Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DATA BASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Variability of wetland reflectance and its effect on automatic catergorization of satellite imagery

The author has identified the following significant results. A technique for training automated analysis of satellite multispectral data based on in situ measurements of target reflectance was tested and applied in delineating cover communities in Delaware's tidal wetlands. Land cover categorization of data from the same overpass in four test wetland areas was carried out using a four category classification system. The tests indicate that training data based on in situ reflectance measurements and atmospheric correction of LANDSAT data can produce comparable accuracy of categorization to that achieved using more conventional relative radiance training. Analysis of the four wetlands cover categories (salt marsh cordgrass, salt hay, water, and unvegetated tidal flat) produced average categorization accuracies of 82.1% by conventional relative radiance training and 81.4% by use of in situ reflectance measurements.

Klemas, V.↗

Modular space station phase B extension integrated ground operations

Requirements for development test, manufacturing, facilities, GSE, training, logistics support, and launch operations are described. The prime integrating requirement is the early establishment of a common data base and its use throughout the design, development, and operational life of the station. The common data base is defined, and the concept of its use is presented. Development requirements for the station modules and subsystems are outlined along with a master development phasing chart.

Selegue, D. F.↗

Computer aided processing using laser measurements

The challenge exists of processing the STS and its cargo through KSC facilities in the most timely and cost effective manner possible. To do this a 3-D computer graphics data base was established into which was entered the STS, payloads, and KSC facilities. The facility drawing data are enhanced by laser theodolite measurements into an as-built configuration. Elements of the data base were combined to study orbiter/facility interfaces payload/facility access problems and design/arrangement of various GSE to support processing requirements. With timely analysis/design utilizing the 3-D computer graphics system, costly delays can be avoided. Better methodology can be analyzed to determine procedures for cost avoidance.

Davis, R. M.↗

An assessment of mission and configuration variations on multi-role fighter/attack aircraft concepts

This paper presents the results of a series of configuration studies conducted in connection with the NASA agility design study project. The purpose of these in-house studies was to develop a parametric data base of configuration concepts and resulting mission performances for a variety of notional fighter/attack missions. This data base will then be used to assess the impact of the imposition of agility requirements on these configurations. Three vehicle concepts were evaluated, and resulting vehicle sizes, weights, and mission performances were compared. Each configuration was then optimized for varying mission requirements and technology levels. It was found that small variations in mission requirements can have significant impact on the design choices. It was also found that optimization of engine cycle variables results in significant improvements in take-off gross weight and vehicle performance regardless of the concept being explored. Finally, results indicate that signature considerations such as internal vs. external weapons carriage can cause dramatic changes in vehicle size, weight, and mission performance.

Logan, Michael J.↗

Final Technical Report

This grant supported research into uses of the 'Hubble Space Telescope' Guide Star Selection System data base for important astrophysical problems ancillary to HST observations. The initial focus was to use the data to survey the frequency of wide binary stars at high galactic latitude, as a probe of local dark matter. In the course of this work, it was also discovered that the data base could be used for a purpose never envisaged by its designers, namely, detection of proper motions in faint stars. Some further evaluation of this capability supported by the grant led to the discovery of an entirely new class of stellar object, namely the dwarf carbon star. Publications supported by this grant, including both papers in refereed journals, and also two Ph.D. thesis dissertations, are described briefly.

Margon, Bruce↗

Archival of Seasat-A satellite scatterometer data merged with in situ data at selected, illuminated sites over the ocean

A large data base of Seasat-A Satellite Scatterometer (SASS) measurements merged with high-quality surface-truth wind, wave, and temperature data has been documented. The data base was developed for all times when selected in situ measurement sites were within the SASS footprint. Data were obtained from 42 sites located in the coastal waters of North America, Australia, Western Europe, and Japan and were assembled by correlating the SASS and surface-truth measurements in both time and distance. These data have been archived on a set of nine-track 6250 bpi ASCII coded magnetic tapes, which are available from the National Technical Information Service.

Schroeder, Lyle C.↗

Two-dimensional interpreter for field-reversed configurations

An interpretive method is developed for extracting details of the fully two-dimensional (2D) “internal” structure of field-reversed configurations (FRC) from common diagnostics. The challenge is that only external and “gross” diagnostics are routinely available in FRC experiments. Inferring such critical quantities as the poloidal flux and the particle inventory has commonly relied on a theoretical construct based on a quasi-one-dimensional approximation. Such inferences sometimes differ markedly from the more accurate, fully 2D reconstructions of equilibria. An interpreter based on a fully 2D reconstruction is needed to enable realistic within-the-shot tracking of evolving equilibrium properties. Presented here is a flexible equilibrium reconstruction with which an extensive data base of equilibria was constructed. An automated interpreter then uses this data base as a look-up table to extract evolving properties. This tool is applied to data from the FRC facility at Tri Alpha Energy. It yields surprising results at several points, such as the inferences that the local β (plasma pressure/external magnetic pressure) of the plasma climbs well above unity and the poloidal flux loss time is somewhat longer than previously thought, both of which arise from full two-dimensionality of FRCs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lightning Detection Efficiency Analysis Process: Modeling Based on Empirical Data

