Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Intertwined charge, spin, and orbital degrees of freedom under electronic correlations in the one-dimensional Fe 3+ chalcogenide chain

Motivated by recent developments in the study of quasi-one-dimensional iron systems with Fe 2+ , we comprehensively study an Fe 3+ chalcogenide chain system. Based on first-principles calculations, the Fe 3+ chain has a similar electronic structure to that discussed before for the Fe 2+ chain, because of the similar Fe⁢𝑋 4 (𝑋 = S or Se) tetrahedron-chain geometry. Furthermore, a three-orbital electronic Hubbard model for this chain was constructed using the density matrix renormalization group method. A robust antiferromagnetic coupling was unveiled in the chain direction. In addition, in the intermediate electronic correlation 𝑈/𝑊 region, we found an interesting orbital-selective Mott phase with the coexistence of localized and itinerant electrons (𝑈 is the on-site Hubbard repulsion, while 𝑊 is the electronic bandwidth) based on the orbital-selective behavior observed in the charge fluctuations. Furthermore, we do not observe any obvious pairing tendency in the Fe 3+ chain in the electronic-correlation 𝑈/𝑊 region, where superconducting pairing tendencies were reported before in iron ladders. This suggests that superconductivity is unlikely to emerge in the Fe 3+ systems. Finally, our results clearly establish the similarities and differences between Fe 2+ and Fe 3+ iron chains, as well as iron ladders.

density matrix renormalization group↗
DOE OSTI2021

Electron correlations in the cubic paramagnetic perovskite Sr ( V , Mn ) O 3 : Results from fully self-consistent self-energy embedding calculations

In this study, we use the thermodynamically consistent and conserving self-energy embedding theory (SEET) to study the spectra of the prototypical undistorted cubic perovskites SrVO 3 and SrMnO 3 . In the strongly correlated metallic SrVO 3 we find that the usual attribution of the satellite peaks at –1.8 eV to Hund or Hubbard physics in the t 2 g orbitals is inconsistent with our calculations. In the strongly correlated insulator SrMnO 3 we recover insulating behavior due to a feedback effect between the strongly correlated orbitals and the weakly correlated environment. Our calculation shows a systematic convergence of spectral features as the space of strongly correlated orbitals is enlarged, paving the way to a systematic parameter-free study of correlated perovskites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Engineering 2D Square Lattice Hubbard Models in 90° Twisted GeX/SnX (X =S, Se) Moiré Superlattices

Because of the large-period superlattices emerging in moiré two-dimensional (2D) materials, electronic states in such systems exhibit low energy flat bands that can be used to simulate strongly correlated physics in a highly tunable setup. While many investigations have thus far focused on moiré flat bands and emergent correlated electron physics in triangular, honeycomb, and quasi-one-dimensional lattices, tunable moiré realizations of square lattices subject to strong correlations remain elusive. Here, in this work, we propose a feasible scheme to construct moiré square lattice systems by twisting two or more layers of 2D materials in a rectangular lattice by 90°. We demonstrate the concept with twisted GeX/SnX (X =S, Se) moiré superlattices and calculate their electronic structures from first principles. We show that the lowest conduction flat band in these systems can be described by a square lattice Hubbard model with parameters which can be controlled by varying the choice of host materials, number of layers, and external electric fields. In particular, twisted double bilayer GeSe realizes a square lattice Hubbard model with strong frustration due to the next-nearest-neighbor hopping that could host unconventional superconductivity, in close analogy to the Hubbard model for copper-oxygen planes of cuprate high-temperature superconductors. The presented scheme uses 90° twisted 2D materials with rectangular unit cells as a promising platform for realizing the physical phenomena of square lattice Hubbard models, establishing a new route for studying its rich phase diagram of magnetism, charge order, and unconventional superconductivity in a highly tunable setting.

2-dimensional systems↗
DOE OSTI2022

Correlation between Redox Potential and Solvation Structure in Biphasic Electrolytes for Li Metal Batteries

The activity of lithium ions in electrolytes depends on their solvation structures. However, the understanding of changes in Li + activity is still elusive in terms of interactions between lithium ions and solvent molecules. Herein, the chelating effect of lithium ion by forming [Li(15C5)] + gives rise to a decrease in Li + activity, leading to the negative potential shift of Li metal anode. Moreover, weakly solvating lithium ions in ionic liquids, such as [Li(TFSI) 2 ] - (TFSI = bis(trifluoromethanesulfonyl)imide), increase in Li + activity, resulting in the positive potential shift of LiFePO 4 cathode. This allows the development of innovative high energy density Li metal batteries, such as 3.8 V class Li | LiFePO 4 cells, along with introducing stable biphasic electrolytes. In addition, correlation between Li + activity, cell potential shift, and Li + solvation structure is investigated by comparing solvated Li + ions with carbonate solvents, chelated Li + ions with cyclic and linear ethers, and weakly solvating Li + ions in ionic liquids. These findings elucidate a broader understanding of the complex origin of Li + activity and provide an opportunity to achieve high energy density lithium metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Two-temperature warm dense hydrogen as a test of quantum protons driven by orbital-free density functional theory electronic forces

