Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electromagnetic waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Interaction between Faraday rotation and Cotton-Mouton effects in polarimetry modeling for NSTX

The evolution of electromagnetic wave polarization is modeled for propagation in the major radial direction in the National Spherical Torus Experiment with retroreflection from the center stack of the vacuum vessel. This modeling illustrates that the Cotton-Mouton effect-elliptization due to the magnetic field perpendicular to the propagation direction-is shown to be strongly weighted to the high-field region of the plasma. An interaction between the Faraday rotation and Cotton-Mouton effects is also clearly identified. Elliptization occurs when the wave polarization direction is neither parallel nor perpendicular to the local transverse magnetic field. Since Faraday rotation modifies the polarization direction during propagation, it must also affect the resultant elliptization. The Cotton-Mouton effect also intrinsically results in rotation of the polarization direction, but this effect is less significant in the plasma conditions modeled. The interaction increases at longer wavelength and complicates interpretation of polarimetry measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mushroom plasmonic metamaterial infrared absorbers

There has been a considerable amount of interest in the development of various types of electromagnetic wave absorbers for use in different wavelength ranges. In particular, infrared (IR) absorbers with wavelength selectivity can be applied to advanced uncooled IR sensors, which would be capable of identifying objects through their radiation spectrum. In the present study, mushroom plasmonic metamaterial absorbers (MPMAs) for the IR wavelength region were designed and fabricated. The MPMAs consist of a periodic array of thin metal micropatches connected to a thin metal plate with narrow silicon (Si) posts. A Si post height of 200 nm was achieved by isotropic XeF{sub 2} etching of a thin Si layer sandwiched between metal plates. This fabrication procedure is relatively simple and is consistent with complementary metal oxide semiconductor technology. The absorption spectra of the fabricated MPMAs were experimentally measured. In addition, theoretical calculations of their absorption properties were conducted using rigorous coupled wave analysis. Both the calculated and measured absorbance results demonstrated that these MPMAs can realize strong selective absorption at wavelengths beyond the period of the array by varying the micropatch width. Absorbance values greater than 90% were achieved. Dual- or single-mode absorption can also be selected by varying the width of the Si posts. Pixel structures using such MPMAs could be used as high responsivity, high resolution and fast uncooled IR sensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser-driven high-power X- and gamma-ray ultra-short pulse source

A novel ultra-bright high-intensity source of X-ray and gamma radiation is suggested. It is based on the double Doppler effect, where a relativistic flying mirror reflects counter-propagating electromagnetic radiation causing its frequency multiplication and intensification, and on the inverse double Doppler effect, where the mirror acquires energy from an ultra-intense co-propagating electromagnetic wave. The role of the flying mirror is played by a high-density thin plasma slab accelerating in the radiation pressure dominant regime. Frequencies of high harmonics generated at the flying mirror by relativistically strong counter-propagating radiation undergo multiplication with the same factor as the fundamental frequency of the reflected radiation, approximately equal to the quadruple of the square of the mirror Lorentz factor.

07 ISOTOPE AND RADIATION SOURCES↗

Coupling Impedance of a Periodic Array of Diaphragms (Erratum)

A method is presented for calculating the high-frequency longitudinal and transverse coupling impedances in a periodic array of diaphragms in a circular perfectly conducting pipe. The method is based on Weinstein's theory of diffraction of a plane electromagnetic wave on a stack of halfplanes. Using Weinstein's solution, it is shown that the problem of finding the beam field in the pipe reduces to an effective boundary condition at the radius of the diaphragms that couples the longitudinal electric field with the azimuthal magnetic one. Solving Maxwell's equations with this boundary condition leads to simple formulae for Z{sub long} and Z{sub tr}. A good agreement with a numerical solution of the problem found by other authors is demonstrated.

