obtained.

Alterovitz, Samuel A.↗

NASA NTRS1991

Creep and fracture of dispersion-strengthened materials

The creep and fracture of dispersion strengthened materials is reviewed. A compilation of creep data on several alloys showed that the reported values of the stress exponent for creep varied between 3.5 and 100. The activation energy for creep exceeded that for lattice self diffusion in the matrix in the case of some materials and a threshold stress behavior was generally reported in these instances. The threshold stress is shown to be dependent on the interparticle spacing and it is significantly affected by the initial microstructure. The effect of particle size and the nature of the dispersoid on the threshold stress is not well understood at the present time. In general, most studies indicate that the microstructure after creep is similar to that before testing and very few dislocations are usually observed. It is shown that the stress acting on a dispersoid due to a rapidly moving dislocation can exceed the particle yield strength of the G sub p/1000, where G sub p is the shear modulus of the dispersoid. The case when the particle deforms is examined and it is suggested that the dislocation creep threshold stress of the alloy is equal to the yield strength of the dispersoid under these conditions. These results indicate that the possibility that the dispersoid creep threshold stress is determined by either the particle yield strength or the stress required to detach a dislocation from the dispersoid matrix interface. The conditions under which the threshold stress is influenced by one or the other mechanism are discussed and it is shown that the particle yield strength is important until the extent of dislocation core relaxation at the dispersoid matrix interface exceeds about 25 pct. depending on the nature of the particle matrix combination. Finally, the effect of grain boundaries and grain morphology on the creep and fracture behavior of dispersoid strengthened alloys is examined.

Raj, Sai V.↗

NASA NTRS1989

A compilation of redshifts and velocity dispersions for Abell clusters (Struble and Rood 1987): Documentation for the machine-readable version

The machine readable version of the compilation, as it is currently being distributed from the Astronomical Data Center, is described. The catalog contains redshifts and velocity dispersions for all Abell clusters for which these data had been published up to 1986 July. Also included are 1950 equatorial coordinates for the centers of the listed clusters, numbers of observations used to determine the redshifts, and bibliographical references citing the data sources.

Warren, Wayne H., Jr.↗

NASA NTRS1991

I-BIEM calculations of the frequency dispersion and AC current distribution at disk and ring-disk electrodes

The Iterative Boundary Integral Equation Method (I-BIEM) has been applied to the problem of frequency dispersion at a disk electrode in a finite geometry. The I-BIEM permits the direct evaluation of the AC potential (a complex variable) using complex boundary conditions. The point spacing was made highly nonuniform, to give extremely high resolution in those regions where the variables change most rapidly, i.e., in the vicinity of the edge of the disk. Results are analyzed with respect to IR correction, equipotential surfaces, and reference electrode placement. The current distribution is also examined for a ring-disk configuration, with the ring and the disk at the same AC potential. It is shown that the apparent impedance of the disk is inductive at higher frequencies. The results are compared to analytic calculations from the literature, and usually agree to better than 0.001%.

Boris D Cahan↗

NASA NTRS1990

The microstructure and properties of rapidly solidified, dispersion-strengthened NiAl

An advanced rapid solidification technology for processing reactive and refractory alloys, utilized to produce large quantities of melt-spun filaments of NiAl, is presented. The melt-spun filaments are pulverized to fine particle sizes, and subsequently consolidated by hot extrusion or hot isostatic pressing. Rapid solidification process gives rise to very fine-grained microstructures. However, exposure to elevated temperature during hot consolidation leads to grain growth. Alloying agents such as borides, carbides, and tungsten can pin the grain boundaries and retard the grain growth. Various alloy compositions are investigated. The eventual goal is to utilize the hot-extruded and forged stock to grow single-crystal NiAl blades for advanced gas-turbine engine applications. Single-crystal NiAl, containing a uniform dispersion of carbide strengthening precipitates, is expected to lead to highly creep-resistant turbine blades, and is of considerable interest to the aerospace propulsion industry.

