Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orbit correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Maneuver Design for the Juno Mission: Inner Cruise

The Juno spacecraft launched in August 2011 and, following a successful Earth flyby in October 2013, is on course for a nominal orbit insertion at Jupiter in July 2016. This paper examines the design and execution of deterministic and statistical trajectory correction maneuvers during the first approximately 27 months of post-launch operations that defined the "Inner Cruise" phase of the Juno mission. Topics of emphasis include the two deep space maneuvers, Earth flyby altitude biasing strategy, and the sequence of trajectory correction maneuvers executed in the weeks prior to the successful Earth gravity assist.

Pavlak, Thomas A.↗

Mars Science Laboratory interplanetary navigaton analysis

The Mars Science Laboratory (MSL) is a NASA rover mission that will be launched in late 2011 and will land on Mars in August of 2012. This paper describes the analyses performed to validate the navigation system for launch, interplanetary cruise, and approach. MSL will use guidance during its descent into Mars in order to minimize landing dispersions, and therefore will be able to use smaller landing zones that are closer to terrain of high scientific interest. This will require a more accurate delivery of the spacecraft to the atmospheric entry interface, and a late update of the state of the spacecraft at entry. During cruise and approach the spacecraft may perform up to six trajectory correction maneuvers (TCMs), to target to the desired landing site with the required flight path angle at entry. Approach orbit determination covariance analyses have been performed to evaluate the accuracy that can be achieved in delivering the spacecraft to the entry interface point, and to determine how accurately the state of the spacecraft can be predicted to initialize the guidance algorithm. In addition, a sensitivity analysis has been performed to evaluate which factors most contribute to the improvement or degradation of the navigation performance, for both entry flight path angle delivery and entry state knowledge.

Wong, Mau C.↗

Software assurance of autonomous spacecraft control

The work described addresses assurance of a planning and execution software system being added to an in-orbit CubeSat to demonstrate autonomous control of that spacecraft. Our focus was on how to develop assurance of the correct operation of the added software in its operational context, our approach to which was to use an assurance case to guide and organize the information involved.

Bocchino, Robert↗

Assessment of MODIS On-orbit Polarization Impact on Detector Relative Calibration

The Moderate-Resolution Imaging Spectroradiometer (MODIS) has been maintained its nominal operations since it was launched in December 1999 on Terra and May 2002 on Aqua spacecraft, respectively. MODIS is a scanning radiometer with a two-sided mirror that scans the Earth over an angular range from -55° to +55° off nadir and covers a wavelength range from 0.4 to 14.4 μm in 36 spectral bands. The sensitivity to polarization was fully characterized during prelaunch characterization for each reflective solar band (RSB), detector and mirror side as a function of scan angle. It was observed that while on-orbit polarization sensitivity for Aqua MODIS has been stable over the course of mission, the Terra MODIS polarization sensitivity at a few short wavelengths showed a significant increase near the end of scan angle after a few years in the mission. Our previous study examined the impact of polarization on the measured top-of-atmosphere reflectances obtained over the pseudo-invariant desert sites. There are up to 25% change in gain and 30% seasonal variation in select Terra RSBs due to the increase in polarization sensitivity. In this study, we examine relative changes in the polarization sensitivity of detectors within a band. Results from prelaunch tests indicate that there is a noticeable detector dependent polarization sensitivity and it is expected that such a dependency could change on orbit, particularly for Terra MODIS. Results of this study provide useful information on polarization impact and implementation of the correction algorithm.

