Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Data Assimilation Into a Coupled Ocean Atmosphere Model: Application to the 1997-1998 El Nino

As part of JPL's ocean data assimilation effort to study ocean circulation and seasonal-interannual climate variability, sea level anomaly observed by TOPEX altimeter, together with sea surface temperature and wind stress data, are assimilated into a simple coupled ocean atmosphere model of the tropical Pacific. Model-data consistency is examined. Impact of the assimilation (as initialization) on El Nino Southern Oscillation (ENSO) forecasts is evaluated. The coupled model consists of a shallow water component with two baroclinic modes, an Ekman shear layer, a simplified mixed-layer temperature equation, and a statistical atmosphere based on dominant correlations between historical surface temperature and wind stress anomaly data. The adjoins method is used to fit the coupled model to the data over various six-month periods from late 1996 to early 1998 by optimally adjusting the initial state, model parameters, and basis functions of the statistical atmosphere. On average, the coupled model can be fitted to the data to approximately within the data and representation errors (5 cm, 0.5 C, and 10 sq m/sq m for sea level, surface temperature, and pseudo wind stress anomalies, respectively). The estimated fields resemble observed spatio-temporal structure reasonably well. Hindcasts/forecasts of the 1997/1998 El Nino initialized from forced estimated ocean states and parameters are much more realistic than those simply initialized from ocean states (see figure below). In particular, the ability of the model to produce significant warming beyond the initial state is dramatically improved. Parameter estimation, which compensates for some model errors, is found to be important to obtaining better fits of the model to data and to improving forecasts.

Lee, Tong↗

Satellite Remote Sensing of the Liquid Water Sensitivity in Water Clouds

In estimation of the aerosol indirect effect, cloud liquid water path is considered either constant (Twomey effect) or increasing with enhanced droplet number concentrations (drizzle-suppression effect, or Albrecht effect) if cloud microphysics is the prevailing mechanism during the aerosol-cloud interactions. On the other hand, if cloud thermodynamics and dynamics are considered, the cloud liquid water path may be decreased with increasing droplet number concentration, which is predicted by model calculations and observed in ship-track and urban influence studies. This study is to examine the different responses of cloud liquid water path to changes of cloud droplet number concentration. Satellite data (January, April, July and October 1987) are used to retrieve the cloud liquid water sensitivity, defined as the changes of liquid water path versus changes of column droplet number concentrations. The results of a global survey reveal that 1) in at least one third of the cases the cloud liquid water sensitivity is negative, and the regional and seasonal variations of the negative liquid water sensitivity are consistent with other observations; 2) cloud droplet sizes are always inversely proportional to column droplet number concentrations. Our results suggest that an increase of cloud droplet number concentration leads to reduced cloud droplet size and enhanced evaporation, which weakens the coupling between water clouds and boundary layer in warm zones, decreases water supply from surface and desiccates cloud liquid water. Our results also suggest that the current evaluations of negative aerosol indirect forcing by global climate models (GCM), which are based on Twomey effect or Albrecht effect, may be overestimated.

Han, Qing-Yuan↗

Effects of Surfactant Contamination on the Next Generation Gas Trap for the ISS Internal Thermal Control System

The current dual-membrane gas trap is designed to remove non-condensed gas bubbles from the Internal Thermal Control System (ITCS) coolant on board the International Space Station (ISS). To date it has successfully served its purpose of preventing gas bubbles from causing depriming, overspeed, and shutdown of the ITCS pump. However, contamination in the ITCS coolant has adversely affected the gas venting rate and lifetime of the gas trap, warranting a development effort for a next-generation gas trap. Previous testing has shown that a hydrophobic-only design is capable of performing even better than the current dual-membrane design for both steady-state gas removal and gas slug removal in clean deionized water. This paper presents results of testing to evaluate the effects of surfactant contamination on the steady-state performance of the hydrophobic-only design.

Leimkuehler, Thomas O.↗

Bioregenerative life support: not a picnic

If humans are to live permanently in space, regenerative life support systems are an enabling technology and must replace the picnic approach of taking all supplies required for each mission. These systems are classified by technologies as either physical/chemical or bioregenerative. Both of these system-types can recycle water, remove carbon dioxide, produce oxygen, and recover essential elements from waste products. Bioregenerative can also produce food, thus, making it essential if humans are to exist in space independent of earth. A solely bioregenerative life support system includes plants as a biomass production module and microbial organisms in bioreactors as a resource recovery module. In the Advanced Life Support Program, bioregenerative life support systems are being investigated through a research and technology development project which includes large scale testing as part of the Breadboard Project and human tests conducted in the soon to be constructed BioPlex facility. Research and technology development efforts are directed toward optimizing biomass productivity in controlled chambers by developing light weight, energy efficient, and automated systems; recycling liquid and solid wastes; baselining the operation of bioreactors; determining system microbial stability; assessing chemical contamination; and building models required for long term system operations. The program will include space flight studies in the near future to determine if these life support technologies will function in microgravity. When a bioregenerative system is finally incorporated into a mission, the conversion from a picnic and resupply mentality to permanent recycling and independence from earth will be complete.

