Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “particulate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Compressor cascade performance deterioration caused by sand ingestion

Airfoil cascade erosion and performance deterioration was investigated in a gas particle cascade tunnel. The cascade blades were made of 2024 aluminum alloy and the solid particles used were quartz sand. The results of the experimental measurements are presented to show the change in the blade surface erosion, pressure distribution and the total loss coefficient with erosion. The surface quality of the blades exposed to particulate flows are changing the material surfaces. With time, the surface roughness increases and leads to a decrease in engine performance. It was found that the surface roughness values increase asymptotically to a maximum value with increased erosion. The experimental results indicate that the roughness parameters correlate well against the mass of particles impacting unit area of the surface. Such a correlation is useful in aerodynamics and performance computations in turbomachinery.

Tabakoff, W.↗
NASA NTRS1982

The Shuttle Environment Workshop, executive summary and workshop procedures

One of the main experimental monitors used to determine the environment in the payload bay was the Induced Environment Contamination Monitor. This package of instruments has made environmental measurements during STS flights with a high degree of success. This has shown that the shuttle environment is relatively free of contaminants, except for special instances of increased abundance of methane, water vapor and particulates. Results of these measurements are rapidly becoming more available. In establishing the Shuttle Environment Workshop, the findings were shared with scientific experimenters, users and other individuals who need to know what the Shuttle is like and what experimenters may expect in the payload bay. The Workshop was centered around results obtained from the environmental measurements made on the Shuttle. The program agenda for the workshop is given. The procedures and flow of communications for the workshop are indicated.

Lehmann, J.↗
NASA NTRS1983

Introductory comments

Vibroacoustic and thermal environment data gathered from the first three flights of the space shuttle are presented. The characterization of the particulate, gaseous, and electromagnetic emissions associated with the shuttle flight is emphasized. Measurements of vehicle glow light emissions and material effects (mass loss) due to the low Earth environment interactions with the shuttle vehicle are presented.

Leger, L. J.↗
NASA NTRS1983

Evaluation of low-cost aluminum composites for aircraft engine structural applications

Panels of discontinuous SiC composites, with several aluminum matrices, were fabricated and evaluated. Modulus, yield strength and tensile strength results indicated that the properties of composites containing SiC whisker, nodule or particulate reinforcements were similar. The modulus of the composites was controlled by the volume percentage of the SiC reinforcement content, while the strength and ductility were controlled by both the reinforcement content and the matrix alloy. The feasibility of fabricating structural shapes by both wire performs and direct casting was demonstrated for Al2O3/Al composites. The feasibility of fabricating high performance composites into structural shapes by low pressure hot molding was demonstrated for B4C-coated B/Al composites.

Mcdanels, D. L.↗
NASA NTRS1982

Literature review of organic matter transport from marshes

A conceptual model for estimating a transport coefficient for the movement of nonliving organic matter from wetlands to the adjacent embayments was developed in a manner that makes it compatible with the Earth Resources Laboratory's Productive Capacity Model. The model, which envisages detritus movement from wetland pixels to the nearest land-water boundary followed by movement within the water column from tidal creeks to the adjacent embayment, can be transposed to deal with only the interaction between tidal water and the marsh or to estimate the transport from embayments to the adjacent coastal waters. The outwelling hypothesis postulated wetlands as supporting coastal fisheries either by exporting nutrients, such as inorganic nitrogen, which stimulated the plankton-based grazing food chain in the water column, or through the export of dissolved and particulate organic carbon which provided a benthic, detritus-based food web which provides the food source for the grazing food chain in a more indirect fashion.

Dow, D. D.↗
NASA NTRS1983

Advanced inorganic separators for alkaline batteries and method of making the same

A flexible, porous battery separator includes a coating applied to a porous, flexible substrate. The coating comprises: (1) a thermoplastic rubber-based resin which is insoluble and unreactive in the alkaline electrolyte, (2) a polar organic plasticizer which is reactive with the alkaline electrolyte to produce a reaction product which contains a hydroxyl group and/or a carboxylic acid group, and (3) a mixture of polar particulate filler materials which are unreactive with the electrode. The mixture comprises at least one first filler material having a surface area of greater than 25 sq meters/gram, at last one second filler material having a surface area of 10 to 25 sq meters/gram. The volume of the mixture of filler materials is less than 45% of the total volume of the fillers and the binder. The filler surface area per gram of binder is about 20 to 60 sq meters/gram, and the amount of plasticizer is sufficient to coat each filler particle.

