Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARCS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,225 records · Page 68
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Exhaust flow and propulsion characteristics of a pulsed MPD arc thruster.

Experimental investigation of the near-field, megawatt, single-shot exhaust for the self-field and auxiliary field cases (0 to 2 tesla) for a pulsed MPD arc thrustor. Plasma impact pressure and number density are correlated to provide velocity profiles (30,000 to 70,000 m/sec), thrust (10 to 120 N), impulse (3 to 16 N-sec) and mass accounting. The data agree with Hugel's self-field theory for the case where thrust is produced entirely by electromagnetic force. The data show that the thrust monotonically increases with auxiliary field.

Michels, C. J.↗
NASA NTRS1972

The upper atmosphere as a regulator of subauroral red arcs.

The mechanisms for producing a subauroral red arc (SARARC) are studied by solving a system of basic ionospheric and atmospheric equations. It is shown that many of the observed features of a SARARC can be explained within the framework of the two processes generally responsible for the ionospheric behavior during a magnetic storm: (1) energy conduction from the magnetosphere to the ionosphere and (2) the changes in neutral composition of the lower atmosphere caused by the increase in turbulent mixing. Both processes trigger a complex chain of events which ultimately results in the redistribution of both the charged and neutral particles, an increase in the electron, ion, and neutral temperatures, and a decrease in the electron density in the altitude region near the F2 peak. It is shown that both the occurrence and the emission intensity of a SARARC are regulated by the neutral atmosphere, even though conduction of the thermal energy from the magnetosphere to the ionosphere provides the excitation energy of the optical remission.

Chandra, S.↗
NASA NTRS1974

Grain refinement control in gas-shielded arc welding of aluminum tubing

When sections are being welded, operator varies pulse rate of power supply and simultaneously monitors signal on oscilloscope until rate is found which produces maximum arc gas voltage. Remainder of welding is performed with power supply set at this pulse rate, producing desired maximum weld puddle agitation and fine uniform weld of grain structure.

Iceland, W. F.↗
NASA NTRS1970

Hazards from High Intensity Lamps and Arcs

The principal occupational health problem generally associated with high intensity arc lamps results from exposure of the eye and skin to ultraviolet radiation. Occasionally, the chorioretinal burns are of concern. The eye is generally more susceptible than the skin to injury from high intensity optical radiation sources whether ultraviolet, visible or infrared. Recent developments in technology have shown that some high intensity optical radiation sources which have output parameters greatly different from those encountered in the natural environment present a serious chorioretinal burn hazard.

Sliney, D. H.↗
NASA NTRS1973

Vertical distribution of vibrational energy of molecular nitrogen in a stable auroral red arc and its effect on ionospheric electron densities

Previous solutions of the problem of the distribution of vibrationally excited molecular nitrogen in the thermosphere have either assumed a Boltzmann distribution and considered diffusion as one of the loss processes or solved for the energy level populations and neglected diffusion. Both of the previous approaches are combined by solving the time dependent continuity equations, including the diffusion process, for the first six energy levels of molecular nitrogen for conditions in the thermosphere corresponding to a stable auroral red arc. The primary source of molecular nitrogen excitation was subexcitation, and inelastic collisions between thermal electrons and molecular nitrogen. The reaction rates for this process were calculated from published cross section calculations. The loss processes for vibrational energy were electron and atomic oxygen quenching and vibrational energy exchange. The coupled sets of nonlinear, partial differential equations were solved numerically by employing finite difference equations.

Newton, G. P.↗
NASA NTRS1973

Overall and blade-element performance of a transonic compressor stage with multiple-circular-arc blades at tip speed of 419 meters per second

A 50-centimeter-diameter axial-flow transonic compressor stage with multiple-circular-arc blades was designed and tested to study the effects of blade shape on efficiency and stall margin. At design speed, peak efficiency of 0.80 occurred at an equivalent weight flow of 29.0 kilograms per second. Measured total pressure ratio and total temperature ratio at peak efficiency were 1.69 and 1.20, respectively. The stall margin at design speed and an equivalent weight flow of 29.0 kilograms per second was 9 percent. The measured stall margin at design weight flow and speed was 15 percent. A comparison of rotor performance made with and without the stator showed a decrease in pressure ratio, peak efficiency, and maximum weight flow with the addition of the stator.

Kovich, G.↗
NASA NTRS1973

Effect of fineness ratio on boattail drag of circular-arc afterbodies having closure ratios of 0.50 with jet exhaust at Mach numbers up to 1.30

An investigation was conducted to determine the effect of fineness ratio on the drag of circular-arc boattails at subsonic and low supersonic speeds. The boattails had closure ratios of 0.50 and incorporated convergent nozzles. The investigation was conducted statically and at Mach numbers from 0.40 to 1.30 at 0 deg angle of attack with jet total-pressure ratios varying from jet off to about 6, depending on Mach number. Low-fineness-ratio boattails had large separated-flow regions and the highest drag at all Mach numbers. Subsonic pressure-plus-friction drag levels were generally similar for boattails which did not have large separated regions. Drag-rise Mach number increased as boattail fineness ratio increased.

Reubush, D. E.↗
NASA NTRS1973

Overall and blade-element performance of a multiple-circular-arc bladed transonic compressor rotor with tip speed of 1375 feet per second

The design and experimental performance of a 20-inch-diameter multiple-circular-arc bladed axial-flow transonic compressor rotor is presented. Radial surveys of the flow conditions were made. At design speed the peak efficiency was 0.882 and occurred at a weight flow of 64.0 pounds per second. At this point the total-pressure and total-temperature ratios were 1.79 and 1.205, respectively. The stall margin at design speed was 8 percent based on weight flows and total-pressure ratios at experimental peak efficiency and near stall. The measured stall margin was 20 percent at design weight flow and speed.

