Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Liquid Water Oceans in Ice Giants

Aptly named, ice giants such as Uranus and Neptune contain significant amounts of water. While this water cannot be present near the cloud tops, it must be abundant in the deep interior. We investigate the likelihood of a liquid water ocean existing in the hydrogen-rich region between the cloud tops and deep interior. Starting from an assumed temperature at a given upper tropospheric pressure (the photosphere), we follow a moist adiabat downward. The mixing ratio of water to hydrogen in the gas phase is small in the photosphere and increases with depth. The mixing ratio in the condensed phase is near unity in the photosphere and decreases with depth; this gives two possible outcomes. If at some pressure level the mixing ratio of water in the gas phase is equal to that in the deep interior, then that level is the cloud base. The gas below the cloud base has constant mixing ratio. Alternately, if the mixing ratio of water in the condensed phase reaches that in the deep interior, then the surface of a liquid ocean will occur. Below this ocean surface, the mixing ratio of water will be constant. A cloud base occurs when the photospheric temperature is high. For a family of ice giants with different photospheric temperatures, the cooler ice giants will have warmer cloud bases. For an ice giant with a cool enough photospheric temperature, the cloud base will exist at the critical temperature. For still cooler ice giants, ocean surfaces will result. A high mixing ratio of water in the deep interior favors a liquid ocean. We find that Neptune is both too warm (photospheric temperature too high) and too dry (mixing ratio of water in the deep interior too low) for liquid oceans to exist at present. To have a liquid ocean, Neptune s deep interior water to gas ratio would have to be higher than current models allow, and the density at 19 kbar would have to be approx. equal to 0.8 g/cu cm. Such a high density is inconsistent with gravitational data obtained during the Voyager flyby. In our model, Neptune s water cloud base occurs around 660 K and 11 kbar, and the density there is consistent with Voyager gravitational data. As Neptune cools, the probability of a liquid ocean increases. Extrasolar "hot Neptunes," which presumably migrate inward toward their parent stars, cannot harbor liquid water oceans unless they have lost almost all of the hydrogen and helium from their deep interiors.

Wiktorowicz, Sloane J.↗

Evolution of titanium particle combustion in potassium perchlorate and air

Understanding titanium particle combustion processes is critical not only for characterizing existing pyrotechnic systems but also for creating new igniter designs. In order to characterize titanium particle combustion processes, morphologies, and temperatures, simultaneous spatially-resolved electric field holography and imaging pyrometry techniques were used to capture post-ignition data at up to 7 kHz. Due to the phase and thermal distortions present in the combustion cloud, traditional digital in-line holography techniques fail to capture accurate data. Here in this work, electric field holography techniques are used in order to cancel distortions and capture the three-dimensional spatial locations and diameters of the particles. In order to estimate the projected surface temperatures of the titanium particles, an imaging pyrometry method that ratios emission at 750 and 850 nm is utilized. Using these diagnostics, joint statistics are collected for particle size, morphology, velocity, and temperature. Results show that, early in the combustion process, the titanium particles are primarily oxidized by potassium perchlorate inside the igniter cup, resulting in projected surface temperatures near 3000 K. Later in the process, the particles interact with ambient air, resulting in lower surface temperatures around 2400 K and the formation of flame zones. These results are consistent with adiabatic flame temperature predictions as well as particle morphology observations of a titanium core with a TiO 2 surface. Late stage particle expansion, star fragmentation, and molten droplet breakup events are also observed using the time-resolved morphology and temperature diagnostics. These results illustrate the different stages of titanium particle combustion in pyrotechnic environments, which can be used to inform improvements in next-generation igniters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precipitation Probability and Its Future Changes From a Global Cloud-Resolving Model and CMIP6 Simulations

