Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strong motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Radar, an optimum remote-sensing tool for detailed plate tectonic analysis and its application to hydrocarbon exploration (an example in Irian Jaya Indonesia)

Geometric, geomorphic, and structural information derived from the examination of radar imagery and combined with geologic and geophysical evidences strongly indicates that Salawati Island was attached to the Irian Jaya mainland during the time of Miocene lower Pliocene reef development, and that it was separated in middle Pliocene to Pleistocene time, opening the Sele Strait rift zone. The island moved 17.5 km southwestward after an initial counterclockwise rotation of 13 deg. The rift zone is subsequent to the creation of the large left lateral Sorong fault zone that is part of the transitional area separating the westward-moving Pacific plate from the relatively stable Australian plate. The motion was triggered during a widespread magmatic intrusion of the Sorong fault zone, when the basalt infiltrated a right lateral fault system in the area of the present Sele Strait.

Froidevaux, C. M.↗

A geopotential model from satellite tracking, altimeter, and surface gravity data: GEM-T3

An improved model of Earth's gravitational field, Goddard Earth Model T-3 (GEM-T3), has been developed from a combination of satellite tracking, satellite altimeter, and surface gravimetric data. GEM-T3 provides a significant improvement in the modeling of the gravity field at half wavelengths of 400 km and longer. This model, complete to degree and order 50, yields more accurate satellite orbits and an improved geoid representation than previous Goddard Earth Models. GEM-T3 uses altimeter data from GEOS 3 (1975-1976), Seasat (1978) and Geosat (1986-1987). Tracking information used in the solution includes more than 1300 arcs of data encompassing 31 different satellites. The recovery of the long-wavelength components of the solution relies mostly on highly precise satellite laser ranging (SLR) data, but also includes Tracking Network (TRANET) Doppler, optical, and satellite-to-satellite tracking acquired between the ATS 6 and GEOS 3 satellites. The main advances over GEM-T2 (beyond the inclusion of altimeter and surface gravity information which is essential for the resolution of the shorter wavelength geoid) are some improved tracking data analysis approaches and additional SLR data. Although the use of altimeter data has greatly enhanced the modeling of the ocean geoid between 65 deg N and 60 deg S latitudes in GEM-T3, the lack of accurate detailed surface gravimetry leaves poor geoid resolution over many continental regions of great tectonic interest (e.g., Himalayas, Andes). Estimates of polar motion, tracking station coordinates, and long-wavelength ocean tidal terms were also made (accounting for 6330 parameters). GEM-T3 has undergone error calibration using a technique based on subset solutions to produce reliable error estimates. The calibration is based on the condition that the expected mean square deviation of a subset gravity solution from the full set values is predicted by the solutions' error covariances. Data weights are iteratively adjusted until this condition for the error calibration is satisfied. In addition, gravity field tests were performed on strong satellite data sets withheld from the solution (thereby ensuring their independence). In these tests, the performance of the subset models on the withheld observations is compared to error projections based on their calibrated error covariances. These results demonstrate that orbit accuracy projections are reliable for new satellites which were not included in GEM-T3.

Lerch, F. J.↗

Characteristics of Kinematics of a Coronal Mass Ejection During the 2010 August 1 CME-CME Interaction Event

We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field-of-view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile of the faster CME (CME2; (is) approximately 1200 km s−1) shows a strong deceleration over the distance range at which it reaches the slower, preceding CME (CME1; (is) approximately 700 km s−1). By applying a drag-based model we are able to reproduce the kinematical profile of CME2 suggesting that CME1 represents a magnetohydrodynamic obstacle for CME2 and that, after the interaction, the merged entity propagates as a single structure in an ambient flow of speed and density typical for quiet solar wind conditions. Observational facts show that magnetic forces may contribute to the enhanced deceleration of CME2. We speculate that the increase in magnetic tension and pressure, when CME2 bends and compresses the magnetic field lines of CME1, increases the efficiency of drag.

