SEARCH · Engineering Papers

Results for “identifiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Comment

An examination of ion concentration data from the AE-E, AE-C, and DE-2 spacecraft did not detect the small-comet influx into the upper atmosphere predicted by Frank et al. (1986). It is suggested that either the proposed cometary flux is overestimated by over an order of magnitude, or that the ionospheric signature used is not presently defined properly. In a reply, Frank et al. describe a more direct method for identifying the mechanisms participating in the interaction of the cometary water cloud with the ionosphere: examining DE-1 spacecraft images of the earth's UV afterglow for a crossing of a transient decrease, or atmospheric hole, with the DE-2 spacecraft, and verifying if the ionospheric signature identified with this crossing is noted at other times in the quiet atmosphere. A possible signature of the passage of the cometary water cloud through the ionosphere is identified, and a mode for this interaction is indicated.

Hanson, W. B.↗

NASA NTRS1986

A feasibility assessment of nuclear reactor power system concepts for the NASA Growth Space Station

A preliminary feasibility assessment of the integration of reactor power system concepts with a projected growth Space Station architecture was conducted to address a variety of installation, operational, disposition and safety issues. A previous NASA sponsored study, which showed the advantages of Space Station - attached concepts, served as the basis for this study. A study methodology was defined and implemented to assess compatible combinations of reactor power installation concepts, disposal destinations, and propulsion methods. Three installation concepts that met a set of integration criteria were characterized from a configuration and operational viewpoint, with end-of-life disposal mass identified. Disposal destinations that met current aerospace nuclear safety criteria were identified and characterized from an operational and energy requirements viewpoint, with delta-V energy requirement as a key parameter. Chemical propulsion methods that met current and near-term application criteria were identified and payload mass and delta-V capabilities were characterized. These capabilities were matched against concept disposal mass and destination delta-V requirements to provide a feasibility of each combination.

Bloomfield, H. S.↗

NASA NTRS1986

The Draco cloud as a matrix of potential protostars

The Draco molecular cloud is inbound at a z distance of a few hundred parsecs, according to previous observations. IRAS Point Source Catalog data for a 36 sq deg area that includes most of the cloud and a comparison area around it are tabulated, illustrated, and discussed. The sources are classified as 56 unidentified, 38 identified extragalactic objects, and 44 identified stars. The unidentified and unresolved 100 micron sources appear to be globule-like clumps that are candidates for producing protostars, although the data cannot demonstrate currently accreting protostars in the globules. An undetermined percent of 100 micron sources may be artifactual, but only a small percent of them may be galaxies because of the adherence to the Draco cloud. Sources detected also at 60 micron or only at 60 micron do not adhere to the cloud and are probably galaxies. Unless artifactual the unidentified and unresolved 100 micron sources may provide considerable new information about the cloud components and therefore about potential star formation in a new class of sites and origins. Six unidentified sources have 12-25 micron stellar spectral distributions, but neither they nor the identified stars have 12-25 micron spectra characteristic of T Tauri stars.

Johnson, Hugh M.↗

NASA NTRS1986

On the selection and evaluation of visual display symbology Factors influencing search and identification times

Three single-target visual search tasks were used to evaluate a set of cathode-ray tube (CRT) symbols for a helicopter situation display. The search tasks were representative of the information extraction required in practice, and reaction time was used to measure the efficiency with which symbols could be located and identified. Familiar numeric symbols were responded to more quickly than graphic symbols. The addition of modifier symbols, such as a nearby flashing dot or surrounding square, had a greater disruptive effect on the graphic symbols than did the numeric characters. The results suggest that a symbol set is, in some respects, like a list that must be learned. Factors that affect the time to identify items in a memory task, such as familiarity and visual discriminability, also affect the time to identify symbols. This analogy has broad implications for the design of symbol sets. An attempt was made to model information access with this class of display.

Remington, Roger↗

NASA NTRS1987

Solar activity and heliosphere-wide cosmic ray modulation in mid-1982

A plausible candidate flare is identified for each of the four major Forbush-like decrease events that were observed in the outer heliosphere in mid-1982. The associations are as follows: (1) FD 1 at P10 - backside flare at W152 deg on June 3; (2) FD 1 at P11 - 2B flare at E25 deg on June 6; (3) FD2 at P11 - 3B flare at E36 deg on July 12; and (4) FD 2 at P10 - 1N limb flare at W100 deg on July 22. In each case, the identified flare was 35 deg or less in ecliptic longitude from the affected satellite. There is no compelling evidence from near-sun spacecraft observations that the shocks from any of the four identified flares encompassed both P10 and P11. A significant fraction of the major near-sun interplanetary disturbances during June and July of 1982 arose in the relatively narrow range of Carrington longitude from 275-320 deg.

