Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Optical Signatures of Transiently Disordered Semiconductor Nanocrystals

The remarkable optoelectronic properties of semiconductor nanocrystals (NCs) have led to efforts to integrate them as the active material in light-emitting diodes, solid-state-lighting, and lasers. Understanding related high carrier injection conditions is therefore critical as resultant thermal effects can impact optical properties. The physical integrity of the NC is indeed questionable as recent transient X-ray diffraction studies have suggested that NCs reversibly lose crystalline order, or melt, under high fluence photoexcitation. Informed by such studies, here, we examine CdSe NCs under elevated fluences to determine the impact of disordering on optical properties. To this end, we implement intensity-dependent transient absorption using both one- and two-pump methods where the latter effectively subtracts out the NC optical signatures associated with lower fluence photoexcitation, especially band-edge features. At elevated fluences, we observe a long-lived induced absorption to the red of the bandgap across a wide range of sizes that follows power dependent trends and kinetics consistent with the prior transient X-ray measurements. NC photoluminescence studies provide further evidence that melting influences optical properties. These methods of characterizing bandgap narrowing caused by NC disordering could facilitate improved optical amplification and band-edge emission at high excitation density.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlling Dielectric and Relaxor-Ferroelectric Properties for Energy Storage by Tuning Pb 0.92 La 0.08 Zr 0.52 Ti 0.48 O 3 Film Thickness

The energy storage properties of Pb 0.92 La 0.08 Zr 0.52 Ti 0.48 O 3 (PLZT) films grown via pulsed laser deposition were evaluated at variable film thickness of 125, 250, 500, and 1000 nm. These films show high dielectric permittivity up to ~1200. Cyclic I–V measurements were used to evaluate the dielectric properties of these thin films, which not only provide the total electric displacement, but also separate contributions from each of the relevant components including electric conductivity (D1), dielectric capacitance (D2), and relaxor-ferroelectric domain switching polarization (P). Our results show that, as the film thickness increases, the material transits from a linear dielectric to nonlinear relaxor-ferroelectric. And while the energy storage per volume increases with the film thickness, the energy storage efficiency drops from ~80% to ~30%. The PLZT films can be optimized for different energy storage applications by tuning the film thickness to optimize between the linear and nonlinear dielectric properties and energy storage efficiency.

36 MATERIALS SCIENCE↗

Structural isomerism in gold nanoparticles revealed by X-ray crystallography

Revealing structural isomerism in nanoparticles using single-crystal X-ray crystallography remains a largely unresolved task, although it has been theoretically predicted with some experimental clues. Here we report a pair of structural isomers, Au 38 T and Au 38 Q, as evidenced using electrospray ionization mass spectrometry, X-ray photoelectron spectroscopy, thermogravimetric analysis and indisputable single-crystal X-ray crystallography. The two isomers show different optical and catalytic properties, and differences in stability. In addition, the less stable Au38T can be irreversibly transformed to the more stable Au38Q at 50 °C in toluene. This work may represent an important advance in revealing structural isomerism at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unravelling surface and interfacial structures of a metal–organic framework by transmission electron microscopy

Metal-organic frameworks (MOFs) are crystalline porous materials with designable topology, porosity and functionality, having promising applications in gas storage and separation, ion conduction and catalysis. It is challenging to observe MOFs with transmission electron microscopy (TEM) due to the extreme instability of MOFs upon electron beam irradiation. We use a direct-detection electron-counting camera to acquire TEM images of the MOF ZIF-8 with an ultralow dose of 4.1 electrons per square ångström to retain the structural integrity. The obtained image involves structural information transferred up to 2.1 Å, allowing the resolution of individual atomic columns of Zn and organic linkers in the framework. Furthermore, TEM reveals important local structural features of ZIF-8 crystals that cannot be identified by diffraction techniques, including armchair-type surface terminations and coherent interfaces between assembled crystals. Our observations allow us to understand how ZIF-8 crystals self-assemble and the subsequent influence of interfacial cavities on mass transport of guest molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical interferometric analysis of colliding laser produced air plasmas