We consider a steady-state (but transient) situation in which a warm dense aggregate is a two-temperature system with equilibrium electrons at temperature Te, ions at Ti, and Te ≠ Ti. Such states are achievable by pump–probe experiments. For warm dense hydrogen in such a two-temperature situation, we investigate nuclear quantum effects (NQEs) on structure and thermodynamic properties, thereby delineating the limitations of ordinary ab initio molecular dynamics. We use path integral molecular dynamics (PIMD) simulations driven by orbital-free density functional theory (OFDFT) calculations with state-of-the-art noninteracting free-energy and exchange-correlation functionals for the explicit temperature dependence. We calibrate the OFDFT calculations against conventional (explicit orbitals) Kohn–Sham DFT. We find that when the ratio of the ionic thermal de Broglie wavelength to the mean interionic distance is larger than about 0.30, the ionic radial distribution function is meaningfully affected by the inclusion of NQEs. Moreover, NQEs induce a substantial increase in both the ionic and electronic pressures. This confirms the importance of NQEs for highly accurate equation-of-state data on highly driven hydrogen. For Te > 20 kK, increasing Te in the warm dense hydrogen has slight effects on the ionic radial distribution function and equation of state in the range of densities considered. In addition, we confirm that compared with thermostatted ring-polymer molecular dynamics, the primitive PIMD algorithm overestimates electronic pressures, a consequence of the overly localized ionic description from the primitive scheme.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Relationship between ductility and the porosity of additively manufactured AlSi10Mg

Additive manufacturing via selective laser melting can result in variable levels of internal porosity both between build plates and within components from the same build. In this work, sample porosity levels were compared to tensile properties for 176 samples spanning eight different build plates. Sample porosity was measured both by Archimedes density, which provided an estimation of overall porosity, and by observation of voids in the fracture surface, which provided an estimation of the porosity at the failure plane. The porosity observed at the fracture surface consistently demonstrated higher porosity than that suggested by Archimedes density. The porosity values obtained from both methods were compared against the mechanical results. Sample porosity appears to have some correlation to the ultimate tensile strength, yield strength, and modulus, but the strongest relationship is observed between porosity and ductility. Three different models were used to relate the fracture surface porosity to the ductility. The first method was a simple linear regression analysis, while the other two models have been used to relate porosity to ductility in cast alloys. It is shown that all three models fit the data well over the observed porosity ranges, suggesting that the models taken from casting theory can extend to additively manufactured metals. Finally, it is proposed that the non-destructive Archimedes method could be used to estimate an approximate sample ductility through the use of correlations realized here. Such a relationship could prove useful for design and for a deeper understanding of the impact of pores on tensile behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Superconductivity and strong correlations in moiré flat bands

Strongly correlated systems can give rise to spectacular phenomenology, from high-temperature superconductivity to the emergence of states of matter characterized by long-range quantum entanglement. Low-density flat-band systems play a vital role because the energy range of the band is so narrow that the Coulomb interactions dominate over kinetic energy, putting these materials in the strongly-correlated regime. Experimentally, when a band is narrow in both energy and momentum, its filling may be tuned in situ across the whole range, from empty to full. Recently, one particular flat-band system—that of van der Waals heterostructures, such as twisted bilayer graphene—has exhibited strongly correlated states and superconductivity, but it is still not clear to what extent the two are linked. As a result, we review the status and prospects for flat-band engineering in van der Waals heterostructures and explore how both phenomena emerge from the moiré flat bands.

