Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

IMERG Reaching for 20 Years

The new V06 IMERG is briefly reviewed, then key data visualizations are shown, including the zonal profile of calibration by GPCP, the long-term time series of ocean estimates for the Final Run (with comparison to TMPA and GPCP SG), the time series of tropical ocean rainrate histogram, diurnal cycle, and atoll validation at the monthly time scale.

Huffman, George J.↗

Flow and Noise from Supersonic Plug Nozzles

Nozzles with external plugs are candidates for propulsion of future supersonic aircraft. A model-scale experimental study is conducted exploring the flow and noise characteristics of various plug nozzles. For a given outer nozzle, the plug geometry is varied from conic with various half-angles (lengths) to plugs designed by the method of characteristics (MoC) as well as truncated and porous plugs. So far, noise characteristics and schlieren flow visualization data have been acquired. Limited numerical simulations have also been done addressing thrust performance. The simulations show that the MoC plugs out-perform the conic cases, especially around high Mach number cruise conditions. The experimental data, however, show that the MoC plugs are noisy relative to the conic cases at low Mach number landing and takeoff (LTO) conditions. The increased noise (with MoC at LTO) is accompanied by unsteady turbulent structures and increased jet spreading, as seen in schlieren pictures. At LTO, the longest conic plug is found to be the least noisy. Furthermore, a porous surface on the long conic plug effectively suppresses broadband shock associated noise (BBSN) at higher Mach numbers. Thus, a dilemma remains. MoC design gives best thrust performance at cruise but it is noisy at LTO. A long conic plug, on the other hand, is quieter at LTO but may have unacceptable thrust at cruise.

jets↗

Distributed Lunar Data Platform with Advanced Machine Learning Capabilities in Support of Lunar Science and Exploration

The United States 2020 Space Policy directive declares that NASA, in cooperation with private industry, will “extend human economic activity into deep space by establishing a permanent human presence on the Moon”. This goal will require advanced data management, as well as analysis, modeling and representation of lunar information in order to prepare for Artemis human missions, lunar science investigations and exploration. To meet this requirement, we conceptualize and present an implementation strategy for a distributed platform for lunar data retrieval, inferencing and analysis, which will be based on federated learning and the NASA Celestial Mapping System (CMS). In addition to demonstrating the imperative of enabling lunar-borne data to remain in-situ but still accessible, this presentation will also include examples of how third parties could contribute both datasets and new functionality into this platform using an AI-based data import pipeline and a plug-in architecture respectively.

Artificial Intelligence↗

Flow and noise from supersonic plug nozzles

Nozzles with external plugs are candidates for propulsion of future supersonic aircraft. A model-scale experimental study is conducted exploring the flow and noise characteristics of various plug nozzles. For a given outer nozzle, the plug geometry is varied from conic with various half-angles (lengths) to plugs designed by the method of characteristics (MoC) as well as truncated and porous plugs. So far, noise characteristics and schlieren flow visualization data have been acquired. Limited numerical simulations have also been done addressing thrust performance. The simulations show that the MoC plugs out-perform the conic cases, especially around high Mach number cruise conditions. The experimental data, however, show that the MoC plugs are noisy relative to the conic cases at low Mach number landing and takeoff (LTO) conditions. The increased noise (with MoC at LTO) is accompanied by unsteady turbulent structures and increased jet spreading, as seen in schlieren pictures. At LTO, the longest conic plug is found to be the least noisy. Furthermore, a porous surface on the long conic plug effectively suppresses broadband shock associated noise (BBSN) at higher Mach numbers. Thus, a dilemma remains. MoC design gives best thrust performance at cruise but it is noisy at LTO. A long conic plug, on the other hand, is quieter at LTO but may have unacceptable thrust at cruise.