NASA Center KSC↗

The Incidence and Fate of Volatile Methyl Siloxanes in a Crewed Spacecraft Cabin

Volatile methyl siloxanes (VMS) arise from diverse, pervasive sources aboard crewed spacecraft ranging from materials offgassing to volatilization from personal care products. These sources lead to a persistent VMS compound presence in the cabin environment that must be considered for robust life support system design. Volatile methyl siloxane compound stability in the cabin environment presents an additional technical issue because degradation products such as dimethylsilanediol (DMSD) are highly soluble in water leading to a unique load challenge for water purification processes. The incidence and fate of VMS compounds as observed in the terrestrial atmosphere, water, and surface (soil) environmental compartments have been evaluated as an analogy for a crewed cabin environment. Volatile methyl siloxane removal pathways aboard crewed spacecraft are discussed and a material balance accounting for a DMSD production mechanism consistent with in-flight observations is presented.

Perry, Jay L.↗

Contamination Control in Our Solar UV Sounding Rocket Projects: CLASP/CLASP2

In the CLASP / CLASP2 experiments, the contamination control was conducted mainly for the purpose of preventing molecular contamination. In particular, the organic contamination was successfully prevented. However, in the CLASP observation, the Lyα intensity decreased due to water molecules. Thus, we obtained the importance to evaluate the influence of molecules that can be easily removed and to quantitatively evaluate the vent path during the flight.

Kano, Ryouhei↗

Optimization of a Remote Sensing Energy Balance Method over Different Canopy Applied at Global Scale

Parameterization methods which calculate turbulent heat and water fluxes with thermal remote sensing data were evaluated in the revised remote sensing surface energy balance system (SEBS) model (Chen et al., 2013). The model calculates sensible heat (H) based on the Monin-Obukhov similarity theory (MOST) and determines latent heat (LE) as the residual of energy balance. We examined the uncertainties of H and LE in the SEBS model due to five key parameters at the local station point scale. Observations at 27 flux towers located in seven land cover types (needle-leaf forest, broad leaf forest, shrub, savanna, grassland, cropland, and sparsely vegetated land) and an artificial intelligence particle swarm optimization (PSO) algorithm was combined to calibrate the five parameters (leaf drag coefficient, leaf heat transfer coefficients, roughness length for soil, and two parameters for ground heat calculation) in the SEBS model. The root-mean-square error at the site scale was reduced by 9 W/sq.m for H, and 92 W/sq.m for LE, and their correlation coefficients were increased by 0.07 (H) and 0.11 (LE) after using the calibrated parameters. The updated model validation was further conducted globally for the remotely sensed evapotranspiration (ET) calculations. Overestimation of SEBS global ET was significantly improved by using the optimized values of the parameters. The results suggested PSO was able to consistently locate the global optimum of the SEBS model, and appears to be capable of solving the ET model optimization problem.

Chen, Xuelong↗

Leveraging Google Earth Engine User Interface for Semiautomated Wetland Classification in the Great Lakes Basin at 10 m With Optical and Radar Geospatial Datasets

As one of the world’s largest freshwater ecosystems,the Great Lakes Basin houses hundreds of thousands of acres of wetlands that support a variety of crucial ecological and environmental functions at the local, regional, and global levels.Monitoring these wetlands is critical to conservation and restoration efforts, however current methods that rely on field monitoring are labor-intensive, costly, and often outdated. In this study, we present a graphical user interface constructed in Google Earth Engine called the Wetland Extent Tool (WET),which allows semi-automatic wetland classification according to a user-input area of interest and date range. WET composites datasets and conducts multi source, moderate resolution processing utilizing Landsat 8 OLI, Sentinel-2 MSI, Sentinel-1 C-SAR, and Shuttle Radar Topography Mission (SRTM) datasets to classify wetlands in the entire Great Lakes Basin. We evaluated classification results of wetlands, uplands, and open water from May-September 2019, and tested whether SRTM elevation, slope,or the Dynamic Surface Water Extent produced the most accurate results in each Great Lake Basin in conjunction with optical indices and radar composites. We found that elevation produced the most accurate classification in Lake Erie, Michigan,and Ontario, while slope performed best in Lake Huron and Superior. Lake Erie, Michigan, Ontario, and Huron achieved high overall accuracy and identification of wetlands. WET leverages cloud-computing for multi source processing of moderate resolution remote sensing data, and employs a user interface in Google Earth Engine that wetland managers and conservationists can use to monitor wetland extent in the Great Lakes Basin in near real-time.

