Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environment variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Magnetic Navigation for GPS-Denied Airborne Applications

Most current flight systems are dependent on GPS for navigation. Recently, however, navigation in GPS-denied environments has become an area of intensive research. Additional navigation sensor data can be obtained from visual observations (stars or terrain), inertial measurement units, radar, measurements of the local magnetic field, or perhaps even gravity. Absolute and relative positioning via magnetic field measurements have been shown to be viable in many applications including ground navigation, low altitude aircraft flight, and spaceflight. There is greater variability in the magnetic field over shorter distances when flying at low altitude and in ground applications, leading to more accurate positioning. However, ground-based magnetic navigation is often heavily influenced by man-made structures, especially in urban environments. This is not the case for airborne magnetic navigation since the influence of buildings, roads, etc. is negligible for typical aircraft altitudes. For absolute magnetic navigation, the positioning accuracy decreases as altitude increases for a given vehicle velocity, but the observed time variability in the field can be reclaimed by traveling faster through the field. Thus, navigation accuracy becomes a balance of speed and altitude since the higher altitude can be counterbalanced by higher velocity. To understand these effects quantitatively, we explored various techniques to aid a simulated inertial measurement unit with magnetic information. Using a technique known as two-dimensional magnetic map matching, we simulated the performance of airborne magnetic navigation at fixed speed while varying the altitude, flight direction, magnetometer data collection time, reference magnetic map bias error, and type of trajectory (over land or over ocean).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Instrument canister thermal control

A transient thermal analysis and test of a thermal control canister is described. The 1 x 1 x 3 m canister provides a uniform thermal environment for shuttle instrument payloads requiring fine temperature control, the design goal being operation between 0 C and 20 C with a range of plus or minus 1 C at any selected set-point temperature. The canister side walls are isothermalized by a system of longitudinal and circumferential heat pipes rejecting heat through feedback controlled, variable conductance heat pipes to side mounted radiators. A breadboard model of two side walls and two radiators was tested in a thermal vacuum chamber. The breadboard was stable over a wide range of effective environments, experiment dissipations, and control point temperature levels.

Harwell, W.↗

Chemical characterization of biogenic secondary organic aerosol generated from plant emissions under baseline and stressed conditions: inter- and intra-species variability for six coniferous species

The largest global source of secondary organic aerosol (SOA) in the atmosphere is derived from the oxidation of biogenic emissions. Plant stressors associated with a changing environment can alter both the quantity and composition of the compounds that are emitted. Alterations to the biogenic volatile organic compound (BVOC) profile could impact the characteristics of the SOA formed from those emissions. This study investigated the impacts of one global change stressor, increased herbivory, on the composition of SOA derived from real plant emissions. Herbivory was simulated via application of methyl jasmonate (MeJA), a proxy compound. Experiments were repeated under pre- and post-treatment conditions for six different coniferous plant types. Volatile organic compounds (VOCs) emitted from the plants were oxidized to form SOA via dark ozone-initiated chemistry. The SOA chemical composition was measured using a Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-AMS). The aerosol mass spectra of pre-treatment biogenic SOA from all plant types tended to be similar with correlations usually greater than or equal to 0.90. The presence of a stressor produced characteristic differences in the SOA mass spectra. Specifically, the following m/z were identified as a possible biogenic stress AMS marker with the corresponding HR ion(s) shown in parentheses: m/z 31 (CH 3 O + ), m/z 58 (C 2 H 2 O 2 + , C 3 H 6 O + ), m/z 29 (C 2 H 5 + ), m/z 57 (C 3 H 5 O + ), m/z 59 (C 2 H 3 O 2 + , C 3 H 7 O + ), m/z 71 (C 3 H 3 O 2 + , C 4 H 7 O + ), and m/z 83 (C 5 H 7 O + ). The first aerosol mass spectrum of SOA generated from the oxidation of the plant stress hormone, MeJA, is also presented. Elemental analysis results demonstrated an O : C range of baseline biogenic SOA between 0.3 and 0.47. The O : C of standard MeJA SOA was 0.52. Results presented here could be used to help identify a biogenic plant stress marker in ambient data sets collected in forest environments.

