Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density functional approximations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Effect of hydrostatic pressure on the structural and electronic properties of Cd{sub 0.75}Cr{sub 0.25}S

In this paper we present the results obtained from first principle calculations of the effect of hydrostatic pressure on the structural and electronic properties of Cd{sub 1-x}Cr{sub x}S diluted magnetic semiconductor in Zinc Blende (B3) phase at x=0.25. High pressure behavior of Cd{sub 1-x}Cr{sub x}S has been investigated between 0 GPa to 100 GPa The calculations have been performed using Density functional theory as implemented in the Spanish Initiative for Electronic Simulations with Thousands of Atoms code using local density approximation as exchange-correlation (XC) potential. Calculated electronic band structures of Cd{sub 1-x}Cr{sub x}S are discussed in terms of contribution of Cr 3d{sup 5} 4s{sup 1}, Cd 4d{sup 10} 5s{sup 2}, S 3s{sup 2} 3p{sup 4} orbital’s. Study of band structures shows half-metallic ferromagnetic nature of Cd{sub 0.75}Cr{sub 0.25}S with 100% spin polarization. Under application of external pressure, the valence band and conduction band are shifted upward which leads to modification of electronic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Brownian motion of a plasma crystal

The dynamics of a plasma crystal under the action of random external forces is considered. The pair correlation functions of the particle displacements are calculated in the harmonic approximation by using the Langevin equations. The case of a planar hexagonal lattice is analyzed in more detail. Analogues of the Van Hove singularities in the spectral densities are discovered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Layer-dependent topological phase in a two-dimensional quasicrystal and approximant

The electronic and topological properties of materials are derived from the interplay between crystalline symmetry and dimensionality. Simultaneously introducing “forbidden” symmetries via quasiperiodic ordering with low dimensionality into a material system promises the emergence of new physical phenomena. Here, we isolate a two-dimensional (2D) chalcogenide quasicrystal and approximant, and investigate their electronic and topological properties. The 2D layers of the materials with a composition close to Ta 1.6 Te, derived from a layered transition metal dichalcogenide, are isolated with standard exfoliation techniques, and investigated with electron diffraction and atomic resolution scanning transmission electron microscopy. Density functional theory calculations and symmetry analysis of the large unit cell crystalline approximant of the quasicrystal, Ta 21 Te 13 , reveal the presence of symmetry-protected nodal crossings in the quasicrystalline and approximant phases, whose presence is tunable by layer number. Our study provides a platform for the exploration of physics in quasicrystalline, low-dimensional materials and the interconnected nature of topology, dimensionality, and symmetry in electronic systems.

36 MATERIALS SCIENCE↗

Approximating Photo- z PDFs for Large Surveys

Modern galaxy surveys produce redshift probability density functions (PDFs) in addition to traditional photometric redshift (photo-z) point estimates. However, the storage of photo-z PDFs may present a challenge with increasingly large catalogs, as we face a trade-off between the accuracy of subsequent science measurements and the limitation of finite storage resources. This work presents qp, a Python package for manipulating parameterizations of one-dimensional PDFs, as suitable for photo-z PDF compression. We use qp to investigate the performance of three simple PDF storage formats (quantiles, samples, and step functions) as a function of the number of stored parameters on two realistic mock data sets, representative of upcoming surveys with different data qualities. We propose some best practices for choosing a photo-z PDF approximation scheme and demonstrate the approach on a science case using performance metrics on both ensembles of individual photo-z PDFs and an estimator of the overall redshift distribution function. We show that both the properties of the set of PDFs we wish to approximate and the fidelity metric(s) chosen affect the optimal parameterization. Additionally, we find that quantiles and samples outperform step functions, and we encourage further consideration of these formats for PDF approximation.

