SEARCH · Engineering Papers

Results for “vector fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Overview of Methods for Deriving the Radiative Transfer Theory from the Maxwell Equations. I: Approach Based on the Far-Field Foldy Equations

In this paper, we revisit, with further enhancements and clarifications, the self-consistent first-principles approach developed previously for deriving the vector radiative transfer theory for a discrete random medium with a sparse concentration of particles. We specifically consider the case of a plane-parallel particulate layer embedded in an otherwise homogeneous unbounded medium. The solution method is based on the far-field Foldy equations, an order-of-scattering expansion for the total field derived under the Twersky approximation, the computation of the coherent field by assuming that the positions of the particles are uncorrelated, and the ladder approximation for the coherency dyadic. The latter yields an integral equation for the diffuse specific coherency dyadic, defined through an angular spectrum repre- sentation for the coherency dyadic, which in turn, gives the vector radiative transfer equation for the diffuse specific intensity column vector. We analyze specifically the computation of the coherent field for inhomogeneous particulate media and multiple species of particles, the continuous extension of the far-field representation to the near field, the Foldy approximation, and the Foldy integral equation for the coherent field. Finally, we discuss the transition from the vector to the scalar radiative transfer equation.

Doicu, Adrian↗

DOE OSTI2023

W ± -boson production in p–Pb collisions at $ \sqrt{s_{\textrm{NN}}} $ = 8.16 TeV and Pb–Pb collisions at $ \sqrt{s_{\textrm{NN}}} $ = 5.02 TeV

The production of the W ± bosons measured in p–Pb collisions at a centre-of-mass energy per nucleon–nucleon collision $\sqrt{s_{NN}}$ = 8.16 TeV and Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with ALICE at the LHC is presented. The W ± bosons are measured via their muonic decay channel, with the muon reconstructed in the pseudorapidity region -4 < η$_{lab}^{μ}$ < -2.5 with transverse momentum p$_{T}^{μ}$ > 10 GeV/c. While in Pb–Pb collisions the measurements are performed in the forward (2.5 < y$_{cms}^{μ}$ < 4) rapidity region, in p–Pb collisions, where the centre-of-mass frame is boosted with respect to the laboratory frame, the measurements are performed in the backward (-4.46 < y$_{cms}^{μ}$ < -2.96) and forward (2.03 < y$_{cms}^{μ}$ < 3.53) rapidity regions. The W - and W + production cross sections, lepton-charge asymmetry, and nuclear modification factors are evaluated as a function of the muon rapidity. In order to study the production as a function of the p–Pb collision centrality, the production cross sections of the W - and W + bosons are combined and normalised to the average number of binary nucleon–nucleon collision $\langle$N coll $\rangle$. In Pb–Pb collisions, the same measurements are presented as a function of the collision centrality. Study of the binary scaling of the W ± -boson cross sections in p–Pb and Pb–Pb collisions is also reported. The results are compared with perturbative QCD calculations, with and without nuclear modifications of the Parton Distribution Functions (PDFs), as well as with available data at the LHC. Significant deviations from the theory expectations are found in the two collision systems, indicating that the measurements can provide additional constraints for the determination of nuclear PDFs and in particular of the light-quark distributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

In situ quantification of fracture slip induced by hydraulic injections in a deep borehole: A comparison of two different borehole techniques

In situ measurements of fracture deformation during fluid injection are rare, yet essential for understanding the mechanical response of fractured rock. In this study, we evaluate the reliability of two methods by comparing their slip vector estimates: high-resolution borehole acoustic televiewer images captured before and after injection tests, and displacement data from a three-component borehole deformation probe recorded during the injections. Acoustic televiewer images capture only final in-plane displacement, whereas three-component borehole deformation measurements provide full 3D, transient fracture movement. Four injection tests in a fractured granitic rock mass along an inclined borehole at the Bedretto Underground Laboratory (Switzerland), beneath more than 1100 m of overburden, were analyzed. The two methods yielded consistent kinematics and comparable slip magnitudes, typically in the range of 0.2 – 0.6 mm. Angular differences between estimated slip directions ranged from 0.2° to 28°. For two test intervals with pre-existing fractures optimally oriented for slip, the measured slip vectors agreed with forward-modeled slip vectors based on the regional in situ stress field, supporting the Wallace–Bott hypothesis. Measurable shear displacement was identified in two test intervals containing fractures oriented nearly perpendicular to the least principal stress, including a newly formed hydraulic fracture. This demonstrates that even fractures unfavorably oriented for slip can undergo shear due to local stress perturbations around an inclined borehole.

