Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Buffer Layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68

Abrupt GaP/Si hetero-interface using bistepped Si buffer

We evidence the influence of the quality of the starting Si surface on the III-V/Si interface abruptness and on the formation of defects during the growth of III-V/Si heterogeneous crystal, using high resolution transmission electron microscopy and scanning transmission electron microscopy. GaP layers were grown by molecular beam epitaxy on vicinal Si (001). The strong effect of the Si substrate chemical preparation is first demonstrated by studying structural properties of both Si homoepitaxial layer and GaP/Si heterostructure. It is then shown that choosing adequate chemical preparation conditions and subsequent III-V regrowth conditions enables the quasi-suppression of micro-twins in the epilayer. Finally, the abruptness of GaP/Si interface is found to be very sensitive to the Si chemical preparation and is improved by the use of a bistepped Si buffer prior to III-V overgrowth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-Oxidized Siloxene Nanosheets with High Capacity, Capacity Retention, and Rate Capability in Lithium-Based Batteries

The mechanical degradation experienced by Si electrodes during Li (de)alloying reactions can potentially be mitigated by using Si-based materials with layered 2D geometries. Such materials are expected to exhibit favorable mechanical properties and be capable of buffering the volume change associated with (de)lithitation. In this work, 2D siloxene nanosheets are synthesized using a facile topotactic reaction followed by ultrasonication as an exfoliation step. Here, detailed structural and chemical characterization via electron microscopy, X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy is conducted, revealing a low-oxidized siloxene nanosheet material with only 15% surface Si-oxide. The obtained siloxene nanosheets are tested as Li-ion negative electrodes in lithium-based electrochemical cells. The cells exhibit high rate capability with a capacity of 935 mAh g –1 at 3200 mA g –1 and ≈99.5% coulombic efficiency. The inclusion of fluoroethylene carbonate (FEC) in the electrolyte improves capacity retention over 200 cycles from 13% to 77% at 1000 mA g –1 . This behavior is attributed to the FEC decomposition forming a solid electrolyte interphase (SEI) with higher ion conductivity and robust LiF/Li x PO y F z content, as characterized via XPS Raman spectroscopy.

25 ENERGY STORAGE↗

Characteristics of TiO{sub 2}/ZnO bilayer film towards pH sensitivity prepared by different spin coating deposition process

In this study, titanium dioxide (TiO{sub 2}) and zinc oxide (ZnO) bilayer film for pH sensing application will be presented. TiO{sub 2}/ZnO bilayer film with different speed of spin-coating process was deposited on Indium Tin Oxide (ITO), prepared by sol-gel method. This fabricated bilayer film was used as sensing membrane for Extended Gate Field-Effect Transistor (EGFET) for pH sensing application. Experimental results indicated that the sensor is able to detect the sensitivity towards pH buffer solution. In order to obtained the result, sensitivity measurement was done by using the EGFET setup equipment with constant-current (100 µA) and constant-voltage (0.3 V) biasing interfacing circuit. TiO{sub 2}/ZnO bilayer film which the working electrode, act as the pH-sensitive membrane was connected to a commercial metal-oxide semiconductor FET (MOSFET). This MOSFET then was connected to the interfacing circuit. The sensitivity of the TiO2 thin film towards pH buffer solution was measured by dipping the sensing membrane in pH4, pH7 and pH10 buffer solution. These thin films were characterized by using Field Emission Scanning Electron Microscope (FESEM) to obtain the surface morphology of the composite bilayer films. In addition, I-V measurement was done in order to determine the electrical properties of the bilayer films. According to the result obtained in this experiment, bilayer film that spin at 4000 rpm, gave highest sensitivity which is 52.1 mV/pH. Relating the I-V characteristic of the thin films and sensitivity, the sensing membrane with higher conductivity gave better sensitivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inverted metamorphic GaInAs solar cell grown by dynamic hydride vapor phase epitaxy