Sheibley, D. W.↗
NASA NTRS1982

Shuttle payload integration - Contamination aspects

As part of the development of the Space Shuttle, a payload integration system has been established. This integration system or process encompasses several technical disciplines, one of which is concerned with the control of molecular and particulate contamination. Specific integration procedures and documentation have evolved that reflect the incorporation of payload/Space Transportation System contamination requirements and capabilities. Of the 38 payloads in the payload integration system currently, about 20% are considered sensitive to contamination in that special precautions must be taken to ensure that contamination from the Space Shuttle Orbiter does not impair payload function. Most of these payload requirements have been satisfied by the incorporation of controlled ground operations discipline and installation of a payload bay liner, which isolates the payload from the Orbiter systems. Some payloads, however, provide covers for sensitive payload instrumentation.

Jacobs, S.↗
NASA NTRS1982

Hot spots of Io

The size and temperature, morphology and distribution, variability, possible absorption features, and processes of hot spots on Io are discussed, and an estimate of the global heat flux is made. Size and temperature information is deconvolved to obtain equivalent radius and temperature of hot spots, and simultaneously obtained Voyager thermal and imaging data is used to match hot sources with specific geologic features. In addition to their thermal output, it is possible that hot spots are also characterized by production of various gases and particulate materials; the spectral signature of SO2 has been seen. Origins for relatively stable, low temperature sources, transient high temperature sources, and relatively stable, high-tmperature sources are discussed.

Pearl, J. C.↗
NASA NTRS1983

A method of predicting the performance deterioration of a compressor cascade due to sand erosion

Performance deterioration due to sand erosion is a well known phenomena for aircraft engines operating in particulate flow environments. A method for predicting this performance deterioration is developed and applied to a two dimensional compressor cascade. The locations of the particles impacts are computed by analyzing the trajectories of the individual particles. From this analysis, the material removed, the changes in the airfoil shape, and the roughness development over the surface are estimated as a function of time. The resulting airfoil profiles are analyzed for predicting performance by using an inviscid-viscous interaction technique. The analytical solution is compared with experimental results.

Balan, C.↗
NASA NTRS1983

Interpretation of whole-disk photometry of Phobos and Deimos

Small scale surface features of the moons Deimos and Phobos were studied using star tracker observations made by the Mariner 9 and Viking orbiters. The whole-disk brightness/solar phase angle phase curves were developed out to a phase angle of 125 deg. An analysis was undertaken according to Lumme-Bowell theory to obtain accurate phase integrals zero-phase geometric albedos, and Bond albedos. The microstructural and particulate surface properties of the two moons were found to be very similar, as were the whole-body densities and the microphysical makeup, thereby suggesting a common origin. However, the presence of streamers on Deimos and the relatively smooth surfaces of both moons indicates a long-term influence of Mars producing surface morphologies different from what would occur with asteroids.

Pang, K. D.↗
NASA NTRS1983

Peculiar ultraviolet interstellar extinction

In connection with investigations of the physical characteristics of interstellar dust, a study of objects with peculiar extinction might provide new insights about the composition, size distribution, formation, and destruction of the particulate matter. Meyer and Savage (1981) have found that the dust toward many stars exhibits peculiar UV extinction. The present investigation is concerned with International Ultraviolet Explorer (IUE) spectrophotometric measurements for a sample of stars judged by Meyer and Savage to have highly anomalous UV extinction as inferred from the broad-band Astronomical Netherlands Satellite (ANS) data. The reported IUE measurements provide the opportunity to determine if the ANS photometry measurements of Meyer and Savage are anomalous because of peculiar extinction.

Massa, D.↗
NASA NTRS1983

Occultations by possible rings in Saturn's outer magnetosphere - 1982-1985

The presence of particulate rings in the outer magnetosphere of Saturn is suggested by Pioneer and Voyager spacecraft low energy plasma ion data analyses. For each of the 14 stars near which Saturn passes, the table presented furnishes the date or dates on which the occultation would occur and the star's SAO catalog number. Of these 14 star occultations due to the hypothesized rings projected for the August 1982-December 1985 period, three stars are also occulted by Saturn and its known rings.