Acoustic televiewer↗

DOE OSTI2025

Self-Assembled Magnetic Nanoparticle Layers: Structural Control for Reconfigurable Magnetism and Functional Applications

We advance soft X-ray vector ptychographic tomography to map the 3D magnetization field in self-assembled superparamagnetic nanoparticles at a liquid–liquid interface, revealing how layered structures influence magnetic ordering. We observe that monolayers with low coordination numbers exhibit weak magnetic order, with magnetic vortices disrupting spin alignment. In contrast, bilayers and trilayers with higher coordination numbers display long-range magnetic order with strong spin correlations across larger distances and a suppression of magnetic vortices. We further quantify the average distance for vortex–antivortex pairs as 26.0 ± 2.0 nm, while vortex–vortex and antivortex–antivortex pairs exhibit larger separations, averaging 44.9 ± 5.2 and 54.1 ± 7.4 nm, respectively. These experimental results are supported by micromagnetic Monte Carlo simulations. Our findings illustrate how layered structures enhance magnetic order and spin correlation in superparamagnetic nanoparticle assemblies, providing a promising approach for tuning magnetic properties in applications such as data storage, microrobotics, and biomedicine.

Lu, Xingyuan↗

DOE OSTI2025

Tip-based proximity ferroelectric switching and piezoelectric response in wurtzite multilayers

Proximity ferroelectricity is a paradigm for inducing ferroelectricity when a nonferroelectric polar material (such as Al⁢ N), which is unswitchable with an external field below the dielectric breakdown field, becomes a practically switchable ferroelectric in direct contact with a thin switchable ferroelectric layer (such as Al 1−𝑥 ⁢Sc 𝑥 ⁢N). Here, we develop a Landau-Ginzburg-Devonshire approach to study the proximity effect of local piezoelectric response and polarization reversal in wurtzite ferroelectric multilayers under a sharp electrically biased tip. Using finite-element modeling, we analyze the probe-induced nucleation of nanodomains, the features of local polarization hysteresis loops and coercive fields in the Al 1−𝑥 ⁢Sc 𝑥 ⁢N/Al⁢ N bilayers and three-layers. Similar to the wurtzite multilayers sandwiched between two parallel electrodes, the regimes of “proximity switching” (when all layers collectively switch) and the regime of “proximity suppression” (when they collectively do not switch) are the only two possible regimes in the probe-electrode geometry. However, the parameters and asymmetry of the local piezoresponse and polarization hysteresis loops depend significantly on the sequence of the layers with respect to the probe. The physical mechanism of proximity ferroelectricity in the local probe geometry is a depolarizing electric field determined by the polarization of the layers and their relative thickness. The field, whose direction is opposite to the polarization vector in the layer(s) with the larger spontaneous polarization (such as Al⁢ N), renormalizes the double-well ferroelectric potential to lower the steepness of the switching barrier in the “otherwise unswitchable” polar layers. Tip-based control of domains in otherwise nonferroelectric layers using proximity ferroelectricity can provide nanoscale control of domain reversal in memory, actuation, sensing, and optical applications. The ability of the tip-induced proximity switching to differentially switch multilayers, based on the order of the layers, provides a powerful tool for selective domain engineering.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Chiral magnetism: a geometric perspective

We discuss a geometric perspective on chiral ferromagnetism. Much like gravity becomes the effect of spacetime curvature in theory of relativity, the Dzyaloshinski-Moriya interaction arises in a Heisenberg model with nontrivial spin parallel transport. The Dzyaloshinskii-Moriya vectors serve as a background SO(3) gauge field. In 2 spatial dimensions, the model is partly solvable when an applied magnetic field matches the gauge curvature. At this special point, solutions to the Bogomolny equation are exact excited states of the model. We construct a variational ground state in the form of a skyrmion crystal and confirm its viability by Monte Carlo simulations. The geometric perspective offers insights into important problems in magnetism, e.g., conservation of spin current in the presence of chiral interactions.

Hill, Daniel↗

NASA NTRS1972

Spectral-line structures of saturated parametric instabilities.

The nonlinear saturation spectrum of parametric instabilities is shown to be restricted to discrete values of the propagation vector if spontaneous emission is neglected and a one-dimensional analysis is used. The purely growing instability is not excited for equal ion and electron temperatures if the power is less than 3.5 times the threshold power. The inadequacy of the present one-dimensional treatment is pointed out, and it is shown that waves with propagation vectors that are not parallel to the pump field must be present even if spontaneous emission is neglected.

Kuo, Y.-Y.↗

NASA NTRS1977

Parallel computation of unsteady, three-dimensional, chemically reacting, nonequilibrium flow using a time-split finite-volume method on the Illiac IV

A description is presented of the split finite-volume method which is a viable numerical procedure for performing with the aid of a modern special purpose vector computer numerical simulation studies of complicated flow fields, including chemical reactions, about geometrically complex bodies. Such numerical studies are needed for the development of atmospheric entry vehicles such as the space shuttle. The equations which are approximated are quite general and can be used in studies of combustion, pollution, and other chemically reacting flow phenomena, where convective transport effects dominate the influence of radiative, viscous, and other transport mechanisms. The shock perturbed flow about a shuttle orbiter flying at a large angle of attack during atmospheric entry is illustrated. The method uses a time splitting of the convection differencing operator to achieve efficient data management.