HI data↗

Pitfalls in the n -mode representation of vibrational potentials

Simulations of anharmonic vibrational motion rely on computationally expedient representations of the governing potential energy surface. The n-mode representation (n-MR)—effectively a many-body expansion in the space of molecular vibrations—is a general and efficient approach that is often used for this purpose in vibrational self-consistent field (VSCF) calculations and correlated analogues thereof. In the present analysis, a lack of convergence in many VSCF calculations is shown to originate from negative and unbound potentials at truncated orders of the n-MR expansion. For cases of strong anharmonic coupling between modes, the n-MR can both dip below the true global minimum of the potential surface and lead to effective single-mode potentials in VSCF that do not correspond to bound vibrational problems, even for bound total potentials. The present analysis serves mainly as a pathology report of this issue. Furthermore, this insight into the origin of VSCF non-convergence provides a simple, albeit ad hoc, route to correct the problem by “painting in” the full representation of groups of modes that exhibit these negative potentials at little additional computational cost. Somewhat surprisingly, this approach also reasonably approximates the results of the next-higher n-MR order and identifies groups of modes with particularly strong coupling. The method is shown to identify and correct problematic triples of modes—and restore SCF convergence—in two-mode representations of challenging test systems, including the water dimer and trimer, as well as protonated tropine.

Chemistry↗

Current-Sensitive Path Planning for an Underactuated Free-Floating Ocean Sensorweb

This work investigates multi-agent path planning in strong, dynamic currents using thousands of highly under-actuated vehicles. We address the specific task of path planning for a global network of ocean-observing floats. These submersibles are typified by the Argo global network consisting of over 3000 sensor platforms. They can control their buoyancy to float at depth for data collection or rise to the surface for satellite communications. Currently, floats drift at a constant depth regardless of the local currents. However, accurate current forecasts have become available which present the possibility of intentionally controlling floats' motion by dynamically commanding them to linger at different depths. This project explores the use of these current predictions to direct float networks to some desired final formation or position. It presents multiple algorithms for such path optimization and demonstrates their advantage over the standard approach of constant-depth drifting.

oceanography↗

On Doppler Shift and Its Center-To-Limb Variation in Active Regions in the Transition Region

A comprehensive understanding of the structure of Doppler motions in the transition region including the center-to-limb variation and its relationship with the magnetic field structure is vital for the understanding of mass and energy transfer in the solar atmosphere. In this paper, we have performed such a study in an active region using the Si IV 1394 Å emission line recorded by the Interface Region Imaging Spectrograph and the line-of-sight photospheric magnetic field obtained by the Helioseismic and Magnetic Imager onboard the Solar Dynamics Observatory. The active region has two opposite polarity strong field regions separated by a weak field corridor, which widened as the active region evolved. On average, the strong field regions (corridor) show(s) redshifts of 5–10 (3–9) km s(exp -1) (depending on the date of observation). There is, however, a narrow lane in the middle of the corridor with near-zero Doppler shifts at all disk positions, suggesting that any flows there are very slow. The Doppler velocity distributions in the corridor seem to have two components—a low velocity component centered near 0 km s(exp -1) and a high-velocity component centered near 10 km s(exp -1). The high-velocity component is similar to the velocity distributions in the strong field regions, which have just one component. Both exhibit a small center-to-limb variation and seem to come from the same population of flows. To explain these results, we suggest that the emission from the lower transition region comes primarily from warm type II spicules, and we introduce the idea of a “chromospheric wall”—associated with classical cold spicules—to account for a diminished center-to-limb variation.

