Enhancing Long;#8208;Term Thermal Stability of Non;#8208;Fullerene Organic Solar Cells Using Self;#8
Explore the source record for details and available documents.
Su, Li‐Yun↗
SEARCH · Engineering Papers
Results for “cell morphology”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte
By increasing the charging voltage, a cell specific energy of >400 Wh kg-1 is in principle achievable with LiNi0.8Mn0.1Co0.1O2 in lithium-metal batteries (LMBs). However, stable cycling of high-nickel cathodes at ultra-high voltages is extremely challenging. Here we report that a rationally designed sulfonamide-based electrolyte enables stable cycling of commercial LiNi0.8Co0.1Mn0.1O2 with a cut-off voltage up to 4.7 V in LMBs. In contrast to commercial carbonate electrolytes, the electrolyte not only suppresses side reactions, intergranular cracking, transition-metal dissolution, and impedance growth on the cathode side, but also enables highly reversible Li metal stripping and plating leading to compact morphology and low pulverization. Our LMB delivers a specific capacity >230 mAh g-1 and an average Coulombic efficiency >99.65% over 100 cycles. Even under harsh testing conditions, the 4.7 V LMB can retain >88% capacity for 90 cycles, demonstrating significant advances in practical LMBs.
36 MATERIALS SCIENCE↗
Molecular-Level Exploration of the Structure-Function Relations Underlying Interfacial Charge Transfer in the Subphthalocyanine/C 60 Organic Photovoltaic System
The arrangement of organic molecules at the donor-acceptor interface in an organic photovoltaic (OPV) cell can have a strong effect on the generation of charge carriers and thereby cell performance. In this paper, we report the molecular-level exploration of the ensemble of interfacial donor-acceptor pair geometries and the charge-transfer (CT) rates to which they give rise. Our approach combines molecular-dynamics simulations, electronic structure calculations, machine learning, and rate theory. This approach is applied to the boron subphthalocyanine chloride (donor) and C 60 (acceptor) OPV system. In this work we find that the interface is dominated by a previously unreported donor-acceptor pair edge geometry, which contributes significantly to device performance in a manner that depends on the initial conditions. Quantitative relations between the morphology and CT rates are established, which can be used to advance the design of more efficient OPV devices.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Sol-Gel Synthesis of La(0.6)Sr(0.4)CoO(3-x) and Sm(0.5)Sr(0.5)CoO(3-x) Cathode Nanopowders for Solid Oxide Fuel Cells
Nanopowders of La(0.6)Sr(0.4)CoO(3-x) (LSC) and Sm(0.5)Sr(0.5)CoO(3-x) (SSC) compositions, which are being investigated as cathode materials for intermediate temperature solid oxide fuel cells (IT-SOFC) with La(Sr)Ga(Mg)O(3-x) (LSGM) as the electrolyte, were synthesized by low-temperature sol-gel method using metal nitrates and citric acid. Thermal decomposition of the citrate gels was followed by simultaneous DSC/TGA methods. Development of phases in the gels, on heat treatments at various temperatures, was monitored by x-ray diffraction. Solgel powders calcined at 550 to 1000 C consisted of a number of phases. Single perovskite phase La(0.6)Sr(0.4)CoO(3-x) or Sm(0.5)Sr(0.5)CoO(3-x) powders were obtained at 1200 and 1300 C, respectively. Morphological analysis of the powders calcined at various temperatures was done by scanning electron microscopy. The average particle size of the powders was approx.15 nm after 700 C calcinations and slowly increased to 70 to 100 nm after heat treatments at 1300 to 1400 C.
