Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “capillary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Experiments on annular liquid jet instability and on the formation of liquid shells

An annular jet flow of liquid surrounding a flow of gas at its core is extremely unstable. Experiments are described in which such a flow is generated by an annular nozzle operated at fairly specific conditions. It is shown that periodic, axisymmetric oscillations arise spontaneously within the cylindrical sheet emerging from the nozzle and grow with such rapidity along the axial dimension that a sealing-off and encapsulation of the core gas occurs within a few jet diameters. This is closely followed by a pinchoff of the liquid between adjacent bubbles. The liquid shells set free thereby assume spherically symmetric form under capillary forces, and each contains a precisely uniform measure of gas and of liquid on account of the extremely high frequency-stability of the process. Description is given of the fluid dynamic processes by which the shells are formed, and mention is made of exploiting the instability for the production of rigid shells for technological applications.

Kendall, J. M.↗
NASA NTRS1987

Design Principles for Nickel/Hydrogen Cells and Batteries

Individual-pressure-vessel (IPV) nickel/hydrogen cells and bipolar batteries developed for use as energy-storage subsystems for satelite applications. Design principles applied draw upon extensive background in separator technology, alkaline-fuel-cell technology and several alkaline-cell technology areas. Principals are rather straightforward applications of capillary-force formalisms, coupled with slowly developing data base resulting from careful post-test analyses. Based on preconceived assumptions relative to how devices work and how to be designed so they display longer cycle lives at deep discharge.

Thaller, Lawrence H.↗
NASA NTRS1986

The 1- to 4-K refrigeration techniques for cooling masers on a beam waveguide antenna

The status of technology is reported for various 1- to 4-K commercially available refrigeration systems capable of producing 1.5-K refrigeration to cool masers and superconducting cavity oscillators on the proposed beam waveguide antenna. The design requirements for the refrigeration system and the cryostat are presented. A continuously operating evaporation refrigerator that uses capillary tubing to provide a continuous, self-regulating flow of helium at approximately 1.5 K has been selected as the first refrigerator design for the beam waveguide antenna.

Johnson, D. L.↗
NASA NTRS1986

The mathematical modeling of rapid solidification processing

The detailed formulation of and the results obtained from a continuum mechanics-based mathematical model of the planar flow melt spinning (PFMS) rapid solidification system are presented and discussed. The numerical algorithm proposed is capable of computing the cooling and freezing rates as well as the fluid flow and capillary phenomena which take place inside the molten puddle formed in the PFMS process. The FORTRAN listings of some of the most useful computer programs and a collection of appendices describing the basic equations used for the modeling are included.

Gutierrez-Miravete, E.↗
NASA NTRS1986

Investigation of a repetitive pulsed electrothermal thruster

A pulsed electrothermal (PET) thruster with 1000:1 ratio nozzle is tested in a repetitive mode on water propellant. The thruster is driven by a 60J pulse forming network at repetition rates up to 10 Hz (600W). The pulse forming network has a .31 ohm impedance, well matched to the capillary discharge resistance of .40 ohm, and is directly coupled to the thruster electrodes without a switch. The discharge is initiated by high voltage breakdown, typically at 2500V, through the water vapor in the interelectrode gap. Water is injected as a jet through a .37 mm orifice on the thruster axis. Thruster voltage, current and impulse bit are recorded for several seconds at various power supply currents. Thruster to power ratio is typically T/P = .07 N/kW. Tank background pressure precludes direct measurement of exhaust velocity which is inferred from calculated pressure and temperature in the discharge to be about 14 km/sec. Efficiency, based on this velocity and measured T/P is .54 + or - .07. Thruster ablation is zero at the throat and becomes measurable further upstream, indicating that radiative ablation is occurring late in the pulse.

Burton, R. L.↗
NASA NTRS1987

Pumped two-phase heat transfer loop

A pumped loop two-phase heat transfer system, operating at a nearly constant temperature throughout, includes a plurality of independently operating grooved capillary heat exchanger plates supplied with working fluid through independent flow modulation valves connected to a liquid supply line, a vapor line for collecting vapor from the heat exchangers, a condenser between the vapor and the liquid lines, and a fluid circulating pump between the condenser and the heat exchangers.

Edelstein, Fred↗
NASA NTRS1987

Effect of structure on current and potential distributions in porous electrode

Porous electrodes generally contain constricted macropores and localized micropores. The effects of the macropore constrictions on the resistance of a capillary were studied and an analytical model was developed for predicting the current distribution in a constricted macropore which directly includes constriction effects and does not require an empirical tortuosity parameter. The current and concentration distributions in localized micropores were also investigated and it was shown that the microporous area is fully accessible to charge and mass transfer processes. From these analyses it was concluded that the micropores primarily affect the kinetics of the interfacial processes by contributing to the interfacial area, while the macropores impose ohmic and mass transport limitations through the volume of the porous electrode.

Lanzi, Oscar↗
NASA NTRS1987

Velocity selection in the symmetric model of dendritic crystal growth

An analytic solution of the problem of velocity selection in a fully nonlocal model of dendritic crystal growth is presented. The analysis uses a WKB technique to derive and evaluate a solvability condition for the existence of steady-state needle-like solidification fronts in the limit of small under-cooling Delta. For the two-dimensional symmetric model with a capillary anisotropy of strength alpha, it is found that the velocity is proportional to (Delta to the 4th) times (alpha exp 7/4). The application of the method in three dimensions is also described.

Barbieri, Angelo↗
NASA NTRS1986

Equilibrium fluid interfaces in the absence of gravity

Mathematical properties of capillary surfaces under zero gravity conditions are examined in the framework of the Laplace-Young theory, considering the equilibrium interface between a liquid and a gas or between two immiscible liquids for a cylindrical container of general cross section. The predicted liquid surface behavior is compared with the results obtained in a drop-tower experiment in the Zero-G Facility at the NASA Lewis Research Center.