MODIS↗

Semiclassical shell-structure moment of inertia for equilibrium rotation of a simple Fermi system

Semiclassical shell-structure components of the collectivemoment of inertia are derived within the mean-field cranking model in the adiabatic approximation in terms of the free-energy shell corrections through those of a rigid body for the statistically equilibriumrotation of a Fermi system at finite temperature by using the nonperturbative extended Gutzwiller periodic-orbit theory. Their analytical structure in terms of the equatorial and 3-dimensional periodic orbits for the axially symmetric harmonic oscillator potential is in perfect agreement with the quantum results for different critical bifurcation deformations and different temperatures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Resolution of a Reflector Shroud Fatigue Failure

Two cracks were observed on a reflector shroud for a space program after previously being subjected to the protoflight test campaign and several regression tests. After extensive analysis and investigations, the failure mechanism was identified to be fatigue as a result of the numerous vibration tests imposed on the unit. Two feasible corrective actions were proposed: first, a notched vibration profile which possesses sufficient margin from the anticipated acoustic and launch loads, while maintaining adequate fatigue life through launch and on-orbit operations, and second, a re-design of the shroud to strengthen the fatigue-susceptible areas. In this paper, we present the inspections, testing, and analysis performed to establish that the cracks were a result of fatigue failure. We discuss the conservative fatigue analysis methodology used in the development of both corrective action options. Finally, we review the lessons learned and the actions incorporated into the rework, subsequent regression testing, and the test plans to minimize the risk of recurrence in future units.

response limiting↗

Orbit Determination for the Mars 2020 Mission

NASA’s Mars 2020 Mission successfully executed its Martian entry, descent, and landing sequence on February 18, 2021. Spacecraft navigation guided the spacecraft from its launch injection to entry into the Martian atmosphere; to do so, three trajectory correction maneuvers and two onboard state updates were performed. Navigation was required to provide an entry state with a maximum uncertainty of 2.8 km in position and 2.0 m/sec in velocity (3-σ); the flight performance was approximately 900 m and 66 cm/sec (3-σ). This paper presents the orbit determination models, measurements, filter strategies and performance throughout launch, cruise and Mars approach.

Wong, Mau↗

Calibration of propulsion simulation nozzles for space shuttle booster and orbiter models for the abort/separation staging experimental program

An experimental program to determine the power-on aerodynamic flight characteristics of the booster and orbiter vehicles during the abort separation maneuver is reported. An essential contribution to such a test program is the gas dynamic simulation of the size and shape of the plumes emitting from the full-scale orbiter and booster main propulsion systems. The two major effects of the plume which must be simulated are: the interaction of the plume with the external flow field, and the direct impingement of the plumes on surfaces which are enveloped by the plume. To accomplish the objective of correct plume simulation, the similarity parameters developed by Herron and the requirement to match momentum flux per unit area between the model and the full-scale systems, were applied to the orbiter and booster propulsion systems.

Baker, L. R., Jr.↗

FIRST BEAM TESTS OF THE APS MBA UPGRADE ORBIT FEEDBACK CONTROLLER

The new orbit feedback system required for the APS multi-bend acromat (MBA) ring must meet challenging beam stability requirements. The AC stability requirement is to correct rms beam motion to 10 % the rms beam size at the insertion device source points from 0.01 to 1000 Hz. The vertical plane represents the biggest challenge for AC stability which is required to be 400 nm rms for a 4 micron vertical beam size. In addition long term drift over a period of 7 days is required to be 1 micron or less at insertion de- vice BPMs and 2 microns for arc bpms. We present test re- sults of theMBA prototype orbit feedback controller (FBC) in the APS storage ring. In this test, four insertion device BPMs were configured to send data to the FBC for process- ing into four fast corrector setpoints. The configuration of four bpms and four fast correctors creates a 4-bump and the configuration of fast correctors is similar to what will be implemented in the MBA ring. We report on performance benefits of increasing the sampling rate by a factor of 15 to 22.6 kHz over the existing APS orbit feedback system, lim- itations due to existing storage ring hardware and extrapo- lation to theMBA orbit feedback design. FBC architecture, signal flow and processing design will also be discussed.

