Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Rainbow Scattering of Inert Gas Atoms on Aluminum and Silver Crystal Surfaces

Particle trajectories are calculated to study the rainbow scattering and the focusing of Ar atoms on the Al(111) and Ag(111) crystal surfaces and Ne, Ar, and Kr atoms on the Al(001) crystal surface. The rainbow-scattering-induced features in spectra are used to determine the thermal vibration amplitudes of atoms for the Al(111) and Ag(111) targets. These data agree with the data of independent measurements. The dependence of the position of a rainbow peak on the initial energy of atoms is used to find the atom–surface interaction potentials in the energy range of 0.3–70 eV for the case Ar–Ag and 3–45 eV for other cases. The values and the functional dependences of the potentials on the internuclear distance differ strongly from the well-known pair potential models. This difference is associated with the interaction of a projectile atom with the conduction electrons in a metal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonance Coulomb scattering at shallow donors in AlGaAs/n-GaAs/AlGaAs quantum wells

The characteristics of the Coulomb scattering of conduction electrons at shallow donor centers in Al{sub x}Ga{sub 1-x}As/n-GaAs/Al{sub x}Ga{sub 1-x}As quantum well heterostructures are studied theoretically with consideration for the influence of resonance states. The resonance states emerge below the excited quantum-confinement subbands because of the presence of donors. It is found that the spectra of total and transport Coulomb-scattering cross sections exhibit asymmetric resonance features in the vicinity of resonance energies. It is shown that these features do not exhibit a small effect: in the vicinity of resonance energies, the cross sections can differ from the corresponding quantities in the nonresonance case several times.

36 MATERIALS SCIENCE↗

Study of the electronic properties of hydrogenated amorphous silicon films by femtosecond spectroscopy

Experimental results on the electron relaxation time and diffusion coefficient in hydrogenated amorphous silicon films that exhibit intrinsic and electronic conductivity at room temperature are reported. It is found that, for these two types of films, the relaxation times are 1 ns and 465 ps and the diffusion coefficients are 0.54 and 0.83 cm{sup 2} s{sup -1}. It is established that, as the pulse intensity is increased, the decay time of the induced-grating signal shortens.

36 MATERIALS SCIENCE↗

Electrostatic Nature of Size Dependences of Adsorption Properties of Ytterbium Nanofilms Grown on the Surface of Silicon: the CO–Yb–Si(111) System

The adsorption of CO molecules onto ytterbium nanofilms with their thickness varying from 1 to 16 monolayers is studied. The dependences of the number of adsorbed CO molecules (adsorption isotherms) and the work function of ytterbium films on the dose of carbon monoxide are examined. It is demonstrated that both the number of adsorbed molecules and the work function depend (under equal conditions) on the nanofilm thickness; in other words, a size effect is revealed. It is found that this size effect is induced by the electrostatic interaction between the conduction electrons of ytterbium and the electrons localized on the nanofilm surface, which establish bonding between the surface and CO molecules. This interaction depends on the film thickness and limits the number of CO molecules that may be adsorbed onto the surface of a film with a given thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Spin Pumping Effect in a Ferromagnetic Insulator/Normal Metal System: A Simple Quantum Mechanical Model

A simple quantum mechanical model of the spin pumping effect upon the excitation of a ferromagnetic resonance in a magnetic dielectric having a flat interface with a nonmagnetic metal is constructed. The model is based on the solution of the Schrödinger equation for conduction electrons in metal. It is shown that the reflection of electrons from the insulator with an oscillating magnetization with a spin flip gives rise to both a direct and alternating (oscillating with the frequency of the resonance-exciting microwave field) spin fluxes from the ferromagnet to the insulator. In this case, the effect of direct current is small compared to the effect of the alternating current; the role of a small parameter is played by the ratio of the exchange constant of a ferromagnet to the potential barrier between the metal and the dielectric (which is higher than the Fermi energy). The result obtained is consistent with known experimental data. The model constructed provides a simple and clear picture of the origination of the phenomenon and enable one to analyze the dependence of the effect on the system parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of Plasma Oscillations in Metals Using Total External Reflection of X-Rays

A method to determine plasma oscillations in metals with the aid of total external reflection (TER) of X-rays is proposed. It is shown that the plasmon energy, concentration of conduction electrons, and Fermi energies can be calculated using experimentally measured grazing angles of X-rays after TER. Such characteristics depend on crystallographic directions and may depend on the TER depth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE OXYGEN PERMEATION PROPERTIES OF NANO CRYSTALLINE CEO2 THIN FILMS

