Search for the decay B s 0 → η ′ K S 0
Not Available
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
SEARCH · Engineering Papers
Results for “DI&C”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Observation of the decays 𝐵 + → Σ 𝑐 (2455) ++ $\bar{Ξ}^-_c$ and 𝐵 0 → Σ 𝑐 (2455) 0 $\bar{Ξ}^0_𝑐$
We report the first observation of the two-body baryonic decays 𝐵 + → Σ 𝑐 (2455) ++ $\bar{Ξ}^-_c$ and 𝐵 0 → Σ 𝑐 (2455) 0 $\bar{Ξ}^0_𝑐$ with significances of 7.3𝜎 and 6.2𝜎, respectively, including statistical and systematic uncertainties. The branching fractions are measured to be ℬ(𝐵 + → Σ 𝑐 (2455) ++ $\bar{Ξ}^-_c$) = (5.74 ± 1.11 ± 0.42$^{+2.47}_{−1.53}$) ×10 −4 and ℬ(𝐵 0 → Σ 𝑐 (2455) 0 $\bar{Ξ}^0_𝑐$) = (4.83 ± 1.12 ± 0.37$^{+0.72}_{−0.60}$) ×10 −4 . The first and second uncertainties are statistical and systematic, respectively, while the third ones arise from the absolute branching fractions of $\bar{Ξ}^-_c$ or $\bar{Ξ}^0_𝑐$ decays. The data samples used for this analysis have integrated luminosities of 711 fb −1 and 365 fb −1 , and were collected at the ϒ(4𝑆) resonance by the Belle and Belle II detectors operating at the KEKB and SuperKEKB asymmetric-energy 𝑒 + 𝑒 − colliders, respectively.
branching fraction↗
Measurement of the e + e − → π + π − π 0 cross section in the energy range 0.62–3.50 GeV at Belle II
We report a measurement of the e + e − → π + π − π 0 cross section in the energy range from 0.62 to 3.50 GeV using an initial-state radiation technique. We use an e + e − data sample corresponding to 191 fb − 1 of integrated luminosity, collected at a center-of-mass energy at or near the ϒ ( 4 S ) resonance with the Belle II detector at the SuperKEKB collider. Signal yields are extracted by fitting the two-photon mass distribution in e + e − → π + π − π 0 γ events, which involve a π 0 → γ γ decay and an energetic photon radiated from the initial state. Signal efficiency corrections with an accuracy of 1.6% are obtained from several control data samples. The uncertainty on the cross section at the ω and ϕ resonances is dominated by the systematic uncertainty of 2.2%. The resulting cross sections in the 0.62–1.80 GeV energy range yield a μ 3 π = [ 48.91 ± 0.23 ( stat ) ± 1.07 ( syst ) ] × 10 − 10 for the leading-order hadronic vacuum polarization contribution to the muon anomalous magnetic moment. This result differs by 2.5 standard deviations from the most precise current determination. Published by the American Physical Society 2024
Adachi, I. (ORCID:0000000322870173)↗
Impact of temperature on light yield and pulse shape discrimination of polysiloxane-based organic scintillators formulated with commercial resins
This work investigates how increased temperature affects neutron/ discrimination and light yield (LY) in several different polysiloxane-based scintillators doped with either 9,9-dimethyl-2-phenylflourene (PhF) or 2,5-diphenyloxazole (PPO) as a primary fluorophore and 9,9-dimethyl-2,7-di((E)-styryl) fluorene (SFS) as the secondary fluorophore. The polysiloxane matrices were prepared from the commercial resins Wacker Lumisil 579 or Shin-Etsu KER-6000. Control scintillators were prepared from poly(vinyltoluene) (PVT), the industry standard matrix, as a reference point for LY and pulse shape discrimination (PSD) measurements. Samples with PhF and PPO dopant concentrations of 1 wt% and 5 wt% in the polysiloxanes and 3 wt% and 5 wt% in the PVT samples were tested at 20 °C, 35 °C, and 50 °C. In the polysiloxane samples, the KER-6000 resin outperformed the Wacker 579 and PhF proved to be a better dopant than PPO in both LY and PSD capabilities. Polysiloxane scintillators showed slight decreases in LY and increases in neutron/discrimination at increased temperatures, while PVT scintillators showed a similar LY decrease with little to no improvement in neutron/discrimination at increased temperatures. Altogether, polysiloxane scintillators may not require recalibration in applications where temperatures increase up to 50 °C.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Spatial Mapping of Valence Excited-State Landscapes Using Time-Resolved Shake-Down Spectroscopy
