Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Content Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Representing cropping systems with the MEMS 2 ecosystem model

Abstract Croplands have been the focus of substantial investigation due to their considerable potential for sequestering carbon. Understanding the potential for soil organic carbon (SOC) sequestration and necessary management strategies will be enabled with accurate process‐based models. Accurately representing crop growth and agricultural practices will be critical for realistic SOC modeling. The MEMS 2 model incorporates a current understanding of SOC formation and stabilization, measurable SOC pools, and deep SOC dynamics and is seen as a highly promising tool to inform management intervention for SOC sequestration. Thus far, MEMS 2 has been developed to represent grasslands. In this study, we further developed MEMS 2 to model annual grain crops and common agricultural practices, such as irrigation, fertilization, harvesting, and tillage. Using four Ameriflux sites, we demonstrated an accurate simulation of crop growth and development. Model performance was strong for simulating aboveground biomass (index of agreement [d] range of 0.89–0.98) and green leaf area index (dfrom 0.90 to 0.96) across corn, soybean, and winter wheat. Good agreement with observations was also achieved for net ecosystem CO 2 exchange (dfrom 0.90 to 0.96), evapotranspiration (dfrom 0.91 to 0.94), and soil temperature (dof 0.96), while discrepancy with the available soil water content data remain (dfrom 0.14 to 0.81 at four depths to 100 cm). While we will continue model testing and improvement, MEMS 2 (version 2.14) has now demonstrated its ability to effectively simulate the growth of common grain crops and practices.

Agriculture↗

Proxy quality control of biomass particles using thermogravimetric analysis and Gaussian process regression models

Abstract The temperature experienced by reactants during preparation in a reactor is a key component in determining the yield and homogeneity of usable chemical products such as biomass particles. Thermocouples with sensors can be used to monitor spatial temperature gradients within reactors but these sensors are often too expensive and/or invasive. The present work proposes a strategy to identify optimal machine learning models to infer the maximum effective temperature experienced by particles during oxidative biomass torrefaction using key thermochemical combustion parameters. The maximum rate of weight loss, the corresponding temperature, and fixed carbon content on a dry‐ash‐free basis are used as literature‐based predictor variables obtained from thermogravimetric analysis. The evaluation of 24 machine‐learning models using the standard tenfold cross‐validation method suggests that the exponential Gaussian process regression (GPR) model is the most effective, followed by other GPR models. These high‐performing GPR models were also utilized to predict the effective preparation temperature distribution of reactor‐produced biomass particles under eight conditions of varying residence time and air‐to‐biomass ratio. The effective preparation temperature and residence time of individual biomass particles were then encoded into the torrefaction severity factor and used to estimate the energy yield of the reactor output as a novel quality control method. © 2023 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗

Chemistry imaging and distribution analysis of rare earth elements in coal using LIBS and LA-ICP-MS instruments

Currently, demand for rare earth elements (REEs) increased significantly. Coal is actively evaluated as potential economic sources for extraction of REEs. Here, in this work, laser-induced breakdown spectroscopy (LIBS) was evaluated for rapid estimation of REEs content and their distribution in the natural coal samples. The results were compared with similar laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) measurements. Thirteen coal samples (nine standard samples and five natural samples) were used in this study. Powder samples were pressed into pellets while coal chunks were directly ablated for data recording. Pellets of the powder standard samples were used to optimize the data acquisition system and then data recorded with this optimized system was used to identify the proper data acquisition and analysis models. After establishing the proper data acquisition system and analysis model using the standard samples, natural coal samples in powder form and their chunks were utilized to record LIBS and LA-ICP-MS spectra. Multivariate calibration models were developed using four of the natural samples, which were evaluated by predicting the REE content in the fifth sample. Principal component analysis was performed on the LIBS data obtained from the natural samples and it classified all the samples with high accuracy. Two-dimensional (2D) elemental mapping on coal chunk samples was also performed using both LIBS and LA-ICP-MS to study the distribution of REEs in the samples. The resulting elemental images and their correlations can be used to infer mineral distributions.