Bansal, Narottam P.↗
Predictive coarse-grained (CG) modeling of morphologies in polymer nanocomposites with specific and directional intermolecular interactions (Final Report)
The overarching goal of the proposed work was to develop predictive models for investigating structure and dynamics in soft materials with chemistries that have specific and directional molecular interactions. The motivation behind studying materials with specific and directional interactions lies in the many desirable features these interactions provide when designing novel soft materials. Soft materials with specific and direction interactions (such as hydrogen bonds or H-bonds) can have a) thermally reversible phase behavior with different functions with varying temperature, b) precisely tuned nanostructure with desirable geometries that afford unique physical properties (e.g., color response, mechanical properties) and c) well-mixed/blended morphologies that are useful for variety of applications in energy field (e.g., materials for batteries require use of blended polymers where one domain gives superior mechanical properties and one domain promotes electrical conduction). Notably, biology makes extensive use of specific and directional interactions, in many cases based on H-bonds, to construct materials with precisely defined architectures and properties. Engineered soft materials with precisely tuned nanostructures and improved processiblity through thermoresponsive phase behavior are useful in numerous applications that are relevant to the Department of Energy (DOE) including high efficiency electronic devices, light-weight high-strength composite materials for batteries and fuel cells, and polymer membranes for separations, etc. While past computational studies have been tremendously useful in understanding molecular phenomena and guiding synthesis of new macromolecular soft materials for a wide variety of applications, the inability to capture small scale specific and directional interactions alongside macromolecular length and time scales represented a key limitation of most studies to date. Our work in this project addressed this grand challenge in computational materials chemistry, i.e., ability to model the anisotropic, directional, and specific interactions that govern the behavior of many macromolecular soft matter systems of interest, thus, has greatly expanded the predictive potential of simulations. Specifically the key outcomes were: successful development of new coarse-grained (CG) polymer models to study generic and specific polymer chemistries in which hydrogen-bonding interactions are dominant. These CG models were then used in molecular simulations to study structure and thermodynamics in polymer nanocomposites and blends; some studies were conducted in collaboration with experimentalists. We also published a perspective and a viewpoint which included some of the work we completed in this DOE project; we believe these perspective and viewpoint articles guide other researchers in the soft materials community on how to extend the computational approaches and models we have developed for the purposes of their studies.
36 MATERIALS SCIENCE↗
Sequence, molecular properties, and chromosomal mapping of mouse lumican
PURPOSE. Lumican is a major proteoglycan of vertebrate cornea. This study characterizes mouse lumican, its molecular form, cDNA sequence, and chromosomal localization. METHODS. Lumican sequence was determined from cDNA clones selected from a mouse corneal cDNA expression library using a bovine lumican cDNA probe. Tissue expression and size of lumican mRNA were determined using Northern hybridization. Glycosidase digestion followed by Western blot analysis provided characterization of molecular properties of purified mouse corneal lumican. Chromosomal mapping of the lumican gene (Lcn) used Southern hybridization of a panel of genomic DNAs from an interspecific murine backcross. RESULTS. Mouse lumican is a 338-amino acid protein with high-sequence identity to bovine and chicken lumican proteins. The N-terminus of the lumican protein contains consensus sequences for tyrosine sulfation. A 1.9-kb lumican mRNA is present in cornea and several other tissues. Antibody against bovine lumican reacted with recombinant mouse lumican expressed in Escherichia coli and also detected high molecular weight proteoglycans in extracts of mouse cornea. Keratanase digestion of corneal proteoglycans released lumican protein, demonstrating the presence of sulfated keratan sulfate chains on mouse corneal lumican in vivo. The lumican gene (Lcn) was mapped to the distal region of mouse chromosome 10. The Lcn map site is in the region of a previously identified developmental mutant, eye blebs, affecting corneal morphology. CONCLUSIONS. This study demonstrates sulfated keratan sulfate proteoglycan in mouse cornea and describes the tools (antibodies and cDNA) necessary to investigate the functional role of this important corneal molecule using naturally occurring and induced mutants of the murine lumican gene.
