Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Stabilizing Li–S Battery Through Multilayer Encapsulation of Sulfur

Abstract Advancements in portable electronic devices and electric powered transportation has drawn more attention to high energy density batteries, especially lithium–sulfur batteries due to the low cost of sulfur and its high energy density. However, the lithium–sulfur battery is still quite far from commercialization mostly because of incompatibility between all major components of the battery—the cathode, anode, and electrolyte. Here a methodology is demonstrated that shows promise in significantly improving battery stability by multilayer encapsulation of sulfur particles, while using conventional electrolytes, which allows a long cycle life and an improved Coulombic efficiency battery at low electrolyte feeding. The multilayer encapsulated sulfur battery demonstrates a Coulombic efficiency as high as 98%, when a binder‐free electrode is used. It is also shown that the all‐out self‐discharge of the cell after 168 h can be reduced from 34% in the regular sulfur battery to less than 9% in the battery with the multilayer encapsulated sulfur electrode.

Ansari, Younes↗

Autonomous Strategies for Improved Performance and Reliability of Li‐Ion Batteries

Abstract The battery community has devoted significant effort to improve the performance and reliability of Li‐ion batteries through the development of new materials. The integration of autonomous function provides an alternative strategy to further extend performance. Autonomous material systems mimic the ability of biological systems to self‐protect, sense, regulate, and heal in response to damage and other environmental changes. When incorporated in batteries, these materials enable autonomic restoration of battery performance upon degradation, as well as autonomic shutdown or extinguishment in response to thermal runaway. Successful strategies for improving Li‐ion battery performance include controlled release of microencapsulated functional additives and the integration of self‐healing or adaptive interlayers and binders. These methods have been effective for stabilizing the solid electrolyte interface, preventing battery fires, restoring electrode conductivity, and suppressing Li dendrite growth. Challenges and opportunities exist in the further application of autonomous strategies in the battery environment. A greater variety of encapsulated additives with precise triggered‐release are needed to address specific battery degradation mechanisms. Incorporation of self‐healing polymers in solid‐state batteries facilitates improvement in interfacial and mechanical stability. The integration of autonomous strategies with battery management systems potentially enables enhanced control over multiple battery cycling parameters.

Zhao, Lihong↗

Polymers in Lithium‐Ion and Lithium Metal Batteries

Abstract Lithium‐ion batteries play a significant role in modern electronics and electric vehicles. However, current Li‐ion battery chemistries are unable to satisfy the increasingly heightened expectations regarding energy demand and reliability. To boost the overall energy density while ensuring the safety of Li batteries, researchers have focused on alternative battery materials, such as silicon, sulfur, and Li metal. These represent promising avenues, although numerous obstacles (e.g., Si cracking, polysulfide shuttling, Li dendrites, etc.) must be tackled before batteries based on these materials can enter mass production and penetrate the mainstream market. Polymers are a class of materials that are widely used in current battery systems; however, many novel polymer chemistries may offer better performance and reliability than the current ones, and even overcome the issues of the above‐mentioned new battery materials. In this review, selected polymeric materials for solving these issues are categorized into four parts: polymer electrolytes, polymer artificial solid‐electrolyte interphases, binders, and separators. Both the current progress and the characterization methods are included. Potential future directions of energy materials research are pointed out as well.

Li, Junheng↗

Multifunctional Utilization of Pitch-Coated Carbon Fibers in Lithium-Based Rechargeable Batteries

This work reports carbon fibers as an electrode material and current collector for dual-carbon and lithium-ion batteries. Here, fully graphitic and semigraphitic carbon fibers undergo anion intercalation beyond 4.5 V versus Li/Li + . Symmetric dual-carbon full cells using a pitch-coated fully graphitic carbon fiber mat as both cathode and anode delivers an energy-density of 276 and 322 Wh kg -1 at 342 W kg -1 power density in the voltage range of 3.0–5.0 and 3.0–5.2 V, respectively. On the other hand, nongraphitic carbon fibers do not exhibit anion intercalation up to 5.2 V and can be used as a current collector. They also possess a larger number of Li + storage sites in their randomly oriented microstructure when used as an anode. A lithium-ion full cell with double carbon-coated C-LiFePO 4 loaded on nongraphitic carbon fiber as a cathode and pitch-coated nongraphitic carbon fiber as an anode exhibits 202.6 and 75.2 Wh kg -1 energy density at power densities of 46.75 W kg -1 and 11.7 kW kg -1 , respectively in 2.0–3.5 V range. This pitch-coated carbon fiber-based battery configuration eliminates the need for metal foils and costly fluorinated binders, lowers overall weight of the cell, and is capable of sustaining mechanical stress and thermal shock.