jets↗

Mining the Gravity Mutants of Arabidopsis

Gravity mutants are a valuable resource for understanding gravity perception, signaling, and response in plants. A review of 190 publications resulted in a list of 97 loci with mutations that caused a gravitropic phenotype. While all these mutants show some form of gravity phenotype, several are also generally defective in growth. After removing these nonspecific mutants, 76 loci were deemed to have true gravity mutants. The gene list was then used to create a sortable database containing key factors of gravity signaling as well as data on methodologies and the development of mutant lines. Indexing this database has allowed us to pull out trends that were not visible in individual publications. For example, mutants that are unable to rearrange starch statoliths make up a larger proportion of the described inflorescence stems mutants than any other organ. Comparing these statolith mutants across organs shows that root and inflorescence stems consistently display different phenotypes for the same class of defect. The more severe gravity defects are most commonly described in root tissue while other tissues are more likely to show only a delayed or reduced response to gravity. The experience of members of the GeneLab plant Analytics Working Group (AWG) in data visualization and gene mapping have sparked new ideas for utilizing this database. Knowledge of shared traits, mutant development, and growth can provide a new resource for the production of seed lines specialized for their response to gravity.

gravitropism↗

Flow Physics Study of Sweeping Jet Actuation on a NACA 0015 Swept Wing Configuration

Preliminary results from a recently completed active flow control (AFC) experiment on a 30 deg swept, semispan wing are presented. The constant chord NACA 0015 wing is configured with sweeping jet actuators at the flap shoulder to study the effects of excitation introduced into a separated, three-dimensional flowfield. The research is aimed at developing efficient active flow control approaches for swept wing configurations. Oil and tuft flow visualization data, steady and unsteady pressure data, particle image velocimetry (PIV), oil flow interferometry (OFI), and force and moment data are used to compare the flowfields with and without AFC. The parameters that were varied include freestream velocity, actuator momentum coefficient, and flap deflection angle.

active flow control↗

Flow Physics Study of Sweeping Jet Actuation on an NACA 0015 Swept Wing Configuration

Results from a recently completed active flow control (AFC) experiment on a low aspect ratio, AR = 4.35, 30 degree swept, semispan wing with a 30% chord trailing edge flap are presented. The constant chord NACA 0015 wing is configured with sweeping jet actuators at the flap shoulder to facilitate our study of three-dimensional, swept wing separated and AFC controlled flowfields on the flap. Two flap deflection angles (delta_f = 0 degrees and 20 degrees) are examined. Oil and tuft flow visualization data, steady and unsteady pressure data, and particle image velocimetry (PIV) complement the balance lift and drag data. These results are used to examine smooth body separation, fixed separation, and the AFC-controlled flap flowfield downstream of a sweeping jet actuator. A momentum coefficient of 1.1% reattaches the flow to the flap surface when flap delta_f = 20 degrees increasing lift by approximately 0.26. This fundamental study is a first step in a research effort focused on improving the efficiency of AFC systems for swept wing applications.

active flow control↗

Risks of Increased Earth Independence

As human space exploration begins to extend beyond the immediate vicinity of Earth, the ability of expertise on the ground to support operations will progressively decrease. Ground control expertise has been the primary countermeasure preventing loss of life and mission over the past sixty years and it will be gradually stripped away as expeditions reach further into space. The large, flexible and adaptive teams of experts on the ground, provide not only engineering analysis and problem-solving but also greatly increased work capacity. Monitoring of the large and fast moving stream of telemetry data is carried out around the clock by 20-30 flight controllers per shift. Analysis of that data and troubleshooting is carried out by an additional 50-100 engineers per shift. Artificial intelligence capabilities will need to be part of the solution but will not the entire solution. As progress continues to be made on intelligent systems, especially those for use in complex, dynamic environments where humans will remain a part of the activity, there is an ever increasing need to focus on how those systems will interact with the humans. Although capabilities such as natural language processing and facial recognition have become common place, even basic aspects of problem-solving, causal reasoning and generative decision-making remain well-beyond of our current capabilities. Advanced data visualization, procedure execution support, and new training approaches will be needed to close the gap between what is currently provided by experts on the ground and what the crew will need to do in increasingly autonomous ways with greater distance from Earth.

human-systems integration architecture↗

Enterprise level fuel inventory management simulation and optimization.

