Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coils”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Design and construction of the MUSE permanent magnet stellarator

This paper documents the design and construction of MUSE, the world's first permanent magnet (PM) stellarator and the first quasi-axisymmetric experiment. The purpose of MUSE is to develop and assess a new way of building optimised stellarators that uses simple planar coils PMs. Our PM optimisation algorithm consists of initialising a geometry to pack dipoles densely, running the FAMUS code to minimise surface field error subject to PM constraints and applying discrete jumps to reach a physically realisable solution. FAMUS treats the PM system as a set of ideal point dipoles. From there we construct finite-volume magnet towers to be housed in 3D-printed PM holders. We describe the design of the PM holders, which were validated by laser metrology. We analyse the effects of finite permeability, sensitivity to perturbations and magnetostatic forces. An exact analytic formula for the magnetic field from a finite-volume PM tower is presented to compute PM–PM forces and stress on the PM holder. Stellarator construction is complete and experiments are underway.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

An asymptotic Grad–Shafranov equation for quasisymmetric stellarators

A first-order model is derived for quasisymmetric stellarators where the vacuum field due to coils is dominant, but plasma-current-induced terms are not negligible and can contribute to magnetic differential equations, with $\beta$ of the order of the ratio induced to vacuum fields. Under these assumptions, it is proven that the aspect ratio must be large and a simple expression can be obtained for the lowest-order vacuum field. The first-order correction, which involves both vacuum and current-driven fields, is governed by a Grad–Shafranov equation and the requirement that flux surfaces exist. These two equations are not always consistent, and so this model is generally overconstrained, but special solutions exist that satisfy both equations simultaneously. One family of such solutions is the set of first-order near-axis solutions. Thus, the first-order near-axis model is a subset of the model presented here. Several other solutions outside the scope of the near-axis model are also found. A case study comparing one such solution to a VMEC-generated solution shows good agreement.

Nikulsin, Nikita (ORCID:0000000318611777)↗
DOE OSTI2023

Gas and Propane Combustion from Stoves Emits Benzene and Increases Indoor Air Pollution

Exposure pathways to the carcinogen benzene are well-established from tobacco smoke, oil and gas development, refining, gasoline pumping, and gasoline and diesel combustion. Combustion has also been linked to the formation of nitrogen dioxide, carbon monoxide, and formaldehyde indoors from gas stoves. To our knowledge, however, no research has quantified the formation of benzene indoors from gas combustion by stoves. Across 87 homes in California and Colorado, natural gas and propane combustion emitted detectable and repeatable levels of benzene that in some homes raised indoor benzene concentrations above well-established health benchmarks. Mean benzene emissions from gas and propane burners on high and ovens set to 350 °F ranged from 2.8 to 6.5 μg min –1 , 10 to 25 times higher than emissions from electric coil and radiant alternatives; neither induction stoves nor the food being cooked emitted detectable benzene. Benzene produced by gas and propane stoves also migrated throughout homes, in some cases elevating bedroom benzene concentrations above chronic health benchmarks for hours after the stove was turned off. Combustion of gas and propane from stoves may be a substantial benzene exposure pathway and can reduce indoor air quality.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Liquid–Liquid Microfluidic Flows for Ultrafast 5-Hydroxymethyl Furfural Extraction