54 ENVIRONMENTAL SCIENCES↗

The direction and spectral variability of a cosmic gamma-ray burst

Description of the simultaneous observations of a gamma-ray event by five different satellites on May 14, 1972 in widely differing geomagnetic environments. The direction of the source was unambiguously determined, and it is concluded that the event was real and not caused by some unexplained spurious or instrumental effects. Since the obtained direction is far from the earth and the sun, the conclusion is that this gamma-ray event was almost certainly of cosmic origin. The total energy at the earth in this event was about .0005 ergs/sq cm from 11 to 1500 keV.

Wheaton, W. A.↗

Luminous and Variable Stars in NGC 2403 and M81

We present the results of spectroscopy and multi-wavelength photometry of luminous and variable star candidates in the nearby spiral galaxies NGC 2403 and M81. We discuss specific classes of stars, the Luminous Blue Variables (LBVs), B[e] supergiants (sgB[e]), and the high-luminosity yellow hypergiants. We identify two new LBV candidates, and three sgB[e] stars in M81. We also find that some stars that were previously considered LBV candidates are actually field stars. The confirmed and candidate LBVs and sgB[e] stars together with the other confirmed members are shown on the HR Diagrams for their respective galaxies. We also present the HR Diagrams for the two “SN impostors”, V37 (SN2002kg) and V12(SN1954J) in NGC 2403 and the stars in their immediate environments.

79 ASTRONOMY AND ASTROPHYSICS↗

RAVIS: Resource Forecast and Ramp Visualization for Situational Awareness - An Introduction to the Open-Source Tool and Use Cases

The Resource Forecast and Ramp Visualization for Situational Awareness (RAVIS) is an open-source tool for visualizing variable renewable resource forecasts and ramp alerts for significant up/down ramps in renewable resource and the consequent net-load. The modular dashboard of RAVIS contains configurable panes for viewing- probabilistic time series forecasts, ramp event alerts on the look-ahead timeline, spatially resolved resource sites and forecasts, and system simulation and market clearing data such as transmission lines utilization, nodal prices and available generation flexibility. RAVIS uses a technology suite that is assembled to provide optimum visualization facility while maintaining a wide pool of potential deployment and client environments. The tool is designed to take advantage of web application technologies, open source visualization libraries and tooling. Utilizing this technology will enable deployment in any environment, using any operating system, and is scalable to much higher spatial and temporal scales of visualization. As a prototype of the tool and demonstrating a use case of variable renewable integration, RAVIS currently integrates site-specific solar power forecasts in the California Independent System Operator (CAISO) and Mid-continent ISO (MISO) footprint from the IBM WattSun forecasting platform, and also superimposes market simulation data for CAISO footprint from as in-house NREL market clearing tool. The tool has the ability to alert the viewer for excessive up or down ramps for both individual solar sites as well as regionally aggregated net-load ramps, and alerts can also be qualified with respect to available flexible generation. This report will provide an introduction to the RAVIS tool, and summarize the above mentioned capabilities, typical use cases and possible extensions of the tool. The RAVIS development team believes there are likely to be high economic and reliability benefits of integrating probabilistic forecasts of variable renewables into control center visualizations and improved ramp events situational awareness for system operators and forecasting teams in the ISOs and electric utilities in comparison with their business as usual practices.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

V2492 Cygni: THE EARLY EVOLUTION OF THE 2010 OUTBURST

We present Gemini-North optical and near-IR observations of a young eruptive star in Cygnus, designated as V2492 Cygni in the General Catalog of Variable Stars. This object is one of two young stars, located within 2 deg of each other, that recently brightened by around 5 mag and were reported as possible new FU Orionis-type variables. The outburst spectrum of V2492 Cygni shows atomic emission features throughout the optical and near-infrared. In the optical, H{alpha} is in emission and has an associated blueshifted absorption component. The far-red Ca II triplet lines are also in emission and, as with H{alpha}, possess significant blueshifted absorption. The optical TiO molecular bands are also in emission. In the near-infrared, Pa{beta}, Br{gamma}, and the CO overtone bandheads are strongly in emission. Such spectral characteristics are very similar to those exhibited by both EX Lupi, the progenitor of the EXor class of eruptive variables, during its 2008 extreme outburst, and V1647 Ori during its elevated phase in 2003. Additionally, we consider archival data on V2492 Cygni and investigate the pre-outburst nature of this young star. We construct a quiescent-phase spectral energy distribution which, via model fitting, gives insight into the circumstellar environment of the object prior to the current eruption. Our investigation strongly suggests that the V2492 Cygni outburst appears to be more consistent with an EXor event, a fact supported by its recent 2 mag fading and stochastic variability.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Examination of Additively Manufactured Patterns on Structural Nuclear Materials for Digital Image Correlation Strain Measurements