43 PARTICLE ACCELERATORS↗

Dielectric haloscopes to search for axion dark matter: theoretical foundations

We study the underlying theory of dielectric haloscopes, a new way to detect dark matter axions. When an interface between different dielectric media is inside a magnetic field, the oscillating axion field acts as a source of electromagnetic waves, which emerge in both directions perpendicular to the surface. The emission rate can be boosted by multiple layers judiciously placed to achieve constructive interference and by a large transverse area. Starting from the axion-modified Maxwell equations, we calculate the efficiency of this new dielectric haloscope approach. This technique could potentially search the unexplored high-frequency range of 10–100 GHz (axion mass 40–400 μeV), where traditional cavity resonators have difficulties reaching the required volume.

79 ASTRONOMY AND ASTROPHYSICS↗

Optimization of the frequency response of a novel GaAs plasmonic terahertz detector

Previously there was reported a new type of high-speed plasmonic THz detector that can operate at room temperature. As an extension of that work, the sensitivity of the detector was investigated over a wide range of sub-THz frequencies. The measured frequency response is not purely monotonic but exhibits oscillatory behaviour with a number of maxima and minima. Our study reveals that such frequency dependence is caused by the interference of electromagnetic waves inside the detector substrate, as the frequencies of these extrema are found to be governed by the substrate thickness. We demonstrate that sensitivity of this type of detector can be optimized for the desired operating frequency within 0.06–0.7 THz spectrum by adjusting the substrate thickness. We also show that a monotonic frequency response with eliminated minima can be achieved by mounting the detector on a specially designed silicon lens.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-scale synthesis, characterization and microwave absorption properties of carbon nanotubes of different helicities

Carbon nanotubes of high helicity (H-HCNTs, Sample A) have been synthesized in large-scale by pyrolysis of acetylene at 450 deg. C over Fe nanoparticles derived from coprecipitation/hydrogen reduction method. With controlled introduction of hydrogen during acetylene pyrolysis, CNTs of low helicity (L-HCNTs, Sample B) and worm-like CNTs (Sample C) were obtained in large quantities. The yields of the CNTs products are high, especially that of H-HCNTs (ca. 7474%). The complex permittivity and permeability of Composites A, B, and C that contain Samples A, B and C (30 wt%) were measured in the 2-18 GHz frequency range. Good absorption of electromagnetic wave (reflection loss<-20 dB) was observed in the 7.18-10.68 and 7.5-10.7 GHz range over Composites B and C (2.0-3.0 mm thickness), respectively. Thus, through the suggested route, CNTs can be produced easily and selectively in large quantities. The lightweight materials can be utilized for microwave absorption. - Graphical abstract: FESEM image of Sample B and reflection loss versus frequency of Composite B (containing 30 wt% of Sample B) in the range of 2-18 GHz.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic-field-driven surface electromagnetic states in the graphene-antiferromagnetic photonic crystal system

The surface electromagnetic states (SEMSs) on graphene, which has a linear carrier dispersion law and is placed in an antiferromagnetic photonic crystal, are theoretically studied in the terahertz frequency range. The unit cell of such a crystal consists of layers of a nonmagnetic insulator and a uniaxial antiferromagnet, the easy axis of which is parallel to the crystal layers. A dc magnetic field is parallel to the easy axis of the antiferromagnet. An expression that relates the SEMS frequencies to the structure parameters is obtained. The problem of SEMS excitation by an external TE-polarized electromagnetic wave is solved, and the dependences of the transmission coefficient on the dc magnetic field and the carrier concentration are constructed. These dependences are shown to differ substantially from the case of a conventional two-dimensional electron gas with a quadratic electron dispersion law. Thus, the positions of the transmission coefficient peaks related to resonance SEMS excitation can be used to determine the character of carrier dispersion law in a two-dimensional electron gas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromagnetic scattering theory for gratings based on the Wiener-Hopf-Fock method

The diffraction problem of a plane electromagnetic wave incident on an ideally conducting grating is solved with the Wiener-Hopf-Fock method. In contrast to the standard Wiener-Hopf method having a single integral equation, the boundary value problem is reduced to a system of integral equations. The short wave asymptotic solution of this system is obtained by means of the saddle point method and expressed in terms of the etalon integral. It contains a resonant denominator which determines the eigenfrequencies of the grating. A precision not below the inclusion of tertiary diffractions is provided by using the saddle point method and the etalon integral for the main contribution of the integrals in the solution. The given method has a clear advantage when the grating consists of a finite number of strips.

