Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conceptual models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

An Integrated Vehicle Modeling Environment

This paper describes an Integrated Vehicle Modeling Environment for estimating aircraft geometric, inertial, and aerodynamic characteristics, and for interfacing with a high fidelity, workstation based flight simulation architecture. The goals in developing this environment are to aid in the design of next generation intelligent fight control technologies, conduct research in advanced vehicle interface concepts for autonomous and semi-autonomous applications, and provide a value-added capability to the conceptual design and aircraft synthesis process. Results are presented for three aircraft by comparing estimates generated by the Integrated Vehicle Modeling Environment with known characteristics of each vehicle under consideration. The three aircraft are a modified F-15 with moveable canards attached to the airframe, a mid-sized, twin-engine commercial transport concept, and a small, single-engine, uninhabited aerial vehicle. Estimated physical properties and dynamic characteristics are correlated with those known for each aircraft over a large portion of the flight envelope of interest. These results represent the completion of a critical step toward meeting the stated goals for developing this modeling environment.

Totah, Joseph J.↗
NASA NTRS2013

Conceptual Design and Structural Analysis of an Open Rotor Hybrid Wing Body Aircraft

Through a recent NASA contract, Boeing Research and Technology in Huntington Beach, CA developed and optimized a conceptual design of an open rotor hybrid wing body aircraft (HWB). Open rotor engines offer a significant potential for fuel burn savings over turbofan engines, while the HWB configuration potentially allows to offset noise penalties through possible engine shielding. Researchers at NASA Langley converted the Boeing design to a FLOPS model which will be used to develop take-off and landing trajectories for community noise analyses. The FLOPS model was calibrated using Boeing data and shows good agreement with the original Boeing design. To complement Boeing s detailed aerodynamics and propulsion airframe integration work, a newly developed and validated conceptual structural analysis and optimization tool was used for a conceptual loads analysis and structural weights estimate. Structural optimization and weight calculation are based on a Nastran finite element model of the primary HWB structure, featuring centerbody, mid section, outboard wing, and aft body. Results for flight loads, deformations, wing weight, and centerbody weight are presented and compared to Boeing and FLOPS analyses.

Gern, Frank H.↗
NASA NTRS1984

Mathematical synthesization of complex structures

A mathematical synthesization approach for rapidly modeling and analyzing complex structures comprised of hundreds or thousands of repeating individual structural members, interconnecting hardware, and other components was described. The techniques are applicable to any structure with repeating structural members. The capabilities are embodied within the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) computer-aided design system. IDEAS has a full range of integrated spacecraft modeling, design, analysis, performance, and cost estimating capabilities which include about 40 technical program and executive, data base, and file management systems. With IDEAS, a single user at an interactive terminal can create, design, analyze, and conduct parametric studies of Earth orbiting spacecraft in a timely, cost-efficient manner. The system is particularly useful in the conceptual design phases of advanced space missions when a multiplicity of concepts must be evaluated. The IDEAS interactive finite-element modeling capabilities are discussed. The mathematical synthesization programs were structured not only to provide a detailed finite-element model of the structure but also to automatically perform the many auxiliary computations needed to analyze the spacecraft in its orbital operational environment.

Garrett, L. B.↗
DOE OSTI2022

A Data Quality-Aware Framework to Reliably Forecast Photovoltaic Generation and Consumer Load for an Improved Resilience of Microgrids

Photovoltaic (PV) power and consumer load forecasting plays a critical role to ensure operational resilience of the electric grid. Most data-driven forecasting algorithms rely heavily on the continuous availability of good quality data for periodic training and validation. When deployed at the grid’s edge, prolonged disruptions to communications during extreme events degrade data quality. Factors such as missing observations, epistemic uncertainties, data drift, and concept drift are manifestations of data quality that impact the generalization of such field-deployed forecasting models. Currently, there exists no mechanism in the literature to dynamically switch between models under varying degrees of data quality as quantified by certain metrics for each factor highlighted above. This paper addresses this shortcoming by conceptually introducing a data qualityaware framework for reliable PV generation and consumer load forecasting. The framework’s design incorporates components of missing values, divergence tests, and continuous monitoring of generalization performance to detect changes in data quality caused by communications disruptions and trigger specific classes of forecasting models grouped under three use cases (UC1- UC3). As a first step towards validating this framework, real data collected from an actual field microgrid system is used to demonstrate the viability of the three use cases. Results show that the performance is the best in UC1 with an unadjusted R-square value of 0.954, followed by 0.939 for UC2 and 0.757 for UC3.

