Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shear testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Investigation of the adhesive bonding technology for the insulator structure of EAST neutral beam injector

A key issue on the development of EAST ion source was the junction design of insulator structure, which consists of three insulators and four supporting flanges of electrode grid. Because the ion source is installed on the vertical plane, the insulator structure has to withstand large bending and shear stress due to the gravity of whole ion source. Through a mechanical analysis, it was calculated that the maximum bending normal stress was 0.34 MPa and shear stress was 0.23 MPa on the insulator structure. Due to the advantages of simplicity and high strength, the adhesive bonding technology was applied to the junction of insulator structure. A tensile testing campaign of different junction designs between insulator and supporting flange was performed, and a junction design of stainless steel and fiber enhanced epoxy resin with epoxy adhesive was determined. The insulator structure based on the determined design can satisfy both the requirements of high-voltage holding and mechanical strength.

42 ENGINEERING↗
NASA NTRS1998

Sand Shear Band Thickness Measurements by Digital Imaging Techniques

Digital imaging analysis was used to study localized deformations in granular materials tested under plane strain condition. Two independent techniques were applied and compared. In the first, the digitized optical images of a grid printed on the latex membrane were used to measure the shear band orientation angle and thickness, and were found to be 54.5' and 3.01 mm respectively. The second technique involved introducing an ultra-low viscosity resin into the specimen in preparation for thin- sectioning and microscopic study of the internal fabric. A total of 24 microscopic images obtained from four thin sections were analyzed and void ratio variation was measured. The shear band thickness measurements from images located along the shear band axis (at two locations) were equal to 3.19 mm and 3.29 mm which are very close to the average value obtained from surface analysis. The study was then extended to investigate the effects of sand grain-size and properties, specimen density, and confining pressure on shear band thickness. It was found that the normalized shear band thickness decreases as grain-size and confining pressure increase and as density decreases. Finally, shear band thickness is highly influenced by the specimen dilatancy.

Alshibli, Khalid A.↗
NASA NTRSDate not supplied

Scaling Laws of Ejecta Streaks in Lunar Landings

From the crewed Apollo missions of the 1960s to the recent Chang’e uncrewed lunar missions, the interaction between the supersonic exhaust and the lunar surface generates a striking ray system of ejecta particles that travel radially outward at high speeds. While this intriguing pattern has been observed in experiments and simulations, the underlying mechanism remains unclear. These radial ejecta streaks were also observed during an experimental campaign using a Mach 5.3 jet impinging on a granular bed within a large-scale vacuum chamber. Our findings reveal that the radial ejecta streaks are caused by the Gortler instability, which, due to the curvature of the extremely underexpanded jet, induces counter-rotating streamwise vortices within the jet shear layer. These vortices impact the ground and entrain particles in their upwash regions. Experimental measurements from both ground tests and the literature show that the number of streaks strongly depends on the jet diameter at impact and the shear layer thickness, further revealing a power-law scaling with the jet pressure ratio. These insights highlight the pivotal role of fluid dynamics in extraterrestrial landings and provide a foundation for mitigating risks in future planetary missions.

Lunar Landing↗
DOE OSTI2015

Calibrating Nonlinear Soil Material Properties for Seismic Analysis Using Soil Material Properties Intended for Linear Analysis

