Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transportation Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Alternative Fuel Vehicle Usage and Owner Demographics in New York State

With mounting concerns over climate change and the environmental impact of fossil fuels, the United States has witnessed a growing interest in alternative fuel vehicles (AFVs). In 2021, approximately 1.5 million battery EVs (BEVs), 0.8 million plug-in hybrid EVs (PHEVs), and 5.5 million hybrid EVs (HEVs) were registered in the United States. In the state of New York, a total of 51,900 BEVs, 44,600 PHEVs, and 221,600 HEVs were registered in 2021. The current report presents the results of an analysis of AFV adoption patterns in New York State and the rest of the United States based on data from the 2017 National Household Travel Survey (NHTS). Overall, the report reveals the demographics and mobility factors (e.g., household income, homeownership, and trip length) that contribute to the adoption of AFVs. This study provides insights that can inform policy decisions aimed at promoting sustainable transportation solutions.The 2017 NHTS data showed that the percentage of households owning at least one AFV is lower in New York City compared with that in other regions of New York State. From the NHTS samples, of the 25 households that owned at least one BEV in New York State, 15 households (60%) lived within a 5-mile radius, based on the great circle distance, of the nearest charging station, and 23 households (92%) lived within a 10-mile radius of the nearest charging station. Furthermore, among the 40 households in New York State that own at least one PHEV, 48% (19 households) lived within a 5-mile radius of the closest EV charging station, and 83% (33 households) lived within a 10-mile radius of the nearest charging station. The rest of the United States had a higher percentage of households that own at least one AFV compared with that of New York State. A comparison was made between EV adoption levels using NHTS and EValuateNY, which is a tool that gathers statistics on the electric car market in New York State. The estimates obtained from New York State household samples in NHTS were slightly lower than the data provided by EValuateNY. In New York State and the rest of the United States, households with higher incomes tended to have a higher proportion of AFV ownership compared with those with lower incomes. For example, households in New York State earning $\$ $150,000 or more had an approximately 6% share of owning at least one AFV, which was markedly higher than those earning less than $\$ $100,000 (less than 3%). Additionally, homeowners in New York State and the rest of the United States also exhibited a significantly higher share of AFV ownership compared with that of renters. In New York State, households that own at least one AFV tended to travel farther and had longer travel times compared with their counterparts without an AFV. In terms of households with at least one AFV, households with HEVs tended to have more person trips, longer person miles of travel, and more vehicle miles traveled, resulting in longer travel times than that of households with BEVs or PHEVs. Notably, households with AFVs had a slightly lower share of family and personal business trips but a higher share of social and recreational trips compared with households without AFVs. Additionally, households with at least one AFV tended to have a slightly higher share of walking trips than their counterparts without an AFV. However, the comparisons were not statistically significant. These travel patterns observed in New York State were consistent with those observed in other regions of the United States.

33 ADVANCED PROPULSION SYSTEMS↗

United States Nuclear Power Reactor Used Nuclear Fuel Database and Applications

The Unified Database (UDB) within STANDARDS serves as the foundational data infrastructure for managing the United States' spent nuclear fuel inventory of 315,111 discharged assemblies totaling 91,036 metric tons of heavy metal. The database organizes this complex inventory through over 200 interconnected tables structured into eight primary attribute categories, supporting integrated analyses across storage, transportation, and disposal domains. Data enters the UDB through the GC-859 Nuclear Fuel Data Survey, which transitioned to web-based collection in 2023, improving data quality through real-time validation. The UDB enables automated generation of input files for nuclear safety analyses, reducing preparation time from weeks to hours while maintaining traceability. Applications include national inventory reporting, Certificate of Compliance assessments, and facility optimization. The three-tier distribution model balances accessibility with security requirements for federal agencies, national laboratories, and research organizations. The UDB provides essential data infrastructure as spent fuel management transitions from site-specific to integrated national campaigns.