97 MATHEMATICS AND COMPUTING↗

Influence of inhomogeneous magnetic field on the characteristics of very high frequency capacitively coupled plasmas

The effect of inhomogeneous magnetic field on the spatial structure of very high frequency (VHF) plasmas is investigated for different coil configurations, gas pressures, high frequency bias powers, and degrees of electronegativity. The simulation results show that the electron density peaks in the center of the chamber for VHF plasmas due to the standing electromagnetic wave effect. On application of a magnetic field, the density increases near the wafer edge and decreases at the chamber center. The radial magnetic field component is found to limit electron loss to the electrodes and locally enhance the electron density. The axial magnetic field component limits plasma diffusion in the radial direction helping preserve the effect of improved electron confinement by the radial magnetic field. The peak electron density decreases with increasing magnetic field as the plasma moves toward the electrode edge occupying a larger volume. The effect of magnetic field becomes weaker at higher pressure due to the increased electron-neutral collisions which reduce the effectiveness of electron confinement around the magnetic field lines. The impact of magnetic field on plasma profile is somewhat weaker in an electronegative Ar/CF{sub 4} plasma because of the presence of less mobile and unmagnetized negative ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring the electron density gradients of dense plasmas by deflectometry using short-wavelength probe

A new and simple experimental technique for the measurement of electron density gradients in dense laser-produced plasmas using an electromagnetic wave probe is presented. The main advantage of this method is the low requirements on coherence of the probing beam. The method is based on measuring the deformation of the Talbot pattern of a two-dimensional grating that stems from the distortion of the probe beam wave-front caused by the gradients of the index of refraction. The compromise between spatial resolution and sensitivity for the given wavelength of the probe beam is set by the experimental design. The proposed technique was experimentally verified on plasmas that were created by either a point focus or a line focus of a laser interacting with various solid targets. In the experiments reported here, all plasmas were probed by a Ne-like Zn x-ray laser beam at 21.2 nm, but the technique is applicable for any wavelength of the probe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ionisation of a quantum dot by electric fields

We have derived analytical formulas for differential and total ionisation probabilities of a two-dimensional quantum dot by a constant electric field. In the adiabatic approximation, we have calculated the probability of this process in the field of a plane electromagnetic wave and in a superposition of constant and alternating electric fields. The imaginary-time method is used to obtain the momentum distribution of the ionisation probability of a bound system by an intense field generated by a superposition of parallel constant and alternating electric fields. The total probability of the process per unit time is calculated with exponential accuracy. The dependence of the results obtained on the characteristic parameters of the problem is investigated. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetized Plasma for Reconfigurable Subdiffraction Imaging

We show that magnetized plasma with appropriately designed parameters supports nearly diffractionless propagation of electromagnetic waves along the direction of the applied magnetic field, arising from their unbounded equifrequency contour in the magnetized plasma. Such a unique feature can be utilized to construct subdiffraction imaging devices, which is confirmed by detailed numerical investigations. Subdiffraction imaging devices based on magnetic plasma do not require microfabrication normally entailed by construction of metamaterials; more importantly, they can be dynamically reconfigured by tuning the applied magnetic field or the plasma density, and therefore they represent a facile and powerful route for imaging applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resonance excitation of polaritons and plasmons at the interface between a uniaxial crystal and a metal

