Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “commanding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

A piloted simulator investigation of augmentation systems to improve helicopter nap-of-the-earth handling qualities

A piloted simulation study assessed various levels of stability and control augmentation designed to improve the handling qualities of several helicopters in nap-of-the-earth (NOE) flight. Five basic single rotor helicopters - one teetering, two articulated, and two hingeless - which were found to have a variety of major deficiencies in a previous fixed-based simulator study were selected as baseline configurations. The stability and control augmentation systems (SCAS) include simple control augmentation systems (CAS) to decouple pitch and yaw responses due to collective input and to quicken the pitch and roll control responses; SCAS of rate command type designed to optimize the sensitivity and damping and to decouple the pitch-roll due to aircraft angular rate; and attitude command type SCAS. Pilot ratings and commentary are presented as well as performance data related to the task. SCAS control usage and their gain levels associated with specific rotor type are also discussed.

Chen, R. T. N.↗

Shuttle entry guidance

This paper describes the design of the entry guidance for the Space Shuttle Orbiter. This guidance provides the steering commands for trajectory control from initial penetration of the earth's atmosphere until the terminal area guidance is activated at an earth-relative speed of 2500 fps. At this point, the Orbiter is at a distance of about 50 nmi from the runway threshold, and at an altitude of about 80,000 ft. The entry guidance design is based on an analytic solution of the equations of motion defining the drag acceleration profile that meets the terminal criteria of the entry flight while maintaining the flight within systems and operational constraints. Guidance commands, which are based on a control law that ensures damping of oscillatory type trajectory motion, are computed to steer the Orbiter to this drag acceleration profile.

Harpold, J. C.↗

A detached experiment carrier aids adaptation of experiments from sounding rockets to Space Shuttle

The detached experiment carrier (DEC) system aids the adaptation of small, low-weight experiments to Space Shuttle missions. The carrier system consists of the detached experiment carrier (free-flyer), a command station at the Orbiter aft station, and a flight support station in the Orbiter payload bay. The carrier is a compact vehicle that is radio controlled by the Shuttle crew. It uses control television, command, and cold gas propulsion systems to deploy experiments from and later rendezvous with the Orbiter. The carrier propulsion system also maintains the attitude control required during experiment execution. Results of engineering investigation, analysis, component design and development, and testing indicate that the DEC system concept is practical. Results of preliminary engineering investigations, including maneuvering system handling qualities and television/telemetry display formats, indicate that the concept of flying the DEC 'out of' and 'into' the Orbiter payload bay is both safe and practical for small, compact free-flyer deployment and retrieval. This paper describes the carrier system, its operations, and potential applications.

Ritz, W. F.↗

Trends in the automation of planetary spacecraft

The automation of planetary spacecraft at the Jet Propulsion Laboratory (JPL) is discussed. Factors affecting the development of spacecraft automation, such as predictable and repetitive functions and narrow time-window, are analyzed. The volume of command data transmitted to the spacecraft is considered, together with an examination of 'autonomy' (executing functions without outside control) in relation to the ground command activity needed during the mission. The role of the spacecraft's growing computational power in increasing vehicle autonomy is noted.

Bird, T. H.↗

Preliminary study of pilot lateral control of two light airplanes near the stall

For two representative light, single-engine airplanes the single-axis piloting task of controlling bank angle with combined aileron and rudder, and a two-axis task of controlling bank angle with aileron and sideslip with rudder have been studied. For these tasks existing divergence criteria have been applied to determine conditions for closed-loop stability for selected flight conditions near the stall; in addition closed-loop stability characteristics and airplane response to bank angle command were calculated. Results obtained from applying the divergence criterion and from calculations of airplane responses to bank angle command indicate that aileron-alone bank angle control is marginally acceptable at high angle of attack. Of the two rudder control techniques considered, rudder used with the aileron in controlling bank angle increasd stability and produced satisfactory responses; the combined bank angle and sideslip control task does not warrant further consideration because of the task difficulty and the small improvement indicated in airplane closed-loop response with this technique.

Moul, M. T.↗

Optimal control of the Shuttle-Tethered-Subsatellite system

Alternate control laws based on an application of the linear regulator problem are developed for possible use in the operation of the Shuttle-Tethered-Subsatellite system. Control is assumed to be provided only by modulating the tension level in the tether as a function of the difference between actual and commanded tether line length, length rate, in (orbital) plane swing angle and swing angle rate. Necessary and sufficient conditions for stability of the (linear) system motion in the vicinity of its nominal local vertical orientation are developed. By proper selection of the state and control penalty matrices it is possible to obtain faster responses with no increase in maximum power levels for use in station keeping when compared with alternate control strategies. The weighting matrices are adjusted in a piecewise adaptive manner to provide control law gains in order to achieve a smooth deployment history. Successful retrieval is dependent mainly on the initial conditions and the rate at which the commanded length is reduced.