Time-resolved X-ray photoelectron spectroscopy (XPS) is used to track the photodissociation dynamics of 2-iodothiophene following 262 nm excitation. The transient XPS features include both direct ionization of the initially populated excited states and pronounced satellite peaks arising from shake-down processes. While the direct ionization signals exhibit only minimal energy shifts during C−I bond cleavage, the shake-down transitions undergo a substantial, 5 eV, shift over the reaction coordinate. By correlating these shifts with simulated C−I bond lengths, a direct structural mapping is established that reveals the exceptional sensitivity of shake-down channels to molecular geometry. These results demonstrate that shake-down transitions provide a new and powerful probe of ultrafast structural dynamics.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Grand Challenges and Opportunities in Stimulated Dynamic and Resonant Catalysis
Traditional heterogeneous catalysis is constrained by kinetic and thermodynamic limits, such as the Sabatier principle and reaction equilibrium. Dynamic and resonant catalysts hold promise to overcome these limitations by actively oscillating a catalyst’s physical or electronic structure at the time scale of the catalytic cycle, allowing programmable control over reaction pathways, and leading to improved rate and selectivity. External stimuli such as temperature swing, mechanical strain, electric charge, and light can perturb catalyst surfaces in different ways, altering adsorbate coverage, binding energies, and transition states beyond what steady-state catalysis allows. This work surveys the current state of dynamic catalysis, introduces the concept of “ stimulando ” characterization for observing transient dynamics, and outlines key modeling, mechanistic, and benchmarking strategies to advance the field toward improved chemical transformation.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Search for the baryon number and lepton number violating decays τ − → Λ π − and τ − → Λ ¯ π − at Belle II
We present a search for the baryon number B and lepton number L violating decays τ − → Λ π − and τ − → Λ ¯ π − produced from the e + e − → τ + τ − process, using a 364 fb − 1 data sample collected by the Belle II experiment at the SuperKEKB collider. No evidence of signal is found in either decay mode, which have | Δ ( B − L ) | equal to 2 and 0, respectively. Upper limits at 90% credibility level on the branching fractions of τ − → Λ π − and τ − → Λ ¯ π − are determined to be 4.7 × 10 − 8 and 4.3 × 10 − 8 , respectively. Published by the American Physical Society 2024
Adachi, I. (ORCID:0000000322870173)↗
The CopA2-Type P 1B -Type ATPase CcoI Serves as Central Hub for cbb 3 -Type Cytochrome Oxidase Biogenesis
Copper (Cu)-transporting P 1B -type ATPases are ubiquitous metal transporters and crucial for maintaining Cu homeostasis in all domains of life. In bacteria, the P 1B -type ATPase CopA is required for Cu-detoxification and exports excess Cu(I) in an ATP-dependent reaction from the cytosol into the periplasm. CopA is a member of the CopA1-type ATPase family and has been biochemically and structurally characterized in detail. In contrast, less is known about members of the CopA2-type ATPase family, which are predicted to transport Cu(I) into the periplasm for cuproprotein maturation. One example is CcoI, which is required for the maturation of cbb 3 -type cytochrome oxidase (cbb 3 -Cox) in different species. Here, we reconstituted purified CcoI of Rhodobacter capsulatus into liposomes and determined Cu transport using solid-supported membrane electrophysiology. The data demonstrate ATP-dependent Cu(I) translocation by CcoI, while no transport is observed in the presence of a non-hydrolysable ATP analog. CcoI contains two cytosolically exposed N-terminal metal binding sites (N-MBSs), which are both important, but not essential for Cu delivery to cbb 3 -Cox. CcoI and cbb 3 -Cox activity assays in the presence of different Cu concentrations suggest that the glutaredoxin-like N-MBS1 is primarily involved in regulating the ATPase activity of CcoI, while the CopZ-like N-MBS2 is involved in Cu(I) acquisition. The interaction of CcoI with periplasmic Cu chaperones was analyzed by genetically fusing CcoI to the chaperone SenC. The CcoI-SenC fusion protein was fully functional in vivo and sufficient to provide Cu for cbb 3 -Cox maturation. In summary, our data demonstrate that CcoI provides the link between the cytosolic and periplasmic Cu chaperone networks during cbb 3 -Cox assembly.