Kovich, G.↗
NASA NTRS1973

Magneto-plasma-dynamic arc thruster

The performance of a magnetoplasmadynamic arc thruster, in the 600 to 2,100 seconds specific impulse range, was improved by locating its cathode in the exhaust beam downstream of the anode and main propellant injection point.

Burkhart, J. A.↗
NASA NTRS1973

Effects of fineness and closure ratios on boattail drag of circular-arc-afterbody models with jet exhaust at Mach numbers up to 1.3

The effects of variations in fineness ratio and closure ratio on the boattail drag of circular-arc afterbody models were investigated at static conditions and at Mach numbers from 0.40 to 1.30. Jet total-pressure ratio was varied from jet off to about 6, depending on Mach number. Reynolds number based on model maximum diameter varied from about 1.2 million to 2.18 million. Angle of attack was varied from -4 deg to 8 deg. The results indicate that, at subsonic speeds before the drag rise and at a scheduled pressure ratio, the total drag (pressure plus calculated skin friction) is approximately equal for configurations with the same closure ratio. Also, for configurations with the same closure ratio, increasing fineness ratio results in an increased drag-rise Mach number; and for configurations with the same fineness ratio, increasing closure ratio results in an increased drag-rise Mach number.

Reubush, D. E.↗
NASA NTRS1973

Exhaust pressure and density of various pulsed mpd-arc thruster systems

Exhaust flow in a new, 155 cm i.d., vacuum facility was compared with earlier measurements in a small (15.2 cm i.d.) duct. Reductions in post transient impact pressure were about 5:1 in the larger facility. Corresponding reduced electron number densities (approximately 2 x 10 to the 13th power/cucm) were noted. A new, 125 miscrosecond, pulse forming network power source produced no major differences in impact pressure compared to the crowbarred condenser bank used earlier. Comparing a puff gas feed of the arc chamber with a new 10 millisecond steady gas feed also showed no major difference in impact pressure for 125 miscrosecond powering.

Michels, C. J.↗
NASA NTRS1973

Mars gravity field via the short data arcs

Short arc reduction of satellite Mars tracking data shows that: (1) There is one large gravity high covering the region of Nix Olympica and the three peaks to the east (about 110 deg longitude). It has an amplitude of 50 milligals at 2200-km altitude and implies a surface mass anomaly times greater than any on earth; (2) there are no large negative gravity anomalies comparable to the positive; and (3) the large 3000-km canyon seems to originate in a gravity high and end in a gravity low.

Sjogren, W. L.↗
NASA NTRS1972

A conical arc driver for high-energy test facilities.

Review of some exploratory test results for an electrical discharge driver with a conical-shaped arc chamber. The characteristics of the discharge cycle in the conical chamber and the shock tube performance are described, and the obtained results are compared with those reported by Menard (1971).

Dannenberg, R. E.↗
NASA NTRS1973

Low-frequency flute instabilities of a hollow cathode arc discharge - Theory and experiment.

The characteristics of two low-frequency electrostatic flute instabilities of a low-pressure hollow cathode arc discharge are reported. Mode I has azimuthal mode number m = 1, and occurs when the radial electric field is negative (directed inward), while mode II has m = - 1 and occurs when the field is positive. The radial electric field is controlled by varying the potential of a secondary anode cylinder located close to the outer discharge radius. A linear perturbation analysis, based on the two-fluid equations, is given for a low-beta, collisionless, cylindrical plasma column, immersed in a uniform axial magnetic field, having a Gaussian density profile and an arbitrary radial electric field profile. Reasonable correlation between theory and experiment is demonstrated for both modes.

Ilic, D. B.↗
NASA NTRS1973

High powered arc electrodes

Nonconsumable metal electric arc electrodes are described capable of being operated in a variety of gases at various pressures, current, and powers. The cathode has a circular annulus tip to spread the emission area for improved cooling.

Hall, J. H.↗
NASA NTRS1974

Applicability of NASA (ARC) two-segment approach procedures to Boeing Aircraft

An engineering study to determine the feasibility of applying the NASA (ARC) two-segment approach procedures and avionics to the Boeing fleet of commercial jet transports is presented. This feasibility study is concerned with the speed/path control and systems compability aspects of the procedures. Path performance data are provided for representative Boeing 707/727/737/747 passenger models. Thrust margin requirements for speed/path control are analyzed for still air and shearing tailwind conditions. Certification of the two-segment equipment and possible effects on existing airplane certification are discussed. Operational restrictions on use of the procedures with current autothrottles and in icing or reported tailwind conditions are recommended. Using the NASA/UAL 727 procedures as a baseline, maximum upper glide slopes for representative 707/727/737/747 models are defined as a starting point for further study and/or flight evaluation programs.

Allison, R. L.↗
NASA NTRS1974

Electron beam, laser beam and plasma arc welding studies

This program was undertaken as an initial step in establishing an evaluation framework which would permit a priori selection of advanced welding processes for specific applications. To this end, a direct comparison of laser beam, electron beam and arc welding of Ti-6Al-4V alloy was undertaken. Ti-6Al-4V was selected for use in view of its established welding characteristics and its importance in aerospace applications.

Banas, C. M.↗