Vanessa L Valenti↗

Thermal Inspection of a Composite Fuselage Section Using theMethod of Proper Generalized Decomposition

Proper Generalized Decomposition (PGD) is a reduced order modeling technique for the simulation of physical systems whose governing equations depend on boundary conditions, initial conditions, material properties, and geometric parameters. It uses separated representations of system covariates combined with an iterative approximation method known as successive enrichment in order to compute an accurate parameter-dependent approximation to the full governing equations. PGD can also be used as an alternative to the Singular Value Decomposition (SVD) of a matrix and therefore as an alternative to PCA thermography. In this paper PGD was used to analyze data derived from the inspection of a composite fuselage forward section using flash thermography, and the results were compared against the standard PCA approach.

Nondestructive Evaluation↗

Improving Simulation of Irrigation in a Global Land Surface Model

Studies have shown that irrigated agriculture has substantial effects on local to regional hydrologic and atmospheric processes. These effects include increased evapotranspiration and near surface humidity, decreased air and ground temperature, augmented downwind precipitation, enhanced recharge, depletion of source water stocks, and overall changes to the regional water budget. However, developers of global offline and coupled modeling systems have been slow to incorporate irrigation. This presentation will describe progress towards simulating irrigation worldwide in the Land Information System (LIS) and Global Land Data Assimilation System (GLDAS). We have developed and refined the ability to simulate sprinkler irrigation, furrow irrigation, paddy irrigation, and drip irrigation. We have reconciled multiple global and national irrigation, land cover, and crop type databases in an effort to (1) distinguish irrigated and rainfed agriculture, (2) simulate the proper distribution of crops (as sub-grid tiles) in each model grid pixel, and (3) apply the most likely irrigation method in each tile based on the crop type and country or state level information on the relative usage of sprinkler, flood, and drip irrigation. Using agricultural water withdrawal data, as available, for calibration and evaluation, we show that the implemented approach is promising but that much fine tuning remains to be done. In particular, irrigation model parameters that produce good results in one location often produce less satisfying results in others.

Matthew Rodell↗

Updates to the HTR-PROTEUS HALEU Benchmark Using Modern Analysis Methodologies

The HTR-PROTEUS IRPhEP Handbook benchmarks represent some of the highest quality benchmarks available for systems with TRISO-HALEU fuel, graphite pebbles, graphite reflector, and high neutron leakage. Nevertheless, significant variability in computed eigenvalue results was encountered in HTR-PROTEUS configurations that are relevant for transportation configurations. The team will investigate the source of these variabilities in the original benchmark. In addition, the team will investigate the HTR-PROTEUS subcritical measurements, kinetics data, and potential criticality effects from the introduction of hydrogen in the system (water ingress). The project will generate a benchmark evaluation of additional HTR-PROTEUS measurements that can significantly increase the value of these criticality benchmarks in testing nuclear codes and data to support transportation validation needs for industry and the U.S. NRC.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

SLS Ignition Overpressure-Sound Suppression System Performance Evaluated Against Historical Configurations

During the start-up of a number of launch vehicles that include solid rocket motor (SRM), the ignition transient and acoustic environments are mitigated by the implementation of a water spray system located immediately below the SRM nozzle exit plane (NEP). For NASA’s Space Launch System (SLS), this water system is referred to as the Ignition Overpressure / Sound Suppression (IOP/SS) system. The SLS Induced Environments (IE) technical discipline conducted a comprehensive evaluation of the design and as-tested performance of the IOP/SS water that will operate underneath both Boosters during the Artemis I launch. As part of this evaluation, flow rates and imagery from a number of integrated launch pad / mobile launcher IOP/SS flow tests were studied. Additional insight was leveraged from the Shuttle heritage IOP/SS system that includes data and imagery from a number of Flight Readiness Firings (FRF) and water flow tests. Lastly, the IE study included a qualitive comparison of the Shuttle and SLS systems to the equivalent water flow systems for Titan and Atlas V and determined that the NASA water flow systems are substantially different than those supporting other launch vehicles.

Ignition Overpressure↗

SLS Ignition Overpressure-Sound Suppression System Performance Evaluated Against Historical Configurations

During the start-up of a number of launch vehicles that include solid rocket motor (SRM), the ignition transient and acoustic environments are mitigated by the implementation of a water spray system located immediately below the SRM nozzle exit plane (NEP). For NASA’s Space Launch System (SLS), this water system is referred to as the Ignition Overpressure / Sound Suppression (IOP/SS) system. The SLS Induced Environments (IE) technical discipline conducted a comprehensive evaluation of the design and as-tested performance of the IOP/SS water that will operate underneath both Boosters during the Artemis I launch. As part of this evaluation, flow rates and imagery from a number of integrated launch pad / mobile launcher IOP/SS flow tests were studied. Additional insight was leveraged from the Shuttle heritage IOP/SS system that includes data and imagery from a number of Flight Readiness Firings (FRF) and water flow tests. Lastly, the IE study included a qualitive comparison of the Shuttle and SLS systems to the equivalent water flow systems for Titan and Atlas V and determined that the NASA water flow systems are substantially different than those supporting other launch vehicles.