01 COAL, LIGNITE, AND PEAT↗

Novel method to control explosive shock sensitivity: Formulations, experiments and modeling

The microstructure of a heterogeneous high explosive (HE) affects its shock initiation sensitivity and detonation performance. Alteration of the void content and/or void structure (i.e., bulk heating or mechanical damage) therefore changes the shock initiation behavior. Controlling and predicting the change in shock sensitivity after an HE has undergone microstructural changes addresses an important and challenging goal for the design and understanding of novel energetic material formulations. In this study, we aimed to develop HE systems to precisely tune shock sensitivity by a thermal treatment prior to use. Specifically, we incorporated a small fraction (1 wt% or less) of thermally expandable microspheres (TEMs) during the formulation process of various plastic-bonded explosives (PBX). TEMs typically consist of a thermoplastic acrylonitrile shell (10-50 µm diameter), which encapsulates an inert low boiling hydrocarbon. Upon heating, the TEMs expand as the shell softens while the hydrocarbon gasifies, increasing the internal pressure and expanding the particle by as much as 120 vol% (irreversibly). Here, we present our progress on shock sensitivity comparisons of HE formulations doped with TEMs after heating and expansion. Experiments, using Composition C-4 thermally cycled to 120°C, showed an increase in shock sensitivity. Additionally, mesoscale modeling revealed that the TEM itself does not act as a hotspot, but instead has a secondary effect on the response of nearby voids. We conclude that TEMs indeed do provide a method to tune shock sensitivity. Further, our results emphasize the non-uniformity of shock waves at the mesoscale, and that upstream defects influence the reactivity of downstream defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intrinsic kinetics of water-inhibited ultra-lean methane oxidation over PtPd-Mg/ θ -Al 2 O 3 catalyst

Here, this study develops intrinsic methane oxidation kinetics for ultra-lean methane conditions in the presence of water over a highly active and stable PtPd–Mg/θ-Al 2 O 3 catalyst. Comprehensive laboratory experiments were conducted over a wide range of methane concentrations (150–1200 ppm CH 4 ), water contents (1–5% H 2 O), and industrially relevant space velocities (80,000 ≤ GHSV ≤ 160,000 h -1 ). These systematic experiments informed a two-dimensional, axisymmetric, multiscale reactor model that was used to develop and validate methane oxidation kinetics under practically relevant conditions, including non-isothermal operation and high conversion regimes. Combined experimental and modeling results revealed significant intraparticle diffusion resistance and transport-induced reaction exotherm at elevated temperatures, which limited catalyst utilization despite high intrinsic activity. These transport effects were explicitly incorporated into the reactor model, enabling accurate estimation of intrinsic kinetic parameters without reliance on conventional effectiveness-factor corrections. The resulting kinetic model successfully captured both kinetically controlled and mass-transfer-limited regimes and reliably predicted CH 4 conversion across broad ranges of temperature, methane concentration, and water content

Heat and mass transfer limitations↗

Assay of the Martian Regolith with Neutrons

The purpose of the research is to combine experiments and Monte Carlo transport of neutrons through volume of soil in an attempt to model neutron leakage from planetary surfaces. Emphasis is given to the change of neutron spectra as a function of water content and location. During the first stage of effort, two experiments were conducted in which leakage of neutrons from a Pu-Be source through about 30 g/cm(exp 2) of soil were measured with several counters. A Monte Carlo code, MCNP, has been used to model many of the 100 individual runs of the experiment. Hydrogen is the element that has the most dramatic effect on the neutron spectrum and its effect on the neutron spectrum is almost the same whether it is in the form of water or polyethylene. In order to simulate various water configurations, sheets of polyethylene have been used between layers of soil as well as water in several concentrations up to 18%. Comparison of experimental results to theoretical predictions made with the MCNP code were disappointing for low concentrations of water. We have made extensive calculations to see if room return could be the cause of the discrepancies. Water concentrations of the 'dry' soil were measured by two different laboratories and differed only by 0.5%. We have made calculations to optimize the next experiment and are investigating other methods of determining the water content of 'dry' soil.