Ghosh, Avyarthana↗

Summary of studies for a solar optical telescope in space: 1968-1976

The primary objective of this review is to tabulate the basic recommendations of several solar telescope studies. A primary matrix, listing some of the basic optical parameters, was compiled and forms the basis for a table. From this table it is apparent that a strong consensus exists on the configuration of the telescope and on its fundamental dimensionless parameters. Other tables presented in this document address the basic approach of each study to the telescope design as well as to the design of critical subsystems. These subsystem problems include the material, coating, configuration, mounting, launch locks, and thermal control of the primary mirror, the structure of the main telescope and the instrument bay, the mechanisms for radiation rejection, thermal control, and meteoroid shielding, and methods of maintaining image quality by proper alignment and by image motion compensation.

Bremer, J.↗

A dynamic analysis of the motion of a low-wing general aviation aircraft about its calculated equilibrium flat spin mode

The properties of the flat spin mode of a general aviation configuration have been studied through analysis of rotary balance data, numerical simulation, and analytical study of the equilibrium state. The equilibrium state is predicted well from rotary balance data. The variations of yawing moment and pitching moment as functions of sideslip have been shown to be of great importance in obtaining accurate modeling. These dependencies are not presently available with sufficient accuracy from previous tests or theories. The stability of the flat spin mode has been examined extensively using numerical linearization, classical perturbation methods, and reduced order modeling. The stability exhibited by the time histories and the eigenvalue analyses is shown to be strongly dependent on certain static cross derivatives and more so on the dynamic derivatives. Explicit stability criteria are obtained from the reduced order models.

Tischler, M. B.↗

On the anticorrelation of the electric field and peak electron energy within an auroral arc

The present investigation is concerned with an example of a strongly anticorrelated electric field and particle precipitation, taking into account an application of an extended version of the model of Evans et al. (1977) to the data. A striking feature of the data reported is the high degree of anticorrelation between electric field strength and peak precipitating electron energy. A simple model consisting of a constant current traversing a region in which the conductivities increase in proportion to ionospheric energy deposition provides a qualitative explanation of the observations. However, when the effects of neutral winds, ionization transport, Hall currents, and arc motion, and the nonlinearity of the relationship between peak precipitating electron energy and equilibrium are considered, the conclusions become less clear.

Mallinckrodt, A. J.↗

Determination of Non-Thermal Velocity Distributions from SERTS Linewidth Observations

Non-thermal velocities obtained from the measurement of coronal Extreme Ultraviolet (EUV) linewidths have been consistently observed in solar EUV spectral observations and have been theorized to result fro m many plausible scenarios including wave motions, turbulence, or magnetic reconnection. Constraining these velocities can provide a physical limit for the available energy resulting from unresolved motions in the corona. We statistically determine a series of non-thermal velocity distributions from linewidth measurements of 390 emission lines from a wide array of elements and ionization states observed during the Solar Extreme Ultraviolet Research Telescope and Spectrograph 1991-1997 flights covering the spectral range 174-418 A and a temperature range from 80,000 K to 12.6 MK. This sample includes 248 lines from active regions, 101 lines from quiet-Sun regions, and 41 lines were observed from plasma off the solar limb. We find a strongly peaked distribution corresponding to a non-thermal velocity of 19-22 km/s in all three of the quiet-Sun, active region, and off-limb distributions. For the possibility of Alfven wave resonance heating, we find thai velocities in the core of these distributions do not provide sufficient energy, given typical densities and magnetic field strengths for the coronal plasma, to overcome the estimated coronal energy losses required to maintain the corona at the typical temperatures working as the sole mechanism. We find that at perfect efficiency 50%-60% of the needed energy flux can be produced from the non-thermal velocities measured.