79 ASTRONOMY AND ASTROPHYSICS↗

Density functional theory investigation of the LiIn 1- x Ga x Se 2 solid solution

Here, the electronic structure and optical properties of the LiIn 1-x Ga x Se 2 (x=0, 0.25, 0.5, 0.75, 1) solid solution were studied by density functional theory (DFT) with pure functionals. The exchange-correlation is treated within the local density approximation (LDA) and generalized-gradient approximation (GGA). The electronic structures for each respective compound are discussed in detail. Calculations reveal that gallium incorporation can be used to tune the optical-electrical properties of the solid solution and correlates with the lattice parameter. The band gap trend of the LiIn 1-x Ga x Se 2 system follows a nonlinear behavior between the LiInSe 2 and LiGaSe 2 ternary boundaries. The bowing parameter is estimated to be on the order of 0.1- 0.3 eV at the point. Low-temperature optical absorption revealed a 30% change in the temperature dependence of the band gap for the intermediate compound LiIn 0.6 Ga 0.4 Se 2 compared to ternary boundaries and suggests the heat capacity to be another control element through strain.

36 MATERIALS SCIENCE↗

Multiplicity dependence of light-flavor hadron production in p p collisions at s = 7 TeV

Comprehensive results on the production of unidentified charged particles, $π^±, K^±, K^0_S, K^*(892)^0, p,$ $\bar{p}$, $\phi$ (1020), Λ, $\bar{Λ}$, $\Xi^-$, $\bar{\Xi}^+$, $Ω^-$, and $\bar{Ω}^+$ hadrons in proton-proton ($pp$) collisions at $\sqrt{s}$ = 7 TeV at midrapidity ($|y|$ < 0.5) as a function of charged-particle multiplicity density are presented. In order to avoid autocorrelation biases, the actual transverse momentum ($p$ T ) spectra of the particles under study and the event activity are measured in different rapidity windows. In the highest multiplicity class, the charged-particle density reaches about 3.5 times the value measured in inelastic collisions. While the yield of protons normalized to pions remains approximately constant as a function of multiplicity, the corresponding ratios of strange hadrons to pions show a significant enhancement that increases with increasing strangeness content. Furthermore, all identified particle-to-pion ratios are shown to depend solely on charged-particle multiplicity density, regardless of system type and collision energy. The evolution of the spectral shapes with multiplicity and hadron mass shows patterns that are similar to those observed in $p$-Pb and Pb-Pb collisions at Large Hadron Collider energies. The obtained $p$ T distributions and yields are compared to expectations from QCD-based $pp$ event generators as well as to predictions from thermal and hydrodynamic models. These comparisons indicate that traces of a collective, equilibrated system are already present in high-multiplicity $pp$ collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of Impurities on the Formation Energy of Point Defects in the γ-TiAl Alloy

The projector augmented-wave method within density functional theory is used to study the effect of 4d elements and Group IIIA and IVA elements on the energetics of point defect formation and elastic moduli of the γ-TiAl alloy. To calculate the point defect formation energy, the grand canonical formalism was used. It is shown that the formation energy of aluminum vacancies decreases by approximately 1.3 eV with increasing its content in the series of alloys Ti{sub 3}Al–TiAl–TiAl{sub 3}, whereas the formation energy of titanium vacancies changes insignificantly. In general, the formation of titanium vacancies in these alloys is preferred to the formation of aluminum vacancies. It has been found that Nb, Mo, Tc, Ru, Rh, and Pd impurities on the aluminum sublattice contribute to an increase in the formation energy of an aluminum vacancies, and Mo and Tc also lead to an increase in the formation energy of titanium vacancies. All 4d impurities, if they substitute for titanium, reduce the formation energy of aluminum vacancies, and Nb and Mo are favorable for increasing the formation energy of titanium vacancies. The influence of impurities on the chemical bond in the γ-TiAl alloy and its elastic moduli and characteristics based on them is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multicomponent mutual diffusion in the warm, dense matter regime