Stefanovic, Peter↗

Jupiter: A Proposed Benchmark for Lead Void Worth with Plutonium

In the summer of 2017, a series of measurements were performed at the National Criticality Experiments Research Center (NCERC) in collaboration with the Japanese Atomic Energy Agency (JAEA) to measure the reactivity worth of voids in an array of lead and plutonium. This experiment, called Jupiter, measured multiple configurations of an array of aluminum boxes containing plutonium, aluminum, and lead plates. For some configurations, a selection of the lead interstitial plates were swapped with aluminum spacer frames to create “voids” in the lead interstitial material. Comparing the excess reactivity of the systems provides an empirical value of the lead void reactivity worth. These measurements were part of a larger collaboration to measure lead void reactivity worth with multiple nuclear material types and enrichments. This included other measurement series with both highly-enriched uranium (HEU), and a mixture of HEU and natural uranium to simulate low-enriched uranium (LEU). These data sets will be useful to the JAEA for a potential lead-bismuth cooled accelerator driven system. Additionally, there are not very many benchmarks in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) handbook sensitive to lead cross sections. Given that lead is widely used as a radiation shield and is part of new reactor designs, having more benchmarks in the ICSBEP handbook to better support cross section validation is important. Additional integral experiments could also aid in determining whether improvements have been made in new lead cross section evaluations. A benchmark evaluation for this experiment is being proposed in order to help fulfill these needs. Such evaluations contain both measured data, results from detailed transport code models, and analyses of the uncertainties associated with each. Examples of these uncertainties include the uncertainty in the measured excess reactivity, the composition of components, or their positioning within the model. This means it is easier to make comparisons between the measured and simulated data and better understand where improvements can be made to nuclear data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Enabling event-by-event precision in γ-ray cascades for neutron-induced reactions

Neutron-induced γ-ray spectra provide key inputs for modern active interrogation applications. A precise modeling of the nuclear reaction and subsequent emission of γ rays is challenging and often impossible due to limitations on evaluated data file formats and nuclear transport simulation codes. We present a framework that addresses these challenges by combining experimental data and reaction-model calculation outputs into an extended candidate version of the Generalized Nuclear Data Structure (GNDS) file, the successor format for the legacy Evaluated Nuclear Data File (ENDF-6). This proposed GNDS hierarchical format contains all the necessary ingredients for inline γ-ray cascade reproduction with event-by-event precision, including continuum–continuum and continuum–discrete transitions following neutron-capture and inelastic neutron scattering reactions. Cascade-event generation based on our approach demonstrates improved energy conservation on an event-by-event basis and permits the use of γ-γ coincidences in applications. This work offers, for the first time, a method to generate neutron-capture and inelastic neutron-scattering γ-ray cascades where energy conservation, correlations, and experimental primaries are fully accounted for.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Containment Analysis Capability of UNF-ST&DARDS

The Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS) methodology to perform automated containment analyses for potential transportation packages based on canister loading map information is described in this paper, and its capability is illustrated with example results. The allowable leakage rate is calculated with the procedures provided in ANSI N14.5-2014 and NUREG/CR-6487, which were adapted for containment analysis of a transportation package containing fuel assemblies with different nuclear characteristics (e.g., initial enrichment, burnup, and cooling time) and clad integrity (intact or damaged). UNF-ST&DARDS applies different source term calculation methodologies for low-burnup fuel (LBF) (i.e., <45 GWd/tonne U) assemblies and high-burnup fuel (HBF) (i.e., ≥45 GWd/tonne U) assemblies. The LBF radionuclide activities are based on actual fuel assembly burnup, initial enrichment, and cooling time. Bounding radionuclide activities based on a fuel pellet burnup value of 65 GWd/tonne U and actual fuel assembly cooling time are used for HBF assemblies. The fraction of failed fuel rods and the release fractions for the contributors to releasable source terms recommended in NUREG-1617 are used in the containment analysis regardless of fuel assembly burnup. However, UNF-ST&DARDS supports different parameter values for LBF and HBF assemblies. Finally, the containment analysis methodology for as-loaded transportation packages is presented in detail, and the UNF-ST&DARDS containment analysis capability is illustrated with results for simulated transportation packages containing spent nuclear fuel canisters in dry storage at selected sites.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of the concrete shield compositions from the 2010 criticality accident alarm system benchmark experiments at the CEA Valduc SILENE facility