59 BASIC BIOLOGICAL SCIENCES↗
A Weighted Analysis to Improve the X-Ray Polarization Sensitivity of the Imaging X-ray Polarimetry Explorer
Imaging X-ray Polarimetry Explorer (IXPE) is a Small Explorer mission that was launched at the end of 2021 to measure the polarization of X-ray emission from tens of astronomical sources. Its focal-plane detectors are based on the Gas Pixel Detector, which measures the polarization by imaging photoelectron tracks in a gas mixture and reconstructing their initial directions. The quality of the single track, and then the capability of correctly determining the original direction of the photoelectron, depends on many factors, e.g., whether the photoelectron is emitted at low or high inclination with respect to the collection plane or the occurrence of a large Coulomb scattering close to the generation point. The reconstruction algorithm used by IXPE to obtain the photoelectron emission direction also calculates several properties of the shape of the tracks that characterize the process. In this paper we compare several such properties and identify the best one to weight each track on the basis of the reconstruction accuracy. We demonstrate that significant improvement in sensitivity can be achieved with this approach and for this reason it will be the baseline for IXPE data analysis.
79 ASTRONOMY AND ASTROPHYSICS↗
Microstructure and phase evolution in the U-10Zr fuel investigated by in situ TEM heating experiments
The development of U-Zr metallic nuclear fuel for fast spectrum reactors is impacted by a lack of mechanistic understanding of the fuel behavior evolution under thermal irradiation conditions, despite previous works providing substantial fuel performance data. This work uses in-situ transmission electron microscopy heating experiments to study phase and microstructural evolution in several unirradiated U-10Zr specimens during rapid heating ramps (from room temperature to 1000 °C). The starting a-U + bcc-(Zr, U) eutectic microstructure began to decompose above 600 °C. The decomposition initiated from the bcc (U,Zr) phase. Similar results were observed for all specimens even when fabricated by different routes (e.g., cold rolled or annealed). As a result, the impact of observed microstructure and phase evolutions at high temperatures on fuel fabrication and in-pile fuel transient test was also discussed.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Ligand-channel-enabled ultrafast Li-ion conduction
Li-ion batteries (LIBs) for electric vehicles and aviation demand high energy density, fast charging and a wide operating temperature range, which are virtually impossible because they require electrolytes to simultaneously have high ionic conductivity, low solvation energy and low melting point and form an anion-derived inorganic interphase. We report guidelines for designing such electrolytes by using small-sized solvents with low solvation energy. The tiny solvent in the secondary solvation sheath pulls out the Li + in the primary solvation sheath to form a fast ion-conduction ligand channel to enhance Li + transport, while the small-sized solvent with low solvation energy also allows the anion to enter the first Li + solvation shell to form an inorganic-rich interphase. The electrolyte-design concept is demonstrated by using fluoroacetonitrile (FAN) solvent. The electrolyte of 1.3 M lithium bis(fluorosulfonyl)imide (LiFSI) in FAN exhibits ultrahigh ionic conductivity of 40.3 mS cm -1 at 25 °C and 11.9 mS cm -1 even at -70 °C, thus enabling 4.5-V graphite||LiNi 0.8 Mn 0.1 Co 0.1 O 2 pouch cells (1.2 Ah, 2.85 mAh cm -2 ) to achieve high reversibility (0.62 Ah) when the cells are charged and discharged even at -65 °C. The electrolyte with small-sized solvents enables LIBs to simultaneously achieve high energy density, fast charging and a wide operating temperature range, which is unattainable for the current electrolyte design but is highly desired for extreme LIBs. This mechanism is generalizable and can be expanded to other metal-ion battery electrolytes.