In this work, we present the formulation, simulations, and results for multicomponent mutual diffusion coefficients in the warm, dense matter regime. While binary mixtures have received considerable attention for mass transport, far fewer studies have addressed ternary and more complex systems. We therefore explicitly examine ternary systems utilizing the Maxwell-Stefan formulation that relates diffusion to gradients in the chemical potential. Onsager coefficients then connect the macroscopic diffusion to microscopic particle motions, evinced in trajectories characterized by positions and velocities, through various autocorrelation functions (ACFs). These trajectories are generated by molecular dynamics (MD) simulations either through the Born-Oppenheimer approximation, which treats the ions classically and the electrons quantum-mechanically by an orbital-free density-functional theory, or through a classical MD approach with Yukawa pair-potentials, whose effective ionizations and electron screening length derive from quantal considerations. We employ the reference-mean form of the ACFs and determine the center-of-mass coefficients through a simple reference-frame-dependent similarity transformation. The Onsager terms in turn determine the mutual diffusion coefficients. We examine a representative sample of ternary mixtures as a function of density and temperature from those with only light elements (D-Li-C, D-Li-Al) to those with highly asymmetric mass components (D-Li-Cu, D-Li-Ag, H-C-Ag). We also follow trends in the diffusion as a function of number concentration and evaluated the efficacy of various approximations such as the Darken approximation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic continuum quasiparticle random-phase approximation in spherical nuclei

We have calculated the strength distributions of the dipole response in spherical nuclei, ranging all over the periodic table. The calculations were performed within two microscopic models: the discretized quasiparticle random-phase approximation and the continuum quasiparticle random-phase approximation, which takes into account the coupling of the single-particle continuum in an exact way. Pairing correlations are treated with the BCS model. In the calculations, two density functionals were used, namely, the PC-F1 and the DD-PC1. Both are based on relativistic point-coupling Lagrangians. It is explicitly shown that this model is capable of reproducing the giant- as well as the pygmy-dipole resonance for open-shell nuclei in a high level of quantitative agreement with the available experimental observations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Sharp edges to neutral hydrogen disks in galaxies and the extragalactic radiation field

It is shown that the very sharp truncation of the neutral hydrogen distribution seen in NGC 3198 (and probably M33) is well modeled as the result of ionization of the atomic gas by the extragalactic radiation field. Below a critical column density of about a few times 10 exp 19/sq cm the gas is dominantly ionized and undetectable in the 21-cm line. It is inferred from the photoionization models that the total disk gas distribution in NGC 3198 is actually fairly axisymmetric. The critical column density for ionization is not a strong function of galaxy mass or mass distribution; thus, all galaxies should show a cutoff at approximately the same column density. Specific models of 3198 suggest that the extragalactic ionizing photon flux is 5000-10,000 photons/sq cm s.

Maloney, Philip↗

Relative Stability, Electronic Structure and Magnetism of MnN and (Ga,Mn)N Alloys

Pure MnN and (Ga,Mn)N alloys are investigated using the ab initio generalized gradient approximation +U (GGA+U) or the hybrid-exchange density-functional (B3LYP) methods. These methods are found to predict dramatically different electronic structure, magnetic behavior, and relative stabilities compared to previous density-functional theory (DFT) calculations. A unique structural anomaly of MnN, in which local-density calculations fail to predict the experimentally observed distorted rocksalt as the ground-state structure, is resolved under the GGA+U and B3LYP formalisms. The magnetic configurations of MnN are studied and the results suggest the magnetic state of zinc-blende MnN might be complex. Epitaxial calculations are used to show that the epitaxial zinc-blende MnN can be stabilized on an InGaN substrate. The structural stability of (Ga,Mn)N alloys was examined and a crossover from the zinc-blende-stable alloy to the rocksalt-stable alloy at an Mn concentration of {approx}65% was found. The tendency for zinc-blende (Ga,Mn)N alloys to phase separate is described by an asymmetric spinodal phase diagram calculated from a mixed-basis cluster expansion. This predicts that precipitates will consist of Mn concentrations of {approx}5 and {approx}50% at typical experimental growth temperatures. Thus, pure antiferromagnetic MnN, previously thought to suppress the Curie temperature, will not be formed. The Curie temperature for the 50% phase is calculated to be T{sub c} = 354 K, indicating the possibility of high-temperature ferromagnetism in zinc-blende (Ga,Mn)N alloys due to precipitates.