In October 2010, a series of benchmark experiments were conducted at the French Commissariat a l'Energie Atomique et aux Energies Alternatives (CEA) Valduc SILENE facility. These experiments were a joint effort between the United States Department of Energy Nuclear Criticality Safety Program and the CEA. The purpose of these experiments was to create three benchmarks for the verification and validation of radiation transport codes and evaluated nuclear data used in the analysis of criticality accident alarm systems. This series of experiments consisted of three single-pulsed experiments with the SILENE reactor. For the first experiment, the reactor was bare (unshielded), whereas in the second and third experiments, it was shielded by lead and polyethylene, respectively. The polyethylene shield of the third experiment had a cadmium liner on its internal and external surfaces, which vertically was located near the fuel region of SILENE. During each experiment, several neutron activation foils and thermoluminescent dosimeters (TLDs) were placed around the reactor. Nearly half of the foils and TLDs had additional high-density magnetite concrete, high-density barite concrete, standard concrete, and/or BoroBond shields. CEA Saclay provided all the concrete, and the US Y-12 National Security Complex provided the BoroBond. Measurement data from the experiments were published at the 2011 International Conference on Nuclear Criticality (ICNC 2011) and the 2013 Nuclear Criticality Safety Division (NCSD 2013) topical meeting. Preliminary computational results for the first experiment were presented in the ICNC 2011 paper, which showed poor agreement between the computational results and the measured values of the foils shielded by concrete. Recently the hydrogen content, boron content, and density of these concrete shields were further investigated within the constraints of the previously available data. New computational results for the first experiment are now available that show much better agreement with the measured values.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Transport of trace species deduced from LIMS observations

One of the critical problems in the middle atmosphere at this time is understanding the interaction between atmospheric motions and photochemistry, and the way in which these two processes maintain the distributions of photochemically active species such as ozone. Recent work has shown that a great deal can be learned by considering the zonally averaged distributions and transports, i.e., working in the latitude-altitude plane. This 2-dimensional approach has been used in the past in Eulerian formation. Recent work (DUNKERTON, 1978) has shown that formulating the transport problems in terms of the residual mean circulation, which has similarity to the Lagrangian mean motion, results in a more physical picture of the way in which the transport takes place. Here, data from the Limb Infrared Monitor of the Stratosphere (LIMB) experiment are used to investigate how well the residual mean formulation works with real data, in the sense of asking how well the predicted ozone changes match those in regions of the lower stratosphere in which chemical changes may be neglected. This allows a test of the approximations that are made, and of the strengths and weaknesses of this approach to transport calculation.

Gille, J. C.↗

Variability of ozone loss during Arctic winter (1991 to 2000) estimated from UARS Microwave Limb Sounder measurement

A comprehensive analysis of version 5 Upper Atmosphere Research Satellite (UARS) Microwave Limb Sounder (MLS) ozone data using a Lagrangian Transport (LT) model provides estimates of chemical ozone depletion for the 1991-1992 through 1997-1998 Arctic winters. These new estimates give a consistent, three-dimensional picture of ozone loss during seven Arctic winters; previous Arctic ozone loss estimates from MLS were based on various earlier data versions and were done only for late winter and only for a subset of the years observed by MLS. We find large interannual variability in the amount, timing, and patterns of ozone depletion and in the degree to which chemical loss is masked by dynamical processes.