Sundararajan, Aditya↗
NASA NTRS1999

User's Guide for ENSAERO_FE Parallel Finite Element Solver

A high fidelity parallel static structural analysis capability is created and interfaced to the multidisciplinary analysis package ENSAERO-MPI of Ames Research Center. This new module replaces ENSAERO's lower fidelity simple finite element and modal modules. Full aircraft structures may be more accurately modeled using the new finite element capability. Parallel computation is performed by breaking the full structure into multiple substructures. This approach is conceptually similar to ENSAERO's multizonal fluid analysis capability. The new substructure code is used to solve the structural finite element equations for each substructure in parallel. NASTRANKOSMIC is utilized as a front end for this code. Its full library of elements can be used to create an accurate and realistic aircraft model. It is used to create the stiffness matrices for each substructure. The new parallel code then uses an iterative preconditioned conjugate gradient method to solve the global structural equations for the substructure boundary nodes.

Eldred, Lloyd B.↗
DOE OSTI2026

Numerical investigation of liquid wall ablation in inertial fusion energy chambers

This paper presents a novel approach for modeling liquid wall ablation in liquid wall-protected inertial fusion energy (IFE) chambers. These systems are promising candidates for the implementation of fusion technology, yet significant gaps remain in understanding the underlying physical processes and their implications for design. Following target ignition, a portion of the fusion energy is released as x-rays, which deposit their energy into an array of liquid jets, leading to partial vaporization. Accurately modeling this heat deposition and vaporization process remains challenging due to the complex geometries typical of (pre-conceptual) IFE chamber designs. Furthermore, the subsequent expansion of vaporized material into the chamber’s vacuum environment poses difficulties for conventional CFD methods based on continuum assumptions, which can lead to significant inaccuracies. To address some aspects of these challenges, this work introduces a ray-tracing-based methodology to map the spatial distribution of ablated material in liquid wall-protected systems. In addition, a vacuum-tracking scheme is developed to extend the applicability of an OpenFOAM-based solver to gas dynamics in rarefied environments. The proposed approach has been verified through numerical benchmarks and applied to a practical case involving the HYLIFE-II (High Yield Lithium Injection Fusion Energy) chamber. The methodology advances the modeling capabilities for liquid wall-protected IFE systems and provides valuable tools to support their design and optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1980

NASCAP modelling computations on large optics spacecraft in geosynchronous substorm environments

The NASA Charging Analyzer Program (NASCAP) is used to evaluate qualitatively the possibility of such enhanced spacecraft contamination on a conceptual version of a large satellite. The evaluation is made by computing surface voltages on the satellite due to encounters with substorm environments and then computing charged particle trajectories in the electric fields around the satellite. Particular attention is paid to the possibility of contaminants reaching a mirror surface inside a dielectric tube because this mirror represents a shielded optical surface in the satellite model used. Deposition of low energy charged particles from other parts of the spacecraft onto the mirror was found to be possible in the assumed moderate substorm environment condition. In the assumed severe substorm environment condition, however, voltage build up on the inside and edges of the dielectric tube in which the mirror is located prevents contaminants from reaching the mirror surface.

Stevens, N. J.↗
DOE OSTI2023

Microbially mediated climate feedbacks from wetland ecosystems

Wetlands are crucial nodes in the carbon cycle, emitting approximately 20% of global CH4 while also sequestering 20%–30% of all soil carbon. Both greenhouse gas fluxes and carbon storage are driven by microbial communities in wetland soils. However, these key players are often overlooked or overly simplified in current global climate models. Here, we first integrate microbial metabolisms with biological, chemical, and physical processes occurring at scales from individual microbial cells to ecosystems. This conceptual scale-bridging framework guides the development of feedback loops describing how wetland-specific climate impacts (i.e., sea level rise in estuarine wetlands, droughts and floods in inland wetlands) will affect future climate trajectories. Furthermore, these feedback loops highlight knowledge gaps that need to be addressed to develop predictive models of future climates capturing microbial contributions. We propose a roadmap connecting environmental scientific disciplines to address these knowledge gaps and improve the representation of microbial processes in climate models. Together, this paves the way to understand how microbially mediated climate feedbacks from wetlands will impact future climate change.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

Formal Verification of Safety Properties for Aerospace Systems Through Algorithms Based on Exhaustive State-Space Exploration