This study investigates precipitation probability and its future changes using simulations from the Non-hydrostatic Icosahedral Atmospheric Model (NICAM), a global cloud-resolving model, and Coupled Model Intercomparison Project Phase 6 (CMIP6) models. For the precipitation probability comparison between models and Tropical Rainfall Measuring Mission (TRMM) during 1998–2008, the difference is greatly reduced by regridding to a common coarser resolution, but the difference signs largely remain. Both NICAM and CMIP6 model ensemble mean show less global-mean nonprecipitation fractions than observations, but NICAM agrees better with observations. For global-mean light precipitation probability, NICAM (CMIP6 model ensemble mean) is smaller (larger) than TRMM. NICAM shows higher heavy precipitation probability than TRMM in native resolutions, but it is close to TRMM and falls in the CMIP6 model range after regridding. For the precipitation probability changes from 1979–2008 to 2075–2104, NICAM predicts an increase in nonprecipitation and extreme heavy (>100 mm/day) precipitation probability but a slight decrease in the probability for precipitation <100 mm/day. After regridding to 2.5°, the precipitation intensity where the probability starts to increase becomes ~20 mm/day and the relative increases in nonprecipitation and heavy precipitation probability become much larger. Future heavy precipitation probability relative increases from CMIP6 models are much larger than NICAM at their native resolutions, but NICAM falls in the CMIP6 model range after regridding, indicating robust future increase (decrease) in heavy (light) precipitation probability regardless of underlying convection treatments. Discrepancy, however, exists in the projected nonprecipitation fraction changes: NICAM shows that nonprecipitation probability will increase over most of low and middle latitudes where CMIP6 models show less increases and even decreases.

54 ENVIRONMENTAL SCIENCES↗

Synchrotron radiation and diffusive shock acceleration - A short review and GRB perspective

In this talk we present the sponge” model and its possible implications on the GRB afterglow light curves. “Sponge” model describes source of GRB afterglow radiation as fragmented GRB ejecta where bubbles move through the rarefied medium. In the first part of the talk a short introduction to synchrotron radiation and Fermi acceleration was presented. In the assumption that X-ray luminosity of GRB afterglow phase comes from the kinetic energy losses of clouds in ejecta medium radiated as synchrotron radiation we solved currently very simple equation of motion to find which combination of cloud and medium regime describes the afterglow light curve the best. We proposed for the first step to watch simple combinations of expansion regimes for both bubbles and surrounding medium. The closest case to the numerical fit of GRB 150403A with time power law index k = 1.38 is the combination of constant bubbles and Sedov like expanding medium with time power law index k = 1.25. Of course the question of possible mixture of variuos regime combinations is still open within this model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experiment and model for a Stokes layer in a strongly coupled dusty plasma

A Stokes layer, which is a flow pattern that arises in a viscous fluid adjacent to an oscillatory boundary, was observed in an experiment using a two-dimensional strongly coupled dusty plasma. Liquid conditions were maintained using laser heating, while a separate laser manipulation applied an oscillatory shear that was localized and sinusoidal. The evolution of the resulting flow was analyzed using space-time diagrams. These figures provide an intuitive visualization of a Stokes layer, including features such as the depth of penetration and wavelength. Another feature, the characteristic speed for the penetration of the oscillatory flow, also appears prominently in space-time diagrams. To model the experiment, the Maxwell-fluid model of a Stokes layer was generalized to describe a two-phase liquid. In our experiment, the phases were gas and dust, where the dust cloud was viscoelastic due to strong Coulomb coupling. Furthermore, the model is found to agree with the experiment, in the appearance of the space-time diagrams, and in the values of the characteristic speed, depth of penetration, and wavelength.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Review of Aerosol–Cloud Interactions: Mechanisms, Significance, and Challenges