Arctic ozone loss↗

Overview of the preparation and use of an OV-10 aircraft for wake vortex hazards flight experiments

An overview is presented of the development, use, and current flight-test status of a highly instrumented North American Rockwell OV-10A Bronco as a wake-vortex-hazards research aircraft. A description of the operational requirements and measurements criteria, the resulting instrumentation systems and aircraft modifications, system-calibration and research flights completed to date, and current flight status are included. These experiments are being conducted by the National Aeronautics and Space Administration as part of an effort to provide the technology to safely improve the capacity of the nation's air transportation system and specifically to provide key data in understanding and predicting wake vortex decay, transport characteristics, and the dynamics of encountering wake turbulence. The OV-10A performs several roles including meteorological measurements platform, wake-decay quantifier, and trajectory-quantifier for wake encounters. Extensive research instrumentation systems include multiple airdata sensors, video cameras with cockpit displays, aircraft state and control-position measurements, inertial aircraft-position measurements, meteorological measurements, and an on-board personal computer for real-time processing and cockpit display of research data. To date, several of the preliminary system check flights and two meteorological-measurements deployments have been completed. Several wake encounter and wake-decay-measurements flights are planned for the fall of 1995.

Stuever, Robert A.↗

Tropospheric Methane Over the Pacific Basin During TRACE-P

We received funding for the acquisition, statistical analysis, interpretation, and publication of atmospheric methane data collected during the Transport and Chemical Evolution over the Pacific (TRACE-P) mission, flown February through April of 2001. These high precision measurements were made aboard the NASA DC-8 and P-3B aircraft using a fast response, tunable diode laser system, the DACOM instrument. Our analysis focused on the vertical and geographical distribution of this key trace gas, particularly in the context of other data available from the region such as those from the Pacific NOAA CMDL surface sites, and earlier NASA aircraft missions (such as PEM-West A and B). The paper reporting these results, "Large-Scale Distribution of CH4 in the Western Pacific: Sources and Transport from the Asian Continent" by authors K.B. Bartlett, G.W. Sachse, T. Slate, C. Harward, and D.R. Blake, is attached. The dataset of roughly 13,800 CH4 measurements ranged between 1602 ppb in stratospherically impacted air and 2149 ppb in highly polluted air. Overall, we found that CH4 concentrations were highly correlated with trace gases characteristic of a mix of anthropogenic industrial and combustion sources. They were strikingly correlated with ethane (C2H6) in particular, whose major sources are natural gas leakage and biomass burning. Correlation between the two hydrocarbons indicated that these sources may dominate for CH4 as well at this time.

Bartlett, Karen B.↗

COLD-SAT: An orbital cryogenic hydrogen technology experiment

The COLD-SAT spacecraft will perform subcritical liquid hydrogen storage and transfer experiments under low-gravity conditions to provide engineering data for future space transportation missions. Consisting of an experiment module mated to a spacecraft bus, COLD-SAT will be placed in an initial 460 km circular orbit by an Atlas I commercial launch vehicle. After deployment, the three-axis-controlled spacecraft bus will provide electric power, experiment control and data management, communications, and attitude control along with propulsive acceleration levels ranging from 10(-6) to 10(-4)g. These accelerations are an important aspect of some of the experiments, as it is desired to know the effects that low gravity levels might have on the heat and mass transfer processes involved. The experiment module will contain the three liquid hydrogen tanks, valves, pressurization equipment, and instrumentation. At launch all the hydrogen will be in the largest tank, which has helium-purged MLI and is loaded and topped off by the hydrogen tanking system used for the Centaur upper stage of the Atlas. The two smaller tanks will be utilized in orbit for performing some of the experiments. The experiments are grouped into two classes on the basis of their priority, and include six regarded as enabling technology and nine regarded as enhancing technology.

Schuster, J. R.↗

COLD-SAT - An orbital cryogenic hydrogen technology experiment

The COLD-SAT spacecraft will perform subcritical liquid hydrogen storage and transfer experiments under low-gravity conditions to provide engineering data for future space transportation missions. Consisting of an experiment module mated to a spacecraft bus, COLD-SAT will be placed in an initial 460 km circular orbit by an Atlas I commercial launch vehicle. After deployment, the three-axis-controlled spacecraft bus will provide electric power, experiment control and data management, communications, and attitude control along with propulsive acceleration levels ranging from 10 (-6) to 10(-4) g. These accelerations are an important aspect of some of the experiments, as it is desired to know the effects that low gravity levels might have on the heat and mass transfer processes involved. The experiment module will contain the three liquid hydrogen tanks, valves, pressurization equipment, and instrumentation. At launch all the hydrogen will be in the largest tank, which has helium-purged MLI and is loaded and topped off by the hydrogen tanking system used for the Centaur upper stage of the Atlas. The two smaller tanks will be utilized in orbit for performing some of the experiments. The experiments are grouped into two classes on the basis of their priority, and include six regarded as enabling technology and nine regarded as enhancing technology.