Sereno, N. S.↗

The gravitomagnetic interaction and its relationship to other relativistic gravitational effects

To better understand the relationship between the expected precession rates of an orbiting gyroscope (GP-B) and other observable consequences in the solar system of relativistic, post-Newtonian gravity, a phenomenological model was developed of post-Newtonian gravity which presupposes the very minimum possible concerning the nature and foundations of the gravitational interaction. Solar system observations, chiefly interplanetary ranging, fix all the parameters in the phenomenological model to various levels of precision. This permits prediction of gyroscope precession rates to better than 10 pct. accuracy. A number of new precession terms are calculated which would exist if gravity were not a metric field phenomenon, but this would clash with other empirical observations of post-Newtonian effects in gravity. It is shown that gravitomagnetism, the post-Newtonian gravitational corrections to the interactions between moving matter, plays a ubiquitous role in determining a wide variety of gravitational effects, including the precession of orbiting gyroscopes.

Nordtvedt, Kenneth↗

Forced motion near black holes

We present two methods for integrating forced geodesic equations in the Kerr spacetime. The methods can accommodate arbitrary forces. As a test case, we compute inspirals caused by a simple drag force, mimicking motion in the presence of gas. We verify that both methods give the same results for this simple force. We find that drag generally causes eccentricity to increase throughout the inspiral. This is a relativistic effect qualitatively opposite to what is seen in gravitational-radiation-driven inspirals, and similar to what others have observed in hydrodynamic simulations of gaseous binaries. We provide an analytic explanation by deriving the leading order relativistic correction to the Newtonian dynamics. If observed, an increasing eccentricity would thus provide clear evidence that the inspiral was occurring in a nonvacuum environment. Our two methods are especially useful for evolving orbits in the adiabatic regime. Both use the method of osculating orbits, in which each point on the orbit is characterized by the parameters of the geodesic with the same instantaneous position and velocity. Both methods describe the orbit in terms of the geodesic energy, axial angular momentum, Carter constant, azimuthal phase, and two angular variables that increase monotonically and are relativistic generalizations of the eccentric anomaly. The two methods differ in their treatment of the orbital phases and the representation of the force. In the first method, the geodesic phase and phase constant are evolved together as a single orbital phase parameter, and the force is expressed in terms of its components on the Kinnersley orthonormal tetrad. In the second method, the phase constants of the geodesic motion are evolved separately and the force is expressed in terms of its Boyer-Lindquist components. This second approach is a direct generalization of earlier work by Pound and Poisson [A. Pound and E. Poisson, Phys. Rev. D 77, 044013 (2008).] for planar forces in a Schwarzschild background.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Monte Carlo explicitly correlated second-order many-body perturbation theory

A stochastic algorithm is proposed and implemented that computes a basis-set-incompleteness (F12) correction to an ab initio second-order many-body perturbation energy as a short sum of 6- to 15-dimensional integrals of Gaussian-type orbitals, an explicit function of the electron-electron distance (geminal), and its associated excitation amplitudes held fixed at the values suggested by Ten-no. The integrals are directly evaluated (without a resolution-of-the-identity approximation or an auxiliary basis set) by the Metropolis Monte Carlo method. Applications of this method to 17 molecular correlation energies and 12 gas-phase reaction energies reveal that both the nonvariational and variational formulas for the correction give reliable correlation energies (98% or higher) and reaction energies (within 2 kJ mol -1 with a smaller statistical uncertainty) near the complete-basis-set limits by using just the aug-cc-pVDZ basis set. The nonvariational formula is found to be 2–10 times less expensive to evaluate than the variational one, though the latter yields energies that are bounded from below and is, therefore, slightly but systematically more accurate for energy differences. Being capable of using virtually any geminal form, the method confirms the best overall performance of the Slater-type geminal among 6 forms satisfying the same cusp conditions. Lastly, not having to precompute lower-dimensional integrals analytically, to store them on disk, or to transform them in a nonscalable dense-matrix-multiplication algorithm, the method scales favorably with both system size and computer size; the cost increases only as O(n 4 ) with the number of orbitals (n), and its parallel efficiency reaches 99.9% of the ideal case on going from 16 to 4096 computer processors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A bulk adjusted linear combination of atomic orbitals (BA-LCAO) approach for nanoparticles

