Cryogenic technology base for space shuttle
Cryogenic technology application to space shuttle propulsion and power systems
Winstead, T. W.↗
SEARCH · Engineering Papers
Results for “space based”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The numerical solution of convective heat transfer in the space shuttle base region by Telenin's method
Explore the source record for details and available documents.
Meng, J. C. S.↗
Intercomparison of ground-based and space solar flux measurements
Detailed temporal measurements of the solar flux at one location are performed. These data are then analyzed and compared to the potential of space measurements which allow one to consider the flux falling on areas of the earth. An important result of the research is that the temporal characteristics of the flux in the presence of a real atmosphere would be difficult to obtain from space and that the variations in the flux can be highly significant in regard to most solar conversion schemes. The detailed results of the research are presented. The instruments developed to separate the direct and scattered solar flux, the computer analysis methods developed, and the results of the research, presented as both graphical and tabular data, are discussed.
Meinel, A. B.↗
A command and data subsystem for deep space exploration based on the RCA 1802 microprocessor in a distributed configuration
The Command and Data Subsystem (CDS) is an RCA 1802microprocessor based subsystem that acts as the central nervous system for the Galileo Orbiter Spacecraft. All communication between the ground and spacecraft flows through the CDS. The CDS also distributes commands in real time, algorithmetrically expanded from a data base loaded from the ground and in response to spacecraft alarms. The distributed microprocessor system is configured as a redundant set of hardware with three microprocessors on each half. The microprocessors are surrounded by a group of special purpose hardware components which greatly enhance the ability of the software to perform its task. It is shown how the software architecture makes a distributed system of six microprocessors appear to each user as a single virtual machine, and collectively as a set of cooperating virtual machines that prevent the simultaneous presence of the several users from interfering destructively with each other.
Thomas, J. S.↗
The Soviet aim - A permanent base in space
The goals of the Soviet manned space program, which apparently include the establishment of a permanent manned presence in space, are discussed. The operational experience of the Salyut-6 space station, which in the past four years has hosted six major manned expeditions and 10 short visits, is considered, and the launch of the Cosmos 1267 spacecraft currently orbiting the earth attached to Salyut 6 is examined. The modular nature of Soviet space stations as a result of the relatively low power of their launch vehicles is noted. Attention is then given to the history of the Salyut program, particularly the design, operational history and equipment of Salyut 6, and to the probable nature of Cosmos 1267 as space station module which also carried an experimental reentry vehicle which returned to earth shortly after launch. The opposite directions of Soviet and American manned space programs, one towards permanent stations and the other toward quick, frequent and easy access to space, are emphasized, and the potential benefits of a coordinated approach are noted.
Oberg, J.↗
Space Shuttle base heating
Explore the source record for details and available documents.
Greenwood, T. F.↗
Thermal arcjet technology for space propulsion
Advanced space propulsion systems are required to meet projected Air Force needs through the year 2000. Most of these missions require a large, on-orbit impulse capability. High specific impulse (I sub sp) electric engines can provide this impulse while consuming relatively little propellant. An arcjet engine system, which operates in the range of 800 to 2000 s I sub sp, is a promising candidate to meet these projected Air Force mission needs. This electric propulsion system is ideally suited to missions currently under consideration, such as the Space-based Radar and other space platforms, because sufficient power is already installed for other functions on the spacecraft. Also, arcjet systems are attractive for NASA near-term, low-cost Mariner Mark II missions to Saturn and Uranus. Development of arcjet engines was an Air Force and NASA-sponsored activity that proceeded vigorously from its inception during the late 1950's up to the mid-1960's when the programs were terminated. This paper describes thermal arcjet technology as it was developed over two decades ago and points to the direction this technology development should proceed in the future. In particular, operation with storable propellants such as ammonia and hydrazine are considered. The performance, applicability and advantages of these systems in terms of increased payload and/or decreased trip times are discussed.
Pivirotto, T. J.↗
System technology analysis of aeroassisted orbital transfer vehicles: Moderate lift/drag (0.75-1.5). Volume 2: Supporting research and technology report, phase 1 and 2
Technology payoffs of representative ground based (Phase 1) and space based (Phase 2) mid lift/drag ratio (L/D) aeroassisted orbit transfer vehicles (AOTV) were assessed and prioritized. The methodology employed to generate technology payoffs, the major payoffs identified, the urgency of the technology effort required, and the technology plans suggested are summarized for both study phases. Technology issues concerning aerodynamics, aerothermodynamics, thermal protection, propulsion, and guidance, navigation and control are addressed.
Source record↗
Component Data Base for Space Station Resistojet Auxiliary Propulsion
The resistojet was baselined for Space Station auxiliary propulsion because of its operational versatility, efficiency, and durability. This report was conceived as a guide to designers and planners of the Space Station auxiliary propulsion system. It is directed to the low thrust resistojet concept, though it should have application to other station concepts or systems such as the Environmental Control and Life Support System (ECLSS), Manufacturing and Technology Laboratory (MTL), and the Waste Fluid Management System (WFMS). The information will likely be quite useful in the same capacity for other non-Space Station systems including satellite, freeflyers, explorers, and maneuvering vehicles. The report is a catalog of the most useful information for the most significant feed system components and is organized for the greatest convenience of the user.
Bader, Clayton H.↗
Regional studies of potential carbon monoxide sources based on Space Shuttle and aircraft measurements
Carbon monoxide measurements made from the Space Shuttle show maxima over South America, central Africa, the eastern Mediterranean, and China. The maxima appear to be associated with either concomitant or prior convection in the air masses which carries boundary layer air into the upper troposphere. Previous aircraft measurements of carbon monoxide and ozone over South America are shown to be consistent with this view. In the tropics the three regions of long-term mean rising motion, which form part of the Walker circulation, are associated with elevated carbon monoxide.