The measurement of oxygen flux across nanocrystalline CeO{sub 2} cerium oxide thin films at intermediate temperature (650 to 800 C) is presented. Porous ceria support substrates were fabricated by sintering with carbon additions. The final dense film was deposited from an optimized sol-gel solution resulting in a mean grain size of 50 nm which displayed oxygen flux values of up to 0.014 {micro}mol/cm{sup 2}s over the oxygen partial pressure range from air to helium gas used in the measurement at 800 C. The oxygen flux characteristics confirm mixed ionic and electronic conductivity in nanocrystalline ceria films and demonstrate the role of size dependent materials properties as a design parameter in functional membranes for oxygen separation.

36 MATERIALS SCIENCE↗

Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature

In recent years, developments in tomography tools have provided unprecedented insight into the microstructure of electrodes for solid oxide fuel cells, enabling researchers to establish direct links between electrode microstructure and electrochemical performance. Here we present results of high resolution, synchrotron X-ray nano computed tomography experiments, which have enabled microstructural characterisation of a mixed ionic electronic conducting lanthanum strontium cobalt iron oxide (LSCF) cathode with sub-50nm resolution at operating temperature. Using the uniquely non-destructive nano-CT platform, it is possible to characterise microstructural evolution processes associated with heating and operation in-situ.

30 DIRECT ENERGY CONVERSION↗

Characterizing Performance of Electrocatalyst Nanoparticles Infiltrated into Ni-YSZ Cermet Anodes for Solid Oxide Fuel Cells

The infiltration of nanoparticle electrocatalysts into solid oxide fuel cell (SOFC) electrodes has been proven to produce a high density of electrochemically active sites, and reduce charge transfer polarization losses for SOFC electrodes. This is crucial for intermediate temperature operation, as these losses increase greatly at lower temperatures. Nickel-yttria stabilized zirconia (NiYSZ) cermets are low-cost, and exhibit excellent stability, but their main disadvantage stems from nickel coarsening and performance loss over their operational lifetimes. Infiltration of electrocatalyst nanoparticles has been shown to mitigate nickel coarsening and the consequent anode degradation. In this study, the effects of these infiltrants are observed in a standard Ni-YSZ electrode. In addition to nickel, mixed ionic and electronic conducting (MIEC) phases were infiltrated into Ni-YSZ scaffolds and their performances were characterized using electrochemical impedance spectroscopy (EIS). Cross-sectional microscopy of fractured cells was used to compare electrode microstructure and particle statistics. A model is proposed for how the nanoparticle electrocatalysts improve the anode performance.

25 ENERGY STORAGE↗

Lithiation of Sulfur-Graphene Compounds Using Reactive Force-Field Molecular Dynamics Simulations

We performed molecular dynamics simulations of lithium-sulfur-graphene compounds using reactive force fields, providing a time scale to observe atomistic features relevant to the microscopic behavior of the of the bulk of sulfur-based cathodes to be used beyond our present Li-ion batteries. The samples we used were set to realistic geometries through sophisticated protocols to simulate ultrafast reactions that occur within the picosecond range, thus allowing us to get some insights into the characteristics of the bulk material in working cathodes of Li–S batteries, which are mixed with carbon to increase the poor electronic conductivity of S. We report chemical speciation and geometrical data at atomistic levels. We observed that slowly lithiated cathodes were more stable and with higher density than those that were suddenly fully-lithiated. We did not observe molecular Li 2 S formation; however, we observed an amorphous solid arrangement with the same stoichiometry of Li and S, with S–Li–S angles of ~111° and smaller ones due to the interaction between polysulfides that did not reacted totally. In addition, graphene keeps its planar shape; however, S8 changes its shape from rings to chains. Lithiated structures are more stable with lower energies, and more close-packed structures than structures with Li already inserted.