Concus, P.↗
NASA NTRS1985

Surface-tension-driven flow in a glass melt

Motion driven by surface tension gradients was observed in a vertical capillary liquid bridge geometry in a sodium borate melt. The surface tension gradients were introduced by maintaining a temperature gradient on the free melt surface. The flow velocities at the free surface of the melt, which were measured using a tracer technique, were found to be proportional to the applied temperature difference and inversely proportional to the melt viscosity. The experimentally observed velocities were in reasonable accord with predictions from a theoretical model of the system.

Mcneil, Thomas J.↗
NASA NTRS1987

Radar scattering and equilibrium ranges in wind-generated waves with application to scatterometry

To provide theoretical basis for the connection between observed radar scattering and wind-generated waves, a model for the response of surface waves in the gravity-capillary equilibrium region of the spectrum is proposed on the basis of a local (in wavenumber) balance between wind input and dissipation. The wind input function was constructed on the basis of laboratory observations of short-wave growth, while the dissipation function was developed from ideas of viscous dissipation and wave breaking in response to local accelerations and modified by kinematic effects of phase and group velocity differences. The model was exercised at L, C, X, and Ka bands to demonstrate the differences in wind speed and water temperature sensitivity.

Donelan, Mark A.↗
NASA NTRS1988

Wicks For Refrigerants In Heat Pipes

Ultra-high-molecular-weight material compatible with efficient heat-transfer fluids. New wick material for heat pipes first physically and chemically compatible with chlorofluoromethanes, chlorofluoroethanes, and ammonia. Allows one of these refrigerants to be used as working fluid in capillary-pump heat-pipe loop for cooling electronic equipment.

Seidenberg, Benjamin↗
NASA NTRS1988

GAS eleven node thermal model (GEM)

The Eleven Node Thermal Model (GEM) of the Get Away Special (GAS) container was originally developed based on the results of thermal tests of the GAS container. The model was then used in the thermal analysis and design of several NASA/GSFC GAS experiments, including the Flight Verification Payload, the Ultraviolet Experiment, and the Capillary Pumped Loop. The model description details the five cu ft container both with and without an insulated end cap. Mass specific heat values are also given so that transient analyses can be performed. A sample problem for each configuration is included as well so that GEM users can verify their computations. The model can be run on most personal computers with a thermal analyzer solution routine.

Butler, Dan↗
NASA NTRS1987

The respiratory system under weightlessness

Studies of pulmonary functions at rest to be studied on Spacelab mission D-2 are introduced. Gravity dependence of the distribution of ventilation (single breath washout, multibreath washout-washin); chest wall shape and motion; and the vascular compartment (lung blood flow, capillary volume, liquid content, diffusive capacity) are discussed.

Paiva, M.↗
NASA NTRS1988

Pumped two-phase heat transfer loop

A pumped loop two-phase heat transfer system, operating at a nearly constant temperature throughout, includes several independently operating grooved capillary heat exchanger plates supplied with working fluid through independent flow modulation valves connected to a liquid supply line, a vapor line for collecting vapor from the heat exchangers, a condenser between the vapor and the liquid lines, and a fluid circulating pump between the condenser and the heat exchangers.

Edelstein, Fred↗
NASA NTRS1988

Dendritic growth in the presence of convection

The motion of the freezing front between a dendritic crystal and a supercooled liquid is studied using an interface evolution equation derived from a boundary integral transformation of the transient convective-diffusion equation. A new steady-state theory is introduced that incorporates the effects of convection in dendritic growth. It is shown that in the absence of capillary effects the shape of the crystal-melt interface is a paraboloid of revolution, similar to that found in situations where diffusion is the sole heat transfer mechanism. A relation between the supercooling, the product of the tip velocity and tip radius, and the strength of the flow is derived which reduces to the well-known Ivantsov theory in the absence of convection. A non-linear interface-tracking algorithm is developed and used to study the temporal and spatial evolution of the dendritic interface. The important role of capillarity and convection on the interface dynamics is established and the response of the interface to finite amplitude disturbances is examined for the first time. Tip splitting is identified as the dominant destabilization mechanism in the limit of zero surface tension. Finite surface tension leads to interface stabilization, irrespective of the magnitude and structure of the external perturbations. Finally, convection significantly decreases the magnitude of the freezing velocity.

Beaghton, Pantelis John↗
NASA NTRS1988

Decomposition of hydrazine by high frequency glow electrical discharges

Originally, de Groot et al. examined electrical conductivity phenomena in terms of the thermodynamics of irreversible processes. They considered the system to be discontinuous and calculated only the differences between the opposing ends of the process. Thus these theories are phenomenological. In the present work, thermodynamics is developed as a continuous system based on hydrodynamics and the entropy production for a thin capillary. It is shown that electroconductivity can be interpreted without difficulty. For the electric double layer, the effects of electrolytes and surface conductivity and the gap width were calculated for the Gouy model.

Suzuki, M.↗
NASA NTRS1987

Gravitational haemodynamics and oedema prevention in the giraffe

The question of how giraffes avoid pooling of blood and tissue fluid (edema) in dependent tissues of their extremities is addressed. As monitored by radiotelemetry, the blood and tissue fluid pressures that govern transcapillary exchange vary greatly with exercise. These pressures, combined with a tight skin layer, move fluid upward against gravity. The skin thus functions like a natural antigravity suit. Other mechanisms that prevent edema include precapillary vasoconstriction and low permeability of capillaries to plasma proteins.

Hargens, Alan R.↗