We describe a bulk adjusted linear combination of atomic orbitals (BA-LCAO) approach for nanoparticles. In this method, we apply a many-body scaling function (in similar manner as in the environment-modified total energy based tight-binding method) to the DFT-derived diatomic AO interaction potentials (like in the conventional orbital-based density-functional tight binding approach) strictly according to atomic valences acquired naturally in a bulk structure. This modification, (a) facilitates all atom orbital-based electronic structure calculations of charge carrier dynamics in nanoscale structures with a molecular acceptor, and (b) allows to closely match high-level density functional calculation data (previously adjusted to the available experimental findings) for bulk structures. To advance practical application of the BA-LCAO approach we parameterize the Hamiltonian of wurtzite CdSe by fitting its band structure to a high-level DFT reference, corrected for experimentally measured band edges. Here, unlike in conventional DFTB approach, we: (1) use hydrogen-like AOs for the basis as exact atomic eigenfunctions, while orbital energies of which are taken from experimentally measured ionization potentials, and (2) parameterize the many-body scaling functions rather than the atomic wavefunctions. Development of this approach and parameters is guided by our aim to devise a method capable of simultaneously treating the problems of (i) interfacial electron/hole transfer between finite, variable size nanoparticles and electron scavenging molecules, and (ii) high-energy electronic transitions (Auger transitions) that mediate multi-exciton decay in quantum dots. Electronic structure results are described for CdSe quantum dots of various sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SYSTEMATIC BIASES IN THE OBSERVED DISTRIBUTION OF KUIPER BELT OBJECT ORBITS

The orbital distribution of Kuiper Belt objects (KBOs) provides important tests of solar system evolution models. However, our understanding of this orbital distribution can be affected by many observational biases. An important but difficult to quantify bias results from tracking selection effects; KBOs are recovered or lost depending on assumptions made about their orbital elements when fitting the initial (short) observational arc. Quantitatively studying the effects and significance of this bias is generally difficult, because only the objects where the assumptions were correct are recovered and thus available to study 'the problem', and because different observers use different assumptions and methods. We have used a sample of 38 KBOs that were discovered and tracked, bias-free, as part of the Canada-France Ecliptic Plane Survey to evaluate the potential for losing objects based on the two most common orbit and ephemeris prediction sources: the Minor Planet Center (MPC) and the Bernstein and Khushalani (BK) orbit fitting code. In both cases, we use early discovery and recovery astrometric measurements of the objects to generate ephemeris predictions that we then compare to later positional measurements; objects that have large differences between the predicted and actual positions would be unlikely to be recovered and are thus considered 'lost'. We find systematic differences in the orbit distributions which would result from using the two orbit-fitting procedures. In our sample, the MPC-derived orbit solutions lost slightly fewer objects (five out of 38) due to large ephemeris errors at one year recovery, but the objects which were lost belonged to more 'unusual' orbits such as scattering disk objects or objects with semimajor axes interior to the 3:2 resonance. Using the BK code, more objects (seven out of 38) would have been lost due to ephemeris errors, but the lost objects came from a range of orbital regions, primarily the classical belt region. We also compare the accuracy of orbits calculated from one year arcs against orbits calculated from multiple years of observations and find that two-opposition orbits without additional observations acquired at least two months from opposition are unreliable for dynamical modeling.

79 ASTRONOMY AND ASTROPHYSICS↗

Calibrating Optical Distortions in the Solar Orbiter SPICE Spectrograph

The Spectral Imaging of the Coronal Environment (SPICE) instrument on Solar Orbiter is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths from 70.4-79.0 nm and 97.3-104.9 nm. A single-mirror off-axis paraboloid focuses the solar image onto the entrance slit of the spectrometer section. A Toroidal Variable Line Space (TVLS) grating images the entrance slit onto a pair of MCP-intensified APS detectors. Ray-tracing analysis prior to launch showed that the instrument was subject to a number of small image distortions which need to be corrected in the final data product. We compare the ray tracing results with measurements made in flight. Co-alignment with other telescopes on Solar Orbiter will also be examined.