36 MATERIALS SCIENCE↗

Electronic properties of single-layer CoO 2 /Au(111)

Here we report direct measurements via angle-resolved photoemission spectroscopy (ARPES) of the electronic dispersion of single-layer (SL) CoO 2 . The Fermi contour consists of a large hole pocket centered at the $\overline{\Gamma}$ point. To interpret the ARPES results, we use density functional theory (DFT) in combination with the multi-orbital Gutzwiller Approximation (DFT+GA), basing our calculations on crystalline structure parameters derived from x-ray photoelectron diffraction and low-energy electron diffraction. Our calculations are in good agreement with the measured dispersion. We conclude that the material is a moderately correlated metal. We also discuss substrate effects, and the influence of hydroxylation on the CoO 2 SL electronic structure.

36 MATERIALS SCIENCE↗

Path-Integral Monte Carlo Simulation of the Warm Dense Homogeneous Electron Gas

We perform calculations of the 3D finite-temperature homogeneous electron gas in the warm-dense regime $(r_s ≡ (3/4πn)^{1/3}a^{-1}_0 = 1.0 – 40.0$ and $Θ ≡ T/T_F = 0.0625 – 8.0)$ using restricted path-integral Monte Carlo simulations. Precise energies, pair correlation functions, and structure factors are obtained. For all densities, we find a significant discrepancy between the ground state parametrized local density approximation and our results around $T_F$. These results can be used as a benchmark for developing finite-temperature density functionals, as well as input for orbital-free density function theory formulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-consistent implementation of meta-GGA functionals for the ONETEP linear-scaling electronic structure package

Accurate and computationally efficient exchange-correlation functionals are critical to the successful application of linear-scaling density functional theory (DFT). Local and semi-local functionals of the density are naturally compatible with linear-scaling approaches, having a general form which assumes the locality of electronic interactions and which can be efficiently evaluated by numerical quadrature. Presently, the most sophisticated and flexible semi-local functionals are members of the meta-generalized-gradient approximation (meta-GGA) family, and depend upon the kinetic energy density, τ, in addition to the charge density and its gradient. In order to extend the theoretical and computational advantages of τ-dependent meta-GGA functionals to large-scale DFT calculations on thousands of atoms, we have implemented support for τ-dependent meta-GGA functionals in the ONETEP program. In this paper we lay out the theoretical innovations necessary to implement τ-dependent meta-GGA functionals within ONETEP's linear-scaling formalism. We present expressions for the gradient of the τ-dependent exchange-correlation energy, necessary for direct energy minimization. We also derive the forms of the τ-dependent exchange-correlation potential and kinetic energy density in terms of the strictly localized, self-consistently optimized orbitals used by ONETEP. To validate the numerical accuracy of our self-consistent meta-GGA implementation, we performed calculations using the B97M-V and PKZB meta-GGAs on a variety of small molecules. Using only a minimal basis set of self-consistently optimized local orbitals, we obtain energies in excellent agreement with large basis set calculations performed using other codes. Lastly, to establish the linear-scaling computational cost and applicability of our approach to large-scale calculations, we present the outcome of self-consistent meta-GGA calculations on amyloid fibrils of increasing size, up to tens of thousands of atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementation of a generalized coherent elastic scattering formulation for thermal neutron scattering analysis - 14487

The scattering interactions of thermal neutrons in matter are classified into inelastic and elastic components. In crystalline materials, coherent elastic scattering represents a dominant form of interaction. Traditionally, the treatment of this interaction in standard computer codes (e.g., the LEAPR module of the NJOY code system) was performed within the cubic approximation and restricted the analyst to a few materials that were hardwired into the code. In general, these restrictions can hinder the production of ENDF style thermal neutron scattering libraries for new materials outside the current portfolio of treated materials. In this work, a general formulation based on the exact theory of coherent elastic scattering was developed. This formulation is capable of processing the crystalline structure of any material. The cubic approximation is relaxed by accounting for the partial forces from asymmetric crystal structures in the calculation. The atom sites approximation is relaxed by utilizing a site-wise Debye-Waller factor. Specifically, the Debye-Waller factor is no longer regarded as a uniform constant across the crystal but treated as a matrix tensor that uses the integral of the partial phonon density of states. Therefore, the calculation of the coherent elastic scattering cross section is executed by applying the matrix-form of the Debye-Waller factor on each reciprocal space point and summing them up. Furthermore, the developed algorithm supports compounds with any number of elements and of any ratio to each other. This general formulation was successfully implemented and contributed to the production of ENDF style thermal neutron scattering libraries for silicon dioxide (α-SiO{sub 2}) and silicon carbide (3C-SiC). The needed input for the analysis was generated using density functional theory (DFT) atomistic simulations and dynamical matrix calculations for both materials. (authors)