Reinhardt, W. A.↗

NASA NTRS1982

A new numerical method for the simulation of three dimensional flow in a pipe

A new numerical technique for simulating three dimensional, unsteady, incompressible pipe flows is presented and its utility and accuracy is shown. Each vector function in the expansion of the velocity field is divergence free and satisfies the boundary conditions for viscous flow. Some of the benefits of the expansion technique are that pressure is eliminated from the dynamics, only two unknowns per mesh point are required, implicit treatment of the viscous terms is provided at no extra computational cost, and no fractional time steps are required. The method uses spectral expansions: Fourier series in the azimuthal and streamwise directions, and Jacobi polynominals in the radial direction.

Leonard, A.↗

NASA NTRS1982

A new numerical method for the simulation of three-dimensional flow in a pipe

Leonard, A.↗

NASA NTRS1993

Improved determination of vector lithospheric magnetic anomalies from MAGSAT data

Scientific contributions made in developing new methods to isolate and map vector magnetic anomalies from measurements made by Magsat are described. In addition to the objective of the proposal, the isolation and mapping of equatorial vector lithospheric Magsat anomalies, isolation of polar ionospheric fields during the period were also studied. Significant progress was also made in isolation of polar delta(Z) component and scalar anomalies as well as integration and synthesis of various techniques of removing equatorial and polar ionospheric effects. The significant contributions of this research are: (1) development of empirical/analytical techniques in modeling ionospheric fields in Magsat data and their removal from uncorrected anomalies to obtain better estimates of lithospheric anomalies (this task was accomplished for equatorial delta(X), delta(Z), and delta(B) component and polar delta(Z) and delta(B) component measurements; (2) integration of important processing techniques developed during the last decade with the newly developed technologies of ionospheric field modeling into an optimum processing scheme; and (3) implementation of the above processing scheme to map the most robust magnetic anomalies of the lithosphere (components as well as scalar).

Ravat, Dhananjay↗

NASA NTRS1994

Visualization of Secondary Flow Development in High Aspect Ratio Channels with Curvature

The results of an experimental project to visually examine the secondary flow structure that develops in curved, high aspect-ratio rectangular channels are presented. The results provide insight into the fluid dynamics within high aspect ratio channels. A water flow test rig constructed out of plexiglass, with an adjustable aspect ratio, was used for these experiments. Results were obtained for a channel geometry with a hydraulic diameter of 10.6 mm (0.417 in.), an aspect ratio of 5.0, and a hydraulic radius to curvature radius ratio of 0.0417. Flow conditions were varied to achieve Reynolds numbers up to 5,100. A new particle imaging velocimetry technique was developed which could resolve velocity information from particles entering and leaving the field of view. Time averaged secondary flow velocity vectors, obtained using this velocimetry technique, are presented for 30 degrees, 60 degrees, and 90 degrees into a 180 degrees bend and at a Reynolds number of 5,100. The secondary flow results suggest the coexistence of both the classical curvature induced vortex pair flow structure and the eddies seen in straight turbulent channel flow.

Meyer, Michael L.↗

NASA NTRS1995

On pseudosupersymmetric oscillators and reality of relativistic energies for vector mesons

Specific oscillators - hereafter called pseudosupersymmetric oscillators - appear as interesting nonrelativistic concepts in connection with the study of relativistic vector mesons interacting with an external constant magnetic field when the real character of the energy eigenvalues is required as expected. A new pseudosupersymmetric quantum mechanics can then be developed and the corresponding pseudosupersymmetries can be pointed out.

Beckers, Jules↗

NASA NTRS1993

Equatorial spacecraft-plasma interaction phenomenon observed with DE 2

Data from the retarding potential analyzer and ion drift meter on Dynamics Explorer 2 indicate that an unusual spacecraft-plasma interaction phenomemon occurs at times when the spacecraft velocity vector becomes nearly aligned with the local geomagnetic field lines. The primary signature of the interaction is a transient increase in the ion collection currents obtained with these instruments, up to approximately 15% in magnitude and typically a few tens of seconds duration. This signature is indicative of an increase in the net ion and electron currents to the satellite and is accompanied by a small positive increase in the spacecraft potential relative to the plasma. We present here a case study covering six of the strongest such events observed with DE 2 and discuss a possible physical mechanism. We suggest in particular that what might be called a collisional electron 'snowplow' effect may be occurring, and we derive a simple numerical model based on this scenario. Least squares fitting is employed to test the model and to derive new estimates of the ambient ion concentration at times when the measurements are being perturbed by the interaction.

