Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flight computer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Solution to the hidden-line problem

It is pointed out that realistic three-dimensional renderings of solid objects or surfaces by computers have long been needed. The NASA Dryden Flight Research Center will soon publish a report and the computer program on an algorithm that solves for hidden lines. The computer program is written in FORTRAN IV and its size is approximately 35N + 9500 words, where N is the number of elements. A number of pictures are presented which were drawn by a computer using the algorithm.

Hedgley, D. R.↗
NASA NTRS1985

Selection of a model of Earth's albedo radiation, practical calculation of its effect on the trajectory of a satellite

Theoretical models of Earth's albedo radiation was proposed. By comparing disturbing accelerations computed from a model to those measured in flight with the CACTUS Accelerometer, modified according to the results. Computation of the satellite orbit perturbations from a model is very long because for each position of this satellite the fluxes coming from each elementary surface of the terrestrial portion visible from the satellite must be summed. The speed of computation is increased ten times without significant loss of accuracy thanks to a stocking of some intermediate results. Now it is possible to confront the orbit perturbations computed from the selected model with the measurements of these perturbations found with satellite as LAGEOS.

Walch, J. J.↗
NASA NTRS2016

Spiral Lamber's Problem with Generalized Logarithmic Spirals

Lambert’s problem subject to a continuous acceleration is solved using the family of generalized logarithmic spirals. Thanks to the existence of two first integrals related to the energy and angular momentum surprising analogies with the Keplerian case are found. A minimum-energy spiral transfer exists. Increasing the value of the constant of the generalized energy yields pairs of conjugate spiral trajectories. The properties of such spirals are strongly connected with the properties of conjugate Keplerian orbits. When the generalized constant of the energy reaches a critical value the two solutions degenerate into a pair of parabolic spirals, one of which connects the two vectors through infinity. From that point the spiral transfers become hyperbolic. Generalized logarithmic spirals admit closed-form solutions to all the required magnitudes including the time of flight, providing a deep insight into the dynamics of the problem. In addition, the maximum acceleration along the transfer is found analytically so the solutions that violate the design constraints on the maximum thrust acceleration can be rejected without any further computations. When the time of flight is fixed there is still a degree of freedom in the solution, related to a control parameter. Resonant transfers appear naturally thanks to the symmetry properties of the generalized logarithmic spirals. The problem of designing a low-thrust transfer between two bodies can be reduced to solving the corresponding spiral Lambert’s problem. In order to show the versatility of the method it is applied to the design of an asteroid tour and to explore launch opportunities to Mars.\

Roa, Javier↗
NASA NTRS1973

A real-time digital program for estimating aircraft stability and control parameters from flight test data by using the maximum likelihood method

A computer program (Langley program C1123) has been developed for estimating aircraft stability and control parameters from flight test data. These parameters are estimated by the maximum likelihood estimation procedure implemented on a real-time digital simulation system, which uses the Control Data 6600 computer. This system allows the investigator to interact with the program in order to obtain satisfactory results. Part of this system, the control and display capabilities, is described for this program. This report also describes the computer program by presenting the program variables, subroutines, flow charts, listings, and operational features. Program usage is demonstrated with a test case using pseudo or simulated flight data.

Grove, R. D.↗
NASA NTRS1984

Some current uses of array processors for preprocessing of remote sensing data

The preparation of remotely sensed data sets into a form useful to the analyst is a significant computational task, involving the processing of spacecraft data (e.g., orbit, attitude, temperatures, etc.), decommutation of the video telemetry stream, radiometric correction and geometric correction. Many of these processes are extremely well suited for implementation on attached array processors. Currently, at Goddard Space Flight Center a number of computer systems provide such capability for earth observations or are under development as test beds for future ground segment support. Six such systems will be discussed.

Fischel, D.↗
NASA NTRS1989

Computing viscous reactive flow over blunt winged vehicles

A hypersonic flow simulation methodology is developed for analyzing thermochemical nonequilibrium and viscous phenomena associated with space-flight vehicles at realistic conditions. The computer code consists of grid generation, Navier-Stokes and species models, and equation solvers for a complete configuration at arbitrary angles of attack. Provisions are implemented in the code to consider chemically frozen or equilibrium chemistry, inviscid model, conic configurations and simplifications of physical parameters for verifying solution consistency and accuracy. Implications of physical modeling and input parameters on a blunt-cone flow are investigated in details. Applications to USA Orbiter-like vehicles have emphasized the leeside canopy flow as well as the bow-wing shock interaction problem at Mach 22 and 40 deg angle of attack. Comparison of windward centerline pressures and heating rates with available wind-tunnel and flight data is in progress.

Li, C. P.↗
NASA NTRS2020

Julia Programming Language Benchmark Using a Flight Simulation

Julia is a relatively new computer language that aims to reduce the challenge for mathmodelers to develop fast computer tools and simulations. It potentially combines the ease-of-coding feature of scripting languages (like Python) with the performance of compiled languages (like C++). A key question for Julia application to the simulation domain is, “Can Julia, with its obvious coding simplicity, provide runtime speeds comparable to conventional compiled languages for flight simulation?” A unique combination of existing elements can be employed to address the previous question: Extensively documented object-oriented simulation architecture, Industry standard rocket flight simulation, Separate versions (C++, Java, and Python) already benchmarked.