The objective is to find the optimal fuel inventory management strategy roadmap for each supplier along the fuel delivery supply chain. SoSAT (System of Systems Analysis Toolset) Enterprise is a suite of software tools: State Model tool; Stochastic simulation tool; Advanced data visualization tools; and Optimization tools. Initially designed to provide DoDand supporting organizations the capability to analyze a System-of-Systems (SoS) and its various platforms: (1) Supporting multiple US Army Program Executive Office Integration (PEO-I) trade studies; (2) Supporting US Army Program Executive Office of Ground Combat Systems (PEO GCS) for Fleet Management and Modernization Planning initiative; and (3) Participating in formal Verification, Validation & Accreditation effort with Army Organizations (AMSAA and ATEC).

99 GENERAL AND MISCELLANEOUS↗

IMPLEMENTING THE STANDARD SPECTRUM METHOD FOR ANALYSIS OF β-γ COINCIDENCE SPECTRA

The standard deconvolution analysis tool (SDAT) algorithms were developed and tested at the University of Texas at Austin. These algorithms utilize the standard spectrum technique for spectral analysis of {beta}-{gamma} coincidence spectra for nuclear explosion monitoring. Work has been conducted under this contract to implement these algorithms into a useable scientific software package with a graphical user interface. Improvements include the ability to read in PHD formatted data, gain matching, and data visualization. New auto-calibration algorithms were developed and implemented based on 137Cs spectra for assessment of the energy vs. channel calibrations. Details on the user tool and testing are included.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Neutron Imaging of Archaeological Bronzes

This article presents the initial results of 2-D and 3-D neutron imaging of bronze artifacts using the CG-1D prototype beamline at the High Flux Isotope Reactor (HFIR) located at the Oak Ridge National Laboratory (ORNL). Neutron imaging is a non-destructive technique capable of producing unprecedented three-dimensional information on archaeomaterials, including qualitative, quantitative, and visual data on impurities, composition change, voids, and c

Ryzewski, Krysta↗

Use of Social Media to Target Information-Driven Arms Control and Nonproliferation Verification

There has been considerable discussion within the national security community, including a recent workshop sponsored by the U.S. State Department, about the use of social media for extracting patterns of collective behavior and influencing public perception in areas relevant to arms control and nonproliferation. This paper seeks to explore if, and how, social media can be used to supplement nonproliferation and arms control inspection and monitoring activities on states and sites of greatest proliferation relevance. In this paper, we set the stage for how social media can be applied in this problem space and describe some of the foreseen challenges, including data validation, sources and attributes, verification, and security. Using information analytics and data visualization capabilities available at Pacific Northwest National Laboratory (PNNL), we provide graphical examples of some social media "signatures" of potential relevance for nonproliferation and arms control purposes. We conclude by describing a proposed case study and offering recommendations both for further research and next steps by the policy community.

Social media analytics, open source information an↗

A scalable messaging system for accelerating discovery from large scale scientific simulations