Therese Ann Kucera↗

TERRESTRIAL PLANET FORMATION FROM AN ANNULUS

It has been shown that some aspects of the terrestrial planets can be explained, particularly the Earth/Mars mass ratio, when they form from a truncated disk with an outer edge near 1.0 au. This has been previously modeled starting from an intermediate stage of growth utilizing pre-formed planetary embryos. We present simulations that were designed to test this idea by following the growth process from km-sized objects located between 0.7 and 1.0 au up to terrestrial planets. The simulations explore initial conditions where the solids in the disk are planetesimals with radii initially between 3 and 300 km, alternately including effects from a dissipating gaseous solar nebula and collisional fragmentation. We use a new Lagrangian code known as LIPAD, which is a particle-based code that models the fragmentation, accretion, and dynamical evolution of a large number of planetesimals, and can model the entire growth process from km-sizes up to planets. A suite of large (∼ Mars mass) planetary embryos is complete in only ∼1 Myr, containing most of the system mass. A quiescent period then persists for 10–20 Myr characterized by slow diffusion of the orbits and continued accretion of the remaining planetesimals. This is interrupted by an instability that leads to embryos crossing orbits and embryo–embryo impacts that eventually produce the final set of planets. While this evolution is different than that found in other works exploring an annulus, the final planetary systems are similar, with roughly the correct number of planets and good Mars-analogs.

79 ASTRONOMY AND ASTROPHYSICS↗

Downward quantum learning from element 118: Automated generation of Fermi–Löwdin orbitals for all atoms

A new algorithm based on a rigorous theorem and quantum data computationally mined from element 118 guarantees automated construction of initial Fermi–Löwdin-Orbital (FLO) starting points for all elements in the Periodic Table. It defines a means for constructing a small library of scalable FLOs for universal use in molecular and solid-state calculations. The method can be systematically improved for greater efficiency and for applications to excited states such as x-ray excitations and optically silent excitations. FLOs were introduced to recast the Perdew–Zunger self-interaction correction (PZSIC) into an explicit unitarily invariant form. The FLOs are generated from a set of N quasi-classical electron positions, referred to as Fermi-Orbital descriptors (FODs), and a set of N-orthonormal single-electron orbitals. FOD positions, when optimized, minimize the PZSIC total energy. However, creating sets of starting FODs that lead to a positive definite Fermi orbital overlap matrix has proven to be challenging for systems composed of open-shell atoms and ions. The proof herein guarantees the existence of a FLOSIC solution and further guarantees that if a solution for N electrons is found, it can be used to generate a minimum of N – 1 and a maximum of 2 N – 2 initial starting points for systems composed of a smaller number of electrons. As a result, applications to heavy and super-heavy atoms are presented. All starting solutions reported here were obtained from a solution for element 118, Oganesson.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benchmark relativistic delta-coupled-cluster calculations of K-edge core-ionization energies of third-row elements

Here a benchmark computational study of K-edge core-ionization energies of third-row elements using relativistic delta-coupled-cluster (ΔCC) methods and a revised core-valence separation (CVS) scheme is reported. High-level relativistic (HLR) corrections beyond the spin-free exact two-component theory in its one-electron variant (SFX2C-1e), including the contributions from two-electron picture-change effects, spin–orbit coupling, the Breit term, and quantum electrodynamics effects, have been taken into account and demonstrated to play an important role. Relativistic ΔCC calculations are shown to provide accurate results for core-ionization energies of third-row elements. The SFX2C-1e-CVS-ΔCC results augmented with HLR corrections show a maximum deviation of less than 0.5 eV with respect to experimental values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