Coyner, Aaron J.↗

Comparing Flood-Producing Catastrophic Hurricanes in GEOS: A Study of Juan 1985 and Harvey 2017

Hurricanes Juan (1985) and Harvey (2017) bear remarkable similarities because of the exceptional amount of accumulated precipitation over coastal regions in the Gulf, consequent to the peculiar and rare situation in which a hurricane stalls for several days on a coastal area, displaying minimal progress. This is particularly dangerous because: a) terrestrial drag affect only part of the circulation so that weakening is not as fast as when there is rapid motion inland; b) a part of the circulation remains over water and as such low-level moisture flux convergence is maintained; c) precipitation lasts for a very long time over the same area; d) moisture recycling from flooded areas further contributes to maintaining flood conditions. From the forecast perspective, hurricanes with track singularities such as stalling points, loops, or multiple landfalls over the same region are exceptionally difficult to predict because they result from small variations of opposing mechanisms and are therefore intrinsically unstable. Intensity fluctuations and track singularities are strongly coupled. The representation of fluxes undergoing differential drag (ocean vs. land) inside the same circulation is critically dependent upon resolution. Recent modeling development efforts within the NASA Global Modeling and Assimilation Office (GMAO) have brought the horizontal resolution of the global cubed-sphere Goddard Earth Observing System (GEOS) atmospheric model down to 12 km. This has led to innovative findings in the field of tropical cyclone (TC) modeling within a global framework. The GEOS atmospheric model and data assimilation system (DAS), used to produce the MERRA-2 (Modern Era Retrospective analysis for Research and Applications) reanalysis, has a "Replay" capability that adds a forcing term to the model equations to constrain it to follow a specified trajectory. This capability is used to produce global, downscaled versions of the 50 km MERRA-2 reanalysis at a 12.5 km resolution. The full DAS and replay modes both use the Incremental Analysis Update or IAU for applying an analysis increment to the model's background state four times each day at 00Z, 06Z, 12Z and 18Z. In a full DAS mode, a six-hour free run of the model is made (Predictor Step), writing states that will be used as backgrounds or first-guesses for the analysis centered on 00Z. The Analysis system then produces its best estimate of the 00Z state by blending backgrounds with observations. The difference between this best estimate and the model's original first guess at 00Z is treated as an analysis increment and added uniformly as a forcing term to the model during a second, now forced, run of the 12Z to 03Z window, which produces the assimilated results. Replay mode is very similar, except only the 00Z background is needed from the predictor segment, which is thus half as long, and instead of doing an analysis, a previously analyzed state at 00Z is read in. The increment is then computed and applied to the corrector step in the same way as in the original DAS. When downscaling horizontal spatial filters can be applied to the "analysis" increment used to force the Corrector step, so as to reproduce the full meteorological state or selectively choose or discard certain forcings. In this presentation, full global hindcast simulations of Juan and operational forecasts of Harvey are compared.

Flooding↗

Mini-Channel Flow Boiling in 1g and μg

Subcooled flow boiling combines complex processes governed by a strong coupling of heat and mass transfer, hydrodynamics, and liquid-vapor transitions. The gravitational body force plays an important role in these processes. By exploiting the latent heat of vaporization, subcooled flow boiling can transfer up to several orders-of-magnitude more heat compared to forced liquid flow. It is widely used in Earth-based thermal equipment to reduce the cost, size, and power required to move heat. Subcooled flow boiling is now considered a promising technology for space applications since it offers a means to control the motion of bubbles near the heated surface and thereby enhance nucleate boiling. However, a lack of data and predictive models on the role that gravity plays in these phenomena hinders the use of flow boiling in a microgravity environment. We will present results of experiments on transients in nucleate boiling that were carried out in the Flow Boiling Module (FBM) on the International Space Station (ISS). The unique ISS FBM ability is to couple large heat loads with flow visualization in testing flow boiling under strict control of experimental conditions in long-duration microgravity. Comparison of results of microgravity experiments with data obtained in a similar setup on the NASA GRC demonstrates the role of gravity in nucleate boiling. The work is supported by the NASA Flight Opportunities program (grant 80NSSC21K0501) and NSF/CASIS program (NSF CBET grants 1832260, 2126461, 2126462).