25 ENERGY STORAGE↗

Thermodynamic Origin of Reaction Non-Uniformity in Battery Porous Electrodes and Its Mitigation

The development of non-uniform reaction current distribution within porous electrodes is a ubiquitous phenomenon during battery charging/discharging and frequently controls the rate performance of battery cells. Reaction inhomogeneity in porous electrodes is usually attributed to the kinetic limitation of mass transport within the electrolyte and/or solid electrode phase. In this work, however, we reveal that it is also strongly influenced by the intrinsic thermodynamic behavior of electrode materials, specifically the dependence of the equilibrium potential on the state of charge: the electrode reaction becomes increasingly non-uniform when the slope of the equilibrium potential curve is reduced. We employ numerical simulations and equivalent circuit model to elucidate such a correlation and show that the degree of reaction inhomogeneity and the resultant discharge capacity can be predicted by a dimensionless reaction uniformity number. For electrode materials that have equilibrium potentials insensitive to the state of charge and exhibit significant reaction non-uniformity, we demonstrate several approaches to spatially homogenizing the reaction current inside porous electrodes, including matching the electronic and ionic resistances, introducing graded electronic conductivity and reducing the surface reaction kinetics.

25 ENERGY STORAGE↗

An Investigation of the Electrochemical Activity of (Ba/Sr)FeO 3-y Anodes

FeO x , SrFeO 3-y (SF), and Ba 0.5 Sr 0.5 FeO 3–y (BSF) were studied for application as fuel oxidation catalysts in solid oxide fuel cells (SOFC) anodes. Electrodes were prepared by impregnation into porous yttria-stabilized zirconia (YSZ), with La 0.3 Sr 0.7 TiO 3–y (LST) added for electronic conductivity. The electrode impedances decreased dramatically upon addition of SF and BSF and much less when only SrO or FeO x were added. Temperature Programmed Desorption (TPD) of O 2 from oxidized BSF showed O 2 desorbing between 200 °C and 700 °C, while no O 2 desorbed from Fe 2 O 3 below 900 °C. The results, together with thermodynamic analysis, suggest that stabilization of Fe +4 in the perovskite lattice plays an important role in enhancing the catalytic activity of SF and BSF by providing access to a Fe 3+ /Fe 4+ redox couple that can accept oxygen anions from the yttria-stabilized zirconia (YSZ) electrolyte. Oxygen is weakly bound to these sites facilitating its reaction with adsorbed H 2 .

Electrochemistry↗

Electrochemical Charge Transfer Reaction Kinetics at the Silicon-Liquid Electrolyte Interface

Since the gravimetric lithiation capacity of silicon is roughly ten times that of graphite, while their mass densities are comparable, for the same particle size the current density required to cycle a silicon electrode at a given C-rate is about ten times greater than that of graphite. Depending on the magnitude of the corresponding Butler-Volmer exchange current density, j o , such high current densities may cause the charge transfer kinetics at the silicon-electrolyte interface to become rate limiting. Previously reported values of j o for Si differ by about 10 orders of magnitude. Here we report j o measurements using electrochemical impedance spectroscopy (EIS) for single crystal electronically conductive silicon wafers with well-defined (100) and (111) orientations and active surface areas. The electrochemical cycling regime was designed to avoid artifacts due to stress-induced surface cracking of Si upon lithiation. The exchange current density of the silicon-electrolyte interface is found to be 0.1 ± 0.01 mA/cm 2 when using electrolyte consisting of 1 M LiPF 6 in EC/DMC (1/1 by wt) + FEC (10 wt%) + VC (2 wt%). Furthermore, these results are then used to illustrate the dependence of kinetic overpotential on particle size and C-rate for silicon compared to lower volumetric capacity compounds such as graphite.

25 ENERGY STORAGE↗

Surface Modified Pinecone Shaped Hierarchical Structure Fluorinated Mesocarbon Microbeads for Ultrafast Discharge and Improved Electrochemical Performances

Among all primary lithium batteries, Li/CF x primary battery possesses the highest energy density of 2180 Wh kg -1 . However, a key limitation is its poor rate capability because the cathode material CF x is intrinsically a poor electronic conductor. Here, we developed a so-called “doing subtraction” method to modify the pinecone shaped fluorinated mesocarbon microbead (F-MCMB). The modified fluorinated mesocarbon microbead (MF-MCMB), manifests the advantage of open-framed structure, possesses good electronic conductivity and removes transport barrier for lithium ions. Thus, high capacity performance and excellent rate capability without compromising capacity can be obtained. A capacity of 343 mAhg -1 and a maximum power density of 54600 W kg -1 are realized at an ultrafast rate of 40 C (28A g -1 ). Additionally, the MF-MCMB cathode does not show any voltage delay even at 5C during the discharge, which is a remarkable improvement over the state-of-the-art CF x materials.