Balents, Leon↗
DOE OSTI2023

BICEP/Keck. XVI. Characterizing Dust Polarization through Correlations with Neutral Hydrogen

We characterize Galactic dust filaments by correlating BICEP/Keck and Planck data with polarization templates based on neutral hydrogen (H i) observations. Dust polarization is important for both our understanding of astrophysical processes in the interstellar medium (ISM) and the search for primordial gravitational waves in the cosmic microwave background (CMB). In the diffuse ISM, H i is strongly correlated with the dust and partly organized into filaments that are aligned with the local magnetic field. We analyze the deep BICEP/Keck data at 95, 150, and 220 GHz, over the low-column-density region of sky where BICEP/Keck has set the best limits on primordial gravitational waves. We separate the H i emission into distinct velocity components and detect dust polarization correlated with the local Galactic H i but not with the H i associated with Magellanic Stream i. We present a robust, multifrequency detection of polarized dust emission correlated with the filamentary H i morphology template down to 95 GHz. For assessing its utility for foreground cleaning, we report that the Hi morphology template correlates in B modes at a ~10%–65% level over the multipole range 20 < ℓ < 200 with the BICEP/Keck maps, which contain contributions from dust, CMB, and noise components. We measure the spectral index of the filamentary dust component spectral energy distribution to be β = 1.54 ± 0.13. We find no evidence for decorrelation in this region between the filaments and the rest of the dust field or from the inclusion of dust associated with the intermediate velocity H i. Finally, we explore the morphological parameter space in the H i-based filamentary model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Study of the deformed halo nucleus 31 Ne with Glauber model based on microscopic self-consistent structures

In this work, the exotic deformed nucleus 31 Ne is studied with an approach that combines self-consistent structure and reaction theories. The deformed relativistic Hartree-Bogoliubov theory in continuum (DRHBc) is utilized to demonstrate that deformation and pairing correlations give rise to a halo structure with a large-amplitude p-wave configuration in 31 Ne. Then the valence nucleon wave functions and angle-averaged density distributions of 30 Ne from this theory are used as input for the Glauber reaction model to study the observables of neutron-rich neon isotopes to search halo signatures. With NL1 effective interaction, our predictions of the reaction cross sections for these exotic neon isotopes on a carbon target can better reproduce the experimental data than those from the relativistic mean field model for a spherical shape with resonances and pairing correlation contributions, and are roughly 3.3% (~ 50 mb) larger than those with Gaussian function-fitted densities of the core nuclei. The calculated one-neutron removal cross section at 240 MeV/nucleon, and the inclusive longitudinal momentum distribution of the 30 Ne residues from the 31Ne breakup reaction are largely improved over previous theoretical predictions and agree well with data. These reaction evaluations indicate a dilute density distribution in coordinate space and are a canonical signature of a halo structure. Moreover, our predictions with the NL3 and PK1 effective interactions give slightly better descriptions of reaction observables for exotic neon isotopes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Descriptors for Cu facets for CO2 reduction reaction activity

Computation screening is crucial for designing efficient electrochemical catalysts for carbon dioxide (CO2R) reduction to valuable hydrocarbons and oxygenates. Herein, leveraging density functional theory calculations of the CO adsorption energy ΔE_CO on seventeen Cu terminations, we discover a strong linear correlation between ΔE_CO and the recently experimentally measured CO2R electrochemical currents (ACS Catal. 2022, 12, 11, 6578–6588). Examining the ab initio thermodynamics of the early critical intermediates CO*, COH*, and CHO*, we find that CO* → CHO* is the thermodynamically preferred step, and notably shows a volcano trend with the experimental currents where the maximum CO2R current corresponds to the moderate CHO* formation energy. Importantly, we show that increasing the step and kink density of the Cu termination not only enhances CO adsorption strength but also modulates the CO* → CHO* pathway, as respectively exemplified in the (941) and (741) facets. We also explain why (741) is exceptional with high CO2R activity as measured experimentally due to its relatively low activity toward the hydrogen evolution reaction compared with the other Cu surfaces. Beyond the general CO adsorption energy that only shows a linear trend with CO2R activity, we show that the reaction CO* → CHO* free energy is a descriptor that displays a volcano relationship with the overall CO2R activity on Cu facets.

machine learning↗
DOE OSTI2021

Azimuthal dependence of two-particle transverse momentum current correlations

Two-particle transverse momentum correlation functions are a powerful technique for understanding the dynamics of relativistic heavy-ion collisions. Among these, the transverse momentum correlator G 2 (Δη,Δφ) is of particular interest for its potential sensitivity to the shear viscosity per unit of entropy density η/s of the quark-gluon plasma formed in heavy-ion collisions. We use the UrQMD, AMPT, and EPOS models for Au–Au at √ s NN = 200 GeV and Pb–Pb at √ s NN = 2760 GeV to investigate the long range azimuthal dependence of G 2 (Δη,Δφ), and explore its utility to constrain η/s based on charged particle correlations. We find that the three models yield quantitatively distinct transverse momentum Fourier harmonics coefficients $a$ $^{pT}_{n}$. We also observe these coefficients exhibit a significant dependence on η/s in the context of the AMPT model. These observations suggest that exhaustive measurements of the dependence of G 2 (Δφ) with collision energy, system size, collision centrality, in particular, offer the potential to distinguish between different theoretical models and their underlying assumptions. Exhaustive analyses of G 2 (Δφ) obtained in large and small systems should also be instrumental in establishing new constraints for precise extraction of η/s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