NASA Discipline Cell Biology↗
Nanotomography Investigation of 3D Printed Batteries with a Water-in-Salt Gel Polymer Electrolyte
3D printing, also known as additive manufacturing, has emerged as a promising strategy to design and fabricate future energy storage devices. Although significant progress has been reported, current 3D printed battery designs are still limited by the choice of the electrolyte, such as ceramic or conventional toxic organic electrolytes. Here, we incorporated the latest developments in aqueous batteries into a novel 3D printable battery that can be fabricated directly in an ambient environment that is also more environmentally friendly. Specifically, a gel polymer electrolyte with a water-in-salt concept was introduced in our 3D-printed batteries. Combining their advantages, the resulting 3D printable batteries show promise for much simplified processing conditions. Further, the structural, (electro-)chemical, and morphological evolution batteries are being investigated by synchrotron X-ray nanotomography and electrochemical analysis. Overall, our research explores the possibility of an easier and more environmentally friendly way to build 3D printable, customizable batteries for future technologies.
36 MATERIALS SCIENCE↗
Two-Dimensional Siloxene Nanosheets: Understanding the Effect of Heat Treatment on the Surface Chemistry and Resulting Electrochemistry in Lithium-Based Batteries
Two-dimensional (2D) silicon materials are conceptually appealing as negative electrode materials in lithium-ion batteries due to their layered morphology, which can accommodate (de)lithiation-induced volume changes. Herein, heat treatment of 2D Siloxene materials was used to modify the surface functional groups to determine the impact on the electrochemical behavior. Spectroscopic characterization of the heat-treated nanosheets confirmed the loss of oxygenated and hydride surface functional groups with an increased annealing temperature. Formation and disproportionation of the amorphous suboxides with increasing heat treatment were affirmed with lab and synchrotron-based measurements. A reduced irreversible capacity was observed for Siloxene with a higher temperature heat treatment consistent with the formation of a more favorable surface electrolyte interphase (SEI). A Siloxene-400||NMC622 full cell (prepared with 400 °C-annealed Siloxene (Siloxene-400) and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622)) showed significantly enhanced capacity and rate capability compared to a nano Si||NMC622 cell. Finally, these results illustrate the ability of thermal annealing to modify the surface functional groups of Siloxene and highlight the favorable impact of the appropriate surface functionality on the electrochemistry of Siloxene in lithium cells.
25 ENERGY STORAGE↗
Elucidating the mechanism underlying the augmented capacity of MoO 2 as an anode material in Li-ion batteries
Transition-metal oxide anode materials have been observed to possess an intriguing surplus of capacity beyond the expected values based on conversion reaction. However, the mechanisms behind this phenomenon have remained contentious and elusive. Here, this study focuses on synthesized nanosized molybdenum dioxide and its electrochemical performance as an anode material for Li-ion batteries. Our findings reveal a substantial increase in capacity upon cycling, achieving approximately 1688 mA h g -1 , nearly double the theoretical capacity, after 700 cycles at a 1C rate. To elucidate the mechanisms underlying this augmented capacity, a comprehensive analysis employing in situ and ex situ X-ray diffraction, X-ray absorption spectroscopy, scanning electron microscopy, and transmission electron microscopy was conducted at various stages of the Li-ion cell cycling. Our results indicate that no conversion reaction occurs during the initial discharge phase, with Li 2 O and Mo remaining undetected. Instead, Li 0.98 MoO 2 is generated upon lithiation. Further materials characterization employing electron energy loss spectroscopy and energy-dispersive X-ray spectroscopy on the cycled electrode suggests the potential formation of a metallic Li-rich layer at the interface of the Li-ion intercalated phase subsequent to the formation of Li 0.98 MoO 2 , contributing to the surplus Li storage. Moreover, electrochemical impedance spectroscopy coupled with ex situ SEM and TEM analyses reveals that alterations in particle size and morphology, along with changes in the solid electrolyte interphase (SEI) resistance, are instrumental in the capacity variation observed upon cycling.