Two-phase flow and phase transition↗

Microwave measurements of the high magnetic field vortex motion pinning parameters in Nb$_3$Sn

The high frequency vortex motion in Nb3Sn was analyzed in this work up to 12 T. We used a dielectric loaded resonator tuned at 15 GHz to evaluate the surface impedance Z of a Nb3Sn bulk sample (24.8 at.%Sn). From the field induced variation of Z, the high frequency vortex parameters (the pinning constant k p , the depinning frequency ν p and the flux flow resistivity ρ ff ) were obtained over a large temperature and field range; their field and temperature dependencies were analyzed. Comparison with other superconducting materials shows that high frequency applications in strong magnetic fields are also feasible with Nb3Sn. In the present work, we report the first measurements about the microwave response in Nb3Sn in strong magnetic fields.

Alimenti, Andrea↗

Vibration and flutter of mistuned bladed-disk assemblies

An analytical model for investigating vibration and flutter of mistuned bladed disk assemblies is presented. This model accounts for elastic, inertial and aerodynamic coupling between bending and torsional motions of each individual blade, elastic and inertial couplings between the blades and the disk, and aerodynamic coupling among the blades. The disk was modeled as a circular plate with constant thickness and each blade was represented by a twisted, slender, straight, nonuniform, elastic beam with a symmetric cross section. The elastic axis, inertia axis, and the tension axis were taken to be noncoincident and the structural warping of the section was explicitly considered. The blade aerodynamic loading in the subsonic and supersonic flow regimes was obtained from two-dimensional unsteady, cascade theories. All the possible standing wave modes of the disk and traveling wave modes of the blades were included. The equations of motion were derived by using the energy method in conjunction with the assumed mode shapes for the disk and the blades. Continuities of displacement and slope at the blade-disk junction were maintained. The equations were solved to investigate the effects of blade-disk coupling and blade frequency mistuning on vibration and flutter. Results showed that the flexibility of practical disks such as those used for current generation turbofans did not have a significant influence on either the tuned or mistuned flutter characteristics. However, the disk flexibility may have a strong influence on some of the system frequencies and on forced response.

Kaza, K. R. V.↗

Vibration and flutter of mistuned bladed-disk assemblies

An analytical model for investigating vibration and flutter of mistuned bladed disk assemblies is presented. This model accounts for elastic, inertial and aerodynamic coupling between bending and torsional motions of each individual blade, elastic and inertial couplings between the blades and the disk, and aerodynamic coupling among the blades. The disk was modeled as a circular plate with constant thickness and each blade was represented by a twisted, slender, straight, nonuniform, elastic beam with a symmetric cross section. The elastic axis, inertia axis, and the tension axis were taken to be noncoincident and the structural warping of the section was explicitly considered. The blade aerodynamic loading in the subsonic and supersonic flow regimes was obtained from two-dimensional unsteady, cascade theories. All the possible standing wave modes of the disk and traveling wave modes of the blades were included. The equations of motion were derived by using the energy method in conjunction with the assumed mode shapes for the disk and the blades. Continuities of displacement and slope at the blade-disk junction were maintained. The equations were solved to investigate the effects of blade-disk coupling and blade frequency mistuning on vibration and flutter. Results showed that the flexibility of practical disks such as those used for current generation turbufans did not have a significant influence on either the tuned or mistuned flutter characteristics. However, the disk flexibility may have a strong influence on some of the system frequencies and on forced response.

Rao, K.↗

Laser light scattering review

Since the development of laser light sources and fast digital electronics for signal processing, the classical discipline of light scattering on liquid systems experienced a strong revival plus an enormous expansion, mainly due to new dynamic light scattering techniques. While a large number of liquid systems can be investigated, ranging from pure liquids to multicomponent microemulsions, this review is largely restricted to applications on Brownian particles, typically in the submicron range. Static light scattering, the careful recording of the angular dependence of scattered light, is a valuable tool for the analysis of particle size and shape, or of their spatial ordering due to mutual interactions. Dynamic techniques, most notably photon correlation spectroscopy, give direct access to particle motion. This may be Brownian motion, which allows the determination of particle size, or some collective motion, e.g., electrophoresis, which yields particle mobility data. Suitable optical systems as well as the necessary data processing schemes are presented in some detail. Special attention is devoted to topics of current interest, like correlation over very large lag time ranges or multiple scattering.

