Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “future of computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Graphic statics and their potential for digital design and fabrication with concrete

The paper describes the influence of the lower bound theorem of theory of plasticity on the design of structures during the last 70 years. Starting with the fundamental theorems developed in the middle of the last century, the influence of rigid plastic (discontinuous) stress fields on the design of reinforced beam, wall, slab and shell structures is worked out. The potential of graphic statics for digital design and fabrication is illustrated by the results of several research projects on form finding and design of reinforced concrete structures carried out during the last decade. It is shown that the design methods allow for simultaneous considerations about structure and architecture. This leads to leaner structure and reduced material consumption. However, while a current limitation of manufacturing objects in these ''nonstandard'' shapes is presently cost limiting, digital fabrication may change this and open a much greater scope for the use and application of graphic statics in a near future.

36 MATERIALS SCIENCE↗

Rafting and elastoplastic deformation of superalloys studied by neutron diffraction

The rafting of monocrystalline Ni- and Co-based superalloys has been studied by neutron diffractometry. Lattice parameter misfit values and the difference in phase stiffnesses at room temperature, 650 °C, and 900 °C are presented. These microstructural parameters should assist in refining computer models that aim to predict precipitate evolution in superalloys and aid future alloy design. The nature of rafting is shown experimentally to be dependent upon the lattice parameter misfit. The 900 °C yield strength of the γ-phase of the Co-based superalloy with a rafted microstructure occurs at ~100 MPa, when loaded at a low strain rate.

36 MATERIALS SCIENCE↗

Bridging Scales in Bioenergy and Catalysis: A Review of Mesoscale Modeling Applications, Methods, and Future Directions

Between the molecular and reactor scales, which are familiar to the chemical engineering community, lies an intermediate regime, here termed the “mesoscale,” where transport phenomena and reaction kinetics compete on similar time scales. Bioenergy and catalytic processes offer particularly important examples of mesoscale phenomena owing to their multiphase nature and the complex, highly variable porosity characteristic of biomass and many structured catalysts. In this review, we overview applications and methods central to mesoscale modeling as they apply to reaction engineering of biomass conversion and catalytic processing. A brief historical perspective is offered to put recent advances in context. Applications of mesoscale modeling are described, and several specific examples from biomass pyrolysis and catalytic upgrading of bioderived intermediates are highlighted. Methods including reduced order modeling, finite element and finite volume approaches, geometry construction and import, and visualization of simulation results are described; in each category, recent advances, current limitations, and areas for future development are presented. Owing to improved access to high-performance computational resources, advances in algorithm development, and sustained interest in reaction engineering to sustainably meet societal needs, we conclude that a significant upsurge in mesoscale modeling capabilities is on the horizon that will accelerate design, deployment, and optimization of new bioenergy and catalytic technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constructing the Mechanism of Dinoflagellate Luciferin Bioluminescence Using Computation

Dinoflagellate luciferin bioluminescence is unique since it does not rely on decarboxylation but is poorly understood compared to that of firefly, bacteria, and coelenterata luciferins. Here, in this work, we computationally investigate possible protonation states, stereoisomers, a chemical mechanism, and the dynamics of the bioluminescence intermediate that is responsible for chemiexcitation. Using semiempirical dynamics, time-dependent density functional theory static calculations, and a correlation diagram, we find that the intermediate’s functional group that is likely responsible for chemiexcitation is a 4-member ring, a dioxetanol, that undergoes [2π + 2π] cycloreversion and the biolumiphore is the cleaved structure. The simulated emission spectra and luciferase-dependent absorbance spectra agree with the experimental data, giving support to our proposed mechanism and biolumiphore. We also compute circular dichroism spectra of the intermediate’s four stereoisomers to guide future experiments in differentiating them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain release by 3D atomic misfit in fivefold twinned icosahedral nanoparticles with amorphization and dislocations

Multiple twinning to form fivefold twinned nanoparticles in crystal growth is common and has attracted broad attention ranging from crystallography research to physical chemistry and materials science. Lattice-misfit strain and defects in multiple twinned nanoparticles (MTP) are key to understand and tailor their electronic properties. However, the structural defects and related strain distributions in MTPs are poorly understood in three dimensions (3D). Here, we show the 3D atomic misfit and strain relief mechanism in fivefold twinned icosahedral nanoparticles with amorphization and dislocations by using atomic resolution electron tomography. We discover a two-sided heterogeneity in variety of structural characteristics. A nearly ideal crystallographic fivefold face is always found opposite to a less ordered face, forming Janus-like icosahedral nanoparticles with two distinct hemispheres. The disordered amorphous domains release a large amount of strain. Molecular dynamics simulations further reveal the Janus-like icosahedral nanoparticles are prevalent in the MTPs formed in liquid-solid phase transition. This work provides insights on the atomistic models for the modelling of formation mechanisms of fivefold twinned structures and computational simulations of lattice distortions and defects. We anticipate it will inspire future studies on fundamental problems such as twin boundary migration and kinetics of structures in 3D at atomic level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Matrix product operators, matrix product states, and ab initio density matrix renormalization group algorithms