A galactic approach to neutron scattering science

Neutron scattering science is leading to significant advances in our understanding of materials and will be key to solving many of the challenges that society is facing today. Improvements in scientific instruments are actually making it more difficult to analyze and interpret the results of experiments due to the vast increases in the volume and complexity of data being produced and the associated computational requirements for processing that data. New approaches to enable scientists to leverage computational resources are required, and Oak Ridge National Laboratory (ORNL) has been at the forefront of developing these technologies. We recently completed the design and initial implementation of a neutrons data interpretation platform that allows seamless access to the computational resources provided by ORNL. For the first time, we have demonstrated that this platform can be used for advanced data analysis of correlated quantum materials by utilizing the world's most powerful computer system, Frontier. In particular, we have shown the end-to-end execution of the DCA++ code to determine the dynamic magnetic spin susceptibility χ(q, ω) for a single-band Hubbard model with Coulomb repulsion U/t = 8 in units of the nearest-neighbor hopping amplitude t and an electron density of n = 0.65. The following work describes the architecture, design, and implementation of the platform and how we constructed a correlated quantum materials analysis workflow to demonstrate the viability of this system to produce scientific results.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Strongly correlated itinerant magnetism near superconductivity in NiTa 4 Se 8

Metallic ferromagnets with strongly interacting electrons often exhibit remarkable electronic phases such as ferromagnetic superconductivity, complex spin textures, and nontrivial topology. Here, in this report, we discuss the synthesis of a layered magnetic metal NiTa 4 Se 8 (or Ni 1/4 TaSe 2 ) with a Curie temperature of 58 Kelvin. Magnetization data and density functional theory calculations indicate that the nickel atoms host uniaxial ferromagnetic order of about 0.7µ B per atom, while an even smaller moment is generated in the itinerant tantalum conduction electrons. Strong correlations are evident in flat bands near the Fermi level, a high heat capacity coefficient, and a high Kadowaki-Woods ratio. Density functional theory calculations suggest that electron and hole Fermi surfaces in the ferromagnetic phase are associated with opposite spin polarization. When the system is diluted of magnetic ions, the samples become superconducting below about 2 Kelvin. We discuss possible mechanisms for superconductivity in this family.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Machine learning the Hubbard U parameter in DFT+U using Bayesian optimization

Abstract Within density functional theory (DFT), adding a Hubbard U correction can mitigate some of the deficiencies of local and semi-local exchange-correlation functionals, while maintaining computational efficiency. However, the accuracy of DFT+U largely depends on the chosen Hubbard U values. We propose an approach to determining the optimal U parameters for a given material by machine learning. The Bayesian optimization (BO) algorithm is used with an objective function formulated to reproduce the band structures produced by more accurate hybrid functionals. This approach is demonstrated for transition metal oxides, europium chalcogenides, and narrow-gap semiconductors. The band structures obtained using the BO U values are in agreement with hybrid functional results. Additionally, comparison to the linear response (LR) approach to determining U demonstrates that the BO method is superior.

Chemistry↗
DOE OSTI2023

Drop Interactions with the Conical Shock Structure Generated by a Mach 4.5 Projectile

This work presents measurements of liquid drop deformation and breakup time behind approximately conical shock waves and evaluates the predictive capabilities of low-order models and correlations developed using planar shock experiments. A conical shock was approximated by firing a bullet at Mach 4.5 past a vertical column of water drops with a mean initial diameter of $192$ $\mu$m. The time-resolved drop position and maximum transverse dimension were characterized using backlit stereo images taken at 500 kHz. The gas density and velocity fields experienced by the drops were estimated using a Reynolds-averaged Navier–Stokes simulation of the bullet. Classical correlations predict drop breakup times and deformation in error by a factor of 3 or more. The Taylor analogy breakup (TAB) model predicts deformed drop diameters that agree within the confidence bounds of the ensemble-averaged experimental values using a dimensionless constant $C$ 2 = $2$ compared to the accepted value $C$ 2 = $2/3$. In conclusion, results demonstrate existing correlations are inadequate for predicting the drop response to the three-dimensional relaxation of the flowfield downstream of a conical-like shock and suggest the TAB model results represent a path toward improved predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Entanglement and seniority