Schaetzel, Klaus↗

East–West Proton Flux Anisotropy Observed with the PAMELA Mission

We present a study of the east–west anisotropy of trapped-proton fluxes in low-Earth orbit based on the measurements of the Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics(PAMELA)experiment. The differential intensities of eastward- and westward-traveling protons detected in the South Atlantic Anomaly region were estimated as a function of equatorial pitch angle and drift shell, for six energy bins between80 MeV and 2 GeV. We found that, as a consequence of the strong atmospheric gradient coupled with the large gyro radius in this energy range, the intensities of eastward fluxes exceed those of westward fluxes by a factor of∼10–20. However, the reported directional asymmetry also depends on the sign of the local flux gradient, resulting in more intense westward fluxes beyond the radial distances where the inner belt peaks. PAMELA observations can be used to improve the description of the near-Earth radiation environment at lowest altitudes and highest trapping energies, where current theoretical and empirical models are affected by the largest uncertainties. Unified Astronomy Thesaurus concepts: Cosmic rays(329);Van Allen radiation belts(1758)1. Introduction Low-altitude inner-belt protons are strongly influenced by the density distribution of Earth’s atmosphere, mostly through interactions with its neutral constituents, which induce significant flux anisotropies. In prim is, the atmospheric loss cone results in a steep pitch-angle distribution, which becomes narrower for lower drift shells. A further, azimuthal anisotropy originates from finite gyro radius effects at proton energies in excess of a few tens of MeV(Haerendel1962; Lenchek & Singer1962). In fact, for a given spacecraft position, protons with the same pitch angle but different gyro phase—the azimuth angle associated with the gyration motion—have their guiding centers on different drift shells. In particular, protons from the west and from the east gyrate around magnetic field lines located at higher and lower altitudes, respectively. The guiding-center separationΔhincreaseswith increasing energy, so that protons moving eastward will encounter progressively lower drift-averaged densities, thus experiencing less atmospheric absorption; the opposite situation will occur for protons traveling westward, resulting in an east–west asymmetry of flux intensities whenΔhbecomes comparable to or larger than the flux scale height(Garmire1963; Heckman &Nakano1963).The trapped-flux anisotropy is a relevant aspect of the modeling of the low Earth orbit(LEO)radiation environment, given the significant engineering implications, especially for The Astrophysical Journal,919:114(6pp), 2021 October 1https://doi.org/10.3847/1538-4357/ac1677© 2021. The American Astronomical Society.

A. Bruno↗

Structural modeling and dynamic analysis of condensate storage tanks in nuclear power plants

Condensate storage tanks (CSTs) in nuclear power plants (NPPs) are classified as critical equipment capable of surviving strong shaking in a design basis earthquake to assure the ability to subsequently provide cooling water. Structural modeling and dynamic analysis of CSTs are complicated due to fluid-structure interaction (FSI) and coupling issues, which could have significant effects on seismic response. The capability of a number of approximate models to capture seismic response is investigated using dynamic analysis results from detailed finite element models. Modal analyses and time history analyses are carried out using both 2D and 3D models to predict the dynamic behavior of CSTs as a function of ground motion intensity. Although 2D simplified models can be used to quickly evaluate the dynamic response of CSTs when there is substantial margin to failure, a detailed 3D model is required when it is necessary to examine a limit state associated with the failure mode of the tank. The findings show good agreement between the natural frequencies of convective modes determined from the 2D and 3D CST models. The difference between the frequencies of impulsive modes were found to be equal to or less than 25%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