25 ENERGY STORAGE↗

Electrochemical Performance of NaFeFe(CN) 6 Prepared by Solid Reaction for Sodium Ion Batteries

Commercially available Na 4 Fe(CN) 6 and Fe 4 [Fe(CN) 6 ] 3 are two cheap compounds that have ever been investigated as positive electrode materials for sodium-ion batteries. However, poor electronic conductivity of Na 4 Fe(CN) 6 and sodium deficiency of Fe 4 [Fe(CN) 6 ] 3 prevent these two materials from being used in practical rechargeable sodium-ion batteries. In this paper, a NaFeFe(CN) 6 cathode material was synthesized by ball milling the Fe 4 [Fe(CN) 6 ] 3 / Na 4 Fe(CN) 6 mixture. The obtained NaFeFe(CN) 6 demonstrated a single cubic phase indexed to Fm3m space group similar to Fe 4 [Fe(CN) 6 ] 3 but with larger lattice parameter due to the existence of Na + in the lattice framework. The NaFeFe(CN) 6 electrode delivered first desodiation capacity of 119.4 mAh g -1 and first sodiation capacity of 153.6 mAh g -1 at 0.05C rate. The NaFeFe(CN) 6 showed excellent cycling stability with reversible capacities of 118.2 mAh g -1 and 96.8 mAh g -1 at 0.1C and 1C rate, respectively. In-situ XRD analyses demonstrated a single cubic phase process during charge-discharge of NaFeFe(CN) 6 electrode. Low water content benefited from the solid reaction method and the homogenous single phase process during charge/discharge assured the stable long term cycling performance of the NaFeFe(CN) 6 product.

25 ENERGY STORAGE↗

Reports From The Frontier: Overcoming Limitations for Pure-water Anion-exchange-membrane Electrolysis

Anion-exchange-membrane electrolysis is positioned to play a key role in the predicted exponential growth of green hydrogen technology with essential R&D advances. We reveal key design parameters essential to commercialization. First, stable alkaline oxygen-evolution reaction catalysts with high electronic conductivity and minimal surface reconstruction during operation must be designed. Alkaline catalyst layers must also be applied to the membrane electrode assembly with scalable, industrially relevant techniques. Second, ionomer oxidation mitigation strategies must be developed. Furthermore, this approach could also target other creative catalyst layer design, such as phase-separation control to protect oxidation-prone organic components or catalyst engineering to direct selectivity for hydroxide over polymer oxidation. If competitive efficiency and durability can be achieved in pure water, AEM electrolysis has the potential to become a dominant electrolyzer technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring optical response of MXene thin films

Due to their attractive optical properties, 2D MXenes have garnered interest in nanophotonic and optoelectronic applications. However, tuning their properties typically requires the iterative synthesis of MXenes with a specific set of properties, such as the absorption band position, electronic conductivity, and dielectric constant. We demonstrate how to tailor the optical properties of MXene thin films over a broad 1500-nm wavelength range by mixing different ratios of highly conductive Ti 3 C 2 T x with poorly conductive Nb 2 CT x . By changing the MXene film composition, the epsilon-near-zero (ENZ) point, where the optical properties transit from dielectric to metallic, was varied in the spectral range from 1.1 to 2.6 µm. Additionally, we observed a reduction in absorption in some compositions compared to the absorption of the pure MXene films. Compared to other methods, this approach enables simple and continual tuning of MXene optical properties without requiring multiple time-consuming synthesis steps.

2D materials↗

Synthesis and Characterization of Li4Ti5O12 Anode Materials with Enhanced High-Rate Performance in Lithium-Ion Batteries

ABSTRACT Li 4 Ti 5 O 12 (LTO) represents a promising anode material for lithium ion batteries, however, it suffers from limitations associated with poor intrinsic electron conductivity as well as moderate ionic conductivity. Hence, to achieve the goal of creating LTO anodes with improved high-rate performance, we have put forth a number of targeted fundamental strategies. Herein we discuss the roles of controllably tuning (i) morphology, (ii) attachment modalities of carbon, and (iii) ion doping of the LTO material. In addition, we also demonstrated in situ studies of lithiation-driven structural transformations in LTO via a combination of X-ray absorption spectroscopy and ab initio calculations, which have been proven to be powerful tools to probe the negligible volume change and extraordinary stability of LTO upon repeated charge/discharge cycles.

energy storage (including batteries and capacitors↗