25 ENERGY STORAGE↗
Measurement of C P asymmetries in B 0 → ϕ K s 0 decays with Belle II
Not provided.
Astronomy & Astrophysics↗
Measurement of branching fractions, C P asymmetry, and isospin asymmetry for B → ρ γ decays using Belle and Belle II data
We present measurements of B + → ρ + γ and B 0 → ρ 0 γ decays using a combined data sample of 772 × 10 6 B B ¯ pairs collected by the Belle experiment and 387 × 10 6 B B ¯ pairs collected by the Belle II experiment in e + e − collisions at the ϒ ( 4 S ) resonance. After an optimized selection, a simultaneous fit to the Belle and Belle II datasets yields 114 ± 12 B + → ρ + γ and 99 ± 12 B 0 → ρ 0 γ decays. The measured branching fractions are ( 13.1 − 1.9 − 1.2 + 2.0 + 1.3 ) × 10 − 7 and ( 7.6 ± 1.3 − 0.8 + 1.0 ) × 10 − 7 for B + → ρ + γ and B 0 → ρ 0 γ decays, respectively, where the first uncertainty is statistical and the second is systematic. We also measure the isospin asymmetry A I ( B → ρ γ ) = ( 10.9 − 11.7 − 7.3 + 11.2 + 7.8 ) % and the direct C P asymmetry A C P ( B + → ρ + γ ) = ( − 8.2 ± 15.2 − 1.3 + 2.0 ) % . Published by the American Physical Society 2025
Adachi, I. (ORCID:0000000322870173)↗
Search for a μ + μ − resonance in four-muon final states at Belle II
We report on a search for a resonance X decaying to a pair of muons in e + e − → μ + μ − X events in the 0.212 – 9.000 GeV / c 2 mass range, using 178 fb − 1 of data collected by the Belle II experiment at the SuperKEKB collider at a center of mass energy of 10.58 GeV. The analysis probes two different models of X beyond the standard model: a Z ′ vector boson in the L μ − L τ model and a muonphilic scalar. We observe no evidence for a signal and set exclusion limits at the 90% confidence level on the products of cross section and branching fraction for these processes, ranging from 0.046 fb to 0.97 fb for the L μ − L τ model and from 0.055 fb to 1.3 fb for the muonphilic scalar model. For masses below 6 GeV / c 2 , the corresponding constraints on the couplings of these processes to the standard model range from 0.0008 to 0.039 for the L μ − L τ model and from 0.0018 to 0.040 for the muonphilic scalar model. These are the first constraints on the muonphilic scalar from a dedicated search. Published by the American Physical Society 2024
Astronomy & Astrophysics↗
Search for the chiral magnetic effect in Au+Au collisions at $\sqrt{s_{NN}}$ = 27 GeV with the STAR forward event plane detectors
A decisive experimental test of the Chiral Magnetic Effect (CME) is considered one of the major scientific goals at the Relativistic Heavy-Ion Collider (RHIC) towards understanding the nontrivial topological fluctuations of the Quantum Chromodynamics vacuum. In heavy-ion collisions, the CME is expected to result in a charge separation phenomenon across the reaction plane, whose strength could be strongly energy dependent. The previous CME searches have been focused on top RHIC energy collisions. In this Letter, we present a low energy search for the CME in Au+Au collisions at $\sqrt{s_{NN}}$ = 27 GeV. We measure elliptic flow scaled charge-dependent correlators relative to the event planes that are defined at both mid-rapidity |η| < 1.0 and at forward rapidity 2.1 < |η| < 5.1. We compare the results based on the directed flow plane ( $Ψ$ 1 ) at forward rapidity and the elliptic flow plane ( $Ψ$ 2 ) at both central and forward rapidity. The CME scenario is expected to result in a larger correlation relative to $Ψ$ 1 than to $Ψ$ 2 , while a flow driven background scenario would lead to a consistent result for both event planes. In 10-50% centrality, results using three different event planes are found to be consistent within experimental uncertainties, suggesting a flow driven background scenario dominating the measurement. We obtain an upper limit on the deviation from a flow driven background scenario at the 95% confidence level. This work opens up a possible road map towards future CME search with the high statistics data from the RHIC Beam Energy Scan Phase-II.