Colliding air plasmas produced using 1064 nm Nd:YAG laser were analyzed using optical interferometry. For generating multiple air plasmas, the spherical aberrations of the focusing lens were used. The three-dimensional (3D) distributions of the electron density and the gas density behind shock wave front were investigated. The two-dimensional fast Fourier transform technique was used to extract the phase shift of the interferograms and a numerical inverse Abel transformation was applied to reconstruct the 3D distribution of the refractive index. Based on the Gladston-Dale relation, high resolution images of the 3D distributions of the electron density and the gas density were achieved. From the results, a stagnation layer was formed due to the collision of shock waves and the succeeding plasmas. The enhancements of electron density and gas density were observed in the collision zone. It shows that the collision region depends on the pulse energy. With smaller pulse energy, the thickness of the stagnation layer increased, while the enhancement of the gas density behind the shock wave front in the collision zone reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast self-heating in GaN-based laser diodes

We study the time evolution of the internal temperature of GaN-based laser diodes in pulsed operation using time resolved spectroscopy. Time dependent emission spectra are compared to continuous-wave measurements at different temperatures to relate changes in the longitudinal mode spectrum to the internal temperature. From the different shift in emission center and longitudinal modes, two subsystems are identified which heat up on different time scales: the charge carrier plasma and the crystal lattice. While the lattice takes several microseconds to reach thermal equilibrium, the plasma heats up within 20 ns after the onset of the electrical pulse. This behavior is attributed to the small heat capacity of the charge carrier plasma compared to the crystal lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Switching circuit to improve the frequency modulation difference-intensity THz quantum cascade laser imaging

We demonstrate new switching circuit for difference-intensity THz quantum cascade laser (QCL) imaging by amplitude modulation and lock in detection. The switching circuit is designed to improve the frequency modulation so that it can stably lock the amplitude modulation of the QCL and the detector output. The combination of a voltage divider and a buffer in switching circuit to quickly switch the amplitude of the QCL biases of 15.8 V and 17.2 V is successfully to increase the frequency modulation up to ∼100 Hz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of low-energy peaks in electron emission spectroscopy of InGaN/GaN light-emitting diodes

The measurement of the energy distribution of vacuum emitted electrons from InGaN/GaN light-emitting diodes (LEDs) has proven essential in understanding the efficiency loss mechanism known as droop. We report on the measurement and identification of a new low-energy feature in addition to the previously measured three peaks present in the electron emission spectrum from a forward biased LED. Photoemission measurements show that the two low-energy peaks correspond to photoemitted electrons from each of the p-contact metals, palladium and gold. Here we confirm that the mid and high-energy peaks are due to electrons which have transited the p-type region of the device and have been emitted from the semiconductor surface from the bulk Γ-valley or a high-energy side valley.

74 ATOMIC AND MOLECULAR PHYSICS↗

Transverse thermal energy conversion using spin and topological structures

Conversion of thermal to electrical energy has been a subject of intense study for well over two centuries. Despite steady progress throughout the past several decades, solid-state thermoelectric (TE) energy conversion devices remain adequate only for niche applications. One appealing option for circumventing the limits of conventional TE physics is to utilize phenomena where flows of heat and charge are perpendicular, the so-called “transverse” geometry. In this Tutorial, we discuss recent advances behind new ways to generate large transverse thermoelectric voltages, such as the spin Seebeck and Nernst effects, as well as Weyl physics. We provide suggestions for how these mechanisms might be enhanced and implemented into high-efficiency, next generation transverse TE devices. Furthermore, we also discuss best practices for accurate measurement and reporting of transverse thermoelectric material properties, including a case study of a round robin spin Seebeck coefficient measurement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Power scalable semiconductor disk lasers for frequency conversion and mode-locking