The Runway Safety Monitor (RSM) designed by Lockheed Martin is part of NASA's effort to reduce aviation accidents. We developed a Petri net model of the RSM protocol and used the model checking functions of our tool SMART to investigate a number of safety properties in RSM. To mitigate the impact of state-space explosion, we built a highly discretized model of the system, obtained by partitioning the monitored runway zone into a grid of smaller volumes and by considering scenarios involving only two aircraft. The model also assumes that there are no communication failures, such as bad input from radar or lack of incoming data, thus it relies on a consistent view of reality by all participants. In spite of these simplifications, we were able to expose potential problems in the RSM conceptual design. Our findings were forwarded to the design engineers, who undertook corrective action. Additionally, the results stress the efficiency attained by the new model checking algorithms implemented in SMART, and demonstrate their applicability to real-world systems. Attempts to verify RSM with NuSMV and SPIN have failed due to excessive memory consumption.

Ciardo, Gianfranco↗
NASA NTRS2006

Formal Verification of the Runway Safety Monitor

The Runway Safety Monitor (RSM) designed by Lockheed Martin is part of NASA's effort to reduce runway accidents. We developed a Petri net model of the RSM protocol and used the model checking functions of our tool SMART to investigate a number of safety properties in RSM. To mitigate the impact of state-space explosion, we built a highly discretized model of the system, obtained by partitioning the monitored runway zone into a grid of smaller volumes and by considering scenarios involving only two aircraft. The model also assumes that there are no communication failures, such as bad input from radar or lack of incoming data, thus it relies on a consistent view of reality by all participants. In spite of these simplifications, we were able to expose potential problems in the RSM conceptual design. Our findings were forwarded to the design engineers, who undertook corrective action. Additionally, the results stress the efficiency attained by the new model checking algorithms implemented in SMART, and demonstrate their applicability to real-world systems.

Siminiceanu, Radu↗
NASA NTRS1975

Modular biowaste monitoring system

The objective of the Modular Biowaste Monitoring System Program was to generate and evaluate hardware for supporting shuttle life science experimental and diagnostic programs. An initial conceptual design effort established requirements and defined an overall modular system for the collection, measurement, sampling and storage of urine and feces biowastes. This conceptual design effort was followed by the design, fabrication and performance evaluation of a flight prototype model urine collection, volume measurement and sampling capability. No operational or performance deficiencies were uncovered as a result of the performance evaluation tests.

Fogal, G. L.↗
NASA NTRS1976

Definition study for photovoltaic residential prototype system

A parametric sensitivity study and definition of the conceptual design is presented. A computer program containing the solar irradiance, solar array, and energy balance models was developed to determine the sensitivities of solar insolation and the corresponding solar array output at five sites selected for this study as well as the performance of several solar array/battery systems. A baseline electrical configuration was chosen, and three design options were recommended. The study indicates that the most sensitive parameters are the solar insolation and the inverter efficiency. The baseline PST selected is comprised of a 133 sg m solar array, 250 ampere hour battery, one to three inverters, and a full shunt regulator to limit the upper solar array voltage. A minicomputer controlled system is recommended to provide the overall control, display, and data acquisition requirements. Architectural renderings of two photovoltaic residential concepts, one above ground and the other underground, are presented. The institutional problems were defined in the areas of legal liabilities during and after installation of the PST, labor practices, building restrictions and architectural guides, and land use.

Imamura, M. S.↗
NASA NTRS1983

Building an information model (with the help of PSL/PSA)

Problem Statement Language/Problem Statement Analyzer (PSL/PSA) applications, which were once a one-step process in which product system information was immediately translated into PSL statements, have in light of experience been shown to result in inconsistent representations. These shortcomings have prompted the development of an intermediate step, designated the Product System Information Model (PSIM), which provides a basis for the mutual understanding of customer terminology and the formal, conceptual representation of that product system in a PSA data base. The PSIM is initially captured as a paper diagram, followed by formal capture in the PSL/PSA data base.

Callender, E. D.↗
NASA NTRS1988

NASA-Ames workload research program

Research has been underway for several years to develop valid and reliable measures and predictors of workload as a function of operator state, task requirements, and system resources. Although the initial focus of this research was on aeronautics, the underlying principles and methodologies are equally applicable to space, and provide a set of tools that NASA and its contractors can use to evaluate design alternatives from the perspective of the astronauts. Objectives and approach of the research program are described, as well as the resources used in conducting research and the conceptual framework around which the program evolved. Next, standardized tasks are described, in addition to predictive models and assessment techniques and their application to the space program. Finally, some of the operational applications of these tasks and measures are reviewed.