Sells, Ray↗
NASA NTRS1988

In-flight radiometric calibration of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

A reflectance-based method was used to provide an analysis of the in-flight radiometric performance of AVIRIS. Field spectral reflectance measurements of the surface and extinction measurements of the atmosphere using solar radiation were used as input to atmospheric radiative transfer calculations. Five separate codes were used in the analysis. Four include multiple scattering, and the computed radiances from these for flight conditions were in good agreement. Code-generated radiances were compared with AVIRIS-predicted radiances based on two laboratory calibrations (pre- and post-season of flight) for a uniform highly reflecting natural dry lake target. For one spectrometer (C), the pre- and post-season calibration factors were found to give identical results, and to be in agreement with the atmospheric models that include multiple scattering. This positive result validates the field and laboratory calibration technique. Results for the other spectrometers (A, B and D) were widely at variance with the models no matter which calibration factors were used. Potential causes of these discrepancies are discussed.

Conel, James E.↗
NASA NTRS1988

In-flight radiometric calibration of the airborne visible/infrared imaging spectrometer (AVIRIS)

A reflectance-based method was used to provide an analysis of the in-flight radiometric performance of AVIRIS. Field spectral reflectance measurements of the surface and extinction measurements of the atmosphere using solar radiation were used as input to atmospheric radiative transfer calculations. Five separate codes were used in the analysis. Four include multiple scattering, and the computed radiances from these for flight conditions were in good agreement. Code-generated radiances were compared with AVIRIS-predicted radiances based on two laboratory calibrations for a uniform highly reflecting natural dry lake target. For one spectrometer, the pre- and post-season calibration factors were found to give identical results, and to be in agreement with the atmospheric models that include multiple scattering. Results for the other spectrometers were widely at variance with the models no matter which calibration factors were used. Potential causes of these discrepancies are discussed.

Conel, James E.↗
NASA NTRS1975

Ride-quality testing under controlled flight conditions

As part of a NASA program to develop the technology of ride quality, a flight-test program has been conducted to obtain subjective reactions of a significant number of test passengers to a variety of controlled and repeatable flight conditions. For these experiments, the computer of a variable-stability research aircraft was programmed to precisely control the aircraft's in-flight motions as specified by motion command signals prerecorded on magnetic tape. Problems initially encountered derived primarily from the quality of the motion command signals and tape playback device, plus the aircraft motion response in degrees of freedom other than that desired. Problem solutions were obtained through the use of filtering and compensating networks. The variable-stability-system modifications, problems encountered, and their solutions are described. The test procedure is described and sample results are presented which illustrate the usefulness of this technique for ride-quality research.

Schoonover, W. E., Jr.↗
NASA NTRS1986

Anthropometric considerations for a 4-axis side-arm flight controller

A data base on multiaxis side-arm flight controls was generated. The rapid advances in fly-by-light technology, automatic stability systems, and onboard computers have combined to create flexible flight control systems which could reduce the workload imposed on the operator by complex new equipment. This side-arm flight controller combines four controls into one unit and should simplify the pilot's task. However, the use of a multiaxis side-arm flight controller without complete cockpit integration may tend to increase the pilot's workload.

Debellis, W. B.↗
NASA NTRS2003

Multibody Parachute Flight Simulations for Planetary Entry Trajectories Using "Equilibrium Points"

A method has been developed to reduce numerical stiffness and computer CPU requirements of high fidelity multibody flight simulations involving parachutes for planetary entry trajectories. Typical parachute entry configurations consist of entry bodies suspended from a parachute, connected by flexible lines. To accurately calculate line forces and moments, the simulations need to keep track of the point where the flexible lines meet (confluence point). In previous multibody parachute flight simulations, the confluence point has been modeled as a point mass. Using a point mass for the confluence point tends to make the simulation numerically stiff, because its mass is typically much less that than the main rigid body masses. One solution for stiff differential equations is to use a very small integration time step. However, this results in large computer CPU requirements. In the method described in the paper, the need for using a mass as the confluence point has been eliminated. Instead, the confluence point is modeled using an "equilibrium point". This point is calculated at every integration step as the point at which sum of all line forces is zero (static equilibrium). The use of this "equilibrium point" has the advantage of both reducing the numerical stiffness of the simulations, and eliminating the dynamical equations associated with vibration of a lumped mass on a high-tension string.