Jha, S. C.↗

NASA NTRS1990

Dispersal of gases generated near a lunar outpost

The dispersal of gases evolved by prospective lunar base operations is presently modeled analytically using continuous (mining and habitat-venting) and impulsive (primarily rocket exhaust) injections of gases. In the case of impulsive injection, the neutral atmosphere and associated ionosphere both decay on time-scales of about 20 min; in that of continuous injection, the atmosphere near the base grows and achieves a steady state after about 20 min. Both direct and diffusive transport mechanisms are considered, and it is concluded that for the injection rates and assumptions presently employed the artificial lunar atmospheres produced are not significantly detrimental to astronomical observations and high-vacuum materials processing operations.

Burns, Jack O.↗

NASA NTRS1990

Effective conductivity of hard-sphere dispersions

A simulation technique is used to compute zeta(2), the key three-point microstructural parameter which arises in three-point conductivity bounds on the effective conductivity sigma(e) of isotropic two-phase composites. Using the new algorithm, the zeta(2) parameter is computed for dispersions of hard spheres by Monte Carlo simulation, and the results are compared with those of several analytical calculations of zeta(2). The simulation data on zeta(2) are then used to compute three-point bounds on the conductivity sigma(e) and Torquato's (1985) approximation for sigma(e).

Miller, C. A.↗

NASA NTRS1991

A line identification study of the IUE SWP high dispersion spectrum of the UV-bright star Barnard 29 of Messier 13

A line identification study was performed of the coaddition of three SWP high dispersion IUE exposures of the UV-bright star Barnard 29 of Messier 13. One of these images took two IUE shifts. The previous study by de Boer and Savage (1983) was extended and stellar lines of C I, C II, C III, C IV, N I, N III, O I, O III, O IV,Al III, Si II, Si III, Si IV, P III, S II, and S III and interstellar lines of C I, C II, C IV, N I, N III, N IV, N V, O I, Al II, Al III, Si II, Si IV, S II, and Fe II were found. These lines are the strongest expected lines in a hot Population II star. Apparent intensity minima corresponding to interstellar features are noted, especially those matching a high velocity cloud found by de Boer and Savage.

Adelman, S. J.↗

NASA NTRS1991

Weighted slit extraction of low-dispersion IUE spectral data

The weighted slit extraction has been chosen by the IUE project as the standard extraction for low-dispersion spectra in the final IUE archives. In order to properly weight the data within the extraction slit and obtain the optimal evaluation of the true spectrum, a noise model is derived for IUE data. The exclusion of cosmic rays is demonstrated and the improvement in signal-to-noise ratio is quantified for spectra taken with a wide range of flux level. Problematic spectra, such as trailed spectra, multiple spectra, discontinuous spectra, and emission-line spectra, are extracted to demonstrate the robust nature of the method. Comparisons are made between the standard IUE Standard Image Processing System (IUESIPS) extraction, nonstandard narrow slit extraction, trailed IUESIPS extraction, and weighted extraction for these data. Other weighted slit extractions are briefly discussed. The advantages of the weighted slit extraction are: (1) the extraction improves the signal-to-noise ratio of the spectrum while conserving total flux; (2) most of the cosmic rays are automatically removed; (3) the output includes an error estimate for each point in the flux spectrum; and (4) the algorithm can be run in a batch mode that requires no special input parameters.

Kinney, A. L.↗

NASA NTRS1992

White-Light, Dispersed-Fringe Interferometric Keratometer

Proposed keratometer based on scheme involving spectral dispersal of white-light interference fringes. Instrument operates in "snapshot" mode: no scanning necessary, not necessary to immobilize patient's eye. Insensitive to vibration, involves no phase shifting, and has variable sensitivity. Intended primarily for use in medical assessments of human corneas, also used to measure shapes of animal corneas, lenses, and other aspherical or spherical reflective or partly reflective surfaces.

Hochberg, Eric B.↗

NASA NTRS1991

NASA Li/CF(x) cell problem analysis: Scanning electron microscopy with energy dispersive x ray spectrometry

An analysis was made of Lithium/carbon fluoride cell parts for possible chloride contamination induced by exposure to thionyl chloride (SOCl2); various samples were submitted for analysis. Only a portion of the analysis which has been conducted is covered, herein, namely analysis by scanning electron microscopy with energy dispersive x ray spectrometry (SEM/EDS). A strip of nickel was exposed to SOCl2 vapors to observe variations in surface concentrations of sulfur and chlorine with time. By detecting chlorine one can not infer contamination by SOCl2 only that contamination is present. Six samples of stainless steel foil were analyzed for chlorine using EDS. Chlorine was not detected on background samples but was detected on the samples which had been handled including those which had been cleaned. Cell covers suspected of being contaminated while in storage and covers which were not exposed to the same storage conditions were analyzed for chlorine. Although no chlorine was found on the covers from cells, it was found on all stored covers. Results are presented with techniques shown for analysis and identification. Relevant photomicrographs are presented.