Abstract Background There are a limited number of commercially available sensors for monitoring the deformation of materials in-situ during harsh environment applications, such as those found in the nuclear and aerospace industries. Such sensing devices, including weldable strain gauges, extensometers, and linear variable differential transformers, can be destructive to material surfaces being investigated and typically require relatively large surface areas to attach (> 10 mm in length). Digital image correlation (DIC) is a viable, non-contact alternative to in-situ strain deformation. However, it often requires implementing artificial patterns using splattering techniques, which are difficult to reproduce. Objective Additive manufacturing capabilities offer consistent patterns using programmable fabrication methods. Methods In this work, a variety of small-scale periodic patterns with different geometries were printed directly on structural nuclear materials (i.e., stainless steel and aluminum tensile specimens) using an aerosol jet printer (AJP). Unlike other additive manufacturing techniques, AJP offers the advantage of materials selection. DIC was used to track and correlate strain to alternative measurement methods during cyclic loading, and tensile tests (up to 1100 µɛ) at room temperature. Results The results confirmed AJP has better control of pattern parameters for small fields of view and facilitate the ability of DIC algorithms to adequately process patterns with periodicity. More specifically, the printed 100 μm spaced dot and 150 μm spaced line patterns provided accurate measurements with a maximum error of less than 2% and 4% on aluminum samples when compared to an extensometer and commercially available strain gauges. Conclusion Our results highlight a new pattern fabrication technique that is form factor friendly for digital image correlation in nuclear applications.

Novich, K. A. (ORCID:0000000204466022)↗

U.S. DOE NETL methodology for estimating the prospective CO 2 storage resource of shales at the national and regional scale

While the majority of shale formations will serve as reservoir seals for stored anthropogenic carbon dioxide (CO2), hydrocarbon-bearing shale formations may be potential geologic sinks after depletion through primary production. Here in this paper we present the United States-Department of Energy-National Energy Technology Laboratory (US-DOE-NETL) methodology for screening-level assessment of prospective CO 2 storage resources in shale using a volumetric equation. Volumetric resource estimates are produced from the bulk volume, porosity, and sorptivity of the shale and storage efficiency factors based on formation-scale properties and petrophysical limitations on fluid transport. Prospective shale formations require: (1) prior hydrocarbon production using horizontal drilling and stimulation via staged, high-volume hydraulic fracturing, (2) depths sufficient to maintain CO 2 in a supercritical state, generally >800 m, and (3) an overlying seal. The US-DOE-NETL methodology accounts for storage of CO 2 in shale as a free fluid phase within fractures and matrix pores and as an sorbed phase on organic matter and clays. Uncertainties include but are not limited to poorly-constrained geologic variability in formation thickness, porosity, existing fluid content, organic richness, and mineralogy. Knowledge of how these parameters may be linked to depositional environments, facies, and diagenetic history of the shale will improve the understanding of pore-to-reservoir scale behavior, and provide improved estimates of prospective CO 2 storage.

25 ENERGY STORAGE↗

Mechanochemical synthesis of layered hydroxy salts

Highlights: ► Ultrafast synthesis method was developed for the synthesis of layered hydroxy salts. ► Preparation of hydroxy single salt by this method requires only one minute. ► Hydroxy salts with variable Ni/Zn ratio could be synthesized by varying the metal contents of the starting mixture. ► This synthesis method is solvent free and environment friendly. -- Abstract: A simple one minute synthesis method was adapted for the preparation of layered hydroxy salts of copper, zinc, nickel and cadmium by grinding the metal salts with sodium hydroxide in a mortar. This solvent free method is environment friendly and fast. This method could be extended to the preparation of Ni/Zn hydroxy double salts. The Ni/Zn ratio could be varied from 1.2 to 1.9 by varying the metal contents of the precursor salts without the formation of any impurities in the sample. The prepared compounds had similar characteristics as that of the samples prepared by precipitation route. No sign of carbonate contamination was observed in any of the prepared samples.