25 ENERGY STORAGE↗
A molecular dynamics simulation study of thermal conductivity anisotropy in β-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (β-HMX)
Molecular dynamics (MD) simulations were used to predict the thermal conductivity of β-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (β-HMX) along directions normal to the (011), (110), and (010) crystal planes. These directions were selected based on the measured morphological importance of the corresponding crystal surfaces. A reverse non-equilibrium MD approach was used wherein a constant heat flux is imposed along a prescribed direction and the resulting steady-state temperature gradient determined. The coefficient of thermal conductivity λ is the quotient of heat flux and temperature gradient (i.e. Fourier's law). Finite-size effects and sensitivity to imposed heat flux were investigated. The results reveal a modest dependence of the conductivity on crystal orientation, significant finite-size effects, and low sensitivity to imposed flux so long as the Fourier's law analysis is limited to the spatial interval in the simulation cell for which the temperature gradient is constant. Infinite-length thermal conductivities were estimated by linear regression of λ -1 (L) versus reciprocal cell length L -1 for each direction. The predicted values are systematically larger, but within a factor of two, than most published experimental determinations, the latter of which were obtained for pressed-powder or composite samples rather than oriented single crystals.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Alumina – Stabilized SEI and CEI in Potassium Metal Batteries
Aluminum oxide (Al 2 O 3 ) nanopowder is spin-coated onto both sides of commercial polypropene separator to create artificial solid-electrolyte interphase (SEI) and artificial cathode electrolyte interface (CEI) in potassium metal batteries (KMBs). Here, this significantly enhances the stability, including of KMBs with Prussian Blue (PB) cathodes. For example, symmetric cells are stable after 1,000 cycles at 0.5 mA/cm 2 –0.5 mAh/cm 2 and 3.0 mA/cm 2 –0.5 mAh/cm 2 . Alumina modified separators promote electrolyte wetting and increase ionic conductivity (0.59 vs. 0.2 mS/cm) and transference number (0.81 vs. 0.23). Cryo-stage focused ion beam (cryo-FIB) analysis of cycled modified anode demonstrates dense and planar electrodeposits, versus unmodified baseline consisting of metal filaments (dendrites) interspersed with pores and SEI. Alumina-modified CEI also suppresses elemental Fe crossover and reduces cathode cracking. Mesoscale modeling of metal – SEI interactions captures crucial role of intrinsic heterogeneities, illustrating how artificial SEI affects reaction current distribution, conductivity and morphological stability.
25 ENERGY STORAGE↗
3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries
Abstract Silicon oxide (SiO x ) is a promising anode candidate of lithium‐ion batteries (LIBs) owing to its extremely high specific capacity. However, the low initial Coulombic efficiency (ICE) and rapid capacity degradation of SiO x , triggered by the enormous volume variation upon repeated (de)lithiation, gravely hinder its practical use. Herein, two mass‐produced micro‐sized SiO x @C composites with obviously different morphologies for commercial LIBs are reported. Particularly, the SiO x ‐graphite blended anode (SiO x @3D‐G‐Gr) based on SiO x wrapped by three‐dimensional (3D) carbon layers (SiO x @3D‐G) exhibits a capacity of 519 mAh g −1 , an ICE of 90.0 % and a capacity retention of 83.4 % at 0.2 C over 100 cycles. which is far exceeding its counterpart SiO x @C‐H‐Gr (65.7 %). The obtained impressive properties of SiO x @3D‐G originate from the critical contribution of 3D carbon layers, which serves as the effective stress buffer and protective layer as well as the strong networks for electron/Li + transport. Accordingly, the full‐cell based on SiO x @3D‐G‐Gr anode and commercial LiCoO 2 cathode delivers a capacity of 803 mAh and an excellent capacity retention of 95.6 % (616 mAh, 96.6 % for graphite, respectively) at 1 C over 100 cycles with a stabilized CE of nearly 100 %. The micro‐sized SiO x @3D‐G showing a promising prospect in the commercial‐grade anodes in LIBs.
