Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “circular”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Rigorous solutions for sound radiation from circular ducts with hyperbolic horns or infinite plane baffle

A rigorous treatment is presented of sound radiation from circular ducts with either a hyperbolic horn or an infinite plane baffle. In the analysis hyperboloidal wave functions are used, which are defined here, for the first time, as a class of eigensolutions of the wave equation for oblate spheroidal co-ordinates. The numerical results include the complex conversion (or reflection) coefficients and the radiation directivity for various incident wave modes, spinning modes as well as axisymmetric modes. The solutions are valid for the whole frequency range including frequencies above and below the cut-off frequencies of the duct modes involved.

Cho, Y. C.↗
NASA NTRS1980

A visual investigation of turbulence in stagnation flow about a circular cylinder

A diagnostic visualization study of turbulence in stagnation flow around a circular cylinder was carried out to gain physical insight into the coherent structure of turbulence in flow around a bluff body advanced by the vorticity-amplification theory. The visualization was conducted at a cylinder-diameter Reynolds number of 8000 utilizing titanium dioxide white smoke for an approaching flow containing turbulence at scales larger than the neutral wavelength of the stagnation flow. Analyses of the flow events focused on tracing out the temporal and spatial evolution of a cross-vortex tube outlined by the entrained smoke filaments from its emergence near the stagnation zone through its penetration into the cylinder boundary layer.

Sadeh, W. Z.↗
NASA NTRS1980

Green's function for a crack emanating from a circular hole in an infinite sheet

Stress-intensity factors, K/I/ and K/II/, are obtained for a point loaded crack emanating from a circular hole in an infinite plate. A series approach and the Muskhelishvili formulation in the two-dimensional theory of elasticity are used to derive the solution. The applicability of the solution is demonstrated by using it as a Green's function to obtain K/I/ and K/II/ and the case of (1) biaxial tension of an infinite plate and (2) bending of a wide strip.

Shivakumar, V.↗
NASA NTRS1980

Periodic orbits of the asteroidal type in the circular restricted three-body problem

Periodic orbits of the asteroidal type in the circular restricted problem are studied by varying the period of the infinitesimal body (asteroid) and the mass ratio of the primaries (Sun-Jupiter mass ratio). The results indicate that asteroidal periodic orbits can exist for the actual Sun-Jupiter mass ratio for resonances of the Hecuba (2:1), Hilda (3:2) and Thule (4:3) groups, but not for resonances of higher consecutive integer ratios. It is also found that an asteroid can be placed in a periodic orbit at a position with mean motion between 2:1 and 3:2 even if Jupiter is about 9 times more massive than its actual value. However, an asteroid cannot be placed in a periodic orbit beyond the 4:3 resonance for the actual Sun-Jupiter mass ratio.

Kwok, J. H.↗
NASA NTRS1979

The mechanics of vortex pairing in a circular jet under controlled excitation

The vortex pairing phenomenon in the near field circular jet under controlled excitation is monitored by the method of phase-averaging. Hot-wire measurements were made in a 7.62 cm diameter air at Re(D) = 32,000, excited at St(D) = 0.85 with an excitation amplitude of 3%. The trajectories of the vortex centers and their longitudinal and transverse convection velocities during the pairing program are measured. Spatial distributions of the average velocity, vorticity, coherent Reynolds numbers, streamlines and pseudo-streamfunction are presented at a particular phase of the pairing. These represent field measurements at one particular time and do not involve the use of Taylor hypothesis.

Zaman, K. B. M. Q.↗
NASA NTRS1981

Surface geometry of circular cut spiral bevel gears

The tooth surface principal radii of curvature of crown (flat) gears were determined. Specific results are presented for involute, straight, and hyperbolic cutter profiles. It is shown that the geometry of circular cut spiral bevel gears is somewhat simpler than a theoretical logarithmic spiral bevel gear.

Huston, R. L.↗
NASA NTRS1981

Flaw criticality of circular disbond defects in compressive laminates

The compressive behavior of T300/5208 graphite-epoxy laminates containing circular delaminations was studied to determine the flaw criticality of two types of implanted defect, Kapton bag and Teflon film, on several laminate configurations. Defect size was varied. Results, presented in the form of residual strength curves, indicate that the Teflon film defect reduced strength more than the Kapton bad defect in 12-ply samples, but that two laminates (+ or - 45) sub 2s and (90/+ or - 45) sub s were insensitive to any implanted defect. A clear thickness effect was shown to exist for the (o/+ pr 45) sub ns laminate and was attributed to failure mode transition. The analytically predicted buckling loads show excellent agreement with experimental results and are useful in predicting failure mode transition.

Webster, J. D.↗
NASA NTRS1981

A modal separation measurement technique for broadband noise propagating inside circular ducts

A measurement technique which separates broadband noise propagating inside circular ducts into the acoustic duct modes is developed. The technique is also applicable to discrete frequency noise. The acoustic modes are produced by weighted combinations of the instantaneous outputs of microphones spaced around the duct circumference. The technique is compared with the cross spectral density approach presently available and found to have certain advantages, and disadvantages. Considerable simplification of both the new technique and the cross spectral density approach occurs when no correlation exists between different circumferential mode orders. The properties leading to uncorrelated modes and experimental tests which verify this condition are discussed. The modal measurement technique is applied to the case of broadband noise generated by flow through a coaxial obstruction (nozzle or orifice) in a pipe. Different circumferential mode orders are shown to be uncorrelated for this type of noise source.