42 ENGINEERING↗

Competing magnetic instabilities in the weak itinerant antiferromagnetic TiAu

The binary intermetallic compound TiAu is distinguished by an extremely sharp and narrow density of states peak at the Fermi level that has been proposed, via scattering between mirrored van Hove singularities, to be the mechanism for antiferromagnetic ordering versus the more fundamental ferromagnetic Stoner instability. Here we study, using density functional theory methods, magnetic tendencies and effects of doping, the latter within the virtual crystal approximation (VCA). Ferromagnetic tendencies are quantified using the fixed spin moment approach, illustrating the strong Stoner instability that does not, however, provide the ground state. Use of VCA results allows the identification of the value of the Stoner exchange constant I = 0.74eV for Ti. Magnetic fluctuations not included with semilocal density functionals are quantified with the procedure provided by Ortenzi and coauthors, with alloy concentrations corresponding to the quantum critical points reduced by a factor of three to five. Furthermore, our results provide useful guidelines for experimental doping studies of TiAu.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fully coupled simulation of cosmic reionization. II. Recombinations, clumping factors, and the photon budget for reionization

We use a fully coupled cosmological simulation including dark matter dynamics, multispecies hydrodynamics, nonequilibrium chemical ionization, flux-limited diffusion radiation transport, and a parameterized model of star formation and feedback (thermal and radiative) to investigate the epoch of hydrogen reionization in detail. In this paper, the first of several application papers, we investigate the mechanics of reionization from stellar sources forming in high-z galaxies, the utility of various formulations for the gas clumping factor on accurately estimating the effective recombination time in the intergalactic medium (IGM), and the photon budget required to achieve reionization. We also test the accuracy of the static and time-dependent models of Madau et al. as predictors of reionization completion/maintenance. We simulate a WMAP7 ΛCDM cosmological model in a 20 comoving Mpc cube, resolved with 800{sup 3} uniform fluid cells and dark matter particles. By tuning our star formation recipe to approximately match the observed high-redshift star formation rate density and galaxy luminosity function, we have created a fully coupled radiation hydrodynamical realization of hydrogen reionization, which begins to ionize at z ≈ 10 and is completed at z ≈ 5.8 without further tuning. We find that roughly two ionizing photons per H atom are required to convert the neutral IGM to a highly ionized state. After reionization concludes, we find that the quantity n-dot{sub ion}×(1 Gyr)/n{sub H} is ∼9 at z = 5, in rough agreement with measurements of the ionizing emissivity by Becker and Bolton. The complicated events during reionization that lead to this number can be generally described as inside-out, but in reality, the narrative depends on the level of ionization of the gas one attributes as being ionized. We find that the formula for the ionizing photon production rate needed to maintain the IGM in an ionized state derived by Madau et al. should not be used to predict the epoch of reionization completion because it ignores history-dependent terms in the global ionization balance which are not ignorable. We find that the time-dependent model for the ionized volume fraction Q{sub HII} is more predictive, but overestimates the redshift of reionization completion z{sub reion} by Δz ≈ 1. We propose a revised formulation of the time-dependent model that agrees with our simulation to a few percent accuracy. Finally, we use our simulation data to measure the absorption of ionizing radiation due to circumgalactic gas resolved on our mesh and find f-bar{sub esc}(CGM)≈0.7.

79 ASTRONOMY AND ASTROPHYSICS↗