Electrochemistry↗
Mechanistic assessment of tolerance to iron deficiency mediated by Trichoderma harzianum in soybean roots
Abstract Aims Iron (Fe) deficiency in soil is a continuing problem for soybean (Glycine max L.) production, partly as a result of continuing climate change. This study elucidates how Trichoderma harzianum strain T22 (TH) mitigates growth retardation associated with Fe-deficiency in a highly sensitive soybean cultivar. Methods and Results Soil TH supplementation led to mycelial colonization and the presence of UAOX1 gene in roots that caused substantial improvement in chlorophyll score, photosynthetic efficiency and morphological parameters, indicating a positive influence on soybean health. Although rhizosphere acidification was found to be a common feature of Fe-deficient soybean, the upregulation of Fe-reductase activity (GmFRO2) and total phenol secretion were two of the mechanisms that substantially increased the Fe availability by TH. Heat-killed TH applied to soil caused no improvement in photosynthetic attributes and Fe-reductase activity, confirming the active role of TH in mitigating Fe-deficiency. Consistent increases in tissue Fe content and increased Fe-transporter (GmIRT1, GmNRAMP2a, GmNRAMP2b and GmNRAMP7) mRNA levels in roots following TH supplementation were observed only under Fe-deprivation. Root cell death, electrolyte leakage, superoxide (O2•–) and hydrogen peroxide (H2O2) substantially declined due to TH in Fe-deprived plants. Further, the elevation of citrate and malate concentration along with the expression of citrate synthase (GmCs) and malate synthase (GmMs) caused by TH suggest improved chelation of Fe in Fe-deficient plants. Results also suggest that TH has a role in triggering antioxidant defence by increasing the activity of glutathione reductase (GR) along with elevated S-metabolites (glutathione and methionine) to stabilize redox status under Fe-deficiency. Conclusions TH increases the availability and mobilization of Fe by inducing Fe-uptake pathways, which appears to help provide resistance to oxidative stress associated with Fe-shortage in soybean. Significance and Impact of the Study These findings indicate that while Fe deficiency does not affect the rate or degree of TH hyphal association in soybean roots, the beneficial effects of TH alone may be Fe deficiency-dependent.
59 BASIC BIOLOGICAL SCIENCES↗
Combustion Synthesis of Sm0.5Sr0.5CoO3-x and La0.6Sr0.4CoO3-x Nanopowders for Solid Oxide Fuel Cell Cathodes
Nanopowders of Sm0.5Sr0.5CoO(3-x) (SSC) and La0.6Sr0.4CoO(3-x) (LSC) compositions, which are being investigated as cathode materials for intermediate temperature solid oxide fuel cells, were synthesized by a solution-combustion method using metal nitrates and glycine as fuel. Development of crystalline phases in the as-synthesized powders after heat treatments at various temperatures was monitored by x-ray diffraction. Perovskite phase in LSC formed more readily than in SSC. Single phase perovskites were obtained after heat treatment of the combustion synthesized LSC and SSC powders at 1000 and 1200 C, respectively. The as-synthesized powders had an average particle size of ~12 nm as determined from x-ray line broadening analysis using the Scherrer equation. Average grain size of the powders increased with increase in calcination temperature. Morphological analysis of the powders calcined at various temperatures was done by scanning electron microscopy.
Bansal, Narottam P.↗
Modelling and Experimental Validation of Improved Performance of Lithium-Ion Batteries Having Thick Electrodes with Laser-Ablated Micro-Structures
For widespread adoption of electric vehicles, lithium-ion batteries (LiBs) need to achieve energy densities of >275 Wh/kg, cost less than $100/Wh, and charge to more than 80% capacity within 15 minutes. Increasing the battery electrode thicknesses is one way to increase cell energy densities while also saving on cell manufacturing cost by increasing the ratio of electrode active material to inactive material within each cell. However, increased electrode loading is often accompanied by decreased Li+-ion diffusion across the full thick electrodes. This leads to significant cell polarization that prevents full capacity utilization and accelerates cell degradation, especially at fast charging/discharging rates. The introduction of secondary pore networks in thick battery electrodes alleviates some of the trade-offs between energy and power performance. These microstructures provide low tortuosity pathways for facile Li+-ion diffusion deep into the thick electrodes, diminishing detrimental concentration gradients within the cell. Ultrafast-pulsed laser ablation is a promising method to introduce micro pores or channels in thick battery electrodes as it allows for precise control of pattern geometries, results in minimal damage to the electrode and can be introduced into existing roll-to-roll electrode manufacturing lines. Herein, the limitations of thick planer electrodes and the advanced predictive models to identify optimal electrode patterns for improved cycling performance will be presented. The impact of electrode laser patterning to create secondary pore networks also will be discussed. Materials characterization techniques (SEM-EDS, XRD) were used to explore the affect ultrafast laser ablation had on the electrode materials’ morphology and structure. The improvements in the patterned electrodes’ electrochemical cycling performances and degrees of wetting will be compared to a pristine baseline case. Finally, the discrepancies between experimentally obtained data and model predictions will be explained.