Seismic analysis of nuclear structures is routinely performed using guidance provided in “Seismic Analysis of Safety-Related Nuclear Structures and Commentary (ASCE 4, 1998).” This document, which is currently under revision, provides detailed guidance on linear seismic soil-structure-interaction (SSI) analysis of nuclear structures. To accommodate the linear analysis, soil material properties are typically developed as shear modulus and damping ratio versus cyclic shear strain amplitude. A new Appendix in ASCE 4-2014 (draft) is being added to provide guidance for nonlinear time domain SSI analysis. To accommodate the nonlinear analysis, a more appropriate form of the soil material properties includes shear stress and energy absorbed per cycle versus shear strain. Ideally, nonlinear soil model material properties would be established with soil testing appropriate for the nonlinear constitutive model being used. However, much of the soil testing done for SSI analysis is performed for use with linear analysis techniques. Consequently, a method is described in this paper that uses soil test data intended for linear analysis to develop nonlinear soil material properties. To produce nonlinear material properties that are equivalent to the linear material properties, the linear and nonlinear model hysteresis loops are considered. For equivalent material properties, the shear stress at peak shear strain and energy absorbed per cycle should match when comparing the linear and nonlinear model hysteresis loops. Consequently, nonlinear material properties are selected based on these criteria.

nonlinear↗
DOE OSTI2020

Separating the intrinsic alignment signal and the lensing signal using self-calibration in photo- z surveys with KiDS450 and KV450 Data

ABSTRACT To reach the full potential for the next generation of weak lensing surveys, it is necessary to mitigate the contamination of intrinsic alignments (IAs) of galaxies in the observed cosmic shear signal. The self-calibration (SC) of IAs provides an independent method to measure the IA signal from the survey data and the photometric redshift information. It operates differently from the marginalization method based on the IA modelling. In this work, we present the first application of SC to the KiDS450 data and the KV450 data, to split directly the intrinsic shape–galaxy density (Ig) correlation signal and the gravitational shear–galaxy density (Gg) correlation signal, using the information from photometric redshift (photo-z). We achieved a clear separation of the two signals and performed several validation tests. Our measured signals are found to be in general agreement with the KiDS450 cosmic shear best-fitting cosmology, for both lensing and IA measurements. For KV450, we use partial (high-z) data, and our lensing measurements are also in good agreement with KV450 cosmic shear best fit, while our IA signal suggests a larger IA amplitude for the high-z sample. We discussed the impact of photo-z quality on IA detection and several other potential systematic biases. Finally, we discuss the potential application of the information extracted for both the lensing signal and the IA signal in future surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

A critical review of the experimental data for developed free turbulent shear layers

Experimental shear layer data are reviewed and the results are compared to numerical predictions for three test cases. It was concluded from the study that many, if not most, of the apparent inconsistencies which exist in the interpretation of the experimental data for free shear layers result from confusing data taken in developed turbulent flows with those taken in transitional or developing flows. Other conclusions drawn from the study include the following: (1) The effects of Mach number are more uncertain primarily because of limited data and the absence of any turbulence measurements for supersonic shear layers. (2) The data available for heterogeneous shear layers are not sufficient to clearly establish the effect of density ratio on mixing rate.

Birch, S. F.↗
NASA NTRS1980

Ultrasonic attenuation and velocity in AS/3501-6 graphite fiber composite

The ultrasonic group velocity and attenuation were measured as a function of frequency for longitudinal and shear waves in the Hercules epoxy matrix (3501-6) and in the principal directions of the unidirectional Hercules graphite fiber epoxy composite (AS/3501-6). Tests were conducted in the frequency ranges 0.25-14 MHz and 0.5-3 MHz for longitudinal and shear wave modes, respectively. While the attenuation increased with frequency for all wave modes, the group velocity was independent of frequency for all wave modes. In studying the effects of transducer-specimen interface couplant and pressure, it was found that for each transducer, there exists a frequency-dependent 'saturation pressure' corresponding to the maximum output amplitude of the signal.

Williams, J. H., Jr.↗
NASA NTRS1991

Mechanical and analytical screening of braided composites for transport fuselage applications

The mechanics of materials progress in support of the goal of understanding the application of braided composites in a transport aircraft fuselage are summarized. Composites consisting of both 2-D and 3-D braid patterns are investigated. Both consolidation of commingled graphite/PEEK and resin transfer molding of graphite-epoxy braided composite processes are studied. Mechanical tests were used to examine unnotched tension, open hole tension, compression, compression after impact, in-plane shear, out-of-plane tension, bearing, and crippling. Analytical methods are also developed and applied to predict the stiffness and strengths of test specimens. A preliminary study using the test data and analytical results is performed to assess the applicability of braided composites to a commercial aircraft fuselage.