Current descriptions of the ab initio density matrix renormalization group (DMRG) algorithm use two superficially different languages: an older language of the renormalization group and renormalized operators, and a more recent language of matrix product states and matrix product operators. The same algorithm can appear dramatically different when written in the two different vocabularies. Here, we carefully describe the translation between the two languages in several contexts. First, we describe how to efficiently implement the ab initio DMRG sweep using a matrix product operator based code, and the equivalence to the original renormalized operator implementation. Next we describe how to implement the general matrix product operator/matrix product state algebra within a pure renormalized operator-based DMRG code. Finally, we discuss two improvements of the ab initio DMRG sweep algorithm motivated by matrix product operator language: Hamiltonian compression, and a sum over operators representation that allows for perfect computational parallelism. The connections and correspondences described here serve to link the future developments with the past and are important in the efficient implementation of continuing advances in ab initio DMRG and related algorithms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring solvation structure and transport behavior for rational design of advanced electrolytes for next generation of lithium batteries

The efficacy of electrolytes significantly affects battery performance, leading to the development of several strategies to enhance them. Despite this, the understanding of solvation structure remains inadequate. It is imperative to understand the structure–property–performance relationship of electrolytes using diverse techniques. Here, this review explores the recent advancements in electrolyte design strategies for high capacity, high-voltage, wide-temperature, fast-charging, and safe applications. To begin, the current state-of-the-art electrolyte design directions are comprehensively reviewed. Subsequently, advanced techniques and computational methods used to understand the solvation structure are discussed. Additionally, the importance of high-throughput screening and advanced computation of electrolytes with the help of machine learning is emphasized. Finally, future horizons for studying electrolytes are proposed, aimed at improving battery performance and promoting their application in various fields by enhancing the microscopic understanding of electrolytes.

25 ENERGY STORAGE↗

Multiphysics Running-In Simulations for Pebble-Bed Reactors with Griffin

Griffin, a Multiphysics Object-Oriented Simulation Environment (MOOSE)–based application targeting transient modeling of advanced reactors, has been used recently to model pebble-bed reactors (PBRs). The modeling effort has focused thus far on equilibrium core calculations. A new capability to simulate the running-in phase of PBR operation has been added to Griffin. This work demonstrates the new capability with a coupled multiphysics running-in simulation. Griffin computes power densities in the core at each time step of the running-in simulation and passes these to Pronghorn, which models fluid flow and heat transfer to calculate pebble surface temperatures. These surface temperatures are used along with the power densities in a heat conduction model to compute average fuel and moderator temperatures, which are passed back to Griffin and accounted for with temperature-dependent cross sections. This work also describes a novel methodology for determining appropriate pebble feed rates and control rod positioning during the running-in simulation. Furthermore, the RZ-geometry model used in this work requires minimal computational resources and can be used for optimization and uncertainty studies in future works.

Griffin↗

A SEMI-ANALYTICAL MODEL OF VISIBLE-WAVELENGTH PHASE CURVES OF EXOPLANETS AND APPLICATIONS TO KEPLER- 7 B AND KEPLER- 10 B

Kepler has detected numerous exoplanet transits by measuring stellar light in a single visible-wavelength band. In addition to detection, the precise photometry provides phase curves of exoplanets, which can be used to study the dynamic processes on these planets. However, the interpretation of these observations can be complicated by the fact that visible-wavelength phase curves can represent both thermal emission and scattering from the planets. Here we present a semi-analytical model framework that can be applied to study Kepler and future visible-wavelength phase curve observations of exoplanets. The model efficiently computes reflection and thermal emission components for both rocky and gaseous planets, considering both homogeneous and inhomogeneous surfaces or atmospheres. We analyze the phase curves of the gaseous planet Kepler- 7 b and the rocky planet Kepler- 10 b using the model. In general, we find that a hot exoplanet’s visible-wavelength phase curve having a significant phase offset can usually be explained by two classes of solutions: one class requires a thermal hot spot shifted to one side of the substellar point, and the other class requires reflective clouds concentrated on the same side of the substellar point. Particularly for Kepler- 7 b, reflective clouds located on the west side of the substellar point can best explain its phase curve. The reflectivity of the clear part of the atmosphere should be less than 7% and that of the cloudy part should be greater than 80%, and the cloud boundary should be located at 11° ± 3° to the west of the substellar point. We suggest single-band photometry surveys could yield valuable information on exoplanet atmospheres and surfaces.