36 MATERIALS SCIENCE↗

The Next Generation of Scenarios for Climate Change Research and Assessment

Advances in the science and observation of climate change are providing a clearer understanding of the inherent variability of Earth’s climate system and its likely response to human and natural influences. The implications of climate change for the environment and society will depend not only on the response of the Earth system to changes in radiative forcings, but also on how humankind responds through changes in technology, economies, lifestyle, and policy. Extensive uncertainties exist in future forcings of and responses to climate change, necessitating the use of scenarios of the future to explore the potential consequences of different response options. To date, these scenarios have not adequately examined crucial possibilities, such as climate mitigation and adaptation, and have relied on processes that limited the exchange of information among physical, biological, and social scientists. Now, an interdisciplinary research team has developed a new process for creating plausible scenarios to investigate some of the most challenging and important questions about climate change confronting the international community.

54 ENVIRONMENTAL SCIENCES↗

Validation of Microgrid Algorithms using At-Scale Simulation and Emulation Real-Time (ASSERT) Framework

This paper presents a novel framework for validating microgrid algorithms using a At-Scale Simulation and Emulation Real-Time (ASSERT) setup. The proposed universal microgrid validation framework was developed at Advanced Research on Integrated Energy Systems (ARIES) platform at National Renewable Energy Laboratory in Golden, Colorado, USA. As the number of intercommunicating devices grow in power systems, along with more integration of inverter-based resources, developing and validating microgrid operation and control algorithms is becoming complex and time-consuming task. The ASSERT framework is designed to provide a comprehensive, accurate, and efficient solution for validating microgrid algorithms. It combines at-scale simulations and real-time emulation to create a virtual environment that closely mimics the behavior of a physical microgrids which are characteristic of future smart distribution systems, such as: (1) increasing variability in the physical size of new energy technologies; (2) requiring control large numbers of interconnected devices, and (3) integrating diverse technologies that have not previously worked together. The paper describes the technical details of the ASSERT framework, its validation process, and its benefits over traditional validation methods. The framework's ability to validate the performance of various algorithms is demonstrated through a case study, which shows that it can effectively identify the weaknesses of an algorithm and optimize its performance. Overall, the ASSERT framework is a promising tool that can significantly enhance the development and validation of microgrid algorithms, leading to more reliable and efficient microgrid operation.

at-scale↗

Supervised learning-based tagSNP selection for genome-wide disease classifications

Comprehensive evaluation of common genetic variations through association of single nucleotide polymorphisms (SNPs) with complex human diseases on the genome-wide scale is an active area in human genome research. One of the fundamental questions in a SNP-disease association study is to find an optimal subset of SNPs with predicting power for disease status. To find that subset while reducing study burden in terms of time and costs, one can potentially reconcile information redundancy from associations between SNP markers. We have developed a feature selection method named Supervised Recursive Feature Addition (SRFA). This method combines supervised learning and statistical measures for the chosen candidate features/SNPs to reconcile the redundancy information and, in doing so, improve the classification performance in association studies. Additionally, we have proposed a Support Vector based Recursive Feature Addition (SVRFA) scheme in SNP-disease association analysis. We have proposed using SRFA with different statistical learning classifiers and SVRFA for both SNP selection and disease classification and then applying them to two complex disease data sets. In general, our approaches outperform the well-known feature selection method of Support Vector Machine Recursive Feature Elimination and logic regression-based SNP selection for disease classification in genetic association studies. Our study further indicates that both genetic and environmental variables should be taken into account when doing disease predictions and classifications for the most complex human diseases that have gene-environment interactions.