Kerschen, E. J.↗
NASA NTRS1981

Correct generalized solar radiation pressure force on a circular cylinder in an arbitrary orientation

In response to the inconsistency seen in Geogevic (1973) with respect to the solution for solar radiation pressure in the case of a circular cylinder, a succinct derivation of the correct solution is presented. Numerical comparisons of the two sets of results confirm that the new formulation yields physically reasonable results for both general and special cases. A detailed graphic representation of the mathematical model used is included.

Tang, C. C. H.↗
NASA NTRS1981

Optimal transfer between close near-circular orbits

A nonlinear analysis is carried out for the optimal transfer between close near-circular noncoplanar orbits with no limit on time. The degeneracy of the linear analyses of Marec and Edelbaum is, thereby, removed and with the aid of a generalized Jacobi test, it is established that the minimum-impulse transfer requires, at most, three impulses. A field of extremals is generated in an orbit element space starting with the initial state and anticipated adjoint variables and integrating these variables by using the optimal thrust control law that maximizes the variational Hamiltonian. The nonoptimality of any four-impulse strategy is determined numerically by observing the reflection of every extremal from either an envelope (conjugate point test) or a switching surface on or before the application of the fourth impulse. This test is carried out in Regions I, II, and III of Marec, as well as the special transition region of Breakwell near the boundary of Region III.

Kechichian, J.↗
NASA NTRS1950

Penetration of Air Jets Issuing from Circular, Square, and Elliptical Orifices Directed Perpendicularly to an Air Stream

An experimental investigation was conducted to determine the penetration of air jets d.irected perpendicularlY to an air stream. Jets Issuing from circular, square, and. elliptical orifices were investigated. and. the jet penetration at a position downstream of the orifice was determined- as a function of jet density, jet velocity, air-stream d.enaity, air-stream velocity, effective jet diameter, and. orifice flow coeffIcient. The jet penetrations were determined for nearly constant values of air-stream density at three tunnel-air velocities arid for a large range of Jet velocities and. densities. The results were correlated in terms of dimensionless parameters and the penetrations of the various shapes were compared. Greater penetration was obtained. with the square orifices and the elliptical orifices having an axis ratio of 4:1 at low tunnel-air velocities and low jet pressures than for the other orifices investigated. The square orifices gave the best penetrations at the higher values of tunnel-air velocity and jet total pressure.

Ruggeri, Robert S.↗
NASA NTRS1982

Mode Propagation in Nonuniform Circular Ducts with Potential Flow

A previously reported closed form solution is expanded to determine effects of isentropic mean flow on mode propagation in a slowly converging-diverging duct, a circular cosh duct. On the assumption of uniform steady fluid density, the mean flow increases the power transmission coefficient. The increase is directly related to the increase of the cutoff ratio at the duct throat. With the negligible transverse gradients of the steady fluid variables, the conversion from one mode to another is negligible, and the power transmission coefficient remains unchanged with the mean flow direction reversed. With a proper choice of frequency parameter, many different modes can be made subject to a single value of the power transmission loss. A systematic method to include the effects of the gradients of the steady fluid variables is also described.

Cho, Y. C.↗
NASA NTRS1982

Pressure losses and heat transfer in non-circular channels with hydraulically smooth walls

The influence of channel geometry on pressure losses and heat transfer in noncircular channels with hydraulically smooth walls was studied. As a basic assumption for the description of this influence, integral geometrical criteria, selected according to experimental experience, were introduced. Using these geometrical criteria, a large set of experimental data for pressure losses and heat transfer in circular and annular channels with longitudinal fins was evaluated. In this way it as empirically proved that the criteria described channel geometry fairly well.

Malak, J.↗
NASA NTRS1981

The axisymmetric elasticity problem for a laminated plate containing a circular hole

The elasticity problem for a laminated thick plate which consists of two bonded dissimilar layers and which contains a circular hole is considered. The problem is formulated for arbitrary axisymmetric tractions on the hole surface by using the Love strain function. Through the expansion of the boundary conditions into Fourier series the problem is reduced to an infinite system of algebraic equations which is solved by the method of reduction. Of particular interest in the problem are the stresses along the interface as they relate to the question of delamination failure of the composite plate. These stresses are calculated and are observed to become unbounded at the hole boundary. An approximate treatment of the singular behavior of the stress state is presented and the stress intensity factors are calculated.

Delale, F.↗
NASA NTRS1982

Three-dimensional analysis of 0/90s and 90/0s laminates with a central circular hole

Stress distributions were calculated near a circular hole in laminates, using a three dimensional finite element analysis. These stress distributions were presented three ways: through the thickness at the hole boundary, along radial lines at the 0/90 and 90/0 interfaces, and around the hole at these interfaces. The interlaminar normal stress, and the shear stress, distributions had very steep gradients near the hole boundary, suggesting interlaminar stress singularities. The largest compressive stress occurred at about 60 deg from the load axis. A simple procedure was introduced to calculate interlaminar stresses near the hole boundary. It used stresses calculated by an exact two dimensional analysis of a laminate with a hole as input to a quasi three dimensional model. It produced stresses that agreed closely with those from the three dimensional finite element model.

Raju, I. S.↗
NASA NTRS1982

Tooth profile analysiis of circular-cut, spiral-bevel gears

An analysis of tooth profile changes in the transverse plane of circular-cut, spiral-bevel crown gears is presented. The analysis assumes a straight-line profile in the mid-transverse plane. The profile variation along the centerline is determined by using expressions for the variation of the spiral angle along the tooth centerline, together with the profile description at the mid-transverse plane. It is shown that the tooth surface is a hyperboloid and that significant variations in the pressure angle are possible.

Huston, R. L.↗