We study the effects of liquid–liquid flow patterns on the extraction of 5-hydroxymethyl furfural from the aqueous phase into an organic phase (methyl isobutyl ketone, ethyl acetate, and 2-pentanol) at ultrashort residence times of 0.2–20 s in a coiled capillary microchannel. Slug, droplet, slug-droplet, dispersed, parallel, annular, and irregular two-phase flow patterns are generated. We evaluate the extraction efficiency and the volumetric mass transfer coefficient via experiments and computational fluid dynamics (CFD). The CFD predictions are in quantitative agreement with the experimental data. The convective and diffusive contributions to the mass transfer of different flow patterns are analyzed. For all solvent pairs, the extraction efficiency varies irregularly with increasing flow rate due to changes in the mass transfer mechanism caused by a transition between flow regimes. Overall, we demonstrate >90% extraction efficiencies with high volumetric mass transfer coefficients ranging from 0.006 to 2.17 s–1. Furthermore, a merit index is defined to assess the trade-off between the fast mass transfer and the pressure drop in biphasic microchannels. In general, the mass transfer rate increases significantly at high flow rates at the expense of a high-pressure drop. Furthermore, the ethyl acetate/water irregular flow pattern is optimal due to a large throughput, extraction efficiency, and mass transfer coefficient, with a minimal pressure drop.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Toward a Diverse Next-Generation Energy Workforce: Teaching Artificial Photosynthesis and Electrochemistry in Elementary Schools through Active Learning

Artificial photosynthesis is a promising approach to generate commodity chemicals using abundant chemical feedstocks and renewable energy sources. Despite its importance, affordable and effective hands-on classroom activities that demonstrate artificial photosynthesis and teach key concepts, especially for primary school students, are lacking. Educating young students on this topic is a critical step in the development of the next-generation energy workforce, especially one that is diverse in race and gender. Here, we hypothesize that an effective approach to educate a broad range of young students on the topic of artificial photosynthesis is through the use of an active learning-based lesson plan that employs cheap and accessible materials. This hypothesis is confirmed by evaluating the understanding of fifth grade students with a survey before and after a lesson plan on artificial photosynthesis that uses active-learning techniques and uses safe and highly accessible materials (baking soda, tap water, plastic jars, Ni coil, alligator clips, and a solar cell) to perform solar-powered water splitting. The lesson plan and survey questions are designed to align with the educational outcomes for fifth grade classrooms in California and to address four general learning objectives: (1) Motivations of Artificial Photosynthesis, (2) Applications of Artificial Photosynthesis, (3) Inputs and Outputs of Artificial Photosynthesis, and (4) Engineering Design for Artificial Photosynthesis. The survey data demonstrate a statistically significant improvement in overall student understanding from the lesson plan. Importantly, the data show that the lesson plan presented here is effective at narrowing the performance gap between minority students and overly represented groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

From Protein Design to the Energy Landscape of a Cold Unfolding Protein

Understanding protein folding is crucial for protein sciences. The conformational spaces and energy landscapes of cold (unfolded) protein states, as well as the associated transitions, are hardly explored. Furthermore, it is not known how structure relates to the cooperativity of cold transitions, if cold and heat unfolded states are thermodynamically similar, and if cold states play important roles for protein function. We created the cold unfolding 4-helix bundle DCUB1 with a de novo designed bipartite hydrophilic/hydrophobic core featuring a hydrogen bond network which extends across the bundle in order to study the relative importance of hydrophobic versus hydrophilic protein–water interactions for cold unfolding. Structural and thermodynamic characterization resulted in the discovery of a complex energy landscape for cold transitions, while the heat unfolded state is a random coil. Below ~0 °C, the core of DCUB1 disintegrates in a largely cooperative manner, while a near-native helical content is retained. The resulting cold core-unfolded state is compact and features extensive internal dynamics. Below -5 °C, two additional cold transitions are seen, that is, (i) the formation of a water-mediated, compact, and highly dynamic dimer, and (ii) the onset of cold helix unfolding decoupled from cold core unfolding. Our results suggest that cold unfolding is initiated by the intrusion of water into the hydrophilic core network and that cooperativity can be tuned by varying the number of core hydrogen bond networks. Protein design has proven to be invaluable to explore the energy landscapes of cold states and to robustly test related theories.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Scaling Theory of Neutral Sequence-Specific Polyampholytes