Cliver, E. W.↗

NASA NTRS1986

Full-envelope aerodynamic modeling of the Harrier aircraft

A project to identify a full-envelope model of the YAV-8B Harrier using flight-test and parameter identification techniques is described. As part of the research in advanced control and display concepts for V/STOL aircraft, a full-envelope aerodynamic model of the Harrier is identified, using mathematical model structures and parameter identification methods. A global-polynomial model structure is also used as a basis for the identification of the YAV-8B aerodynamic model. State estimation methods are used to ensure flight data consistency prior to parameter identification.Equation-error methods are used to identify model parameters. A fixed-base simulator is used extensively to develop flight test procedures and to validate parameter identification software. Using simple flight maneuvers, a simulated data set was created covering the YAV-8B flight envelope from about 0.3 to 0.7 Mach and about -5 to 15 deg angle of attack. A singular value decomposition implementation of the equation-error approach produced good parameter estimates based on this simulated data set.

Mcnally, B. David↗

NASA NTRS1987

Mapping hydrothermally altered rocks in the Northern Grapevine Mountains, Nevada and California with the airborne imaging spectrometer

Seven flightlines of Airborne Imaging Spectrometer (AIS) data were analyzed for an area of hydrothermally altered rocks. The data were reduced to reflectance relative to an average spectrum, and an automated procedure was used to produce a color coded image displaying absorption band information. Individual spectra were extracted from the AIS images to determine the detailed mineralogy. Two alteration types were mapped based upon mineralogy identified using the AIS data. The primary alteration type is quartz sericite pyrite alteration which occurs in northwest-trending zones in quartz monzonite porphyry. The AIS data allow identification of sericite (muscovite) based upon a strong absorption feature near 2.21 micron and weaker absorption features near 2.35 and 2.45 micron. The second alteration type occurs as a zone of argillic alteration associated with a granitic intrusion. Montmorillonite was identified based on a weak to moderate absorption feature near 2.2 micron and the absence of the two absorption features at longer wavelengths characteristic of sericite. Montmorillonite could be identified only where concentrations of sericite did not mask the montmorillonite spectrum.

Kruse, Fred A.↗

NASA NTRS1987

Crew procedures for microwave landing system operations

The objective of this study was to identify crew procedures involved in Microwave Landing System (MLS) operations and to obtain a preliminary assessment of crew workload. The crew procedures were identified for three different complements of airborne equipment coupled to an autopilot. Using these three equipment complements, crew tasks were identified for MLS approaches and precision departures and compared to an ILS approach and a normal departure. Workload comparisons between the approaches and departures were made by using a task-timeline analysis program that obtained workload indexes, i.e., the radio of time required to complete the tasks to the time available. The results showed an increase in workload for the MLS scenario for one of the equipment complements. However, even this workload was within the capacity of two crew members.

Summers, Leland G.↗

NASA NTRS1987

Crew interface with a telerobotic control station

A method for apportioning crew-telerobot tasks has been derived to facilitate the design of a crew-friendly telerobot control station. To identify the most appropriate state-of-the-art hardware for the control station, task apportionment must first be conducted to identify if an astronaut or a telerobot is best to execute the task and which displays and controls are required for monitoring and performance. Basic steps that comprise the task analysis process are: (1) identify space station tasks; (2) define tasks; (3) define task performance criteria and perform task apportionment; (4) verify task apportionment; (5) generate control station requirements; (6) develop design concepts to meet requirements; and (7) test and verify design concepts.

Mok, Eva↗

NASA NTRS1986

Workshop on Technology Development Issues for the Large Deployable Reflector (LDR)

The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology.

Nishioka, Kenji↗

NASA NTRS1987

Adaptive identification and control for manipulators without using joint accelerations

The authors present a new scheme for the adaptive control of mechanical manipulators along with proof of convergence. Difficulties encountered in the input-error type adaptive controller are remedied by combining an explicit identifier with discrete time updates of the parameter values along with a computed torque type control law. The new scheme requires no matrix inversion with its consequent drain on the computational power of the controller. A discussion is presented of the dynamic model of a manipulator, a computed torque adaptive scheme, an input error identifier, and a hybrid identifier.

Hsu, Ping↗

NASA NTRS1988

Identification of differences between finite element analysis and experimental vibration data

An important problem that has emerged from combined analytical/experimental investigations is the task of identifying and quantifying the differences between results predicted by F.E. analysis and results obtained from experiment. The objective of this study is to extend and evaluate the procedure developed by Sidhu for correlation of linear F.E. and modal test data to include structures with viscous damping. The desirability of developing this procedure is that the differences are identified in terms of physical mass, damping, and stiffness parameters instead of in terms of frequencies and modes shapes. Since the differences are computed in terms of physical parameters, locations of modeling problems can be directly identified in the F.E. model. From simulated data it was determined that the accuracy of the computed differences increases as the number of experimentally measured modes included in the calculations is increased. When the number of experimental modes is at least equal to the number of translational degrees of freedom in the F.E. model both the location and magnitude of the differences can be computed very accurately. When the number of modes is less than this amount the location of the differences may be determined even though their magnitudes will be underestimated.