The semiconductor disk laser, a relatively novel type of light oscillators, is now under intensive development. These lasers produce an excellent beam quality in conjunction with a scalable output power. This paper presents recent achievements in power scalability, mode-locking and frequency conversion with optically-pumped semiconductor disk lasers. A novel concept for power scaling described here allows the thermal load of the gain material to be reduced, increasing the threshold of rollover and extending the capability for boosting the output power without degradation in the beam quality. The proposed technique is based on the multiple gain scheme. The total power of over 8 W was achieved in dual-gain configuration, while one-gain lasers could produce separately up to 4 W, limited by the thermal rollover of the output characteristics. The results show that the reduced thermal load to a gain element in a dual-gain cavity allows extending the range of usable pump powers boosting the laser output. Orange-red radiation required for a number of challenging applications can be produced through frequency-doubling using a GaInNAs/GaAs laser. Using such a disk laser operating at a fundamental wavelength of 1224 nm, we demonstrate an output power of 2.68 W in the visible region with an optical-to-optical conversion efficiency of 7.4%. The frequency-converted signal could be launched into a single-mode optical fibre with 70%-78% coupling efficiency, demonstrating good beam quality for the visible radiation. Using a Fabry-Perot glass etalon, the emission wavelength could be tuned over an 8-nm spectral range. We report on optically-pumped disk lasers passively mode-locked with a semiconductor saturable-absorber mirror. The potential of harmonic mode-locking in producing pulse trains at multigigahertz repetition rates has been explored. The mode-locked disk laser is investigated for different designs of the gain medium that allow bistable mode-locking to be controlled. An explanation for hysteresis of mode-locking is given based on a laser model including saturable absorption and unsaturated gain in a semiconductor oscillator operating in pulsed regime. (invited paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly efficient passive Q switches for a neodymium laser based on thiopyrylotricarbocyanine dyes

The spectral, photochemical and nonlinear optical properties of a group of thiopyrylotricarbocyanine dyes in a polyurethane matrix are studied and compared with well-known materials for passive Q-switching such as nickel BDN and BDNII complexes. Passive laser Q switches based on these dyes feature the high modulation efficiency (up to 76%) in neodymium lasers and high photochemical stability. It is shown that the service life of Q switches can be considerably increased by removing oxygen from a polymer matrix. (elements of laser setups)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous two-wave lasing in microchip Nd : YAG lasers

Simultaneous two-wave lasing was obtained in microchip end-pumped Nd:YAG lasers at the wavelengths of 1061.5 and 1064.17 nm at room temperature. Laser wave intensities were studied as functions of crystal temperature and pump power. The ranges of parameters were determined in which the two-wave lasing occurs and the reasons for such lasing were established. A model is suggested, which adequately describes the experimental results obtained. (control of radiation parameters)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of high-power femtosecond supercontinua in the near-IR spectral range using broadband parametric frequency conversion in LBO and DCDA crystals pumped at λ = 620 nm

The pump wavelength of parametric amplifiers based on CLBO, DCDA and LBO crystals and pumped by the second harmonic of a femtosecond Cr : forsterite laser (620 nm) is close to optimal for broadband amplification because of the proximity of group velocities of interacting pulses. Injection of a broadband continuum into the range of the signal-wave gain in LBO and DCDA parametric amplifiers, pumped at λ = 620 nm, leads to generation of broadband femtosecond pulses with a spectrum ranging from 1050 to 1600 nm and peak powers up to 20 MW. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Testbeam results of irradiated ams H18 HV-CMOS pixel sensor prototypes

HV-CMOS pixel sensors are a promising option for the tracker upgrade of the ATLAS experiment at the LHC, as well as for other future tracking applications in which large areas are to be instrumented with radiation-tolerant silicon pixel sensors. We present results of testbeam characterisations of the 4 th generation of Capacitively Coupled Pixel Detectors (CCPDv4) produced with the ams H18 HV-CMOS process that have been irradiated with different particles (reactor neutrons and 18 MeV protons) to fluences between 1×10 14 and 5×10 15 1–MeV– n eq . The sensors were glued to ATLAS FE-I4 pixel readout chips and measured at the CERN SPS H8 beamline using the FE-I4 beam telescope. Results for all fluences are very encouraging with all hit efficiencies being better than 97% for bias voltages of 85 V. The sample irradiated to a fluence of 1×10 15 neq—a relevant value for a large volume of the upgraded tracker—exhibited 99.7% average hit efficiency. Furthermore, the results give strong evidence for the radiation tolerance of HV-CMOS sensors and their suitability as sensors for the experimental HL-LHC upgrades and future large-area silicon-based tracking detectors in high-radiation environments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Achievable noise performance of spectroscopic prototype DEPFET detectors