Emerging scientific and engineering simulations running at scale on leadership-class High End Computing (HEC) environments are producing large volumes of data, which has to be transported and analyzed before any insights can result from these simulations. The complexity and cost (in terms of time and energy) associated with managing and analyzing this data have become significant challenges, and are limiting the impact of these simulations. Recently, data-staging approaches along with in-situ and in-transit analytics have been proposed to address these challenges by offloading I/O and/or moving data processing closer to the data. However, scientists continue to be overwhelmed by the large data volumes and data rates. In this paper we address this latter challenge. Specifically, we propose a highly scalable and low-overhead associative messaging framework that runs on the data staging resources within the HEC platform, and builds on the staging-based online in-situ/in- transit analytics to provide publish/subscribe/notification-type messaging patterns to the scientist. Rather than having to ingest and inspect the data volumes, this messaging system allows scientists to (1) dynamically subscribe to data events of interest, e.g., simple data values or a complex function or simple reduction (max()/min()/avg()) of the data values in a certain region of the application domain is greater/less than a threshold value, or certain spatial/temporal data features or data patterns are detected; (2) define customized in-situ/in-transit actions that are triggered based on the events, such as data visualization or transformation; and (3) get notified when these events occur. The key contribution of this paper is a design and implementation that can support such a messaging abstraction at scale on high- end computing (HEC) systems with minimal overheads. We have implemented and deployed the messaging system on the Jaguar Cray XK6 machines at Oak Ridge National Laboratory and the Lonestar system at the Texas Advanced Computing Center (TACC), and we present the experimental performance evaluation using these HEC platforms in the paper.

Jin, Tong↗

Black Pine Circle Project

A group of seventh graders from Black Pine Circle school in Berkeley had the opportunity to experience the Advanced Light Source (ALS) as "users" via a collaborative field trip and proposal project. The project culminated with a field trip to the ALS for all seventh graders, which included a visit to the ALS data visualization room, a diffraction demonstration, a beamline tour, and informative sessions about x-rays and tomography presented by ALS scientists.

3D PRINTING↗

ISMB Conference Proceedings

This special issue comprises the papers accepted for presentation at the 19th Annual International Conference on Intelligent Systems for Molecular Biology, joint with the 10th European Conference on Computational Biology, an official conference of the International Society for Computational Biology (ISCB; http://www.iscb.org). ISMB/ECCB 2011 (http://www.iscb.org/ismb2011/) will take place in Vienna, Austria, from July 17 through July 19, 2011; preceded during July 14–16 by eight 1- or 2- day Special Interest Group (SIG) meetings, three satellite meetings and nine half-day tutorials; and followed by two additional satellite meetings. The 48 papers in this volume were selected from 258 submitted papers. Submitted papers were assigned to 13 areas. Area Chairs led each topic area by selecting their area's program committee and overseeing the reviewing process. Many Area Chairs were new compared to 2010, and two completely new areas were added in 2011, ‘Data Visualization’ and ‘Mass Spectrometry and Proteomics’. Six papers for which Area Chairs were in conflict were reviewed under a ‘Conflicts Management’ section headed by the Proceedings Chairs; one such paper was accepted in ‘Bioimaging’. Areas, co-chairs and acceptance information are listed in Table 1. Compared to prior years, five mature topic areas had steady submissions, ‘Evolution and Comparative Genomics’, ‘Gene Regulation and Transcriptomics’, ‘Protein Structure and Function’, ‘Sequence Analysis’, ‘Text Mining’. Two areas newer to ISMB were underrepresented this year, ‘Bioimaging’ and ‘Disease Models and Epidemiology’. One area doubled, ‘Applied Bioinformatics’, renamed from last year's ‘Other Bioinformatics Applications’; and one tripled, ‘Protein Interactions and Molecular Networks’. Across the areas, 326 members of the bioinformatics community provided reviews. Most papers received three reviews and several received four or more. There was significant discussion of the merits of the papers first between referees and the Area Chairs, and then between Area Chairs and the proceedings chairs. Initial decisions to accept papers were made during a comprehensive conference call with the Area Chairs, and several papers underwent a further evaluation by additional Area Chairs before acceptance decisions were finalized. We appreciate that in several cases reviewers' opinions might have changed with additional input or further clarifications from the authors; because the ISMB/ECCB 2011 timeline did not allow for a second round of reviews, however, only papers where referees suggested minor revisions could be accepted. For several papers where referee comments might have been unclear to the authors, Area Chairs added additional comments and explanations. In total, 48 papers were conditionally accepted, pending revision. After acceptance notices were sent, the authors had 2 weeks to modify their papers according to the suggestions made by the reviewers and to respond to the reviewers' comments. Modified papers and authors' responses were reexamined during the next week to ensure each paper was modified appropriately in response to the reviewers' comments. We were pleased that all 48 conditionally accepted papers were finally accepted for the conference. The final acceptance rate was 19%, similar to the rates of 20% and 19% in the two prior years. Collectively, the 48 accepted papers had 185 authors from 18 countries across 6 continents, with 82 authors from North America, 54 from Europe, 25 from Asia (excluding Israel), 10 from Israel, 9 from Australia, 4 from South America and 1 author from Africa. We thank the area chairs and reviewers for their hard work and dedication to maintaining a professional review process. We thank all authors of submitted papers and authors of accepted papers for their diligences in responding to reviewer comments within 2 weeks. We thank Steven Leard's team for extensive technical support with the EasyChair submission and reviewing system; Mona Singh and Joel S. Bader for sharing their experience from last year; the team at Oxford University Press for typesetting the papers; Conference Chairs Burkhard Rost, Michal Linial, Peter Schuster and Kurt Zatloukal, as well as the ISMB/ECCB 2011 Steering Committee, for their valuable input; and Steven Leard for helping us oversee the process.