Fedro, Mark J.↗
DOE OSTI2015

Ab initio study of anisotropic mechanical properties of LiCoO{sub 2} during lithium intercalation and deintercalation process

The mechanical properties of Li{sub x}CoO{sub 2} under various Li concentrations and associated anisotropy have been systematically studied using the first principles method. During the lithium intercalation process, the Young's modulus, bulk modulus, shear modulus, and ultimate strength increase with increasing lithium concentration. Strong anisotropy of mechanical properties between a-axis and c-axis in Li{sub x}CoO{sub 2} is identified at low lithium concentrations, and the anisotropy decreases with increasing lithium concentration. The observed lithium concentration dependence and anisotropy are explained by analyzing the charge transfer using Bader charge analysis, bond order analysis, and bond strength by investigating partial density of states and charge density difference. With the decrease of Li concentration, the charge depletion in the bonding regions increases, indicating a weaker Co-O bond strength. Additionally, the Young's modulus, bulk modulus, shear modulus, and toughness are obtained by simulating ab initio tensile tests. From the simulated stress-strain curves, Li{sub x}CoO{sub 2} shows the highest toughness, which is in contraction with Pugh criterion prediction based on elastic properties only.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Relativistic Shear Boundary Layer and the Gamma-Ray Emission of GW170817

We present an analysis of the radiation characteristics of kinetic shear boundary layers created by relativistic plasma jets. Using a model of electromagnetic field data based on particle-in-cell simulations of an electron–ion plasma, we solve the motion of individual test electrons and compute their instantaneous radiated power and peak frequency. By analyzing a large number of test electrons in this manner, we find two distinct electron populations present around the shear boundary layer. The most highly radiative electrons execute looping motion due to crossed electric and magnetic fields as they are accelerated along the bulk flow of the jet, and eventually cross the shear boundary interface at steep angles. Electrons that never cross the shear boundary interface radiate much less energy as a group. Summing over all of the highly radiative electrons, we compute the distribution of the total radiated energy as a function of the angle relative to the bulk flow. Furthermore, this result has important potential implications for the observed radiation output of short gamma-ray bursts viewed at large angles from the jet axis, such as the neutron star merger event GW170817/GRB 170817A.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1973

Study of exothermic processes in shock ignited gases by the use of laser shear interferometry

Report on measurements of maximum exothermic power pulses attainable from a given chemical system. Experimental tests involved the use of a shock tube technique whereby the exothermic process of combustion was controlled by reflected shock, so that it occurred under virtually inviscid flow conditions, while the measurements were performed at a resolution commensurate with the actual rate of chemical reaction. Experimental observations were made by means of a novel method of laser shear interferometry - a cross-breed between holography and the conventional means for measuring refractive index fields, in that, on one hand, it was based on the exploitation of the phase coherence of the laser light beam, recording first a diffraction image of the wave fronts which, for the desired final result, had to be optically reconstructed, and, on the other, it yielded eventually either two-dimensional interferograms or schlieren photographs of the observed phenomena.

Meyer, J. W.↗
DOE OSTI2024

Spatially Dependent Seismic Wavefield Scattering from an Underground Chemical Explosion: Analysis of the Source Physics Experiment Dry Alluvium Geology Large- N Array