79 ASTRONOMY AND ASTROPHYSICS↗

Fourth level MSSM inflation from new flat directions

We propose a model of inflation driven by minimal extension of SUSY, commonly known as MSSM. Starting from gauge invariant flat directions in the n = 4 level comprising of QQQL,QuQd,QuLe and uude, we construct the inflaton potential and employ it to investigate for its consequences around the saddle point arising from the non-vanishing fourth derivative of the original potential. To this end, we derive the expressions for the important parameters in MSSM inflation using the loop corrected potential. We further estimate the observable parameters and find them to fit well with recent observational data from WMAP7 by using the code CAMB. We also explore the possibility of primordial black hole formation from our model. Finally, we analyze one loop RGE and compute different phenomenological parameters which could be precisely determined in LHC or future Linear Colliders.

79 ASTRONOMY AND ASTROPHYSICS↗

The mechanics of brittle granular materials with coevolving grain size and shape

The influence of particle shape on the mechanics of sand is widely recognized, especially in mineral processing and geomechanics. However, most existing continuum theories for engineering applications do not encompass the morphology of the grains and its evolution during comminution. Similarly, the relatively few engineering models accounting for grain-scale processes tend to idealize particles as spheres, with their diameters considered as the primary and sole geometric descriptor. This paper inspires a new generation of constitutive laws for crushable granular continua with arbitrary, yet evolving, particle morphology. We explore the idea of introducing multiple grain shape descriptors into Continuum Breakage Mechanics (CBM), a theory originally designed to track changes in particle size distributions during confined comminution. We incorporate the influence of these descriptors on the elastic strain energy potential and treat them as dissipative state variables. In analogy with the original CBM, and in light of evidence from extreme fragmentation in nature, the evolution of the additional shape descriptors is postulated to converge towards an attractor. Comparisons with laboratory experiments, discrete element analyses and particle-scale fracture models illustrate the encouraging performance of the theory. The theory provides insights into the feedback among particle shape, compressive yielding and inelastic deformation in crushable granular continua. These results inspire new questions that should guide future research into crushable granular systems using particle-scale imaging and computations.

36 MATERIALS SCIENCE↗

Coupled-channel scattering on a torus

Based on the Hamiltonian formalism approach, a generalized Luscher's formula for two particle scattering in both the elastic and coupled-channel cases in moving frames is derived from a relativistic Lippmann-Schwinger equation. Some strategies for extracting scattering amplitudes for a coupled-channel system from the discrete finite-volume spectrum are discussed and illustrated with a toy model of two-channel resonant scattering. This formalism will, in the near future, be used to extract information about hadron scattering from lattice QCD computations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Scaling Graph Community Detection on the Tilera Many-core Architecture

In an era when power constraints and data movement are proving to be significant barriers for the application of high-end computing, the Tilera many-core architecture offers a low-power platform exhibiting many important characteristics of future systems, including a large number of simple cores, a sophisticated network-on-chip, and fine-grained control over memory and caching policies. While this emerging architecture has been previously studied for structured compute-intensive kernels, benchmarking the platform for data-bound, irregular applications present significant challenges that have remained unexplored. Community detection is an advanced prototypical graph-theoretic operation with applications in numerous scientific domains including life sciences, cyber security, and power systems. In this work, we explore multiple design strategies toward developing a scalable tool for community detection on the Tilera platform. Using several memory layout and work scheduling techniques we demonstrate speedups of up to 46x on 36 cores of the Tilera TileGX36 platform over the best serial implementation, and also show results that have comparable quality and performance to mainstream x86 platforms. To the best of our knowledge this is the first work addressing graph algorithms on the Tilera platform. This study demonstrates that through careful design space exploration, low-power many-core platforms like Tilera can be effectively exploited for graph algorithms that that embody all the essential characteristics of an irregular application.

community detection↗

Soils' dirty little secret: Depth–based comparisons can be inadequate for quantifying changes in soil organic carbon and other mineral soil properties

Quantifying changes in soil organic carbon (SOC) stocks and other soil properties is essential for understanding how soils will respond to land management practices and global change. Although they are widely used, comparisons of SOC stocks at fixed depth (FD) intervals are subject to errors when changes in bulk density or soil organic matter occur. The equivalent soil mass (ESM) method has been recommended in lieu of FD for assessing changes in SOC stocks in mineral soils, but ESM remains underutilized for SOC stocks and has rarely been used for other soil properties. In this paper, we draw attention to the limitations of the FD method and demonstrate the advantages of the ESM approach. We provide illustrations to show that the FD approach is susceptible to errors not only for quantifying SOC stocks but also for soil mass-based properties such as SOC mass percent, C:N mass ratio, and δ 13 C. Here we describe the ESM approach and show how it mitigates the FD method limitations. Using bulk density change simulations applied to an empirical dataset from bioenergy cropping systems, we show that the ESM method provides consistently lower errors than FD when quantifying changes in SOC stocks and other soil properties. To simplify the use of ESM, we detail how the method can be integrated into sampling schemes, and we provide an example R computer script that can perform ESM calculations on large datasets. We encourage future studies, whether temporal or comparative, to utilize sampling methods that are amenable to the ESM approach. Overall, we agree with previous recommendations that ESM should be the standard method for evaluating SOC stock changes in mineral soils, but we further suggest that ESM may also be preferred for comparisons of other soil properties including mass percentages, elemental mass ratios, and stable isotope composition.