Over the past decade, the number of studies that investigate aerosol-cloud interactions has increased considerably. Although tremendous progress has been made to improve our understanding of basic physical mechanisms of aerosol-cloud interactions and reduce their uncertainties in climate forcing, we are still in poor understanding of (1) some of the mechanisms that interact with each other over multiple spatial and temporal scales, (2) the feedback between microphysical and dynamical processes and between local-scale processes and large-scale circulations, and (3) the significance of cloud-aerosol interactions on weather systems as well as regional and global climate. This review focuses on recent theoretical studies and important mechanisms on aerosol-cloud interactions, and discusses the significances of aerosol impacts on raditative forcing and precipitation extremes associated with different cloud systems. Despite significant understanding has been gained about aerosol impacts on the main cloud types, there are still many unknowns especially associated with various deep convective systems. Therefore, large efforts are needed to escalate our understanding. Future directions should focus on obtaining concurrent measurements of aerosol properties, cloud microphysical and dynamic properties over a range of temporal and spatial scales collected over typical climate regimes and closure studies, as well as improving understanding and parameterizations of cloud microphysics such as ice nucleation, mixed-phase properties, and hydrometeor size and fall speed

Fan, Jiwen↗

Tracking the distribution of {sup 26}Al and {sup 60}Fe during the early phases of star and disk evolution

The short-lived {sup 26}Al and {sup 60}Fe radionuclides are synthesized and expelled into the interstellar medium by core-collapse supernova events. The solar system’s first solids, calcium–aluminum refractory inclusions (CAIs), contain evidence for the former presence of the {sup 26} Al nuclide defining the canonical {sup 26}Al/{sup 27} Al ratio of ∼5×10{sup −5}. A different class of objects temporally related to canonical CAIs are CAIs with fractionation and unidentified nuclear effects (FUN CAIs), which record a low initial {sup 26}Al/{sup 27}Al of 10{sup −6}. The contrasting level of {sup 26}Al between these objects is often interpreted as reflecting the admixing of the {sup 26}Al nuclides during the early formative phase of the Sun. We use giant molecular cloud scale adaptive mesh-refinement numerical simulations to trace the abundance of {sup 26}Al and {sup 60}Fe in star-forming gas during the early stages of accretion of individual low-mass protostars. We find that the {sup 26}Al/{sup 27}Al and {sup 60}Fe/{sup 56}Fe ratios of accreting gas within a vicinity of 1000 au of the stars follow the predicted decay curves of the initial abundances at the time of star formation without evidence of spatial or temporal heterogeneities for the first 100 kyr of star formation. Therefore, the observed differences in {sup 26}Al/{sup 27}Al ratios between FUN and canonical CAIs are likely not caused by admixing of supernova material during the early evolution of the proto-Sun. Selective thermal processing of dust grains is a more viable scenario to account for the heterogeneity in {sup 26}Al/{sup 27}Al ratios at the time of solar system formation.

79 ASTRONOMY AND ASTROPHYSICS↗

minimpl (b1)

The micropulse lidar (MPL) is a ground-based, optical, remote-sensing system designed primarily to determine the altitude of clouds; however, it is also used for detection of atmospheric aerosols. The physical principle is the same as for radar. Pulses of energy are transmitted into the atmosphere; the energy scattered back to the transceiver is collected and measured as a time-resolved signal, thereby detecting clouds and aerosols in real time. From the time delay between each outgoing pulse and the backscattered signal, the distance to the scatterer is inferred. Post-processing of the lidar return characterizes the extent and properties of aerosols or other particles in a region.

54 ENVIRONMENTAL SCIENCES↗

Calculations of the effects of angular momentum on the early evolution of Jupiter

Early phases in the evolutionary development of a rotating cloud of gas and dust are investigated to determine whether physically reasonable initial conditions are likely to produce a planet-satellite system with the values of specific orbital angular momentum currently observed for Jupiter and its inner satellites. Spherically symmetric computations of Jupiter's evolutionary history are reviewed, and transport of angular momentum is considered along with evolutionary sequences of individual differentially rotating models with decreasing values of equatorial radius. The problem of accounting for the present specific orbital angular momenta of Jupiter and its regular satellites is examined qualitatively, and a range of possible angular-momentum distributions in an initially tidally unstable cloud is assessed. The results show that particular physically plausible angular-momentum distributions, which could either be established as initial conditions or be caused by angular-momentum transport, will lead to favorable situations for the formation of a central planet and a surrounding rotating cloud with specific angular momentum comparable to that of the regular satellites.