Lawrence, Charles↗

NASA NTRS1988

Flow-induced vibrations of the SSME LOX inlet tee vanes

This paper describes the results of a program initiated to identify the cause and the mechanism of 4-kHz vibrations of the Space Shuttle main engine's (SSME's) LOX inlet tee, which were revealed in 17 percent of the SSMEs during ground tests. The results of the engines' inspection, structural analyses, computational fluid dynamics studies, literature reviews, expert consultations, and laboratory testings identified the probable cause of the 4-kHz vibrations being related to the fact that the walls of some tees were thinner than in the mojority of tees, resulting in less stiff structures. The mechanism of the vibrations was identified as vortex shedding in combination with a structural coupling with the thrust cone, which increased the vane mobility, which, in turn, aggravated the fluid coupling with the thrust cone. As a result, the vane mobility was increased, aggravating the fluid coupling with the vanes. An internal modification was developed and was successfully demonstrated on an engine that had previously exhibited a 4-kHz problem.

O'Connor, G. M.↗

NASA NTRS1988

Comparative study of career development and training programs

Improvement of human capital has been identified as the key to any further increase of productivity for any country engaged in the global economic competition. The same can be said of any organization seeking to enhance its overall performance. This study is aimed at: (1) surveying the current practices of career development and training programs at major corporations and government research organizations; (2) presenting the distributions of various program features among survey respondents; (3) identifying the profile of the training program of a typical research organization, against which each organization can check and identify its relative strengths as well as areas needing further strengthening; (4) conducting an economic analysis of the effectiveness of the training programs at Langley Research Center; and (5) making recommendations as to how to enhance existing training programs.

Tsao, Alan↗

NASA NTRS1988

The influence of and the identification of nonlinearity in flexible structures

Several models were built at NASA Langley and used to demonstrate the following nonlinear behavior: internal resonance in a free response, principal parametric resonance and subcritical instability in a cantilever beam-lumped mass structure, combination resonance in a parametrically excited flexible beam, autoparametric interaction in a two-degree-of-freedom system, instability of the linear solution, saturation of the excited mode, subharmonic bifurcation, and chaotic responses. A video tape documenting these phenomena was made. An attempt to identify a simple structure consisting of two light-weight beams and two lumped masses using the Eigensystem Realization Algorithm showed the inherent difficulty of using a linear based theory to identify a particular nonlinearity. Preliminary results show the technique requires novel interpretation, and hence may not be useful for structural modes that are coupled by a guadratic nonlinearity. A literature survey was also completed on recent work in parametrically excited nonlinear system. In summary, nonlinear systems may possess unique behaviors that require nonlinear identification techniques based on an understanding of how nonlinearity affects the dynamic response of structures. In this was, the unique behaviors of nonlinear systems may be properly identified. Moreover, more accutate quantifiable estimates can be made once the qualitative model has been determined.

Zavodney, Lawrence D.↗

NASA NTRS1986

A distributable APSE

A distributed Ada program library is a key element in a distributed Ada Program Support Environment (APSE). To implement this successfully, the program library universe as defined by the Ada Reference Manual must be broken up into independently manageable pieces. This in turn requires the support of a distributed database system, as well as a mechanism for identifying compilation units, linkable subprograms, and Ada types in a decentralized way, to avoid falling victim to the bottlenecks of a global database and/or global unique-identifier manager. It was found that the ability to decentralize Ada program library activity is a major advantage in the management of large Ada programs. Currently, there are 18 resource-catalog revision sets, each in its own Host Interface (HIF) partition, plus 18 partitions for testing each of these, plus 11 partitions for the top-level compiler/linker/program library manager components. Compiling and other development work can proceed in parallel in each of these partitions, without suffering the performance bottlenecks of global locks or global unique-identifier generation.

Taft, Tucker, S.↗

NASA NTRS1988

The potential impact of MMICs on future satellite communications

This is the Final Report representing the results of a 17-month study on the future trends and requirements of Monolithic Microwave Integrated Circuits (MMIC) for space communication applications. Specifically this report identifies potential space communication applications of MMICs, assesses the impact of MMIC on the classes of systems that were identified, determines the present status and probable 10-year growth in capability of required MMIC and competing technologies, identifies the applications most likely to benefit from further MMIC development and presents recommendations for NASA development activities to address the needs of these applications.

Dunn, Vernon E.↗

NASA NTRS1988

The potential impact of MMICs on future satellite communications: Executive summary

This Executive Summary presents the results of a 17-month study on the future trends and requirments for Monolithic Microwave Integrated circuits (MMIC) for space communication application. Specifically this report identifies potential space communication applications of MMICs, assesses the impact of MMIC on the classes of systems that were identified, determines the present status and probable 10-year growth in capability of required MMIC and competing technologies, identifies the applications most likely to benefit from further MMIC development, and presents recommendations for NASA development activities to address the needs of these applications.

Dunn, Vernon E.↗