The primary sequence of charged monomers in a polyampholyte has a profound effect on its conformational properties. In this work, theory and simulations are used to predict how the sequence influences the single-chain behavior of globally neutral polyampholytes (PAs) under salt-free conditions. We consider PAs with Markov statistics of charges, where charge “blockiness” is defined by the correlation λ along the chain. These PAs cover a wide spectrum of primary sequences ranging from alternating (λ = –1) to ideally random (λ = 0) to diblock (λ → 1). In a theta solvent, sufficiently long PAs of any primary sequence form globules, but their internal structure, as well as the position and sharpness of the coil–globule transition, crucially depends on λ. Further, using scaling arguments, we demonstrate that the excess charge of the globule correlation volume (blob) increases with increasing λ, thereby inducing stronger Coulomb attractions between neighboring blobs of opposite charge and leading to higher density PA globules. Scaling predictions are supported by the results of the random phase approximation (RPA) and coarse-grained molecular dynamics simulations. A generalization to good and poor solvents is presented that enables the construction of the resulting scaling diagram of PA conformations in terms of solvent quality and charge blockiness, thereby providing a comprehensive molecular understanding of the role of the PA primary sequence in the chain structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

How Do Ionic Liquids “Fold” Ionenes? Computational and Experimental Analysis of Imidazolium Polymers Based on Ether and Alkyl Chain Variations Dissolved in an Ionic Liquid

Molecular dynamics (MD) simulations and complementary experiments are used here to understand the inter- and intramolecular structure and conformational properties of ionenes (i.e., cationic polymers formed from condensation reactions) dissolved in an ionic liquid (IL), 1-ethyl-3-methylimidazolium bistriflimide [C 2 mim + ][Tf 2 N - ]. The simulated structural properties are benchmarked against experimental analyses of these same polymers, mainly using dynamic light scattering (DLS) experiments. Four different imidazolium ionenes are considered, corresponding to variations in the chemistry and structure of the repeat units including: (1) poly (decylimidazolium) (PD 10 ); (2) poly (tetraethyleneglycolimidazolium) (PE 10 ); (3) alternating copolymer (P(ED) 5 ); and (4) a block copolymer (PE 5 D 5 ). Detailed computational analyses of the polymer structure and conformational properties were performed, including the radius of gyration, end-to-end distance, torsional distributions, and site-site and spatial distribution functions. Overall, there is a competition between intramolecular associations between the imidazolium groups and the ether sites in the polymers versus the intermolecular interactions of the polymer imidazolium groups with the surrounding anion molecules. The polymer with only ether linkages (PE 10 ) results in the most intramolecular interactions, leading to significant coiling behavior and chain contraction. These strong interactions reduce chain flexibility, but they also result in much more linear chain configurations and alignment of the imidazolium groups. The polymer structure is strongly affected as the concentration of alkyl groups is increased, and we find that the polymer architecture (alternating versus block copolymer) also has an important influence. Furthermore, these detailed observations are important for understanding the connection between the molecular design of imidazolium polymers and their emergent structural properties, which could lead to unique opportunities for creating polymer composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Comprehensive Dynamics in a Polyelectrolyte Complex Coacervate