Bodenheimer, P.↗

Protostellar formation in rotating interstellar clouds. III - Nonaxisymmetric collapse

The paper discusses a full three spatial-dimension gravitational hydrodynamic code used to follow the collapse of isothermal rotating clouds subjected to various nonaxially symmetric perturbations (NAP). An initially axially symmetric cloud collapsed to form a ring which then fragmented into a binary protostellar system; a low thermal energy cloud with a large bar-shaped NAP collapsed and fragmented into a binary, and higher thermal energy clouds damp out such NAPs while higher rotational energy clouds produce binaries with wider separations. The three-dimensional calculations indicate that isothermal interstellar clouds may fragment into protostellar objects while still in the isothermal regime. Interstellar clouds and their fragments may pass through collapse phases with fragmentation and reduction of spin angular momentum terminating in the formation of pre-main-sequence stars with the observed pre-main-sequence rotation rates.

Boss, A. P.↗

Calculations concerning the reaction C + H3(+) - CH(+) + H2

The ion-molecule reaction of C + H3(+) - CH(+) + H2 has not been studied in the laboratory but is thought to be important in the gas phase synthesis of organic molecules in dense interstellar clouds. This reaction was studied theoretically by performing quantum chemical ab initio calculations on the potential surface. It is found that there is no activation barrier to the reaction and that it proceeds smoothly to the first excited electronic state of CH(+). The rate coefficient as a function of temperature can then be estimated using the proper long-range potentials. The rate coefficient at 10 K is calculated to be 2.9 x 10 to the -9th cu cm/sec.

Talbi, D.↗

Gravitational influence on eutectic solidification

The effect of gravity on eutectic solidification was investigated experimentally for Pb-Sn binary eutectic alloys. It is found that the separation of the primary crystals of the binary system from the coupled eutectic occurs over a wide range of cooling rates and gravitational fields (100-100,000 g). The separation is strongly influenced by the nucleation behavior of the particular alloy system. A mechanism for the strong phase separation is postulated on the basis of cloud convection models in atmospheric convection.

Sokolowski, Robert S.↗

Collapse and fragmentation of molecular cloud cores. I - Moderately centrally condensed cores

3D calculations of the collapse of moderately centrally condensed molecular cloud cores with varied thermal and rotational energies are presented. The calculations are carried out using a newly developed and tested second-order accurate radiative hydrodynamics code. Because of the use of a second-order accurate numerical scheme and initial clouds that resemble both observed prolate molecular cloud cores and magnetically supported clouds at the initiation of the dynamic collapse phase, the new models provide a superior estimate of the likelihood of fragmentation as a mechanism for binary star formation.

Boss, Alan P.↗

Early phases of LMC star clusters?

On the basis of optical and IUE observations we have investigated the possibility that some of the very young stellar systems of the LMC, such as SL360, may be regarded as globular clusters at the very early phases of their dynamical evolution after the gas cloud expulsion.