Bainum, P. M.↗

Apollo 2 Second Generation Lunar Exploration System Studies CFY 1963

The Apollo II Second Generation Lunar Exploration System includes the direct landing spacecraft which consists of cargo command module, service module, and landing module. The landing module is also capable of being used as the Lunar Landing Vehicle (LLV) for landing unmanned cargos consisting of shelter modules such as the Lunar Occupancy Payload and other cargo in support of lunar surface operations. High energy cryogenic propellants are utilized to permit direct landing, manned, or logistic missions with use of a single Saturn V class booster. In last year's studies, the LLV was configured for maximum payload and with consideration for the direct three-man landing and return mission. Light weight and low vehicle height above the lunar surface at touchdown were major objectives. Logistic cargos of more than 27,000 pounds landed on the Moon were achieved within the single Saturn V boost capability. For the manned mission, the lunar take-off weight was determined to be 28,000 pounds ready for the return-to-Earth portion of the mission. The command module utilized was an advanced light-weight design weighing 10,000 pounds including supporting subsystems. Cryogenic oxygen/hydrogen propulsion was again used for maximum propulsion efficiency. Study of the Lunar Occupancy Payload was also accomplished last year. This module was configured to serve as an early lunar shelter or outpost station or as a basic module of an integrated base module complex. Single and dual compartment versions, as well as special mission versions, were studied.

Matzenaur, J. O.↗

Computer-controlled warmup circuit

Filament of high-power radio transmitter is brought to operating temperature automatically. Pushbotton reduces operator's role to one-step command and is compatible with various forms of computer control. Filiament shutdown is initiated by "down" command from operator, failure of cooling systems, or power failure for more than few seconds.

Daeges, J. J.↗

Toggled signal for prevention of control errors

Redundant command lines use two different "true" signals to avoid common failure modes. When function is required to operate, computer generates command and transmits it to demultiplexer, where it is split along two paths, producing outputs from separate electronic cards. Outputs combine to drive AND gate high and begin function.

Wyllie, C. E.↗

Flight evaluation of configuration management system concepts during transition to the landing approach for a powered-lift STOL aircraft

Flight experiments were conducted to evaluate two control concepts for configuration management during the transition to landing approach for a powered-lift STOL aircraft. NASA Ames' augmentor wing research aircraft was used in the program. Transitions from nominal level-flight configurations at terminal area pattern speeds were conducted along straight and curved descending flightpaths. Stabilization and command augmentation for attitude and airspeed control were used in conjunction with a three-cue flight director that presented commands for pitch, roll, and throttle controls. A prototype microwave system provided landing guidance. Results of these flight experiments indicate that these configuration management concepts permit the successful performance of transitions and approaches along curved paths by powered-lift STOL aircraft. Flight director guidance was essential to accomplish the task.

Franklin, J. A.↗

Design of a nonlinear adaptive filter for suppression of shuttle pilot-induced oscillation tendencies

Analysis of a longitudinal pilot-induced oscillation (PIO) experienced just prior to touchdown on the final flight of the space shuttle's approach landing tests indicated that the source of the problem was a combination of poor basic handling qualities aggravated by time delays through the digital flight control computer and rate limiting of the elevator actuators due to high pilot gain. A nonlinear PIO suppression (PIOS) filter was designed and developed to alleviate the vehicle's PIO tendencies by reducing the gain in the command path. From analytical and simulator studies it was shown that the PIOS filter, in an adaptive fashion, can attenuate the command path gain without adding phase lag to the system. With the pitch attitude loop of a simulated shuttle model closed, the PIOS filter increased the gain margin by a factor of about two.

Smith, J. W.↗

A pilot's assessment of helicopter handling-quality factors common to both agility and instrument flying tasks

A series of simulation and flight investigations were undertaken to evaluate helicopter flying qualities and the effects of control system augmentation for nap-of-the-Earth (NOE) agility and instrument flying tasks. Handling quality factors common to both tasks were identified. Precise attitude control was determined to be a key requirement for successful accomplishment of both tasks. Factors that degraded attitude controllability were improper levels of control sensitivity and damping, and rotor system cross coupling due to helicopter angular rate and collective pitch input. Application of rate command, attitude command, and control input decouple augmentation schemes enhanced attitude control and significantly improved handling qualities for both tasks. The NOE agility and instrument flying handling quality considerations, pilot rating philosophy, and supplemental flight evaluations are also discussed.