A ground based lightning detection system employs a grid of sensors, which record and evaluate the electromagnetic signal produced by a lightning strike. Several detectors gather information on that signal s strength, time of arrival, and behavior over time. By coordinating the information from several detectors, an event solution can be generated. That solution includes the signal s point of origin, strength and polarity. Determination of the location of the lightning strike uses algorithms based on long used techniques of triangulation. Determination of the event s original signal strength relies on the behavior of the generated magnetic field over distance and time. In general the signal from the event undergoes geometric dispersion and environmental attenuation as it progresses. Our knowledge of that radial behavior together with the strength of the signal received by detecting sites permits an extrapolation and evaluation of the original strength of the lightning strike. It also limits the detection efficiency (DE) of the network. For expansive grids and with a sparse density of detectors, the DE varies widely over the area served. This limits the utility of the network in gathering information on regional lightning strike density and applying it to meteorological studies. A network of this type is a grid of four detectors in the Rondonian region of Brazil. The service area extends over a million square kilometers. Much of that area is covered by rain forests. Thus knowledge of lightning strike characteristics over the expanse is of particular value. I have been developing a process that determines the DE over the region [3]. In turn, this provides a way to produce lightning strike density maps, corrected for DE, over the entire region of interest. This report offers a survey of that development to date and a record of present activity.

Rompala, John T.↗

Development of a global cloud model for simulating earth-viewing space missions.

Existing global cloud models are improved and expanded so that they might be more effectively used in planning and evaluating potential earth-viewing space missions. A relationship is developed between the ground and satellite-derived cloud-amount frequency distributions. This relationship is used to improve internal consistency between the ground-observed unconditional statistics and the satellite-derived conditional statistics as tabulated in previous models. A statistical technique is developed which permits the scaling of the conditional statistics to time and distance separations other than those for which the data base is tabulated. A new technique to increase or decrease the representative area size of the statistical data base is developed. Both the scaling and area adjustment techniques are shown to represent significant improvements over the techniques previously employed.

Greaves, J. R.↗

Facility requirements for helicopter noise research

Development of future helicopter noise prediction methods requires an accurate experimental data base for correlation studies or assessment of theoretical prediction methods. The aerodynamic and acoustic performance criteria for conducting experimental studies of helicopter noise using existing test facilities were defined. Requirements for ground-based facilities were described in addition to the limitations associated with full scale and model scale studies. Flight testing methods were also evaluated briefly and the restrictions associated with these approaches were cited. Finally, a general evaluation of ground-based and flight testing methods is given. Based on this presentation, future investigators can select the experimental approach best suited for generating a desired data base. Also, facility improvements need to extend the state of the art in helicopter noise experimental studies so that problems can be identified.

Schlinker, R. H.↗

Building an information model (with the help of PSL/PSA)

Problem Statement Language/Problem Statement Analyzer (PSL/PSA) applications, which were once a one-step process in which product system information was immediately translated into PSL statements, have in light of experience been shown to result in inconsistent representations. These shortcomings have prompted the development of an intermediate step, designated the Product System Information Model (PSIM), which provides a basis for the mutual understanding of customer terminology and the formal, conceptual representation of that product system in a PSA data base. The PSIM is initially captured as a paper diagram, followed by formal capture in the PSL/PSA data base.

Callender, E. D.↗

Influence of bulk turbulence and entrance boundary layer thickness on the curved duct flow field

The influence of bulk turbulence and boundary layer thickness on the secondary flow development in a square, 90 degree turning duct was investigated. A three-dimensional laser velocimetry system was utilized to measure the mean and fluctuating components of velocity at six cross-planes in the duct. The results from this investigation, with entrance boundary layer thickness of 20 percent, were compared with the thin boundary layer results documented in NASA CR-174811. The axial velocity profiles, cross-flow velocities, and turbulence intensities were compared and evaluated with regard to the influence of bulk turbulence intensity and boundary layer thickness, and the influence was significant. The results of this investigation expand the 90 degree curved duct experimental data base to higher turbulence levels and thicker entrance boundary layers. The experimental results provide a challenging benchmark data base for computational fluid dynamics code development and validation. The variation of inlet bulk turbulence intensity provides additional information to aid in turbulence model evaluation.