PF6− intercalation↗

Unveiling the Role of Critical Impurities in Spent LiFePO 4 Cathodes for Scalable Direct Regeneration

Direct regeneration offers a promising alternative to recycling End-of-Life (EoL) batteries by restoring metal elements and preserving the material structure, yet scaling these technologies to handle practical cathode black mass (CBM) with impurities remains challenging. Here, this study investigates the evolution of impurities, including aluminum (Al), polyvinylidene difluoride (PVDF) binder, and residual carbon (C), during direct recycling of spent LiFePO 4 (LFP) cathodes and their impact on electrochemical performance. Using various ex situ and in situ analyses, it is shown that the formation of lithium fluoride (LiF) during the traditional direct recycling process hinders lithium diffusion and deteriorates the reversible capacity. To address this major challenge, the combination of pH-controlled hydrothermal purification and the two-step sintering process is proposed effectively to regenerate spent LFP cathodes, eliminating the negative effect of Al and fluorine (F) impurities while mitigating any potential impacts of carbon residuals. The regenerated LFP from spent CBM achieves superior performance, retaining 152.5 mAh g −1 at 0.1 C and 133 mAh g −1 at 1 C with 98.7% capacity retention after 200 cycles. This approach is further validated using three distinct waste feedstocks from battery modules, enhancing impurity management and scalability in direct recycling. These findings present a sustainable and economically viable solution for large-scale LFP regeneration.

25 ENERGY STORAGE↗

Addressing Inherent Challenges to Chemical Relithiation of Cycled End‐of‐Life Cathode Materials

Recycling end‐of‐life (EOL) lithium‐ion batteries (LIBs) is important to retain valuable resources from critical materials present in EOL battery waste. Direct recycling methods offer an opportunity to recover intact valuable cathode materials with minimal re‐processing. An important step of the direct recycling process is relithiation which is used to restore lithium content to EOL cathode materials. However, little has been done to study how preprocessing steps such as washing or binder removal may affect relithiation methods in the direct recycling process. Here, the evolution of fluorine byproducts left over from preprocessing steps during a low‐temperature chemical redox mediator relithiation process is tracked. A facile washing step is presented as a solution for mediating adverse effects of surface contamination on the chemical relithiation performance. The structure, lithium content, and electrochemical performance of relithiated EOL NMC 622 material that underwent a pre‐relithiation washing step to remove fluorine byproducts is shown to match that of pristine NMC 622. In this work, it is showed that redox mediator relithiation as a part of a direct recycling process is a promising low energy method that can be applied to EOL material with inherent surface impurities if the proper pre‐relithiation processing steps are implemented.

25 ENERGY STORAGE↗

Sulfonated Diels–Alder Poly(Phenylene)s in Membrane Electrode Assemblies for Fuel Cells

The transition to environmentally sustainable materials in fuel cells requires alternatives to persistent polyfluoroalkyl substances (PFAS) like Nafion. This study investigates the performance-limiting factors of membrane electrode assemblies (MEAs) utilizing sulfonated Diels–Alder poly(phenylene)s (sDAPPs) as PFAS-free polymer electrolytes. Among the configurations evaluated, the greatest performance loss occurred when sDAPP is used as the cathode binder, primarily due to phenyl group adsorption on catalyst surfaces, which reduces oxygen reduction reaction activity and impedes oxygen transport. Additional performance degradation arises from membrane-electrode interfacial incompatibility and insufficient ionomer hydrophobicity. By addressing ionomer adsorption and improving interfacial contact, an sDAPP-based cathode achieved a current density of 1.57 A cm −2 at 0.6 V under fully humidified H 2 /air conditions at 80 °C and 150 kPa abs . These results offer key insights for advancing high-performance, PFAS-free fuel cell technologies.

08 HYDROGEN↗

Synergy of Epoxy Chemical Tethers and Defect‐Free Graphene in Enabling Stable Lithium Cycling of Silicon Nanoparticles

Abstract We report a new approach for nanosilicon–graphene hybrids with uniquely stable solid electrolyte interphase. Expanded graphite is gently exfoliated creating “defect‐free” graphene that is non‐catalytic towards electrolyte decomposition, simultaneously introducing high mass loading (48 wt. %) Si nanoparticles. Silane surface treatment creates epoxy chemical tethers, mechanically binding nano‐Si to CMC binder through epoxy ring‐opening reaction while stabilizing the Si surface chemistry. Epoxy‐tethered silicon pristine–graphene hybrid “E‐Si‐pG” exhibits state‐of‐the‐art performance in full battery opposing commercial mass loading (12 mg cm −2 ) LiCoO 2 (LCO) cathode. At 0.4 C, with areal capacity of 1.62 mAh cm −2 and energy of 437 Wh kg −1 , achieving 1.32 mAh cm −2 , 340.4 Wh kg −1 at 1 C. After 150 cycles, it retains 1.25 mAh cm −2 , 306.5 Wh kg −1 . Sputter‐down XPS demonstrates survival of surface C‐Si‐O‐Si groups in E‐Si‐pG after repeated cycling. The discovered synergy between support defects, chemical‐mechanical stabilization of Si surfaces, and SEI‐related failure may become key LIB anode design rule.