59 BASIC BIOLOGICAL SCIENCES↗

Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials

We report additive manufacturing (AM) has enabled the creation of a near infinite set of functionally graded materials (FGMs). One limitation on the manufacturability and usefulness of these materials is the presence of undesirable phases along the gradient path. For example, such phases may increase brittleness, diminish corrosion resistance, or severely compromise the printability of the part altogether. In the current work, a design methodology is proposed to plan an FGM gradient path for any number of elements that avoids undesirable phases at a range of temperatures. Gradient paths can also be optimized for a cost function. A case study is shown to demonstrate the effectiveness of the methodology in the Fe–Ni–Cr system. Paths were successfully planned from 316 L Stainless Steel (316 L SS) to pure Cr that either minimize path length or maximize separation from undesirable phases. Examinations on the stochastic variability, parameter dependency, and computational efficiency of the method are also presented. Finally, several avenues of future research are proposed that could improve the manufacturability, utility, and performance of FGMs through gradient path design.

36 MATERIALS SCIENCE↗

Calorimetry with deep learning: particle simulation and reconstruction for collider physics

Using detailed simulations of calorimeter showers as training data, we investigate the use of deep learning algorithms for the simulation and reconstruction of single isolated particles produced in high-energy physics collisions. We train neural networks on single-particle shower data at the calorimeter-cell level, and show significant improvements for simulation and reconstruction when using these networks compared to methods which rely on currently-used state-of-the-art algorithms. We define two models: an end-to-end reconstruction network which performs simultaneous particle identification and energy regression of particles when given calorimeter shower data, and a generative network which can provide reasonable modeling of calorimeter showers for different particle types at specified angles and energies. We investigate the optimization of our models with hyperparameter scans. Furthermore, we demonstrate the applicability of the reconstruction model to shower inputs from other detector geometries, specifically ATLAS-like and CMS-like geometries. These networks can serve as fast and computationally light methods for particle shower simulation and reconstruction for current and future experiments at particle colliders.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Current UAS Capabilities for Geospatial Spectral Solutions

Unmanned aerial systems (UAS) are playing an increasingly pivotal role in advancing the remote collection of data. The various datasets collected by these cutting-edge systems provide near-real-time information and help inform end users on everything from disaster recovery efforts to monitoring atmospheric constituents. This chapter focuses on how the collection of imagery has progressed over time, including the pivotal role UAS play in building large-scale datasets driving data analysis. The authors report the findings of a 2018–2021 survey of the fields that use UAS, the UAS platforms most commonly used, and the sensor components users select to outfit their UAS. The chapter will also discuss the range of platforms currently available, with a specific focus on issues including battery life, data downlinks, data processing times, edge computing, and availability of new sensors. The authors will also discuss the future direction of UAS platforms as well as many of the problems associated with the high spatial and temporal resolution of modern geospatial datasets.

Cotten, David↗

Large-Scale Test of Dynamic Correlation Processors: Implications for Correlation-Based Seismic Pipelines

Correlation detectors are of considerable interest to the seismic monitoring communities because they offer reduced detection thresholds and combine detection, location and identification functions into a single operation. They appear to be ideal for applications requiring screening of frequent repeating events. However, questions remain about how broadly empirical correlation methods are applicable. We describe the effectiveness of banks of correlation detectors in a system that combines traditional power detectors with correlation detectors in terms of efficiency, which we define to be the fraction of events detected by the correlators. This paper elaborates and extends the concept of a dynamic correlation detection framework – a system which autonomously creates correlation detectors from event waveforms detected by power detectors; and reports observed performance on a network of arrays in terms of efficiency. We performed a large scale test of dynamic correlation processors on an 11 terabyte global dataset using 25 arrays in the single frequency band 1-3 Hz. The system found over 3.2 million unique signals and produced 459,747 screened detections. A very satisfying result is that, on average, efficiency grows with time and, after nearly 16 years of operation, exceeds 47% for events observed over all distance ranges and approaches 70% for near regional and 90% for local events. This observation suggests that future pipeline architectures should make extensive use of correlation detectors, principally for decluttering observations of local and near-regional events. Our results also suggest that future operations based on correlation detection will require commodity large-scale computing infrastructure, since the numbers of correlators in an autonomous system can grow into the hundreds of thousands.

47 OTHER INSTRUMENTATION↗