The linear viscoelastic response, LVR, of a hydrated polyelectrolyte complex coacervate, PEC, was evaluated over a range of frequencies, temperatures, and salt concentrations. The PEC was a nearly stoichiometric blend of a quaternary ammonium poly([3-(methacrylamido)propyl]trimethylammonium chloride), PMAPTAC, and poly(2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt), PAMPS, an aliphatic sulfonate, selected because they remain fully charged over the conditions of use. Narrow molecular weight distribution polyelectrolytes were prepared using fractionation techniques. A partially deuterated version of PMAPTAC was incorporated to determine its coil radius of gyration, R g , within PECs using small-angle neutron scattering. Chain dimensions were determined to be Gaussian with a Kuhn length of 2.37 nm, which remained constant from 25 to 65 °C. The LVR for a series of matched molecular weight PECs, mostly above the entanglement threshold, exhibited crossovers of modulus versus frequency classically attributed to the reptation time, relaxation between entanglements, and the relaxation of a Kuhn length of units (the “monomer” time). The scaling for zero shear viscosity, η 0 , versus chain length, N, was η 0 ~ N 3.1 , in agreement with “sticky reptation” theory. The lifetime and activation energy, E p , of a pair between polyanion and polycation repeat units, Pol + Pol – , were determined from diffusion coefficients of salt ions within the PEC. The activation energy for LVR of salt-free PECs was 2E p , showing that the key mechanism limiting the dynamics of undoped PECs is pair exchange. An FTIR technique was used to distinguish whether SCN– acts as a counterion or a co-ion within PECs. Doping of PECs with NaSCN breaks Pol + Pol – pairing efficiently, which decreases effective cross-linking and decreases viscosity. Finally, an equation was derived that quantitatively predicts this effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

AC Magnetometry Using Nano-ferrofluid Cladded Multimode Interferometric Fiber Optic Sensors for Power Grid Monitoring Applications

The AC magnetic field response of the superparamagnetic nano-ferrofluid is an interplay between the Neel and Brownian relaxation processes and is generally quantified via the susceptibility measurements at high frequencies. The high frequency limit is dictated by these relaxation times which need to be shorter than the time scale of the time varying magnetic field for the nano-ferrofluid to be considered in an equilibrium state at each time instant. Even though the high frequency response of ferrofluid has been extensively investigated for frequencies up to GHz range by non-optical methods, harnessing dynamic response by optical means for AC magnetic field sensing in fiber-optic-based sensors-field remains unexplored. Instead, the incorporation of nano-ferrofluid as sensing materials has been only limited to DC magnetic field sensing, often citing their long response time as a limiting factor to AC field sensing. This work reports the finding of high frequency (up to 15 kHz) AC magnetic field sensing capability of nanomagnetic fluid as the cladding material of a fiber-optic multimode interferometry (MMI) structure optimized for the fourth self-imaging spectral response. The key parameter enabling high frequency response is the short response time (<1 ms) achieved by optimizing both the sensing structure and nano-ferrofluid solution. Focus has been imparted on 60 Hz line-frequency profiles of various current/magnetic fields to test the efficacy of these sensors in metering and monitoring current and current-induced magnetic fields in the electrical power grid systems. The magnetic field sensitivity of 240 mV/Gauss per dBm of transmitted power was achieved for 60 Hz field applied via Helmholtz coil, whereas the 60 Hz AC current sensitivity of 2.83 mV/A was measured due to magnetic field induced by current in a straight conducting wire.

42 ENGINEERING↗
DOE OSTI2025

Cooperative Role of Mixed Solvent in the Evaporation-Induced Self-Assembly of Polypeptoid Nanocrystals

Peptoids, or polypeptoids, are biomimetic polymers that can self-assemble into nanocrystals for biomedical and biotechnological applications. Polypeptoid nanocrystals can be prepared by evaporation-induced self-assembly, but the roles of solvent components for this process have long been overlooked at the molecular level, leaving a tunable parameter for improving self-assembly protocols. This work utilized molecular dynamics simulations to study the effects of water and the commonly used tetrahydrofuran (THF) on the assembly of nanosheets from molecules of acetylated diblock polypeptoid, poly-(N-decylglycine)-b-poly-(N-2-(2-(2-methoxyethoxy)-ethoxy) ethylglycine), abbreviated as Ac-Ndc10-Nte10. To probe the stages of self-assembly, isolated molecules and preassembled nanofibers/nanosheets were simulated in pure THF, water, and their mixtures, respectively. The assembly energies show that the THF/water mixture has a greater tendency to form nanosheets than pure water. In a THF/water mixture, polypeptoids were found more uncoiled in isolated states, less compact in disordered agglomerates, and with reduced requirement for the Nte block to cover hydrophobic Ndc surfaces in the nanocrystals. Mixed solvent is vital to initiating self-assembly, as THF assists in the opening of coiled polypeptoid molecules, while water provides the thermodynamics to aggregate and ultimately form nanocrystals. To obtain wider nanosheets, it is recommended that some THF be maintained in the aqueous solvent before it becomes exhausted by evaporation. Near the nanosheet surface, the THF concentration is higher than that in bulk solution (3-4 times in 4 M THF/water). The strong adsorption of THF indicates the self-assembly in a de facto mixed solvent. These results are expected to guide the refinement of evaporation-induced self-assembly protocols for polypeptoid nanocrystals.