Raiszadeh, Ben↗
NASA NTRS1963

Tiros IV Radiation Data Catalog and Users' Manual

The TIROS IV Meteorological Satellite contains a medium resolution scanning radiometer. Two of the channels of this instrument are sensitive to reflected solar radiation and the remaining two respond to emitted thermal radiation from the earth and its atmosphere. The two thermal channels are calibrated in terms of equivalent blackbody temperatures, and the reflected solar radiation channels in terms of effective radiant emittances. The calibration data, along with orbital and attitude data and the radiation data from the satellite, were incorporated in a computer program for an IBM 7090 which was used to produce, in binary form, the "Final Meteorological Radiation Tape" which is the basic repository of all radiation data. After launch, the radiometer displaye d the same degradation of response characteristics as did its predecessors in TIROS II and TIROS III. The onset of degradation results in a departure of the data from the prelaunch laboratory calibration. The cause of degradation has not been determined, and the matter is still being studied at the Goddard Space Flight Center. Before work with the TIROS IV radiation data is attempted, an understanding of the radiometer, its calibration, and the problems encountered in the experiment, especially from response degradation, is essential. The instrumentation design, development work, and the calibrations herein described were performed by the Goddard Space Flight Center Staff, whereas the computer and programming efforts were carried out jointly by the staffs of the National Weather Satellite Center, U. S. Weather Bureau, and the Goddard Space Flight Center. In this Catalog-Manual, the radiometer an d its calibration, data processing, the "Final Meteorological Radiation Tape", the observed degradation patterns, and possible corrections for degradation are discussed. The Catalog-Manual also includes, in two forms, documentation of each orbit of successfully reduced radiation data acquired by TIROS IV. One method of presentation is the Index of Final Meteorological Radiation Tapes and the other is a Subpoint Track, Summary of Available Radiation Data in diagrammatic form.

TIROS IV SATELLITE↗
NASA NTRS2021

Derivation of the final OSIRIS-REx OVIRS in-flight radiometric calibration

The OSIRIS-REx Visible and InfraRed Spectrometer (OVIRS) operates over the ∼0.4- to 4.3-μm wavelength range. Radiometric calibration over this broad range requires the use of multiple calibration sources. Initial OVIRS in-flight calibration coefficients were previously computed using ground calibration from visible integrating sphere and IR blackbody sources, cross-calibrated with Earth-observing satellites for visible wavelengths, and adjusted using the spectrum of the OSIRIS-REx mission’s target body, asteroid (101955) Bennu. As part of the final in-flight calibration, we determined that the best calibration method removes out-of-band IR signal leakage prior to radiometric calibration and updated the calibration coefficients accordingly. These final calibration coefficients work well for data where the field of view is filled, and we document the possible artifacts in underfilled spots.

Amy A. Simon↗
NASA NTRS1995

Exhausted Plume Flow Field Prediction Near the Afterbody of Hypersonic Flight Vehicles in High Altitudes

A two-dimensional computer code to solve the Burnett equations has been developed which computes the flow interaction between an exhausted plume and hypersonic external flow near the afterbody of a flight vehicle. This Burnett-2D code extends the capability of Navier-Stokes solver (RPLUS2D code) to include high-order Burnett source terms and slip-wall conditions for velocity and temperature. Higher-order Burnett viscous stress and heat flux terms are discretized using central-differencing and treated as source terms. Blocking logic is adopted in order to overcome the difficulty of grid generation. The computation of exhaust plume flow field is divided into two steps. In the first step, the thruster nozzle exit conditions are computed which generates inflow conditions in the base area near the afterbody. Results demonstrated that at high altitudes, the computations of nozzle exit conditions must include the effects of base flow since significant expansion exists in the base region. In the second step, Burnett equations were solved for exhaust plume flow field near the afterbody. The free stream conditions are set at an altitude equal to 80km and the Mach number is equal to 5.0. The preliminary results show that the plume expansion, as altitude increases, will eventually cause upstream flow separation.

Chou, Lynn Chen↗
NASA NTRS2001

Integration of Libration Point Orbit Dynamics into a Universal 3-D Autonomous Formation Flying Algorithm

The autonomous formation flying control algorithm developed by the Goddard Space Flight Center (GSFC) for the New Millennium Program (NMP) Earth Observing-1 (EO-1) mission is investigated for applicability to libration point orbit formations. In the EO-1 formation-flying algorithm, control is accomplished via linearization about a reference transfer orbit with a state transition matrix (STM) computed from state inputs. The effect of libration point orbit dynamics on this algorithm architecture is explored via computation of STMs using the flight proven code, a monodromy matrix developed from a N-body model of a libration orbit, and a standard STM developed from the gravitational and coriolis effects as measured at the libration point. A comparison of formation flying Delta-Vs calculated from these methods is made to a standard linear quadratic regulator (LQR) method. The universal 3-D approach is optimal in the sense that it can be accommodated as an open-loop or closed-loop control using only state information.

Folta, David↗
NASA NTRS1989

Robotics program at the NASA Goddard Space Flight Center

The NASA Goddard telerobotic program is structured to increase the scope and efficiency of what man can accomplish in space through the use of robotics. The main focus is to service Space Station Freedom and its payloads, but robotic assembly of Space Station Freedom and platforms is also anticipated. The approach being taken to achieve this by telerobotics, where manipulators can be controlled by human operators or computer programs. The Goddard Space Flight Center (GSFC) has the responsability to develop the Flight Telerobotic Servicer (FTS) for Space Station Freedom. The current plan at GSFC in support of telerobotics for Space Station Freedom and the in-orbit servicing of platforms are reviewed. Plans for ground demonstrations involving the use of an engineering test bed and an operational facility are discussed.

Ollendorf, Stanford↗