Drake, Darrell M.↗

Observed and Imputed Volumetric Soil Water Content Timeseries for the New Mexico Elevation Gradient

Reliable soil water content (SWC) data are essential for understanding dryland ecosystem dynamics, but high-frequency SWC sensors often fail, creating gaps in critical datasets. To address this, we developed a Bayesian mixture model that imputes missing SWC using both linear interpolation and an ecosystem water balance model (SOILWAT2), tested across six AmeriFlux eddy covariance tower sites in the New Mexico Elevation Gradient, demonstrating its effectiveness in reconstructing SWC patterns while providing insights into the factors driving SWC variability. Daily volumetric soil water content (SWC) data are provided as csv-formatted spreadsheets for the six AmeriFlux sites (US-Seg, US-Ses, US-Wjs, US-Mpi, US-Vcp, and US-Vcs). For each site there is an observed SWC file (site_SWC_gapfill.csv) and a file that contains imputed SWC (imputed_SWC_site.csv). The observed SWC files contain temperature corrected sensor values, tower precipitation data, as well as outputs from SOILWAT2 simulations that were used to impute SWC. The imputed files contain the original observed SWC values and the imputed missing SWC values. When SWC was missing from the original data, the missing value was imputed based on the Bayesian imputation mixture model. The posterior mean of all imputed values is reported as "mean_X". When the observed SWC was NOT missing, mean_X = observed SWC value (original data). The standard deviation, 2.5th percentile and the 97.5th percentile for the imputed values are also reported in the imputed files. There are readme text files for each file type explaining the contents of each column.

54 ENVIRONMENTAL SCIENCES↗

Atmospheric Boundary-Layer and Flutter Computations Using CFD Model of the Transonic Dynamics Tunnel

This paper presents two Computational Fluid Dynamics (CFD) models of the flow in the NASA Langley Research Center Transonic Dynamics Tunnel (TDT). The TDT is a continuous-flow, closed circuit wind tunnel with a 16- by 16-foot slotted test section with cropped corners. The tunnel was originally built as the 19-ft Pressure Tunnel in 1938, but it was converted to the current transonic tunnel in the 1950s, with capabilities to use either air or heavy gas as the test medium. The first computational model describes the generation of an atmospheric-boundary-layer (ABL) profile inside the tunnel. An ABL, which includes both a wind profile and turbulence content, is one of the aerodynamic characteristics affecting the occurrence of wind-induced oscillations for a launch vehicle sitting on a pad. The challenging part of this analysis was modeling the turbulent flow inside the tunnel. This is due to the special ABL-generating hardware that was installed at the entrance of the TDT test section in order to change the downstream velocity profile and to introduce velocity fluctuations into the flow. The second CFD model builds on the computational aeroelastic results that were generated in support of the second Aeroelastic Prediction Workshop (AePW) for the NASA Benchmark Supercritical Wing (BSCW) configuration. During the AePW, the wing-only configuration (classical free-air model) was analyzed. In the current study, the flutter computations were conducted on the configuration as it was mounted in the TDT during the experiment. This includes the wing attached to the splitter plate that was attached to the wind-tunnel walls. The preliminary results show that the wind-tunnel walls marginally affect flutter prediction.

Pawel Chwalowski↗

Influence of fixed charge concentration and water uptake on ion sorption in AMPS/PEGDA membranes