Luo, Xubo↗
DOE OSTI2022

Variable-Temperature Scattering and Spectroscopy Characterizations for Temperature-Dependent Solution Assembly of PffBT4T-Based Conjugated Polymers

The solution structure of conjugated polymers (CPs) from which the films are cast is critical for tailoring the thin-film morphology thus device performance. Here, we used multimodal variable-temperature scattering and spectroscopy tools to fully quantify the solution assembly of poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3'''-dialkyl-2,2';5',2'';5'',2'''-quaterthiophen-5,5'''-diyl)] (PffBT4T) polymers with varying side-chain lengths at different assembly temperatures. The conformational and aggregation behaviors for PffBT4T-based CPs were found to be very sensitive to both temperature and side chain length using ultraviolet–visible (UV–vis) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). We found that with slightly increasing side chain length from 2-octyldodecyl (C8C12) to 2-nonyltridecyl (C9C13), PffBT4T-based CPs show a significant decrease in aggregation-to-dissolved chain transition temperature (10 °C), degree of aggregation, enthalpy change of aggregation, and size of the aggregates in solution. At room temperature, PffBT4T polymer strongly aggregated to form fabric structure with the film thickness of a few nanometers in thickness and hundreds of nanometers in length, as probed by atomic force microscopy (AFM), transmission electronic microscopy (TEM), and dynamic light scattering (DLS). At the elevated temperature above the aggregation-to-dissolved chain transition temperature, PffBT4T is fully dissolved and adopts a semiflexible coil conformation with the persistence length of 3.1 nm for PffBT4T-C8C12 and a slightly increased persistence length of 3.4 nm for PffBT4T-C9C13, according to temperature-dependent SANS measurements. Longer side chains of PffBT4T-C9C13 also lead to less aggregation enthalpy gain compared with PffBT4T-C8C12. This work provides a solution structure manipulating strategy of CPs and thus will inspire the molecular design and processing protocols of CPs toward higher performance electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

NMR Studies of Block Copolymer-Based Supramolecules in Solution

Hierarchical assemblies from block copolymer (BCP)-based supramolecules have shown immense potential as programmable materials owing to their versatility for incorporating functional molecules and provide access to arrays of hierarchical structures. However, there remains a knowledge gap on the formation of the supramolecule in solution. Here, we applied NMR techniques to investigate the solution-phase behavior of the most studied supramolecular systems, polystyrene-block-poly(4-vinylpyridine)(3-pentadecylphenol) (PS-b-P4VP(PDP) r ). The results show that the supramolecule likely adopts a coil-comb conformation, despite the small molecule's (PDP) rapid exchange between the bonded and free states. The exchange rate (>10 4 s -1 ) exceeds the NMR time scale at the frequency of interest. The supramolecules form under dilute conditions (~2 vol %) and are attributed to the enthalpic gain of the hydrogen bonding between the PDP and 4VP. As the solute concentration increases (>10 vol %), the supramolecule forms micelle-like aggregates with PDP accumulated within the comb-block's pervaded volume based on analysis of the apparent molecular weight, viscosity, and chain dynamics. Overall, this work sheds light on the long-standing question regarding the evolution of the constituents in the BCP-based supramolecule in solution and provides valuable guidance toward their solution-based processing and morphological control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Shear-Induced Conformations of Salt-Free Polyelectrolytes in Semidilute Solutions