Explosion sources have been observed to generate significant shear‐wave energy despite their isotropic nature. To investigate this phenomenon, we conduct an analysis of the seismic data collected as part of the Source Physics Experiment (SPE): Dry Alluvium Geology (DAG) and investigate the generation of shear‐wave energy via scattering. The data were produced by three underground chemical explosions and consist of three‐component seismograms, which were recorded by the DAG Large‐N array. Synthetic tests suggest that for the DAG experiments, small‐scale stochastic heterogeneities, defined as features with correlation lengths of 10–100s of meters, are more effective than large‐scale geologic structure (scales >1–10 km) at reproducing the scattering of explosion generated wavefields observed at DAG. We analyze the seismic data for spatially variable ratios between transversely and radially polarized seismic energy, and then estimate the mean free path of P and S waves. All analyses are conducted within a frequency band of 5–50 Hz. The ratio of transversely to radially polarized energy is the highest in the east and west portion of the Large‐N array. In addition, the magnitude of the estimated S‐wave mean free path is shorter in the eastern portion of the Large‐N array. This variation indicates that the eastern area of the DAG array is where more scattering is occurring, suggesting azimuthal dependence of P‐to‐P and P‐to‐S scattering. Furthermore, this azimuthal dependence of P‐to‐S scattering can have implications for explosion discrimination based on spectral ratios of seismic wave types, because the general assumption is that explosions do not generate shear‐wave energy. Synthetic tests modeling only larger‐scale geologic structure had lower transversely polarized energy (only four stations showing a transversely to radially polarized energy ratio greater than 1) and fewer stations (<10) displaying shorter (<300 m) mean free paths than what was observed in the DAG data results.

Darrh, Andréa Nicole↗
NASA NTRS1990

Two-equation turbulence modeling of oscillatory boundary layers

Three time-dependent turbulent boundary layer problems are treated using a k-epsilon turbulence model. The flows are characterized by large pressure gradients and either reversing or rotating wall shear stress vectors. Two existing and one new near-wall formulations are tested. The computed results are compared with data from Direct Numerical Simulations of the same flows. In one case previously unpublished DNS-data are given. It is found that the k-epsilon model can provide good predictions for the wall shear as well as profiles of velocities, turbulent kinetic energy, and dissipation. The crucial part is the choice of near-wall terms.

Justesen, Peter↗
NASA NTRS1979

Ultrasonic attenuation and velocity in AS/3501-6 graphite/epoxy fiber composite

The ultrasonic group velocity and attenuation were measured as a function of frequency for longitudinal and shear waves in the epoxy matrix (3501-6) and in the principal directions of the unidirectional graphite/epoxy composite (AS/3501-6). Tests were conducted in the frequency ranges 0.25 Mz to 14 MHz and 0.5 Mz to 3 MHz for longitudinal and shear wave modes, respectively. The attenuation increased with frequency for all wave modes, but the group velocity was independent of frequency for all wave modes. The effects of pressure and couplant at the transducer-specimen interface were studied and it was found that for each transducer type there exists a frequency dependent 'saturation pressure' corresponding to the maximum output signal amplitude.

Williams, J. H., Jr.↗
DOE OSTI2024

Low-Cost, High-Performance Carbon Fiber for Compressed Natural Gas Storage Tanks (Final Technical Report – Down Select Report)