Water content and charge density strongly influence ion sorption in charged membranes. However, isolating the individual effect of each parameter on ion sorption can be difficult due to experimental challenges associated with independently controlling these two variables during membrane synthesis. This frustrates development and validation of fundamental models and structure/property relationships. In this study, three series of uncharged and negatively charged hydrogel membranes were prepared using poly(ethylene glycol) diacrylate (PEGDA) as a cross-linker and 2-acrylamido-2-methylpropanesulfonic acid (AMPS) as an ionic monomer. Here, water content and charge density were controlled by varying AMPS content and PEGDA chain length. Ion sorption in these materials was measured using aqueous NaCl solutions at concentrations ranging from 0.01 to 1.0 M. At constant charge density, salt sorption increased as water content increased. At fixed water content, salt sorption decreased as charge density increased. Salt sorption in membranes with the highest water content and charge density was predicted using the Donnan/Manning model, which accounts for solution and membrane phase thermodynamic non-idealities. However, this approach could not predict sorption in weakly charged and uncharged membranes, presumably due to additional membrane phase thermodynamic non-idealities associated with ion solvation and uncharged polymer segments.

36 MATERIALS SCIENCE↗

The effect of leaf size on the microwave backscattering by corn

Attema and Ulaby (1978) proposed the cloud model to predict the microwave backscattering properties of vegetation. This paper describes a modification in which the biophysical properties and microwave properties of vegetation are related at the level of the individual scatterer (e.g., the leaf or the stalk) rather than at the level of the aggregated canopy (e.g., the green leaf area index). Assuming that the extinction cross section of an average leaf was proportional to its water content, that a power law relationship existed between the backscattering cross section of an average green corn leaf and its area, and that the backscattering coefficient of the surface was a linear function of its volumetric soil moisture content, it is found that the explicit inclusion of the effects of corn leaf size in the model led to an excellent fit between the observed and predicted backscattering coefficients. Also, an excellent power law relationship existed between the backscattering cross section of a corn leaf and its area.

Paris, J. F.↗

Enabling Space Exploration Medical System Development Using a Tool Ecosystem

The NASA Human Research Program’s (HRP) Exploration Medical Capability (ExMC) Element is utilizing a Model Based Systems Engineering (MBSE) approach to enhance the development of systems engineering products that will be used to advance medical system designs for exploration missions beyond Low Earth Orbit. In support of future missions, the team is capturing content such as system behaviors, functional decompositions, architecture, system requirements and interfaces, and recommendations for clinical capabilities and resources in Systems Modeling Language (SysML) models. As these products mature, SysML models provide a way for ExMC to capture relationships among the various products, which includes supporting more integrated and multi-faceted views of future medical systems. In addition to using SysML models, HRP and ExMC are developing supplementary tools to support two key functions: 1) prioritizing current and future research activities for exploration missions in an objective manner; and 2) enabling risk-informed and evidence-based trade space analysis for future space vehicles, missions, and systems. This paper will discuss the long-term HRP and ExMC vision for the larger ecosystem of tools, which include dynamic Probabilistic Risk Assessment (PRA) capabilities, additional SysML models, a database of system component options, and data visualizations. It also includes a review of an initial Pilot Project focused on enabling medical system trade studies utilizing data that is coordinated across tools for consistent outputs (e.g., mission risk metrics that are associated with medical system mass values and medical conditions addressed). This first Pilot Project demonstrated successful operating procedures and integration across tools. Finally, the paper will also cover a second Pilot Project that utilizes tool enhancements such as medical system optimization capabilities, post-processing, and visualization of generated data for subject matter expert review, and increased integration amongst the tools themselves.