We present an inverted metamorphic rear heterojunction ~1.0 eV GaInAs solar cell deposited by dynamic hydride vapor phase epitaxy (D-HVPE) with high growth rate. This device uses a Ga 1-x In x P compositionally graded buffer (CGB) to bridge the lattice constant gap between the GaAs substrate and the Ga0.71In0.29As emitter layer. High-resolution x-ray diffraction and transmission electron microscopy confirm that the Ga 0.71 In 0.29 As emitter is grown lattice-matched to the in-plane lattice constant of the CGB with minimal generation of defects at the GaInAs/GaInP interface. The device contains a threading dislocation density of 2.3 × 10 6 cm -2 , a level that enables high-performance minority carrier devices and is comparable to previously demonstrated GaInP CGBs grown by D-HVPE. The device exhibits an open-circuit voltage of 0.589 V under a one-sun AM1.5G illumination condition and a bandgap-voltage offset of 0.407 V, indicating metamorphic epitaxial performance nearly equal to state-of-the-art devices. We analyze the dark current of the device and determine that reducing recombination in the depletion region, which can be achieved by reducing the threading dislocation density and optimizing the device doping density, will improve the device performance. Furthermore, the CGB and device layers, comprising ~8 µm of thickness, are grown in under 10 min, highlighting the ability of D-HVPE to produce high-quality metamorphic devices of all types with the potential for dramatically higher throughput compared to present technology.

14 SOLAR ENERGY↗

Analog hardware for delta-backpropagation neural networks

This is a fully parallel analog backpropagation learning processor which comprises a plurality of programmable resistive memory elements serving as synapse connections whose values can be weighted during learning with buffer amplifiers, summing circuits, and sample-and-hold circuits arranged in a plurality of neuron layers in accordance with delta-backpropagation algorithms modified so as to control weight changes due to circuit drift.

Eberhardt, Silvio P.↗

MBE AlGaN/GaN HEMT Heterostructures with Optimized AlN Buffer on Al{sub 2}O{sub 3}

The effect of molecular-beam epitaxy (MBE) growth conditions on properties of AlN epitaxial layers was investigated resulting in determination of optimal substrate temperature and ammonia flow. Optimal substrate temperature for growth of GaN and AlGaN layers was determined analyzing thermal decomposition rate of GaN. Based on the information, high electron mobility transistor heterostructures were grown on sapphire substrates using both ammonia and combined plasma-assisted/ammonia MBE modes. The highest achieved 2DEG mobility was 1992 cm{sup 2}/(V s) (at 2DEG density of 1.17 × 10{sup 13} cm{sup –2}) which is the current state-of-the-art level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simplified Procedure for Estimating Epitaxy of La2Zr2O7-Buffered NiW RABITS Using XRD

Abstract A procedure is developed for assessing the epitaxy of La(2-x)Zr(2+x)O(7) (LZO) layers on NiW RABITS. Comparing XRD patterns (theta / 2-theta scans and 2D rocking curves) of LZO films of known thickness (ellipsometry or reflectometry measurements) with those of standard samples (100% epitaxial LZO film and an isotropic LZO pellet of known density), we estimate the epitaxial (EF), and polycrystalline (PF) fractions of LZO within the layer. The procedure was tested using MOD-LZO(100 nm)/NiW tape samples with varied from 3 to 90% (reproducibly prepared by varying the humidity of Ar-5%H2 gas during heat treatment). A qualitative agreement with RHEED and quantitative (within 10%) agreement with the EBSD results was shown. Correlation between EF and Jc in 600 nm thick YBCO layer deposited on MOD-LZO/NiW using thermal coevaporation enables us to impose the EF=80% margin on the quality of LZO layer for the particular conductor architecture.