Ignition Overpressure↗

The role of multispectral scanners as data sources for EPA hydrologic models

An estimated cost savings of 30% to 50% was realized from using LANDSAT-derived data as input into a program which simulates hydrologic and water quality processes in natural and man-made water systems. Data from the satellite were used in conjunction with EPA's 11-channel multispectral scanner to obtain maps for characterizing the distribution of turbidity plumes in Flathead Lake and to predict the effect of increasing urbanization in Montana's Flathead River Basin on the lake's trophic state. Multispectral data are also being studied as a possible source of the parameters needed to model the buffering capability of lakes in an effort to evaluate the effect of acid rain in the Adirondacks. Water quality in Lake Champlain, Vermont is being classified using data from the LANDSAT and the EPA MSS. Both contact-sensed and MSS data are being used with multivariate statistical analysis to classify the trophic status of 145 lakes in Illinois and to identify water sampling sites in Appalachicola Bay where contaminants threaten Florida's shellfish.

Slack, R.↗

Jobos Bay Water Resources: Using Earth Observations to Analyze Shoreline Changes and Understand the Effects of Sea Level Rise in Southern Puerto Rico

Jobos Bay is located on the southern coast of Puerto Rico, which is known for intense hurricane seasons and increased seasonal storm surge. Scientists at Jobos Bay National Estuarine Research Reserve (JBNERR) are concerned that sea level rise will exacerbate coastal damage from these weather events. Using NASA Earth observations, our team analyzed coastal change, land use land cover change (LULC), mangrove forest extent, and water quality of Jobos Bay. Using Google Earth Engine, we evaluated coastal change and mangrove forest habitat within the study region by classifying NASA Earth observation imagery. We created historic LULC composite images to observe how land use changes over time and improve understanding of urbanization in the watershed. Leveraging previous water quality studies, our team compared water quality datasets generated by the Optical Reef and Coastal Area Assessment (ORCAA) tool to in situ sensors provided by JBNERR partners to understand the overall quality of water in the study area with respect to turbidity, chlorophyll-a, sea surface temperature, and colored dissolved organic matter (CDOM) concentrations. We discovered that 17% of the reserve has shifted from land to water since 1997 and lost 4.85 square kilometers of mangrove habitat over the past decade. Results from this study will inform the scientists of JBNERR and community members of the regional impacts of sea level rise. Being the first comprehensive study done in the estuary in nearly a decade, this serves as a baseline for future conservation efforts and research in the estuary.

Olivia Spencer↗

Radial–axial transport coordination enhances sugar translocation in the phloem vasculature of plants

Abstract Understanding mass transport of photosynthates in the phloem of plants is necessary for predicting plant carbon allocation, productivity, and responses to water and thermal stress. Several hypotheses about optimization of phloem structure and function and limitations of phloem transport under drought have been proposed and tested with models and anatomical data. However, the true impact of radial water exchange of phloem conduits with their surroundings on mass transport of photosynthates has not been addressed. Here, the physics of the Munch mechanism of sugar transport is re-evaluated to include local variations in viscosity resulting from the radial water exchange in two dimensions (axial and radial) using transient flow simulations. Model results show an increase in radial water exchange due to a decrease in sap viscosity leading to increased sugar front speed and axial mass transport across a wide range of phloem conduit lengths. This increase is around 40% for active loaders (e.g. crops) and around 20% for passive loaders (e.g. trees). Thus, sugar transport operates more efficiently than predicted by previous models that ignore these two effects. A faster front speed leads to higher phloem resiliency under drought because more sugar can be transported with a smaller pressure gradient.

58 GEOSCIENCES↗

Solar energy system performance evaluation. Seasonal report for Colt Pueblo, Pueblo, Colorado

The Colt-Pueblo solar energy system, designed to provide space heating and hot water preheating, is described and its operational performance for a 12 month period from February 1979 through January 1980 is evaluated. The space heating subsystem met 31 percent of the measured space heating load which was close to the expected 34 percent solar fraction. Although the hot water solar fraction was 79 percent, the overall energy saving capability was reduced because of the low hot water demand. The measured heating subsystem performance would have improved considerably if the uncontrolled losses primarily from transport piping could have been reduced to an inconsequential level. Fossil energy savings of 70.31 million BTUs are estimated.

Source record↗