Mink, D. J.↗
NASA NTRS1983

A semiempirical method for analysis of the reflectance spectra of binary mineral mixtures

A simple semiempirical method is presented for determination of the spectral reflectance of a powdered binary mineral mixture. This technique uses a two-stream radiative transfer model (a modified Kubelka-Munk model) on a particulate medium of isotroic scatterers The particles are assumed to be much larger than the wavelength of light under consideration. This same method can be used to determine the relative proportion of components in a mixture for which the spectral reflectance is known. Binary mixtures of olivine, two pyroxenes, and magnetite are used to test this model. The theoretical and empirical results agree approximately within experimental errors.

Johnson, P. E.↗
NASA NTRS1983

Effect of humidity on jet engine axial-flow compressor performance

Two problems related to the ingestion of humid air into jet engine axial compressors have been studied: (1) the changes in the performance of the compressor in the absence of condensation and (2) the changes in the entry conditions to the compressor when condensation occurs. Regarding the first, the extent of changes are predicted and also measured in the case of a six-stage compressor operated with air-methane gas mixture utilizing the similarities in the thermodynamic properties between water vapor and methane. For the condensation process in an inlet, a model is described that takes into account the presence of micro particulates and the flow field changes in the vicinity of the inlet wall. Finally, the effects of humidity on engine performance are discussed in relation to engine trim and control schemes.

Ehresman, C. M.↗
NASA NTRS1983

Lidar remote measurements of Space Shuttle ground cloud emissions

The application of lidar remote sensing techniques to the measurement of spacecraft-booster-exhaust-cloud parameters is illustrated, using data obtained from the launch of STS-3. Mie-scatter measurements of plume and cloud particulates were made by a mobile unit with computer controlled elevation and azimuth coverage. Scattergraphs of typical STS-3 lidar data are presented and discussed. The potential use of DIAL techniques to measure the concentrations of HCl, N2H4, and NO2 is evaluated in terms of EPA overall-standard-deviation guidelines. It is shown that currently operational lidar systems can be modified to determine contamination or air pollution by these molecular species resulting from spacecraft launches.

Caputo, B.↗
NASA NTRS1983

Stabilization of the yeast desaturase system by low levels of oxygen

The stability of particulate palmitoyl-CoA desaturase preparations from anaerobically grown yeast cells was increased by exposure to low levels of oxygen. The stabilizing effect of oxygen may be based upon the increased amounts of palmitoleic acid and ergosterol that become available to the cells. These results suggest the evolutinary appearance of this system at a time when atmospheric oxygen was at a low level.

Volkmann, C. M.↗
NASA NTRS1982

Cryogenic particle collection on a cometary mission

The present investigation is concerned with research related to the design of a method for capturing effectively particulate matter and volatiles from the tail of a comet for the purpose of chemical analysis. It is envisaged to conduct a space mission with a means of propulsion which would make it possible to maneuver the space probe into the coma of the comet. The collecting medium has to be chemically inert and easily distinguishable from the particles being collected. It is proposed to employ a film of solid xenon at a temperature of 65 K as the collecting medium. Sublimation of this film and the resultant pressure will be used to concentrate the particles on a small area suitable for analysis. Attention is given to the laboratory apparatus, the experimental work, the experimental results, and the cryogenic requirements for a space mission.

Szara, R. J.↗
NASA NTRS1983

Absorption of energetic protons by Saturn's Ring G

A reexamination of Pioneer 11 data for the distribution of energetic protons in Saturn's inner magnetosphere has yielded an improved value for the ratio of the cosmic ray albedo neutron decay source strength to the radial diffusion coefficient, and the use of the Blake et al. (1983) lower limit on the source strength is used to find an upper limit on the mean residence time against diffusion. By means of Voyager data on normal optical opacity and radial width, it is found that the particulates in Saturn's Ring G have an efective radius of more than about 0.035 cm, an areal mass density of 1.4 x 10 to the -6th g/sq cm, and an areal number density of 0.008/sq cm. It is reasonably certain that there are no satellites having a radius of the order of 1 km or larger associated with Ring G.

Van Allen, J. A.↗