59 BASIC BIOLOGICAL SCIENCES↗

Comparison between the Strength Levels of Baseline Nuclear-Grade Graphite and Graphite Irradiated in AGC-2

This report details the initial comparison of mechanical strength properties between the cylindrical nuclear-grade graphite specimens irradiated in the second Advanced Graphite Creep (AGC-2) experiment with the established baseline, or unirradiated, mechanical properties compiled in the Baseline Graphite Characterization program. The overall comparative analysis will describe the development of an appropriate test protocol for irradiated specimens, the execution of the mechanical tests on the AGC-2 sample population, and will further discuss the data in terms of developing an accurate irradiated property distribution in the limited amount of irradiated data by leveraging the considerably larger property datasets being captured in the Baseline Graphite Characterization program. Integrating information on the inherent variability in nuclear-grade graphite with more complete datasets is one of the goals of the VHTR Graphite Materials program. Between “sister” specimens, or specimens with the same geometry machined from the same sub-block of graphite from which the irradiated AGC specimens were extracted, and the Baseline datasets, a comprehensive body of data will exist that can provide both a direct and indirect indication of the full irradiated property distributions that can be expected of irradiated nuclear-grade graphite while in service in a VHTR system. While the most critical data will remain the actual irradiated property measurements, expansion of this data into accurate distributions based on the inherent variability in graphite properties will be a crucial step in qualifying graphite for nuclear use as a structural material in a VHTR environment.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Hierarchical Multi-scale Modeling of Laser Weld Failure: An Initial Investigation

The failure of 304L laser welds is of interest to system and component designers due to nuclear safety requirements for abnormal environments. Accurately modeling laser weld behavior in full system and component models has proven especially challenging due to three factors: the large variability observed in laser weld characterization tests; the difficulty in isolating the weld material for material characterization and modeling the weld material behavior; and the disparate scales associated with modeling laser welds in large systems. Recent work has shown that meso-scale geometric features of laser welds such as pores and weld root tortuosity are critical to accurately predicting the structural performance of welds. The challenge with modeling these welds is that the geometric features driving their structural performance are generally on the order of ten to hundreds of microns, but can affect the responses of interest in systems and components on the order of centimeters to meters.

36 MATERIALS SCIENCE↗

Accuracy and performance of LACIE crop development models

Of the three principal phenological crop calendar models evaluated for LACIE, Robertson's triquadratic model which predicts the rate of progression of wheat through its biological development, was selected. Daily maximum and minimum temperatures and day length are the input variables, and the principal output is a daily increment of development through six physiological growth stages. Because wheat corresponds differently to the environment during each growth stage, five different equations are required. The estimated and observed crop development data were compared in order to establish a measure of confidence in the model and to identify consistent discrepancies that would adversely affect LACIE operation. Although the model provided reliable estimates for various wheat growing regions of the world, it was found that there are still areas in need of further model improvement or development.

Woolley, S. K.↗

Diffuser/ejector system for a very high vacuum environment

Turbo jet engines are used to furnish the necessary high temperature, high volume, medium pressure gas to provide a high vacuum test environment at comparatively low cost for space engines at sea level. Moreover, the invention provides a unique way by use of the variable area ratio ejectors with a pair of meshing cones are used. The outer cone is arranged to translate fore and aft, and the inner cone is interchangeable with other cones having varying angles of taper.

Riggs, K. E.↗

Planning for VRM: Radar and sonar studies of volcanic terrains on Earth, Venus and Mars

Venera 15 and 16 radar images of Venus, together with Earth based data from the Arecibo Observatory, indicate that volcanism has played an important role in the evolution of the Venusian landscape. At the end of this decade, NASA's Venus Radar Mapper (VRM) spacecraft will return near global information that will further constrain the planet's geologic history. Due to the diversity of volcano/tectonic features that have already been identified on Venus, and the intrinsic differences between radar images and conventional photography, additional expertise is being developed with which to interpret the VRM images of this unusual environment. Several attempts to better understand the physical characteristics of volcanic terrains are described here. Pioneer Venus radar altimeter measurements of topographic variability and surface roughness are compared with Goldstone radar measurements of volcanic terrains on Mars. Synthetic aperture radar images obtained by the SIR-B Space Shuttle experiment over Kilauea Volcano, Hawaii, are employed to investigate the differences in radar returns from pahoehoe, aa and sheet lava flows. Four polarization, multiple incidence angle, aircraft radar images of the Medicine Lake area of N. California are used to address the unusually high cross-polarization ratio of lobate flows around Beta Regio on Venus, as measured by the Arecibo radar.

Mouginis-Mark, P. J.↗