The aim of this project is to reduce the cost of Type IV, carbon fiber (CF) composite overwrap compressed gas storage tanks by reducing the cost of CF and CF composites. The project team worked to reduce the cost of CF by exploring and testing opportunities for a low-cost alternative precursor material for CF production to supplant market-dominant and costly polyacrylonitrile (PAN). Concurrently, the team aimed to reduce the cost of the tanks at the composite level by improving the interfacial adhesion between the fibers and the matrix resin through the incorporation of low-cost nanoparticles recycled from waste materials, which would reduce the volume of costly CF required to achieve the same tank performance. At the end of the first year, the project team selected mesophase pitch as the primary precursor candidate from a field of materials based on the superior mechanical performance and cost-saving potential. During the second year, the team produced CFs derived from mesophase pitch achieving an average tensile strength of 365.6 ksi and average tensile modulus of 40.74 Msi. Facility availability for spinning and converting these fibers at greater scale has hindered scale-up demonstration, but the team has identified opportunities to conduct this work in the near term. Cost modeling shows that these mesophase pitch-derived CFs can be up to 40% less expensive than PAN-derived CFs due to the lower cost of the feedstock material, higher throughput, greater conversion yield, and lower cost spinning method and compared to PAN. Additionally, the team has demonstrated at lab-scale that nanoparticle coating CFs can significantly increase the interfacial shear strength and load transfer efficiency of CFs in a matrix. Single filament pull-out testing showed a 27% average increase in max interfacial shear strength due to this coating. A continuous method of applying these coatings to a tow of CF has been developed for scale-up. 26 m tows of coated CFs were produced using this system and formed into composite ring samples for ASTM ring burst testing. Issues with the testing protocol have limited assessment of these results. A prototype Type IV tank was designed to meet ANSI HGV2 standards, and the design criteria set out by DOE, using the CF properties developed by the team paired with a proprietary resin matrix, a polyamide liner, and aluminum end bosses. The tank weighs 153.1 kg and with a total capacity of 5.8 kg H2 (5.6 kg usable), which yields a gravimetric capacity of 1.17 kWh/kg. Cost modeling predicts that the tank will have a projected cost of $15.73/kWh. Tank performance modeling does not include considerations for fiber-matrix load transfer efficiency improvements offered by nanoparticle coating method.

08 HYDROGEN↗
DOE OSTI2018

Fracture Analysis of ARB-Processed CP-Ti Sheets Under Unidirectional Tensile Loading

The fracture behavior of commercially pure titanium (CP-Ti) processed by accumulative roll bonding (ARB) was investigated in this study. Monolithic and Ti-SiC composite samples were first produced by ARB process and then subjected to uniaxial tensile testing at room temperature. Two different ductile fracture mechanisms including shear dimple rupture and equiaxed dimple rupture were observed in the initial and final ARB cycles, respectively. The difference in the rupture mechanism was attributed to different stress states at the crack tip and different densities of metallurgical defects. A non-uniform distribution of dimple size was obtained for fracture surfaces of the samples processed by a low number of ARB cycles. This was attributed to the heterogeneity of microstructure in the primary ARB cycles. The fracture surface of the samples processed by high ARB cycles represented more uniform dimples. This was attributed to more homogenous microstructure in the final cycles. Moreover, SiC particles showed a major role in fracture of samples, so that they affected the size and depth of the dimples, as well as the number of ARB cycles in which the transmission of the fracture mechanism occurred.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Assessment of a tomography-informed polyhedral discrete element modelling approach for complex-shaped granular woody biomass in stress consolidation

The design of handling equipment for granular biomass primarily requires experiments. Discrete element models (DEM) can provide designers with detailed insight into the behaviour of granular materials. However, granular biomass comprising complex-shaped particles is difficult to model with DEM. A tomography-informed DEM approach and an exhaustive assessment of the ability of the approach to predict the bulk behaviour of milled pines using experimental data is presented. Nano-CT scan was conducted to obtain 3D particle surface geometries as the basis for particle shape approximation by a polyhedral model and a sphero-polyhedral model. These models were applied in the simulation of a compressibility test. Our parametric study showed that particle Young's modulus and restitution coefficient are the two main properties influencing the simulated bulk behaviour of the DEM particles and that the level of approximating DEM particle shape for real particles is critical for accurately replicating the bulk behaviour of milled pines. The polyhedral model demonstrated better suitability than its sphero-polyhedral counterpart for modelling pine particles. The polyhedral model calibrated in a compressibility test was then applied in the simulations of a friction test without additional parameter tuning. Interlocking was dominant in the shear of bulk pine particles. Remarkably, the polyhedral model predicted the frictional behaviour of the pine particles when compared to the experimental results. The limitations of the model, as well as possible ways for enhancement, are discussed. This work provided novel insights into the suitability of complex-shaped DEM models for granular woody biomass.

Biomass flow↗