Here, we present coarse-grained molecular dynamics simulations of salt-free polyelectrolyte chains in semidilute solutions under simple shear flow, with full hydrodynamic interactions and explicit dipolar solvent. At equilibrium, chain orientation statistics follow a pseudo-Voigt distribution, and the structural correlation length and chain end-to-end vector autocorrelation function exhibit scaling behavior consistent with theoretical predictions for polyelectrolytes. Under shear, chains transition from coiled to stretched states and the end-to-end vector autocorrelation function reveals oscillatory dynamics at high Weissenberg numbers. Analysis of the gyration tensor and shear strain distributions identified three distinct chain populations with directional alignment along and against the shear gradient. Compared with their neutral polymer counterparts, polyelectrolytes exhibit stronger shear thinning and enhanced chain alignment under the same Weissenberg number, which is attributed to electrostatic interactions and shear-induced counterion release. These findings provide molecular insight into the distinct flow response of charged polymers and have implications for tailoring the rheological properties of polyelectrolyte-based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Storage-Induced Collapse of Lignin Macromolecular Structure and Its Impacts on the Biorefinery

Lignin plays a vital role in the economics of biorefineries, serving as a source of process energy and a feedstock for sustainable fuels and chemical production. While understanding lignin’s chemical composition is crucial, emerging evidence suggests that a more comprehensive understanding of its macromolecular structure is critical to explaining its complex behavior in the biorefinery. This study investigated the partial collapse of the lignin network in corn stover feedstock after harvest and storage as a result of the microbial digestion of hemicellulose. Fluorescence microscopy was used to detect the collapse of lignin in terms of lignin’s inter-molecular interaction and the re-orientation of lignin’s chromophores, by the changes in lignin’s fluorescence lifetime, anisotropy, and the number of effective emitters. With minimal sample perturbation, our in-situ microscopic results revealed lignin's coil-globule transition phenomena, which was only previously predicted by molecular dynamics modeling extracted lignin in solvent. This collapse of lignin macromolecular structure was confirmed by results from NMR, IR, Raman, and powder X-ray diffraction. We also investigated the impact of this storage-induced collapse on the downstream biorefinery processes. Our study revealed that the two major approaches for lignin valorization in the lignin-first biorefinery model, namely monomer extraction and milled wood lignin extraction, were negatively impacted by the lignin collapse. As changes during storage are a source of feedstock variability, our study highlights the importance of understanding the effect of feedstock handling on biorefinery operations and economics.

09 BIOMASS FUELS↗
DOE OSTI2025

Investigation of Solid Particle Reactors for Nonoxidative Dehydrogenation of Ethane: Toward Solar Thermal Ethylene Production

Concentrating solar power plants can generate renewable heat at temperatures well above those of most industrial processes. Ceramic particles irradiated with concentrated sunlight can store high-quality sensible heat and transfer this to power generation systems. These concepts and materials hold great potential to also enable thermal processes in the chemical industry, but effective strategies for transferring heat from thermal energy storage media into chemical reactors are still under development. This present work evaluated the thermal and chemical compatibility of various solid particle media (including quartz, bauxite, and alumina particles) integrated directly into tube reactors and the subsequent effects on reactor performance for the nonoxidative dehydrogenation of ethane reaction. Empty tube reactors without loaded particles (representing conventional ethane cracking coils) showed significant heat transfer limitations as the tube diameter was scaled. The incorporation of media into the reactor significantly aided heat transfer to the gaseous ethane reactant and increased its conversion by as much as 10% at similar space velocities. Despite direct contact with hydrocarbon gases, alumina and quartz media showed negligible coke formation. Even during reaction in 100% ethane feed gas at 825 °C, the average selectivity of the coke product was only 0.57% when using the quartz media. These materials further demonstrated excellent thermal stability during subsequent reoxidation in air at 800 °C, which simulated the reheating of particles in a circulating particle solar receiver. Conversely, high rates of coke formation, with a product selectivity of 27.5%, were observed on sintered bauxite particles during the reaction, likely promoted by transition metal constituents. These particles fractured upon reoxidation due to exotherms generated from coke combustion. In conclusion, while the use of cofed steam could mitigate attrition of redox-active particles, the ability of inert metal oxide particles to efficiently transfer heat to concentrated ethane reactant gas while suppressing side reactions or degradation suggests that these media could effectively couple solar thermal plants to reactors for next-generation production of ethylene and other critical chemicals.