Crawford, R. A.↗

Influence of bulk turbulence and entrance boundary layer thickness on the curved duct flow field

The objective of this investigation was the experimental evaluation of bulk turbulence and boundary thickness influence on the secondary flow development in a square, 90 deg turning duct. A three dimensional laser velocimetry system was utilized to measure the mean and fluctuating components of velocity in the large curved duct facility. The three dimensional development of the viscous shear layers in the curved duct has a strong influence on the complete flow field. Since ducted three dimensional flows are found in many engineering applications, including gas turbine engines, and contain high turbulence levels and high wall heat transfer rates, they present a difficult challenge to computational fluid mechanics codes. Turbulence modeling remains one of constraints to CFD advance due to inadequate physical understanding and experimental definition of turbulent shear flows. The results of this investigation expand the curved duct data base to higher turbulence levels and thicker entrance boundary layers. The experimental results provide a challenging benchmark data base for computational fluid dynamics code development and validation. The variation of inlet bulk turbulence intensity provides additional information to aid in turbulence model evaluation.

Crawford, Roger A.↗

Influence of bulk turbulence and entrance boundary layer thickness on the curved duct flow field

The objective of this investigation was the experimental evaluation of bulk turbulence and boundary thickness influence on the secondary flow development in a square, 90 deg turning duct. A three dimensional laser velocimetry system was utilized to measure the mean and fluctuating components of velocity in the large curved duct facility. The three dimensional development of the viscous shear layers in the curved duct has a strong influence on the complete flow field. Since ducted three dimensional flows are found in many engineering applications, including gas turbine engines, and contain high turbulence levels and high wall heat transfer rates, they present a difficult challenge to computational fluid mechanics codes. Turbulence modeling remains one of constraints to CFD advance due to inadequate physical understanding and experimental definition of turbulent shear flows. The results of this investigation expand the curved duct data base to higher turbulence levels and thicker entrance boundary layers. The experimental results provide a challenging benchmark data base for computational fluid dynamics code development and validation. The variation of inlet bulk turbulence intensity provides additional information to aid in turbulence model evaluation.

Shohadaee, Ahmad A.↗

Prediction Capability for Transonic Nozzle Afterbodies Improved

Under the High Speed Research (HSR) Program, the NASA Lewis Research Center, the NASA Langley Research Center, and the aerospace industry have been developing exhaust nozzle concepts for a future High Speed Civil Transport (HSCT). For such an aircraft to be both economically viable and environmentally acceptable, the exhaust nozzles must combine highly efficient operation throughout the flight envelope with low noise levels at takeoff. A team composed of researchers from Lewis, Langley, and McDonnell Douglas created a two-dimensional data base using computational fluid dynamics. First, each group validated their computational fluid dynamics code against existing experimental data to gain confidence in the code's results. Next, the organizations analyzed several configurations, and the results were used to create the new data base. Then, the analysis methods were updated to account for the effects of two-dimensional nozzles. This will result in a more accurate analysis of the propulsion system for the High Speed Civil Transport.

Source record↗

Identification of Waste Streams and Chemicals of Concern for CNL's Near Surface Disposal Facility - 18057

Canadian Nuclear Laboratories (CNL) has a 70-year history in nuclear Research and Development (R and D) and the original support to the Canada Deuterium Uranium (Candu) reactor fleet. The present laboratory and operations include multiple facilities including reactors, laboratories, and buildings at various locations in Canada. The onsite facilities produced and still produce numerous and complex waste streams which have historically been placed in waste storage areas at their sites. CNL has completed the design and is in the process of licensing a Near Surface Disposal Facility (NSDF) for CNL low level waste (LLW). The current plan, pending regulatory approvals would complete construction and commissioning in 2021. CNL has identified the waste streams that are proposed to be disposed of to determine which may or may not require treatment prior to disposal and the Chemicals of Concern (COCs) that require identification and control to protect the facility, workers, public and the environment. CNL gathered the information into a Waste Stream spreadsheet that identifies the waste. Each waste stream was then evaluated as to whether or not it should meet the NSDF Waste Acceptance Criteria (WAC), and if not, which treatment technologies would be appropriate to make it ready for disposal. Understanding the hazards and associated COCs of the waste is required to safely dispose the waste. COCs present at Chalk River Laboratories (CRL) need to be identified and subsequently evaluated to determine if they pose any type of risk due to their hazardous properties or quantities. The COC data base was modified into a tool to assist waste generators. CNL has developed waste stream and COC data bases to support safe disposal of radioactive waste. Identification of waste streams and COCs for disposal is important for any disposal facility. The lessons learned by CNL as to what information is important and how to obtain the information would be useful to many facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Automating the training development process

The Automated Training Development System (ATDS) was developed as a training tool for the JPL training environment. ATDS is based on the standard for military training programs and is designed to develop training from a system perspective, focusing on components in terms of the whole process. The principal feature of ATDS is data base maintainability. Everything is contained and maintained within the data base, and, if properly developed, it could be a training component of a software delivery and provided to CM as a controlled item. The analysis, development, design, presentation, and reporting phases in the ATDS instructional design method are illustrated.

Scott, Carol J.↗