Liu, Wei↗

Synergistic Doping and Intercalation: Realizing Deep Phase Modulation on MoS 2 Arrays for High-Efficiency Hydrogen Evolution Reaction

A synergistic N doping plus PO 4 3- intercalation strategy is used to induce high conversion (ca. 41%) of 2H-MoS 2 into 1T-MoS, which is much higher than single N doping (ca. 28 %) or single PO 4 3- intercalation ca. 10%). A scattering mechanism is proposed to illustrate the synergistic phase transformation from the 2H to the 1T phase, which was confirmed by synchrotron radiation and.spherical aberration TEM. To further enhance reaction kindies, the designed (N, PO 4 3- )-MoS 2 nanosheds are combined with conductive vertical graphene (VG) skeleton forming binder-free arrays fir high efficiencyhydrogen evolution reaction (HER). Owing 10 the decreased band gap, lower d-band censer, and smaller hydrogen adsorption/desorption energy, the designed (NPO 4 3- )-MoSJVG electrode shows excellent HER perfor mance with a lower Tafel slope and overpotential than N-MoS 2 /VG, PO 4 3- -MoS 2 /VG counterparts, and other Mo-base catalysts in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selenium Nanocomposite Cathode with Long Cycle Life for Rechargeable Lithium‐Selenium Batteries

Abstract Selenium (Se) is a potential cathode material for high energy density rechargeable lithium batteries. In this study, a binder‐free Se‐carbon nanotube (CNT) composite electrode has been prepared by a facile chemical method. At initial state, Se is present in the form of branched nanowires with a diameter of <150 nm and a length of 1–2 μm, interwoven with CNTs. After discharge and re‐charge, the Se nanowires are converted to nanoparticles embedded in the CNT network. This synthesis method provides a path for fabricating the Se cathodes with controllable mass loading and thickness. By studying the composite electrodes with different Se loading and thickness, we found that the electrode thickness has a critical impact on the distribution of Se during repeated cycling. Promising cycling performance was achieved in thin electrodes with high Se loading. The composite electrode with 23 μm thickness and 60 % Se loading shows a high initial capacity of 537 mAh g −1 and stable cycling performance with a capacity of 401 mAh g −1 after 500 cycles at 1 C rate. This study reports a synthesis strategy to obtain Se/CNT composite cathode with long cycle life for rechargeable Li−Se batteries.

Cui, Yi↗

Influence of Polymer and Support Interactions on the Electrocatalytic Properties of Heterogenized Molecular Complexes

Heterogenized molecular catalysts have been the subject of increasing interest in the context of electrochemical small molecule activation due to the possibility of active site homogeneity and tunability, which can surpass many nanostructured materials. When molecular catalysts strongly interact with carbon supports through π–π interactions, they tend to show higher selectivity and activity during heterogeneous electrochemical reactions. Indeed, ligand modifications in the secondary sphere that allow for more π–π overlap between catalyst and carbon support often show improved performance. Interactions between catalyst and polymer binder are also a possible modulus of control in these reactions, either through coordinating moieties that interact with active sites or through control over substrate or product transport. Finally, the covalent linking of molecular complexes onto carbon materials has also been shown to result in high activity and stability. Recent advances in the use of carbon supports, both through covalent and non-covalent interactions, and polymers to alter small molecule activation by heterogenized molecular catalysts are summarized in this Perspective.

Johnson, Elizabeth K. [University of Virginia, Cha↗

High Areal Capacity Si/LiCoO 2 Batteries from Electrospun Composite Fiber Mats

Here, freestanding nanofiber mat Li-ion battery anodes containing Si nanoparticles, carbon black, and poly(acrylic acid) (Si/C/PAA) are prepared using electrospinning. The mats are compacted to a high fiber volume fraction (~0.85), and interfiber contacts are welded by exposing the mat to methanol vapor. A compacted+welded fiber mat anode containing 40 wt % Si exhibits high capacities of 1,484 mA h g -1 (3,500 mA h g$-1\atop{Si}$) at 0.1 C and 489 mAh g -1 at 1 C and good cycling stability (e.g., 73% capacity retention over 50 cycles). Post-mortem analysis of the fiber mats shows that the overall electrode structure is preserved during cycling. Whereas many nanostructured Si anodes are hindered by their low active material loadings and densities, thick, densely packed Si/C/PAA fiber mat anodes reported here have high areal and volumetric capacities (e.g., 4.5 mA h cm -2 and 750 mA h cm -3 , respectively). A full cell containing an electrospun Si/C/PAA anode and electrospun LiCoO 2 -based cathode has a high specific energy density of 270 Wh kg -1 . The excellent performance of the electrospun Si/C/PAA fiber mat anodes is attributed to the: (i) PAA binder which interacts with the SiO x surface of Si nanoparticles and (ii) high material loading, high fiber volume fraction, and welded interfiber contacts of the electrospun mats