Hart, Sandra↗
NASA NTRS1991

Automation of closed environments in space for human comfort and safety

The results of the second year of a three year design project on the automation of the Environmental Control and Life Support System (ECLSS) of the Space Station Freedom (SSF) are presented. The results are applicable to other space missions that require long duration space habitats. A description of conceptual controls which are developed for the Water Recovery and Management (WRM) Subassembly is given. Mathematical modeling of the Air Revitalization (AR) Subassembly is presented. The work done by the Kansas State University NASA/USRA interdisciplinary student design team is concluded with a discussion of the expert system which was developed for the AR Subassembly.

Source record↗
NASA NTRS1993

New developments in the method of space-time conservation element and solution element: Applications to the Euler and Navier-Stokes equations

A new numerical framework for solving conservation laws is being developed. This new approach differs substantially in both concept and methodology from the well-established methods--i.e., finite difference, finite volume, finite element, and spectral methods. It is conceptually simple and designed to avoid several key limitations to the above traditional methods. An explicit model scheme for solving a simple 1-D unsteady convection-diffusion equation is constructed and used to illuminate major differences between the current method and those mentioned above. Unexpectedly, its amplification factors for the pure convection and pure diffusion cases are identical to those of the Leapfrog and the DuFort-Frankel schemes, respectively. Also, this explicit scheme and its Navier-Stokes extension have the unusual property that their stabilities are limited only by the CFL condition. Moreover, despite the fact that it does not use any flux-limiter or slope-limiter, the Navier-Stokes solver is capable of generating highly accurate shock tube solutions with shock discontinuities being resolved within one mesh interval. An accurate Euler solver also is constructed through another extension. It has many unusual properties, e.g., numerical diffusion at all mesh points can be controlled by a set of local parameters.

Chang, Sin-Chung↗
NASA NTRS2005

Parametric Inlet Tested in Glenn's 10- by 10-Foot Supersonic Wind Tunnel

The Parametric Inlet is an innovative concept for the inlet of a gas-turbine propulsion system for supersonic aircraft. The concept approaches the performance of past inlet concepts, but with less mechanical complexity, lower weight, and greater aerodynamic stability and safety. Potential applications include supersonic cruise aircraft and missiles. The Parametric Inlet uses tailored surfaces to turn the incoming supersonic flow inward toward an axis of symmetry. The terminal shock spans the opening of the subsonic diffuser leading to the engine. The external cowl area is smaller, which reduces cowl drag. The use of only external supersonic compression avoids inlet unstart--an unsafe shock instability present in previous inlet designs that use internal supersonic compression. This eliminates the need for complex mechanical systems to control unstart, which reduces weight. The conceptual design was conceived by TechLand Research, Inc. (North Olmsted, OH), which received funding through NASA s Small-Business Innovation Research program. The Boeing Company (Seattle, WA) also participated in the conceptual design. The NASA Glenn Research Center became involved starting with the preliminary design of a model for testing in Glenn s 10- by 10-Foot Supersonic Wind Tunnel (10 10 SWT). The inlet was sized for a speed of Mach 2.35 while matching requirements of an existing cold pipe used in previous inlet tests. The parametric aspects of the model included interchangeable components for different cowl lip, throat slot, and sidewall leading-edge shapes and different vortex generator configurations. Glenn researchers used computational fluid dynamics (CFD) tools for three-dimensional, turbulent flow analysis to further refine the aerodynamic design.

Slater, John W.↗
NASA NTRSDate not supplied

Sensitivity Analysis for Takeoff and Landing Distance Parameters for Regional Air Mobility (RAM) Aircraft

Takeoff and landing performance models require low-speed aerodynamic and thrust characteristics that are difficult to predict in the conceptual design stage. Although an empirical approach can be utilized to predict takeoff and landing performance, this approach is inadequate for aircraft incorporating novel technologies and design such as those proposed for regional air mobility aircraft. The focus of this paper is to understand the sensitivity of takeoff and landing distance to aerodynamic, propulsive, and other parameters of interest for regional air mobility class vehicles. The aerodynamic and propulsive characteristics are generated and modified using simplified approximations based on fundamental physics and integrated into the equations of motion to calculate takeoff and landing distances. The most impactful parameters for takeoff and landing were those related to propulsion and the lift curve. Additional impactful parameters for landing included braking coefficient, approach angle, and wing incidence. Lesser impact was observed for the parameters describing the low-speed drag polar.

Gabino Martinez Rodriguez↗