Gerdes, R. M.↗

MCC level C formulation requirements. Shuttle TAEM guidance and flight control, STS-1 baseline

The TAEM guidance and body rotational dynamics models required for the MCC simulation of the TAEM mission phase are defined. This simulation begins at the end of the entry phase and terminates at TAEM autoland interface. The logic presented is the required configuration for the first shuttle orbital flight (STS-1). The TAEM guidance is simulated in detail. The rotational dynamics simulation is a simplified model that assumes that the commanded rotational rates can be achieved in the integration interval. Thus, the rotational dynamics simulation is essentially a simulation of the autopilot commanded rates and integration of these rates to determine orbiter attitude. The rotational dynamics simulation also includes a simulation of the speedbrake deflection. The body flap and elevon deflections are computed in the orbiter aerodynamic simulation.

Carman, G. L.↗

User's guide for the Flight Design System (FDS)

Information about the Flight Design System (FDS) in the context of flight design is presented. The guide introduces the FDS user to the structure of FDS and to constructs within FDS (such as files of information or the part of FDS which interacts directly with the user). A guide to the commands available to FDS users is presented. A glossary of important terms, an index to terms, and a quick reference to the commands of FDS are included.

Ramsey, H. R.↗

The University of Colorado OSO-8 spectrometer experiment. IV - Mission operations

The remote operation of two high-resolution ultraviolet spectrometers on the OSO-8 satellite is discussed. Mission operations enabled scientific observers to plan observations based on current solar data, interact with the observing program using real- or near real-time data and commands, evaluate quick-look instrument data, and analyze the observations for publication. During routine operations, experiments were planned a day prior to their execution, and the data from these experiments received a day later. When a shorter turnaround was required, a real-time mode was available. Here, the real-time data and command links into the remote control center were used to evaluate experiment operation and make satellite pointing or instrument configuration changes with a 1-90 minute turnaround.

Hansen, E. R.↗

Atmospheric perturbation and control of a shuttle/tethered satellite

A simplified model of the strong atmospheric perturbation of a small satellite attached to the orbiter by a long, rigid tether predicts undesirable uncontrolled libration motions similar to those from sophisticated models. The simplified model is used to compare performance limitations of two simple control systems that rely only on tether tension for three-dimensional control. Because the effects on libration of both the changing kinematic and atmospheric drag torques caused by changing length are largely predictable, the controller that models these changes has substantially better performance. In particular, the altitude variation of the tethered satellite above an oblate earth can be controlled substantially better with a controller that uses a length command adapted to these predictable changes than one that only reacts to tension changes. Also, small amplitude out-of-plane librations, that are coupled only to second-order with changing length, can be damped substantially faster by the controller that periodically commands properly phased length changes than by the controller that only reacts to the second-order changes in tension.

Spencer, T. M.↗

Spacecraft momentum management procedures

Techniques appropriate for implementation onboard the space telescope and other spacecraft to manage the accumulation of momentum in reaction wheel control systems using magnetic torquing coils are described. Generalized analytical equations are derived for momentum control laws that command the magnetic torquers. These control laws naturally fall into two main categories according to the methods used for updating the magnetic dipole command: closed loop, in which the update is based on current measurements to achieve a desired torque instantaneously, and open-loop, in which the update is based on predicted information to achieve a desired momentum at the end of a period of time. Physical interpretations of control laws in general and of the Space Telescope cross product and minimum energy control laws in particular are presented, and their merits and drawbacks are discussed. A technique for retaining the advantages of both the open-loop and the closed-loop control laws is introduced. Simulation results are presented to compare the performance of these control laws in the Space Telescope environment.

Chen, L. C.↗

A user's guide for DTIZE an interactive digitizing and graphical editing computer program

A guide for DTIZE, a two dimensional digitizing program with graphical editing capability, is presented. DTIZE provides the capability to simultaneously create and display a picture on the display screen. Data descriptions may be permanently saved in three different formats. DTIZE creates the picture graphics in the locator mode, thus inputting one coordinate each time the terminator button is pushed. Graphic input devices (GIN) are also used to select function command menu. These menu commands and the program's interactive prompting sequences provide a complete capability for creating, editing, and permanently recording a graphical picture file. DTIZE is written in FORTRAN IV language for the Tektronix 4081 graphic system utilizing the Plot 80 Distributed Graphics Library (DGL) subroutines. The Tektronix 4953/3954 Graphic Tablet with mouse, pen, or joystick are used as graphics input devices to create picture graphics.

Thomas, C. C.↗