Baker, John↗

NASA NTRS1992

Scanning electron microscope/energy dispersive x ray analysis of impact residues on LDEF tray clamps

To better understand the nature of particulates in low-Earth orbit (LEO), and their effects on spacecraft hardware, we are analyzing residues found in impacts on the Long Duration Exposure Facility (LDEF) tray clamps. LDEF experiment trays were held in place by 6 to 8 chromic-anodized aluminum (6061-T6) clamps that were fastened to the spacecraft frame using three stainless steel hex bolts. Each clamp exposed an area of approximately 58 sq cm (4.8 cm x 12.7 cm x .45 cm, minus the bolt coverage). Some 337 out of 774 LDEF tray clamps were archived at JSC and are available through the Meteoroid & Debris Special Investigation Group (M&D SIG). Optical scanning of clamps, starting with Bay/Row A01 and working toward H25, is being conducted at JSC to locate and document impacts as small as 40 microns. These impacts are then inspected by Scanning Electron Microscopy/Energy Dispersive X-ray Analysis (SEM/EDXA) to select those features which contain appreciable impact residue material. Based upon the composition of projectile remnants, and using criteria developed at JSC, we have made a preliminary discrimination between micrometeoroid and space debris residue-containing impact features. Presently, 13 impacts containing significant amounts of unmelted and semi-melted micrometeoritic residues were forwarded to Centre National d'Etudes Spatiales (CNES) in France. At the CNES facilities, the upgraded impacts were analyzed using a JEOL T330A SEM equipped with a NORAN Instruments, Voyager X-ray Analyzer. All residues were quantitatively characterized by composition (including oxygen and carbon) to help understand interplanetary dust as possibly being derived from comets and asteroids.

Bernhard, Ronald P.↗

NASA NTRS1991

Theoretical model for a Faraday anomalous dispersion optical filter

A model for the Faraday anomalous dispersion optical filter is presented. The model predicts a bandwidth of 0.6 GHz and a transmission peak of 0.98 for a filter operating on the Cs (D2) line. The model includes hyperfine effects and is valid for arbitrary magnetic fields.

Yin, B.↗

NASA NTRS1991

Emission-line galaxies in the third list of the Case Low-Dispersion Northern Sky Survey

Observations of 47 galaxies in the third Case list are reported. Thirty-five of the galaxies in the sample were selected for the presence of emission lines on the objective prism plates. At the higher spectral dispersion of the data, significant line emission was found in 46 of the 47 galaxies. Twenty-six galaxies are found to be undergoing significant bursts of star formation. Ten additional galaxies may be starburst galaxies with low-excitation spectra. Two galaxies are probably type Seyfert 2. The most distant object, CG 200, at a redshift of 0.144, has a strong broad H-alpha emission line, and is probably a Seyfert 1. Seventeen of the galaxies have been detected by IRAS. Eight of the IRAS galaxies have H-II-region-type spectra and eight have low-ionization starburst spectra. The galaxies represent a mixture of types, ranging from intrinsically faint dwarf galaxies with Mb equalling -16 mag, to powerful galaxies with MB equalling -23 mag. Galaxies CG 234 and CG 235 are interacting, as are galaxies CG 269 and CG 270.

Weistrop, Donna↗

NASA NTRS1991

Acoustic nonlinearity in dispersive solids

An investigation to consider the effects of dispersion on the generation of the static acoustic wave component is presented. It is considered that an acoustic toneburst may be modeled as a modulated continuous waveform and that the generated initial static displacement pulse may be viewed as a modulation-confined disturbance. A theoretical model for the generation of the acoustic modulation solitons evolved is developed and experimental evidence in samples of vitreous silica demonstrating the essential validity of the model is provided.

Cantrell, John H.↗