Cragin, B. L.↗

NASA NTRS1996

High Temperature Superconducting Magnets with Active Control for Attraction Levitation Transport Applications

A research program, involving 3 British universities, directed at quantifying the controllability of High Temperature Superconducting (HTS) magnets for use in attraction levitation transport systems will be described. The work includes measurement of loss mechanisms for iron cored HTS magnets which need to produce a flux density of approx. 1 tesla in the airgap between the magnet poles and a ferromagnetic rail. This flux density needs to be maintained and this is done by introducing small variations of the magnet current using a feedback loop, at frequencies up to 10 Hz to compensate for load changes, track variation etc. The test magnet assemblies constructed so far will be described and the studies and modelling of designs for a practical levitation demonstrator (using commercially obtained HTS tape) will be discussed with particular emphasis on how the field distribution and its components, e.g., the component vector normal to the broad face of the tape, can radically affect design philosophy compared to the classical electrical engineering approach. Although specifically aimed at levitation transport the controllability data obtained have implications for a much wider range of applications.

Jones, Harry↗

NASA NTRS1993

Equatorial Spacecraft-Plasma Interaction Phenomenon Observed With DE 2

Data from the retarding potential analyzer and ion drift meter on Dynamics Explorer 2 indicate that an unusual spacecraft-plasma interaction phenomenon occurs at times when the spacecraft velocity vector becomes nearly aligned with the local geomagnetic field lines. The primary signature of the interaction is a transient increase in the ion collection currents obtained with these instruments, up to approximately 15% in magnitude and typically a few tens of seconds duration. This signature is indicative of an increase in the net ion and electron currents to the satellite and is accompanied by a small positive increase in the spacecraft potential relative to the plasma. We present here a case study covering six of the strongest such events observed with DE 2 and discuss a possible physical mechanism. We suggest in particular that what might be called a collisional electron snowplow effect may be occurring, and we derive a simple numerical model based on this scenario. Least squares fitting is employed to test the model and to derive new estimates of the ambient ion concentration at times when the measurements are being perturbed by the interaction.

Cragin, B. L.↗

NASA NTRS1999

Low Temperature Photoluminescence of PVT Grown ZnSe and ZnSeTe

ZnSe and ZnSeTe single crystals were grown by physical vapor transport (PVT) technique horizontally and vertically. The grown ZnSe and ZnSeTe single crystals were characterized by low temperature photoluminescence at 5 to 10 K using the 3.4 eV emission of an argon laser. The intensity of the sharp near band edge defect lines at 2.799, 2.783 eV and the intrinsic free exciton line at 2.802 eV were mapped on various crystal surfaces with different orientations to the gravitational field. The results show the effects of gravity vector orientation on the defect segregation. Comparison of the photoluminescence spectra of the ZeSe crystal before and after annealing in the Zn vapor shows that the 2.783 eV line of ZnSe crystal is related to the zinc vacancy. The photoluminescence spectra of the ternary ZnSeTe crystal were characterized by a single broad band from 2.2 to 2.4 eV, with a Full Width at Half Maximum (FWHM) of about 100 meV. The temperature dependence of the peak position and intensity were determined from 7 to 150 K.

Wang, Ling Jun↗

NASA NTRSDate not supplied

Camera Calibration and Alignment Metrology at Johnson Space Center’s Electro-Optics Laboratory

It is increasingly common to see spacecraft equipped with cameras for the purpose of navigation. Images are either sent to Earth or processed autonomously on-board to provide information about the vehicle’s position, velocity, and/or attitude. These can be images of stars or celestial bodies for absolute navigation, or images of another spacecraft for relative navigation. While monocular cameras do not provide range information, the images they capture can be processed to determine bearing vectors to target objects within the camera’s field of view. For a camera to be effective in navigation, it must be carefully calibrated and aligned. This involves accurately modeling the optical effects that govern the projection of line-of-sight directions onto the camera’s pixels and determining the camera’s orientation relative to the spacecraft’s reference frame. Engineers at Johnson Space Center’s Electro-Optics Lab regularly perform camera inspection, calibration, and alignment metrology. This was done for the Orion Optical Navigation (OpNav) Camera, the Orion Docking Camera (DCAM), and for numerous cameras belonging to commercial partners. The nature of optical navigation means that cameras must be well-calibrated and their attitude well understood to provide high accuracy bearing measurements to the navigation filter. The stringent accuracy requirements for Orion could not have been met using traditional checkerboard camera calibration or by simply relying on design drawings. This paper details the hardware, software, techniques, and algorithms used by the EOL team to achieve this level of accuracy.

Paul D Mckee↗