A resonance is theoretically predicted in which a plane electromagnetic wave in a transparent optically uniaxial crystal, reflected from its metallized surface, creates a wave field at the interface whose intensity is considerably higher than the intensity of the incident wave. In the crystal, a high-intensity (bulk or surface) polariton is excited, whereas, in the metal, a large-amplitude localized plasmon is excited. The structure of the fields created in the crystal is close to that of the fields of bulk polaritons at the boundary with a perfectly conducting surface. The nonideality of the metal is taken into account in the Leontovich impedance approximation. Conditions are found under which the resonance is accompanied by a full transformation of the incident wave into a polariton-plasmon localized near the interface. This coupled wave can be considered as a pumped eigenmode. The intensity of the wave field localized at the boundary can amount to 10-15 times the intensity of the incident wave in the visible range. The resonance half-width with respect to the angles of incidence amounts to a few degrees. In the infrared range, the excitation factor can be an order of magnitude higher, while the resonance half-width sharply decreases down to about 0.1{sup o} for a wavelength of 5 {mu}m. Conditions are obtained for the resonance excitation of high-intensity bulk polaritons that arise as reflected modes propagating at a small angle to the boundary. The phenomena investigated are completely attributed to the anisotropy of the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature effects on the nonstationary Karpman-Washimi ponderomotive magnetization in quantum plasmas

The temperature effects on the nonstationary Karpman-Washimi ponderomotive magnetization are investigated in quantum Fermi plasmas. The cyclotron frequency due to the ponderomotive force of the electromagnetic wave has been obtained as a function of the Fermi Debye length and quantum wavelength. It is found that the Karpman-Washimi ponderomotive magnetization decreases with increasing Fermi temperature. The maximum position of the Fermi Debye length is found to be increased with an increase in the frequency in the small Fermi Debye length domain. It is also shown that the Fermi ponderomotive magnetization decreases with increasing frequency in the large Fermi Debye length domain. In addition, it is shown that the frequency dependence on the ponderomotive magnetization diminishes with increasing Fermi temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation of plasmon pulses in the cooperative decay of excitons of quantum dots near a metal surface

The formation of pulses of surface electromagnetic waves at a metal–dielectric boundary is considered in the process of cooperative decay of excitons of quantum dots distributed near a metal surface in a dielectric layer. It is shown that the efficiency of exciton energy transfer to excited plasmons can, in principle, be increased by selecting the dielectric material with specified values of the complex permittivity. It is found that in the mean field approximation, the semiclassical model of formation of plasmon pulses in the system under study is reduced to the pendulum equation with the additional term of nonlinear losses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transmission of evanescent modes through a subwavelength aperture of a cylindrical waveguide. 1. Ideal metal approximation

The transmission of an evanescence electromagnetic wave through the subwavelength aperture of a dielectric cylindrical metal-coated waveguide is studied. In the ideal metal approximation a theoretical approach to the description of the field structure in a nanowaveguide is developed, which takes into account the transformation of the initial wave reflected from the output aperture. The complex reflection coefficient of a supercritical waveguide mode from the subwavelength aperture is calculated. The dependence of the field structure at the waveguide output on the ratio of its radius to the optical wavelength and on the dielectric constants of the waveguide core and the environment is found. The conditions for the appearance of a plasmon resonance in the presence of a medium with the negative dielectric constant in front of the input hole of the waveguide are found. (waveguides)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Frequency sweep rates of rising tone electromagnetic ion cyclotron waves: Comparison between nonlinear theory and Cluster observation

Resonant pitch angle scattering by electromagnetic ion cyclotron (EMIC) waves has been suggested to account for the rapid loss of ring current ions and radiation belt electrons. For the rising tone EMIC wave (classified as triggered EMIC emission), its frequency sweep rate strongly affects the efficiency of pitch-angle scattering. Based on the Cluster observations, we analyze three typical cases of rising tone EMIC waves. Two cases locate at the nightside (22.3 and 22.6 magnetic local time (MLT)) equatorial region and one case locates at the duskside (18MLT) higher magnetic latitude (λ = –9.3°) region. For the three cases, the time-dependent wave amplitude, cold electron density, and cold ion density ratio are derived from satellite data; while the ambient magnetic field, thermal proton perpendicular temperature, and the wave spectral can be directly provided by observation. These parameters are input into the nonlinear wave growth model to simulate the time-frequency evolutions of the rising tones. The simulated results show good agreements with the observations of the rising tones, providing further support for the previous finding that the rising tone EMIC wave is excited through the nonlinear wave growth process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