Amador, Jennifer R.↗

Enabling Space Exploration Medical System Development Using a Tool Ecosystem

The NASA Human Research Program's (HRP) Exploration Medical Capability (ExMC) Element is utilizing a Model Based Systems Engineering (MBSE) approach to enhance the development of systems engineering products that will be used to advance medical system designs for exploration missions beyond Low Earth Orbit. In support of future missions, the team is capturing content such as system behaviors, functional decompositions, architecture, system requirements and interfaces, and recommendations for clinical capabilities and resources in Systems Modeling Language (SysML) models. As these products mature, SysML models provide a way for ExMC to capture relationships among the various products, which includes supporting more integrated and multi-faceted views of future medical systems. In addition to using SysML models, HRP and ExMC are developing supplementary tools to support two key functions: 1) prioritizing current and future research activities for exploration missions in an objective manner; and 2) enabling risk-informed and evidence-based trade space analysis for future space vehicles, missions, and systems. This paper will discuss the long-term HRP and ExMC vision for the larger ecosystem of tools, which include dynamic Probabilistic Risk Assessment (PRA) capabilities, additional SysML models, a database of system component options, and data visualizations. It also includes a review of an initial Pilot Project focused on enabling medical system trade studies utilizing data that is coordinated across tools for consistent outputs (e.g., mission risk metrics that are associated with medical system mass values and medical conditions addressed). This first Pilot Project demonstrated successful operating procedures and integration across tools. Finally, the paper will also cover a second Pilot Project that utilizes tool enhancements such as medical system optimization capabilities, post-processing, and visualization of generated data for subject matter expert review, and increased integration amongst the tools themselves.

Amador, Jennifer R.↗

Bioenergy sorghum maintains photosynthetic capacity in elevated ozone concentrations

Abstract Elevated tropospheric ozone concentration (O 3 ) significantly reduces photosynthesis and productivity in several C 4 crops including maize, switchgrass and sugarcane. However, it is unknown how O 3 affects plant growth, development and productivity in sorghum ( Sorghum bicolor L.), an emerging C 4 bioenergy crop. Here, we investigated the effects of elevated O 3 on photosynthesis, biomass and nutrient composition of a number of sorghum genotypes over two seasons in the field using free‐air concentration enrichment (FACE), and in growth chambers. We also tested if elevated O 3 altered the relationship between stomatal conductance and environmental conditions using two common stomatal conductance models. Sorghum genotypes showed significant variability in plant functional traits, including photosynthetic capacity, leaf N content and specific leaf area, but responded similarly to O 3 . At the FACE experiment, elevated O 3 did not alter net CO 2 assimilation ( A ), stomatal conductance ( g s ), stomatal sensitivity to the environment, chlorophyll fluorescence and plant biomass, but led to reductions in the maximum carboxylation capacity of phosphoenolpyruvate and increased stomatal limitation to A in both years. These findings suggest that bioenergy sorghum is tolerant to O 3 and could be used to enhance biomass productivity in O 3 polluted regions.

09 BIOMASS FUELS↗

Inversion of multiwavelength radiometer measurements by three-dimensional filtering

Remote sensing data from satellites typically have three dimensions: scan position, spacecraft position, and wavelength. Inversion of the radiometric data to infer geophysical parameters is a filtering problem in which the dimension of wavelength (or channel number) is transformed into a dimension of geophysical parameters, and the most general solution is a three-dimensional filter. Linear filters have the advantages of computational speed and easily described transfer functions; but often the measurements are nonlinear functions of the parameters to be inferred. To the extent that the nonlinear inversion problem is overdetermined, it can be modeled by a critically determined linear problem. As an example, inversion of Scanning Multichannel Microwave Radiometer (SMMR) data by means of a three-dimensional Wiener Filter is described. Atmospheric water vapor content, rain liquid water content, surface wind speed and surface temperature are the parameters inferred from the measurements. Nonprecipitating liquid water and water vapor scale height are also modeled but not retrieved. The a priori statistics on which the filter is trained have the effect of governing the selection of a trade-off point of noise as a function of resolution (in all three retrieval dimensions).

Rosenkranz, P. W.↗

Modelling a single phase voltage controlled rectifier using Laplace transforms

The development of a 20 kHz, AC power system by NASA for large space projects has spurred a need to develop models for the equipment which will be used on these single phase systems. To date, models for the AC source (i.e., inverters) have been developed. It is the intent of this paper to develop a method to model the single phase voltage controlled rectifiers which will be attached to the AC power grid as an interface for connected loads. A modified version of EPRI's HARMFLO program is used as the shell for these models. The results obtained from the model developed in this paper are quite adequate for the analysis of problems such as voltage resonance. The unique technique presented in this paper uses the Laplace transforms to determine the harmonic content of the load current of the rectifier rather than a curve fitting technique. Laplace transforms yield the coefficient of the differential equations which model the line current to the rectifier directly.