25 ENERGY STORAGE↗

Self‐Standing Carbon Nanofibers@Carbon Felt Electrodes to Boost Electrolyzer Productivity: Application to the Electro‐Manufacturing of trans ‐3‐Hexenedioic Acid and Adipic Acid

The industrial implementation of electrosynthesis for chemical manufacturing remains constrained by the limited surface area of conventional electrodes. Herein, this challenge is addressed by designing a carbon nanofiber@carbon felt (CNF@CF) electrode platform that combines the high conductivity, flexibility, and ease of handling of commercial carbon felts (CF) with the large surface area and tunable surface chemistry of carbon nanofibers (CNFs). CNFs are deliberately grown onto the CF scaffold to form a sword-in-sheath structure, where entangled nanofibers wrap the felt macrofibers to provide excellent mechanical stability and electrical conductivity without binders. CNF@CF is evaluated both as an electrode and as a catalyst support for the electrochemical hydrogenation of cis,cis-muconic acid (ccMA), a biobased platform molecule key to the production of performance polyamides and renewable Nylon 6,6. As a noncatalytic electrode for the partial hydrogenation to trans-3-hexenedioic acid, CNF@CF achieves a threefold increase in both cumulative productivity and Faradaic efficiency (FE) compared to bare CF. A similar boost in catalytic activity and energy efficiency is observed using Pd/CNF@CF for the hydrogenation of ccMA to adipic acid. These results highlight the opportunities of the CNF@CF platform for electro-organic synthesis and sustainable chemical manufacturing.

electrochemical hydrogenation↗

Degradation Diagnostics from the Subsurface of Lithium-Ion Battery Electrodes

Despite the long-established rocking-chair theory of lithium-ion batteries (LIBs), developing novel characterization methodology with higher spatiotemporal resolution facilitates a better understanding of the solid electrolyte interphase studies to shape the reaction mechanisms. In this work, we develop a Xenon ion plasma focused ion beam (Xe + PFIB)-based characterization technique to probe the cross-sectional interface of both ternary cathode and graphite anode electrodes, with the focus on revealing the chemical composition and distribution underneath the electrode surface by in-depth analysis of secondary ions. Particularly, the lithium fluoride is detected in the pristine cathode prior to contact with the electrolyte, reflecting that the electrode degradation is in the form of the loss of lithium inventory during electrode preparation. This degradation is related to the hydrolysis of the cathode material and the decomposition of the PVDF binder. Here, through the quantitative analysis of the transition-metal degradation products, manganese is found to be the dominant element in the newly formed inactive fluoride deposition on the cathode, while no transition metal signal can be found inside the anode electrode. These insights at high resolution implemented via a PFIB-based characterization technique not only enrich the understanding of the degradation mechanism in the LIBs but also identify and enable a high-sensitivity methodology to obtain the chemical survey at the subsurface, which will help remove the capacity-fade observed in most LIBs.

25 ENERGY STORAGE↗

Pelletization of Immobilized Amine Carbon Dioxide Sorbents with Fly Ash and Poly(vinyl chloride)

Abstract A combination of coal fly ash (FA) and a polymer binder, namely, poly(vinyl chloride) (PVC), was used to pelletize immobilized amine CO 2 sorbents. The pelletization of mixtures of FA and 50 wt % tetraethylenepentamine (TEPA) or ethylenimine oligomer mixture ( M w =423)/silica (EI 423 ‐S) with PVC created a rigid PVC/FA/sorbent network. The strength of the network was attributed, in part, to the hydrogen bonding of PVC with the hydroxy and amine groups of the FA and sorbent (infrared spectroscopy). Increasing the PVC molecular weight or FA content enhanced the pellet strength and reduced CO 2 capture. The optimum pellet, FA/EI 423 ‐S (20/80)_PVC 62 [10 wt % PVC 62 ( M w =62 000), 17 wt % FA], captured 1.33 mmol g −1 and exhibited a crush strength of 1.42 MPa. The reaction between PVC and amines produced ammonium ions (−NH 3 + /−NH 2 + ), which reduced the CO 2 captured by the pellet during stability testing. This issue was partially resolved by replacing PVC 62 with p ‐phenylenediamine‐modified PVC 62 , which also enhanced the pellet CO 2 capture to 1.5 mmol g −1 .

Wilfong, Walter Christopher↗