DIRECT ENERGY CONVERSION,ENERGY STORAGE↗
Data from TropiRoot 1.0 database: tropical root characteristics across environments
TropiRoot 1.0 is a new tropical root database with root characteristics across environment gradients. It has data extracted from 104 new sources, resulting in more than 8000 rows of data (either species or community data). Most of the data in TropiRoot 1.0 includes root characteristics such as root biomass, morphology, root dynamics, mass fraction, architecture, anatomy, physiology and root chemistry. This initiative represents an approximately 30% increase in the currently available data for tropical roots in the Fine Root Ecology Database (FRED). TropiRoot 1.0, contains root characteristics from 25 different countries where seven are located in Asia, six in South America, five in Central America and the Caribbean, four in Africa, two in North America, and 1 in Oceania. Due to the volume of data, when ancillary data was available, including soil data, these data was either extracted and included in the database or their availability was recorded in an additional column. Multiple contributors checked the entries for outliers during the collation process to ensure data quality. For text-based observations, we examined all cells to ensure that their content relates to their specific categories. For numerical observations, we ordered each numerical value from least to greatest and plotted the values, checking apparent outliers against the data in their respective sources and correcting or removing incorrect or impossible values. Some data (soil and aboveground) have different columns for the same variable presented in different units, including originally published units, but root characteristics data had units converted to match the ones reported in FRED. By filling a gap from global databases, TropiRoot 1.0 expands our knowledge of otherwise so far underrepresented regions, and our ability to assess global trends. This advancement can be used to improve tropical forest representation in vegetation models.
54 ENVIRONMENTAL SCIENCES↗
Effects of microgravity on vestibular ontogeny: direct physiological and anatomical measurements following space flight (STS-29)
Does space flight change gravity receptor development? The present study measured vestibular form and function in birds flown as embryos for 5 days in earth orbit (STS-29). No major changes in vestibular gross morphology were found. Vestibular response mean amplitudes and latencies were unaffected by space flight. However, the results of measuring vestibular thresholds were mixed and abnormal responses in 3 of the 8 flight animals raise important questions.
NASA Discipline Neuroscience↗
Anthradithiophene (ADT)-Based Polymerized Non-Fullerene Acceptors for All-Polymer Solar Cells
Realizing efficient all-polymer solar cell (APSC) acceptors typically involves increased building block synthetic complexity, hence potentially unscalable syntheses and/or prohibitive costs. Here we report the synthesis, characterization, and implementation in APSCs of three new polymer acceptors P1–P3 using a scalable donor fragment, bis(2-octyldodecyl)anthra[1,2-b : 5,6-b’]dithiophene-4,10-dicarboxylate (ADT) co-polymerized with the high-efficiency acceptor units, NDI, Y6, and IDIC. Further, all three copolymers have comparable photophysics to known polymers; however, APSCs fabricated by blending P1, P2 and P3 with donor polymers PM5 and PM6 exhibit modest power conversion efficiencies (PCEs), with the champion P2-based APSC achieving PCE=5.64 %. Detailed morphological and microstructural analysis by AFM and GIWAXS reveal a non-optimal APSC active layer morphology, which suppresses charge transport. Despite the modest efficiencies, these APSCs demonstrate the feasibility of using ADT as a scalable and inexpensive electron rich/donor building block for APSCs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