A new generation of spectroscopic X-ray DEPFET detectors has been produced here in the course of the detector development for the Wide Field Imager (WFI) of Athena. These devices served to perform a detailed analysis of the noise composition, which was enabled by the development of appropriate test algorithms. A result of the analysis is the distinction of different components, which sum up to the total noise. In particular the contribution of shot noise, white noise and 1/f noise to the readout noise is determined as well as the signal noise caused by the generation of charge carriers. The resulting parametrization enables the adaptation and optimization of operation modes to given purposes. The studied prototype detectors included 64×64 pixels with a linear gate design and provided an excellent noise, below 1.6 e - ENC at a readout time faster than 10 μs/pixel and a temperature of -80 °C in rolling-shutter operation. This performance is enabled by an extended signal integration time. A further noise reduction is prevented by the signal noise, caused by charge carrier generation. In order to demonstrate the low noise properties of the DEPFET transistor, the measurement conditions were adapted and a noise of 0.95 e - ENC was measured at the expense of the sensor size—by operating only parts of the sensor in window mode—and dynamic range—by using the Al Kα line at about 1.49 keV for calibration.

47 OTHER INSTRUMENTATION↗

Design, upgrade and characterization of the silicon photomultiplier front-end for the AMIGA detector at the Pierre Auger Observatory

AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to complement the study of ultra-high-energy cosmic rays (UHECR) by measuring the muon content of extensive air showers (EAS). It consists of an array of 61 water Cherenkov detectors on a denser spacing in combination with underground scintillation detectors used for muon density measurement. Each detector is composed of three scintillation modules, with 10 m 2 detection area per module, buried at 2.3 m depth, resulting in a total detection area of 30 m 2 . Silicon photomultiplier sensors (SiPM) measure the amount of scintillation light generated by charged particles traversing the modules. In this paper, the design of the front-end electronics to process the signals of those SiPMs and test results from the laboratory and from the Pierre Auger Observatory are described. Compared to our previous prototype, the new electronics shows a higher performance, higher efficiency and lower power consumption, and it has a new acquisition system with increased dynamic range that allows measurements closer to the shower core. The new acquisition system is based on the measurement of the total charge signal that the muonic component of the cosmic ray shower generates in the detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Calibration of the underground muon detector of the Pierre Auger Observatory

To obtain direct measurements of the muon content of extensive air showers with energy above 10 16.5 eV, the Pierre Auger Observatory is currently being equipped with an underground muon detector (UMD), consisting of 219 10 m 2 -modules, each segmented into 64 scintillators coupled to silicon photomultipliers (SiPMs). Direct access to the shower muon content allows for the study of both of the composition of primary cosmic rays and of high-energy hadronic interactions in the forward direction. As the muon density can vary between tens of muons per m 2 close to the intersection of the shower axis with the ground to much less than one per m 2 when far away, the necessary broad dynamic range is achieved by the simultaneous implementation of two acquisition modes in the read-out electronics: the binary mode, tuned to count single muons, and the ADC mode, suited to measure a high number of them. In this work, we present the end-to-end calibration of the muon detector modules: first, the SiPMs are calibrated by means of the binary channel, and then, the ADC channel is calibrated using atmospheric muons, detected in parallel to the shower data acquisition. The laboratory and field measurements performed to develop the implementation of the full calibration chain of both binary and ADC channels are presented and discussed. The calibration procedure is reliable to work with the high amount of channels in the UMD, which will be operated continuously, in changing environmental conditions, for several years.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