Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “open”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Nonlinear Oscillations and Flow of Gas Within Closed and Open Conical Resonators

A dissonant acoustic resonator with a conical shaped cavity was tested in four configurations: (A) baseline resonator with closed ends and no blockage; (B) closed resonator with internal blockage; (C) ventilated resonator with no blockage; and (D) ventilated resonator with an applied pressure differential. These tests were conducted to investigate the effects of blockage and ventilation holes on dynamic pressurization. Additionally, the investigation was to determine the ability of acoustic pressurization to impede flow through the resonator. In each of the configurations studied, the entire resonator was oscillated at the gas resonant frequency while dynamic pressure, static pressure, and temperature of the fluid were measured. In the final configuration, flow through the resonator was recorded for three oscillation conditions. Ambient condition air was used as the working fluid. The baseline results showed a marked reduction in the amplitude of the dynamic pressure waveforms over previously published studies due to the use of air instead of refrigerant as the working fluid. A change in the resonant frequency was recorded when blockages of differing geometries were used in the closed resonator, while acoustic pressure amplitudes were reduced from baseline measurements. A sharp reduction in the amplitude of the acoustic pressure waves was expected and recorded when ventilation ports were added. With elevated pressure applied to one end of the resonator, flow was reduced by oscillating the cavity at the fluid fundamental resonant frequency compared to cases without oscillation and oscillation off-resonance.

Daniels, Christopher↗

When Push Comes to Shove: Gap-opening, Disk Clearing and the In Situ Formation of Giant Planets

Here we investigate a scenario in which cores as small as a few Earth masses stall in the terrestrial planet region, but continue to grow as a result of the Type I migration of other Earth sized objects, taking place in a timescale approx. 10(exp 6) years similar to the disk clearing timescale (such migration may thus significantly reduce the accretion efficiency, particularly in the terrestrial planet region). Since the core may intercept such inwardly migrating objects (possibly by altering the surface density to the point that the object stalls within the core's feeding zone) or coalesce with neighboring cores, its growth may continue until it reaches a CCM. The question then arises whether such a core can accrete enough gas to become a Jovian-sized giant planet. In the limit of low opacity (such that the protoplanet s tidal torque fails to clear gas from its feeding zone in time to prevent its accretion), the final mass of the planet is given by the gaseous isolation mass (provided alpha is < or approx. = 10(exp -4) and that the gas component dominates the planet's mass).

Mosqueira, I.↗

Detecting the Sun in 2-Gyr Old Open Clusters

The aim of this observation was to take advantage of the large collecting area and sensitivity of the European Space Agency's XMM-Newton telescope to survey the X ray brightness of solar-mass stars in the 2 Gyr old NGC 752 cluster in order to chart out the dependence of coronal X ray emission of Sun like stars as a function of age. Dr. Simon's stated role as one of the co-investigators in the project was limited to assisting the project's European Principal Investigator with the analysis and interpretation of the X ray measurements, and to assist in summarizing the results for publication. The observation was executed successfully, and approximately 130 X ray sources were detected in the XMM field of view and subsequently measured to obtain X ray count rates. To date neither the measurements nor the raw data have been distributed by the European P.I. to the co-investigators, It is expected that the measurements will be distributed to the co-investigators by the end of 2004, and once that is done, the scientific analysis by Dr. Simon can then begin. At present, since the data and measurements have not been shared with the co-investigators, there are no results to report.

Simon, Theodore↗

A new method for the preparation of polymeric porous layer open tubular columns for GC application

A new method to prepare polymeric PLOT columns by using in situ polymerization technology is described. The method involves a straightforward in situ polymerization of the monomer. The polymer produced is directly coated on the metal tubing. This eliminates many of the steps needed in conventional polymeric PLOT column preparation. Our method is easy to operate and produces very reproducible columns, as shown previously (T. C. Shen. J. Chromatogr. Sci. 30, 239, 1992). The effects of solvents, tubing pretreatments, initiators and reaction temperatures in the preparation of PLOT columns are studied. Several columns have been developed to separate (1) highly polar compounds, such as water and ammonia or water and HCN, and (2) hydrocarbons and inert gases. A recent improvement has allowed us to produce bonded polymeric PLOT columns. These were studied, and the results are included also.

NASA Discipline Exobiology↗

Effects of CO2 on stomatal conductance: do stomata open at very high CO2 concentrations?

Potato and wheat plants were grown for 50 d at 400, 1000 and 10000 micromoles mol-1 carbon dioxide (CO2). and sweetpotato and soybean were grown at 1000 micromoles mol-1 CO2 in controlled environment chambers to study stomatal conductance and plant water use. Lighting was provided with fluorescent lamps as a 12 h photoperiod with 300 micromoles m-2 s-1 PAR. Mid-day stomatal conductances for potato were greatest at 400 and 10000 micromoles mol-1 and least at 1000 micromoles mol-1 CO2. Mid-day conductances for wheat were greatest at 400 micromoles mol-1 and least at 1000 and 10000 micromoles mol-1 CO2. Mid-dark period conductances for potato were significantly greater at 10000 micromoles mol-1 than at 400 or 1000 micromoles mol-1, whereas dark conductance for wheat was similar in all CO2 treatments. Temporarily changing the CO2 concentration from the native 1000 micromoles mol-1 to 400 micromoles mol-1 increased mid-day conductance for all species, while temporarily changing from 1000 to 10000 micromoles mol-1 also increased conductance for potato and sweetpotato. Temporarily changing the dark period CO2 from 1000 to 10000 micromoles mol-1 increased conductance for potato, soybean and sweetpotato. In all cases, the stomatal responses were reversible, i.e. conductances returned to original rates following temporary changes in CO2 concentration. Canopy water use for potato was greatest at 10000, intermediate at 400, and least at 1000 micromoles mol-1 CO2, whereas canopy water use for wheat was greatest at 400 and similar at 1000 and 10000 micromoles mol-1 CO2. Elevated CO2 treatments (i.e. 1000 and 10000 micromoles mol-1) resulted in increased plant biomass for both wheat and potato relative to 400 micromoles mol-1, and no injurious effects were apparent from the 10000 micromoles mol-1 treatment. Results indicate that super-elevated CO2 (i.e. 10000 micromoles mol-1) can increase stomatal conductance in some species, particularly during the dark period, resulting in increased water use and decreased water use efficiency.

NASA Discipline Life Support Systems↗

Open house HDTV stereo video

Explore the source record for details and available documents.

Sun Earth asteroid Mars Viking Pathfinder Io cosmi↗