Kraft, L. Alan↗

Experimental Behavior of Sulfur Under Primitive Planetary Differentiation Processes, the Sulfide Formations in Enstatite Meteorites and Implications for Mercury.

Enstatite meteorites are the most reduced naturally-occuring materials of the solar system. The cubic monosulfide series with the general formula (Mg,Mn,Ca,Fe)S are common phases in these meteorite groups. The importance of such minerals, their formation, composition and textural relationships for understanding the genesis of enstatite chondrites (EC) and aubrites, has long been recognized (e.g. [1]). However, the mechanisms of formation of these sulfides is still not well constrained certainly because of possible multiple ways to produce them. We propose to simulate different models of formation in order to check their mineralogical, chemical and textural relevancies. The solubility of sulfur in silicate melts is of primary interest for planetary mantles, particularly for the Earth and Mercury. Indeed, these two planets could have formed, at least partly, from EC materials (e.g. [2, 3, 4]). The sulfur content in silicate melts depends on the melt composition but also on pressure (P), temperature (T) and oxygen fugacity fO2. Unfortunately, there is no model of general validity in a wide range of P-T-fO2-composition which describes precisely the evolution of sulfur content in silicate melts, even if the main trends are now known. The second goal of this study is to constrain the sulfur content in silicate melts under reducing conditions and different temperatures.

Malavergne, V.↗

Identification of Human-Induced Changes in Atmospheric Moisture Content

Data from the satellite-based Special Sensor Microwave Imager (SSM/I) show that the total atmospheric moisture content over oceans has increased by 0.41 kg/sq m per decade since 1988. Results from current climate models indicate that water vapor increases of this magnitude cannot be explained by climate noise alone. In a formal detection and attribution analysis using the pooled results from 22 different climate models, the simulated "fingerprint" pattern of anthropogenically caused changes in water vapor is identifiable with high statistical confidence in the SSM/I data. Experiments in which forcing factors are varied individually suggest that this fingerprint "match" is primarily due to human-caused increases in greenhouse gases and not to solar forcing or recovery from the eruption of Mount Pinatubo. Our findings provide preliminary evidence of an emerging anthropogenic signal in the moisture content of earth's atmosphere.

Santer, B.D.↗

Cirrus cloud model parameterizations: Incorporating realistic ice particle generation

Recent cirrus cloud modeling studies have involved the application of a time-dependent, two dimensional Eulerian model, with generalized cloud microphysical parameterizations drawn from experimental findings. For computing the ice versus vapor phase changes, the ice mass content is linked to the maintenance of a relative humidity with respect to ice (RHI) of 105 percent; ice growth occurs both with regard to the introduction of new particles and the growth of existing particles. In a simplified cloud model designed to investigate the basic role of various physical processes in the growth and maintenance of cirrus clouds, these parametric relations are justifiable. In comparison, the one dimensional cloud microphysical model recently applied to evaluating the nucleation and growth of ice crystals in cirrus clouds explicitly treated populations of haze and cloud droplets, and ice crystals. Although these two modeling approaches are clearly incompatible, the goal of the present numerical study is to develop a parametric treatment of new ice particle generation, on the basis of detailed microphysical model findings, for incorporation into improved cirrus growth models. For example, the relation between temperature and the relative humidity required to generate ice crystals from ammonium sulfate haze droplets, whose probability of freezing through the homogeneous nucleation mode are a combined function of time and droplet molality, volume, and temperature. As an example of this approach, the results of cloud microphysical simulations are presented showing the rather narrow domain in the temperature/humidity field where new ice crystals can be generated. The microphysical simulations point out the need for detailed CCN studies at cirrus altitudes and haze droplet measurements within cirrus clouds, but also suggest that a relatively simple treatment of ice particle generation, which includes cloud chemistry, can be incorporated into cirrus cloud growth.

Sassen, Kenneth↗