Newell, R. E.↗
Regional studies of potential carbon monoxide sources based on Space Shuttle and aircraft measurements
Carbon monoxide measurements made from the space shuttle show maxima over South America, central Africa, the eastern Mediterranean, and China. The maxima appear to be associated with either concomitant or prior convection in the air masses which carries boundary layer air into the upper troposphere. Previous aircraft measurements of carbon monoxide and ozone over South America are shown to be consistent with this view. In the tropics the three regions of long-term mean rising motion, which form part of the Walker circulation, are associated with elevated carbon monoxide.
Newell, R. E.↗
A new linearized theory of laminar film condensation of two phase annular flow in a capillary pumped loop
Future large space based facilities, such as Space Station, will require energy management systems capable of transporting tens of kilowatts of heat over a hundred meters or more. This represents better than an order of magnitude improvement over current technology. Two-phase thermal systems are currently being developed to meet this challenge. Condensation heat transfer plays a very important role in this system. The present study attempts an analytic solution to the set of linearized partial differential equations. The axial velocity and temperature functions were found to be Bessel functions which have oscillatory behavior. This result agrees qualitatively with the experimental evidence from tests at both NASA Goddard Space Flight Center and elsewhere.
Hsu, Y. K.↗
Experiment plans to study preignition processes of a pool fire in low gravity
Science requirements are specified to guide experimental studies of transient heat transfer and fluid flow in an enclosure containing a two-layer gas-and-liquid system heated unevenly from above. Specifications are provided for experiments in three separate settings: (1) a normal gravity laboratory, (2) the NASA-LeRC Drop towers, and (3) a space-based laboratory (e.g., Shuttle, Space Station). A rationale is developed for both minimum and desired requirement levels. The principal objective of the experimental effort is to validate a computational model of the enclosed liquid fuel pool during the preignition phase and to determine via measurement the role of gravity on the behavior of the system. Preliminary results of single-phase normal gravity experiments and simulations are also presented.
Schiller, David N.↗
BASG thermomechanical pump helium 2 transfer tests
The purpose of the effort described was to perform experiments and calculations related to using a thermomechanical pump in the space-based resupply of the Space Infrared Telescope Facility (SIRTF) with Helium 2. Thermomechanical (fountain effect) pumps have long been suggested as a means for pumping large quantities of Helium 2. The unique properties of Helium 2 have made it useful for cooling space instruments. Several space science missions, including SIRTF, are now being planned which would benefit greatly from on-orbit resupply of Helium 2. A series of experiments were performed to demonstrate that large volumes of Helium 2 can be transferred with a thermomechanical pump at high flow rates and at high efficiency from one dewar to another through valves and lines that are similar to the plumbing arrangement that would be necessary to accomplish such a transfer on-orbit. In addition, temperature, pressure, and flow rate data taken during the tests were used to verify and refine a computer model which was developed.
Mills, G. L.↗
An integrated aerodynamic/propulsion study for generic aero-space planes based on waverider concepts
Research efforts related to the development of a unified aerospace plane analysis based on waverider technology are summarized. Viscous effects on the forebodies of cone-derived waverider configurations were studied. A simple means for determining the average skin friction coefficient of laminar boundary layers was established. This was incorporated into a computer program that provides lift and drag coefficients and lift/drag ratio for on-design waveriders when the temperature and Reynolds number based on length are specified. An effort was made to carry out parabolized Navier-Stokes (PNS) calculations for cone-derived waveriders. When the viscous terms were turned off (in the Euler mode) computations for elliptic cone-derived waveriders could be carried out for a wide range of on-design and off-design situations. Work related to waveriders derived from power law shocks is described in some detail.
Emanuel, G.↗
Attitude steering for space shuttle based synthetic aperture radars
A technique is presented to steer the antenna beam to the zero-Doppler line for a spacecraft platform which operates in a non-zero roll attitude. The purposes of employing this attitude steering technique are reduction of the Doppler centroid error caused by the variation in target elevation; reduction of the Doppler centroid bound; and reduction of the Doppler drift. It is shown that a fixed attitude sequence can be easily accommodated in the radar command sequence to achieve nearly zero-Doppler steering. Implementation of this technique improves the image quality as well as simplifies the processor design.
Chang, C. Y.↗
Human Factors Research Under Ground-Based and Space Conditions
Session TP2 includes short reports concerning: (1) Human Factors Engineering of the International space Station Human Research Facility; (2) Structured Methods for Identifying and Correcting Potential Human Errors in Space operation; (3) An Improved Procedure for Selecting Astronauts for Extended Space Missions; (4) The NASA Performance Assessment Workstation: Cognitive Performance During Head-Down Bedrest; (5) Cognitive Performance Aboard the Life and Microgravity Spacelab; and (6) Psychophysiological Reactivity Under MIR-Simulation and Real Micro-G.
Source record↗
Human Factors Research Under Ground-Based and Space Conditions
In this session, Session WP2, the discussion focuses on the following topics: Training Astronauts Using Three-Dimensional Visualizations of the International Space Station; Measurement and Validation of Bidirectional Reflectance of Shuttle and Space Station Materials for Computerized Lighting Models; Effects of Environmental Color on Mood and Performance of Astronauts in ISS; Psychophysical Measures of Motion and Orientation, Implications for Human Interface Design; and the Sopite Syndrome Revisited, Drowsiness and Mood Changes in Student Aviators.
Source record↗