36 MATERIALS SCIENCE↗

Electrochemical and Interfacial Behavior of All Solid State Batteries Using Li10SnP2S12 Solid Electrolyte

Thio-Lithium Superionic Conductor (Thio-LISICON) Li10GeP2S12 equivalent Li10SnP2S12 (LSPS) is comparable in ionic conductivity yet with a lower cost as an electrolyte for all solid-state batteries (ASSBs). ASSBs with LSPS solid electrolyte (SE), lithium-indium alloy anode, and LiCoO2 (LCO) cathode were successfully fabricated and their electrochemical performance at 60 °C was examined. Atomic layer deposition of Li3NbO4 on LCO was conducted to improve the interfacial stability. The Li3NbO4 coating significantly improves the cycle stability of the ASSB, which retains about 85% of the initial capacity after 70 cycles at a current density of 0.13 mA/cm2, while the ASSB with uncoated LCO retains ~ 60% of the initial capacity after 70 cycles. Electrochemical impedance spectroscopy tests indicate a rapid growth of charge transfer resistance upon cycling for the cell with the uncoated LCO, primarily due to the surface instability and build-up of a space charge layer between LSPS and LCO. However, the ASSBs with Li3NbO4 coated LCO show a more stable interface with a negligible impedance increase upon cycling, attributable to the buffering and passivating roles of the Li3NbO4 coating. The interfacial microstructure was analyzed to elucidate at the underlying reasons for the impedance increase and the pivotal role of the Li3NbO4 coating. Our study indicates that the surface coating significantly improves the cycle stability of the ASSBs with LSPS as the electrolyte, mostly due to an improvement of the charge transfer mechanism. The coating reduced the interphase thickness and the interfacial resistance to about a third of the uncoated one after 10 cycles.

Vinado, Carolina↗

Growth Modes and Energetics of 101 Face Lysozyme Crystal Growth

From analyses of lysozyme 101 face growth rate data using a 2D nucleation model for layer-by-layer growth, we find the effective barrier for crystal growth to be gamma = 1.0 +/- 0.2 x 10(exp -13) erg/molecule. The magnitude of the effective barrier is 2.4 +/- 0.5 k(sub beta)T, at 22 C. We also find that beyond a critical solution supersaturation, sigma(sub c), crystal growth rates are more accurately described by a kinetic roughening hypothesis. Beyond sigma(sub c), crystals grow by the continuous addition of molecules anywhere on the crystal surface rather than layer-by-layer. The magnitude of the critical supersaturation (sigma(sub c), = 1.7 +/- 0.2) for a crossover from a layer-by-layer to continuous growth is found to be statistically independent of the solution conditions that vary with buffer pH, temperature or precipitant concentration. Using the experimentally determined values for gamma and sigma(sub c), we find the crystal growth unit to be comprised of 7 +/- 3 molecules. The energy barrier, E(sub c), for the continuous addition of the growth Units is 6.2 +/- 0.3 x 10(exp -13) erg/molecule or 15 +/1 1 k(sub beta)T at 22C.

Gorti, Sridhar↗

Full cell simulation and the evaluation of the buffer system on air-cathode microbial fuel cell

This paper presents a computational model of a single chamber, air-cathode MFC. The model considers losses due to mass transport, as well as biological and electrochemical reactions, in both the anode and cathode half-cells. Computational fluid dynamics and Monod-Nernst analysis are incorporated into the reactions for the anode biofilm and cathode Pt catalyst and biofilm. The integrated model provides a macro-perspective of the interrelation between the anode and cathode during power production, while incorporating microscale contributions of mass transport within the anode and cathode layers. Model considerations include the effects of pH (H + /OH – transport) and electric field-driven migration on concentration overpotential, effects of various buffers and various amounts of buffer on the pH in the whole reactor, and overall impacts on the power output of the MFC. The simulation results fit the experimental polarization and power density curves well. Further, this model provides insight regarding mass transport at varying current density regimes and quantitative delineation of overpotentials at the anode and cathode. Altogether, this comprehensive simulation is designed to accurately predict MFC performance based on fundamental fluid and kinetic relations and guide optimization of the MFC system.