60 APPLIED LIFE SCIENCES↗

BSDF Viewer

BSDF Viewer is a java application created with processing(http://processing.org/) that allows users to load a LBNL Window BSDF XML file and explore the data visually. BSDF Viewer only supports the full Klems BSDF for now. BSDF Viewer Web Applet: You can use the web applet of BSDF Viewer without downloading anything to your computer: http://gaia.lbl.gov/people/andy/public/BSDF_Viewer/webapplet/ When using the web applet you'll be asked permission to allow gaia.lbl.gov to access your computer. This is necessary for you to load BSDF files from your computer. I've self-signed the applet, so it won't be able to verify the digital signature. If you don't trust me (and why should you) you can deny access to your computer and proceed to the applet but you wont be able to load a BSDF file. BSDF Viewer Program Download: You can download stand alone versions BSDF viewer to your computer: BSDF Viewer for Mac OSX BSDF Viewer for Linux BSDF Viewer for Windows Account Number I3227

McNeil, Andrew↗

DVIEW

DView is a time series data visualization tool that provides several different ways to plot time series datasets. It is particularly well suited for browsing the results of energy systems simulation programs such as BeOpt, SAM, and PVWatts.

Dobos, Aron↗

AN OVERVIEW OF REDUCED ORDER MODELING TECHNIQUES FOR SAFETY APPLICATIONS

The RISMC project is developing new advanced simulation-based tools to perform Computational Risk Analysis (CRA) for the existing fleet of U.S. nuclear power plants (NPPs). These tools numerically model not only the thermal-hydraulic behavior of the reactors primary and secondary systems, but also external event temporal evolution and component/system ageing. Thus, this is not only a multi-physics problem being addressed, but also a multi-scale problem (both spatial, µm-mm-m, and temporal, seconds-hours-years). As part of the RISMC CRA approach, a large amount of computationally-expensive simulation runs may be required. An important aspect is that even though computational power is growing, the overall computational cost of a RISMC analysis using brute-force methods may be not viable for certain cases. A solution that is being evaluated to assist the computational issue is the use of reduced order modeling techniques. During the FY2015, we investigated and applied reduced order modeling techniques to decrease the RISMC analysis computational cost by decreasing the number of simulation runs; for this analysis improvement we used surrogate models instead of the actual simulation codes. This article focuses on the use of reduced order modeling techniques that can be applied to RISMC analyses in order to generate, analyze, and visualize data. In particular, we focus on surrogate models that approximate the simulation results but in a much faster time (microseconds instead of hours/days).

97 MATHEMATICS AND COMPUTING↗