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Search for Higgs boson exotic decays into Lorentz-boosted light bosons in the four-τ final state at $\sqrt{s}$ = 13 with the ATLAS detector
A search for exotic decays of the Higgs boson into a pair of low-mass scalars that subsequently decay into τ-leptons, H → aa → τ + τ – τ + τ – , is presented. In models with Yukawa-like couplings, the decay to τ-leptons is favoured for light a-bosons, with mass in the range of 2m τ < m a < 2m b . Results are presented in the range of 4 GeV < m a < 15 GeV using the 140 fb –1 of proton–proton collisions at $\sqrt{s}$ = 13 TeV recorded with the ATLAS detector during Run 2 of the Large Hadron Collider. This search focuses on the scenario where, for both di-τ pairs, one of the τ-leptons decays to hadrons and neutrinos, while the other decays to a muon and neutrinos. In this mass range, the a → τ + τ – is Lorentz-boosted and a dedicated muon removal technique is used to reconstruct the di-τ pairs.
BSM Higgs↗
Cracking in polymer substrates for flexible electronic devices and its mitigation
Mechanical reliability plays a critical role in determining the durability of flexible electronic devices because of the significant mechanical stresses they experience during manufacturing and operation. Many such devices are built on sheets comprising stiff transparent-conducting oxide (TCO) electrode films on compliant polymer substrates, and it is generally assumed that the high-toughness polymer substrates do not crack. Contrary to this assumption, here we show extensive cracking in the polymer substrates during bending of a variety of TCO/polymer sheets, and a device example — flexible perovskite solar cells. Such substrate cracking, which compromises the overall mechanical integrity of the entire device, is driven by the amplified stress-intensity factor caused by the elastic mismatch at the film/substrate interface. To mitigate this substrate cracking, an interlayer-engineering approach is designed and experimentally demonstrated. This approach is potentially applicable to myriad flexible electronic devices, with stiff films on compliant substrates, for improving their durability and reliability.
42 ENGINEERING↗
Dynamics of implosion, bounce, and re-implosion of a shell directly driven by a time-shaped laser pulse
Gas-filled plastic spherical shells have been imploded using the 60-beam OMEGA laser. The same laser pulse was used as in a previous experiment, which demonstrated the dynamic formation of a shell by irradiating a homogeneous plastic foam sphere. In the present experiment, the shell initially implodes, bounces, and expands; a new shell then forms and undergoes a second implosion. Analysis of x-ray self-emission-streaked images and sequences of 2D x-ray self-emission framing camera images show shell evolution that is in reasonable agreement with 1D simulations. Shell integrity and symmetry are well maintained until the formation of the new shell. The final implosion, instead, is affected by substantial asymmetries.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