Kontizas, Evangelos↗

Theory of Dust Voids in Plasmas

Dusty plasmas in a gas discharge often feature a stable void, i.e., a dust-free region inside the dust cloud. This occurs under conditions relevant to both plasma processing discharges and plasma crystal experiments. The void results from a balance of the electrostatic and ion drag forces on a dust particle. The ion drag force is driven by a flow of ions outward from an ionization source and toward the surrounding dust cloud, which has a negative space charge. In equilibrium the force balance for dust particles requires that the boundary with the dust cloud be sharp, provided that the particles are cold and monodispersive. Numerical solutions of the one-dimensional nonlinear fluid equations are carried out including dust charging and dust-neutral collisions, but not ion-neutral collisions. The regions of parameter space that allow stable void equilibria are identified. There is a minimum ionization rate that can sustain a void. Spatial profiles of plasma parameters in the void are reported. In the absence of ion-neutral collisions, the ion flow enters the dust cloud's edge at Mach number M = 1. Phase diagrams for expanding or contracting voids reveal a stationary point corresponding to a single stable equilibrium void size, provided the ionization rate is constant. Large voids contract and small voids expand until they attain this stationary void size. On the other hand, if the ionization rate is not constant, the void size can oscillate. Results are compared to recent laboratory and microgravity experiments.

Goree, J.↗

Lightning and Precipitation: Observational Analysis of LIS and PR

Lightning flash rate can identify areas of convective rainfall when the storms are dominated by ice-phase precipitation. Modeling and observational studies indicate that cloud electrification and microphysics are very closely related and it is of great interest to understand the relationship between lightning and cloud microphysical quantities. Analyzing data from the Lightning Image Sensor (LIS) and the Precipitation Radar (PR), we show a quantitative relationship between microphysical characteristics of thunderclouds and lightning flash rate. We have performed a complete analysis of all data available over the Mediterranean during the TRMM mission and show a range of reflective profiles as a function of lightning activity for both convective and stratiform regimes as well as seasonal variations. Due to the increasing global coverage of lightning detection networks, this kind of study can used to extend the knowledge about thunderstorms and discriminate between different regimes in regions where radar measurements are readilly available.

Adamo, C.↗

Sport Transition of JPSS VIIRS Imagery for Night-time Applications

The NASA/Short‐term Prediction, Research, and Transition (SPoRT) Program and NOAA/Cooperative Institute for Research in the Atmosphere (CIRA) work within the NOAA/Joint Polar Satellite System (JPSS) Proving Ground to demonstrate the unique capabilities of the VIIRS instrument. Very similar to MODIS, the VIIRS instrument provides many high‐resolution visible and infrared channels in a broad spectrum. In addition, VIIRS is equipped with a low‐light sensor that is able to detect light emissions from the land and atmosphere as well as reflected sunlight by the lunar surface. This band is referred to as the Day‐Night Band due to the sunlight being used at night to see cloud and topographic features just as one would typically see in day‐time visible imagery. NWS forecast offices that collaborate with SPoRT and CIRA have utilized MODIS imagery in operations, but have longed for more frequent passes of polar‐orbiting data. The VIIRS instrument enhances SPoRT collaborations with WFOs by providing another day and night‐time pass, and at times two additional passes due to its large swath width. This means that multi‐spectral, RGB imagery composites are more readily available to prepare users for their use in GOES‐R era and high‐resolution imagery for use in high‐latitudes is more frequently able to supplement standard GOES imagery within the SPoRT Hybrid GEO‐LEO product. The transition of VIIRS also introduces the new Day‐Night Band capability to forecast operations. An Intensive Evaluation Period (IEP) was conducted in Summer 2013 with a group of "Front Range" NWS offices related to VIIRS night‐time imagery. VIIRS single‐channel imagery is able to better analyze the specific location of fire hotspots and other land features, as well as provide a more true measurement of various cloud and aerosol properties than geostationary measurements, especially at night. Viewed within the SPoRT Hybrid imagery, the VIIRS data allows forecasters to better interpret the more frequent, but coarse GOES Imagery. Night‐time Microphysics and Dust RGB Imagery provides cloud analysis of cloud height, thickness, and composition in order for operational applications such as separating fog from low clouds, dust plume detection, and determining precipitating clouds in radar-void/ blocked regions. The Day‐Night Band has a particular benefit to seeing light from cities, fires, or other emissions as well as the reflection of moonlight off of clouds and smoke plumes, given the right lunar phase and angle. Examples from the VIIRS transition and IEP will be presented.

Fuell, Kevin↗