30 DIRECT ENERGY CONVERSION↗

Narrow-band N-resonance formed in thin rubidium atomic layers

The narrow-band N-resonance formed in a {Lambda} system of D{sub 1}-line rubidium atoms is studied in the presence of a buffer gas (neon) and the radiations of two continuous narrow-band diode lasers. Special-purpose cells are used to investigate the dependence of the process on vapor column thickness L in millimeter, micrometer, and nanometer ranges. A comparison of the dependences of the N-resonance and the electromagnetically induced transparency (EIT) resonance on L demonstrates that the minimum (record) thickness at which the N-resonance can be detected is L = 50 {mu}m and that a high-contrast EIT resonance can easily be formed even at L Almost-Equal-To 800 nm. The N-resonance in a magnetic field for {sup 85}Rb atoms is shown to split into five or six components depending on the magnetic field and laser radiation directions. The results obtained indicate that levels F{sub g} = 2, 3 are initial and final in the N-resonance formation. The dependence of the N-resonance on the angle between the laser beams is analyzed, and practical applications are noted.

74 ATOMIC AND MOLECULAR PHYSICS↗

Duty Cycling Influences Current Generation in Multi-Anode Environmental Microbial Fuel Cells

Improving microbial fuel cell (MFC) performance continues to be the subject of research, yet the role of operating conditions, specifically duty cycling, on MFC performance has been modestly addressed. We present a series of studies in which we use a 15-anode environmental MFC to explore how duty cycling (variations in the time an anode is connected) influences cumulative charge, current, and microbial composition. The data reveal particular switching intervals that result in the greatest time-normalized current. When disconnection times are sufficiently short, there is a striking decrease in current due to an increase in the overall electrode reaction resistance. This was observed over a number of whole cell potentials. Based on these results, we posit that replenishment of depleted electron donors within the biofilm and surrounding diffusion layer is necessary for maximum charge transfer, and that proton flux may be not limiting in the highly buffered aqueous phases that are common among environmental MFCs. Surprisingly, microbial diversity analyses found no discernible difference in gross community composition among duty cycling treatments, suggesting that duty cycling itself has little or no effect. Such duty cycling experiments are valuable in determining which factors govern performance of bioelectrochemical systems and might also be used to optimize field-deployed systems.

Gardel, EJ↗

Atomic resolution mapping of interfacial intermixing and segregation in InAs/GaSb superlattices: A correlative study

We combine quantitative analyses of Z-contrast images with composition analyses employing atom probe tomography (APT) correlatively to provide a quantitative measurement of atomic scale interfacial intermixing in an InAs/GaSb superlattice (SL). Contributions from GaSb and InAs in the Z-contrast images are separated using an improved image processing technique. Correlation with high resolution APT composition analyses permits an examination of interfacial segregation of both cations and anions and their incorporation in the short period InAs/GaSb SL. Results revealed short, intermediate, and long-range intermixing of In, Ga, and Sb during molecular beam epitaxial growth and their distribution in the SL.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrically pumped continuous wave quantum dot lasers epitaxially grown on patterned, on-axis (001) Si

High performance III-V lasers at datacom and telecom wavelengths on on-axis (001) Si are needed for scalable datacenter interconnect technologies. We demonstrate electrically injected quantum dot lasers grown on on-axis (001) Si patterned with {111} v-grooves lying in the [110] direction. No additional Ge buffers or substrate miscut was used. The active region consists of five InAs/InGaAs dot-in-a-well layers. Here, we achieve continuous wave lasing with thresholds as low as 36 mA and operation up to 80°C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase change thermal control materials, method and apparatus

An apparatus and method for metabolic cooling and insulation of a user in a cold environment. In its preferred embodiment the apparatus is a highly flexible composite material having a flexible matrix containing a phase change thermal storage material. The apparatus can be made to heat or cool the body or to act as a thermal buffer to protect the wearer from changing environmental conditions. The apparatus may also include an external thermal insulation layer and/or an internal thermal control layer to regulate the rate of heat exchange between the composite and the skin of the wearer. Other embodiments of the apparatus also provide 1) a path for evaporation or direct absorption of perspiration from the skin of the wearer for improved comfort and thermal control, 2) heat conductive pathways within the material for thermal equalization, 3) surface treatments for improved absorption or rejection of heat by the material, and 4) means for quickly regenerating the thermal storage capacity for reuse of the material. Applications of the composite materials are also described which take advantage of the composite's thermal characteristics. The examples described include a diver's wet suit, ski boot liners, thermal socks, gloves and a face mask for cold weather activities, and a metabolic heating or cooling blanket useful for treating hypothermia or fever patients in a medical setting and therapeutic heating or cooling orthopedic joint supports.