Hydrocarbons↗
DOE OSTI2021

Modulating the Molecular Geometry and Solution Self-Assembly of Amphiphilic Polypeptoid Block Copolymers by Side Chain Branching Pattern

Solution self-assembly of coil-crystalline diblock copolypeptoids has attracted increasing attention due to its capability to form hierarchical nanostructures with tailorable morphologies and functionalities. While the N-substituent (or side chain) structures are known to affect the crystallization of polypeptoids, their roles in dictating the hierarchical solution self-assembly of diblock copolypeptoids are not fully understood. Herein, we designed and synthesized two types of diblock copolypeptoids, i.e., poly(N-methylglycine)-b-poly(N-octylglycine) (PNMG-b-PNOG) and poly(N-methylglycine)-b-poly(N-2-ethyl-1-hexylglycine) (PNMG-b-PNEHG), to investigate the influence of N-substituent structure on the crystalline packing and hierarchical self-assembly of diblock copolypeptoids in methanol. With a linear aliphatic N-substituent, the PNOG blocks pack into a highly ordered crystalline structure with a board-like molecular geometry, resulting in the self-assembly of PNMG-b-PNOG molecules into a hierarchical microflower morphology composed of radially arranged nanoribbon subunits. By contrast, the PNEHG blocks bearing bulky branched aliphatic N-substituents are rod-like and prefer to stack into a columnar hexagonal liquid crystalline mesophase, which drives PNMG-b-PNEHG molecules to self-assemble into symmetrical hexagonal nanosheets in solution. A combination of time-dependent small/wide-angle X-ray scattering and microscopic imaging analysis further revealed the self-assembly mechanisms for the formation of these microflowers and hexagonal nanosheets. These results highlight the significant impact of the N-substituent architecture (i.e., linear versus branched) on the supramolecular self-assembly of diblock copolypeptoids in solution, which can serve as an effective strategy to tune the geometry and hierarchical structure of polypeptoid-based nanomaterials.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Sequence Programmable Order–Disorder Transitions in Supramolecular Assembly of Peptide Nanofibers

Protein–protein interactions determine the assembly of complexes that are responsible for numerous key biological processes. The assembly of many natural protein complexes is mediated by post-translational structural changes and environmental stimuli. In this study, we show that incorporation of adjacent lysine residues results in the pH-tunable stability of peptide secondary structure and assembly, allowing for the incorporation of complementary order-inducing motifs. The strategic placement of cysteine pairs in the same peptide sequence results in redox-dependent disulfide staple formation, inducing a transition from random coil to β-sheet conformation and subsequent supramolecular nanofiber assembly from otherwise disordered peptide monomers. Spectroscopic, imaging, molecular dynamics, and kinetic studies highlight the critical role of sequence motif location, oligomerization, and the competitive interplay between intra- and interpeptide disulfide bonding in determining assembly outcomes. We extend this approach to demonstrate phosphorylation-dependent assembly from the design of the same parent peptide sequence, suggesting a general approach to the design of diverse stimulus-responsive peptide sequences for supramolecular assembly. Furthermore, these findings also provide a framework for investigating sequence-dependent pathways in amyloid fiber formation with potential implications for neurodegenerative disease research.

Disulfides↗