In quantum mechanics entanglement is the most striking phenomenon which has no counterpart in classical systems. Although, different approaches have already been developed to study correlations in the case of indistinguishable particles, the exploration of the so-called mode entanglement is still in its initial stage in nuclear physics. Study of mode-entanglement in the seniority model, derivation of analytic formulas for the one-body reduced density matrix of states with seniority $ν$ = 0, 1, 2, and $ν$ = 3, and also determination of the particle number dependence of the one-body reduced density matrix for arbitrary seniority. In addition, comparison of the predictions of the seniority model with the results of the shell model to gain insight into the structure and correlations of the ground and lowest yrast states. In the seniority model the analytic results are calculated using the quasi-spin formalism. The numerical shell model calculations are carried out in the standard shell model framework using an inert core. The applied realistic effective interactions are derived earlier using the $G$-matrix formalism. The density matrix renormalization group method is also applied in order to directly calculate the mode entropies. In the seniority model simple analytical expressions are given for the mode entropies. The peculiar behavior of the half-filled shells and the seniority-zero states are revealed. Numerical results are presented for the lightest stable calcium isotopes and for 94 Ru nucleus. For 94 Ru, the seniority model accounts for the 0$g$ 9/2 mode entropies, but seniority mixing is important for certain yrast states. Furthermore, interaction induced quantum fluctuations decrease the occupation of the 0$f$ 5/2 , 1$p$ 3/2 and 1$p$ 1/2 shells, and amount in non-negligible mode entropies on these shells, too, clearly outside the scope of the simple (0$g$ 9/2 ) 4 seniority model. The 0$f$ 7/2 shell-based seniority model is more accurate for the Ca isotopes, but seniority mixing is substantial for some 44 Ca yrast states, too. Mode and one-body entanglement entropies are useful tools to investigate the structure of quantum correlations in nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Gold-tantalum alloy films deposited by high-density-plasma magnetron sputtering

Gold-tantalum alloy films are of interest for biomedical and magnetically-assisted inertial confinement fusion applications. Here, we systematically study the effects of substrate tilt (0°–80°) and negative substrate bias (0–100 V) on properties of ≲3-μm-thick films deposited by high-power impulse magnetron sputtering (HiPIMS) from a Au–Ta alloy target (with 80 at. % of Ta). Results reveal that, for all the substrate bias values studied, an increase in substrate tilt leads to a monotonic decrease in film thickness, density, residual compressive stress, and electrical conductivity. Larger substrate bias favors the formation of a body-centered cubic phase, with films exhibiting lower column tilt and higher density, electrical conductivity, and residual compressive stress. Furthermore, these changes are attributed to metal atom ionization effects, based on the lack of correlation with distributions of landing energies and incident angles of depositing species as calculated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. By varying substrate tilt and bias in HiPIMS deposition, properties of Au–Ta alloy films can be controlled in a very wide range, including residual stress from –2 to +0.5 GPa, density from 12 to 17 g/cm 3 , and the electrical resistivity from 50 to 4500 μΩ cm, enabling optimum deposition conditions to be selected for specific applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Machine Learning Prediction of the Experimental Transition Temperature of Fe(II) Spin-Crossover Complexes

Spin-crossover (SCO) complexes are materials that exhibit changes in the spin state in response to external stimuli, with potential applications in molecular electronics. It is challenging to know a priori how to design ligands to achieve the delicate balance of entropic and enthalpic contributions needed to tailor a transition temperature close to room temperature. Here, we leverage the SCO complexes from the previously curated SCO-95 data set [Vennelakanti et al. J. Chem. Phys. 159, 024120 (2023)] to train three machine learning (ML) models for transition temperature (T 1/2 ) prediction using graph-based revised autocorrelations as features. We perform feature selection using random forest-ranked recursive feature addition (RF-RFA) to identify the features essential to model transferability. Of the ML models considered, the full feature set RF and recursive feature addition RF models perform best, achieving moderate correlation to experimental T 1/2 values. We then compare ML T 1/2 predictions to those from three previously identified best-performing density functional approximations (DFAs) which accurately predict SCO behavior across SCO-95, finding that the ML models predict T 1/2 more accurately than the best-performing DFAs. In addition, we study ML model predictions for a set of 18 SCO complexes for which only estimated T 1/2 values are available. Upon excluding outliers from this set, the RF-RFA RF model shows a strong correlation to estimated T 1/2 values with a Pearson’s r of 0.82. In contrast, DFA-predicted T 1/2 values have large errors and show no correlation to estimated T 1/2 values over the same set of complexes. Overall, our study demonstrates slightly superior performance of ML models in comparison with some of the best-performing DFAs, and we expect ML models to improve further as larger data sets of SCO complexes are curated and become available for model training.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