Buckley, Theresa M.↗

Flexible composite material with phase change thermal storage

A highly flexible composite material having a flexible matrix containing a phase change thermal storage material. The composite material can be made to heat or cool the body or to act as a thermal buffer to protect the wearer from changing environmental conditions. The composite may also include an external thermal insulation layer and/or an internal thermal control layer to regulate the rate of heat exchange between the composite and the skin of the wearer. Other embodiments of the PCM composite also provide 1) a path for evaporation or direct absorption of perspiration from the skin of the wearer for improved comfort and thermal control, 2) heat conductive pathways within the material for thermal equalization, 3) surface treatments for improved absorption or rejection of heat by the material, and 4) means for quickly regenerating the thermal storage capacity for reuse of the material. Applications of the composite materials are also described which take advantage of the composite's thermal characteristics. The examples described include a diver's wet suit, ski boot liners, thermal socks, gloves and a face mask for cold weather activities, and a metabolic heating or cooling blanket useful for treating hypothermia or fever patients in a medical setting and therapeutic heating or cooling orthopedic joint supports.

Buckley, Theresa M.↗

Flexible composite material with phase change thermal storage

A highly flexible composite material having a flexible matrix containing a phase change thermal storage material. The composite material can be made to heat or cool the body or to act as a thermal buffer to protect the wearer from changing environmental conditions. The composite may also include an external thermal insulation layer and/or an internal thermal control layer to regulate the rate of heat exchange between the composite and the skin of the wearer. Other embodiments of the PCM composite also provide 1) a path for evaporation or direct absorption of perspiration from the skin of the wearer for improved comfort and thermal control, 2) heat conductive pathways within the material for thermal equalization, 3) surface treatments for improved absorption or rejection of heat by the material, and 4) means for quickly regenerating the thermal storage capacity for reuse of the material. Applications of the composite materials are also described which take advantage of the composite's thermal characteristics. The examples described include a diver's wet suit, ski boot liners, thermal socks, ,gloves and a face mask for cold weather activities, and a metabolic heating or cooling blanket useful for treating hypothermia or fever patients in a medical setting and therapeutic heating or cooling orthopedic joint supports.

Buckley, Theresa M.↗

Phase change material thermal capacitor clothing

An apparatus and method for metabolic cooling and insulation of a user in a cold environment. In its preferred embodiment the apparatus is a highly flexible composite material having a flexible matrix containing a phase change thermal storage material. The apparatus can be made to heat or cool the body or to act as a thermal buffer to protect the wearer from changing environmental conditions. The apparatus may also include an external thermal insulation layer and/or an internal thermal control layer to regulate the rate of heat exchange between the composite and the skin of the wearer. Other embodiments of the apparatus also provide 1) a path for evaporation or direct absorption of perspiration from the skin of the wearer for improved comfort and thermal control, 2) heat conductive pathways within the material for thermal equalization, 3) surface treatments for improved absorption or rejection of heat by the material, and 4) means for quickly regenerating the thermal storage capacity for reuse of the material. Applications of the composite materials are also described which take advantage of the composite's thermal characteristics. The examples described include a diver's wet suit, ski boot liners, thermal socks, gloves and a face mask for cold weather activities, and a metabolic heating or cooling blanket useful for treating hypothermia or fever patients in a medical setting and therapeutic heating or cooling orthopedic joint supports.

Buckley, Theresa M.↗