Schuster, J. R.↗

Study of mass and heat transport of the tropical Atlantic Ocean using models and altimeter data

The specific objectives of this proposal are: (1) to assess the quality of the TOPEX/POSEIDON surface altimeter data in regard to its use for a large, low-frequency monitoring of the surface topography of the tropical Atlantic Ocean; (2) to develop a method, on a demonstration basis, to derive from the tropical Atlantic the depth of the thermocline and the heat content changes from the surface altimeter data field; (3) to develop a method of assimilation of altimeter data into Oceanic General Circulation Models (OGCM's) for the purpose of preparing an operational, permanent, three-dimensional now casting of the tropical Atlantic Ocean (a TOGA objective); and (4) to derive from these models global circulation fields and a time series of mass and meridional heat transports across the tropical Atlantic region (a WOCE objective).

Merle, Jacques↗

Benchmarking GEANT4 and PHITS for 14.8-MeV neutron transport in polyethylene and graphite materials

The feasibility of GEANT4 and PHITS with ENDF/B-VIII.0, JEFF-3.3 and JENDL-4.0 evaluated nuclear data libraries in 14.8-MeV neutron transport simulation are verified by comparing with the MCNP calculations and the experimental data. Here the measured data are from neutron integral experiments including graphite and polyethylene samples. For 6 cm-thick polyethylene and 20 cm-thick graphite samples, the results from GEANT4 and PHITS with three evaluated nuclear data libraries agree well with the MCNP calculations. For a 2 cm-thick graphite sample, the simulated results from GEANT4 and PHITS agree with the MCNP calculations, and they all underestimate the experiment data in below 3 MeV and overestimate them in the energy range of 5–7 MeV. The difference between the simulation results and the experimental data depends on the evaluated nuclear data libraries. In overall, GEANT4 and PHITS are performing reasonable jobs for 14.8-MeV neutron transport simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-altitude wind measurements from wide-body jet transports

For a 2-week period in the spring of 1977, data were collected onboard wide-body jet transports for the determination of winds and wind shear during landings and take-offs. The data represent about 640 take-offs or landings at 14 airports in Europe and the United States. Analysis of the wind-shear data indicates that shears of a given value are equally likely to occur at any altitude in the lower 1400-ft section of the atmosphere. Analysis of the data indicates that low shears (plus or minus .033 knot/per ft) have a 67-percent chance of occurrence during a landing or take-off, while higher values (plus or minus 0.15 knot/per ft) have a 0.5-percent chance of occurrence. A determination of the duration of a given shear was not made.

Dunham, R. E., Jr.↗

Gyrokinetic Particle Simulation of Turbulent Transport in Burning Plasmas

The SciDAC project at the IFS advanced the state of high performance computing for turbulent structures and turbulent transport. The team project with Prof Zhihong Lin [PI] at Univ California Irvine produced new understanding of the turbulent electron transport. The simulations were performed at the Texas Advanced Computer Center TACC and the NERSC facility by Wendell Horton, Lee Leonard and the IFS Graduate Students working in that group. The research included a Validation of the electron turbulent transport code using the data from a steady state university experiment at the University of Columbia in which detailed probe measurements of the turbulence in steady state were used for wide range of temperature gradients to compare with the simulation data. These results were published in a joint paper with Texas graduate student Dr. Xiangrong Fu using the work in his PhD dissertation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Longitudinal train dynamics model for a rail transit simulation system

The paper develops a longitudinal train dynamics model in support of microscopic railway transportation simulation. The model can be calibrated without any mechanical data making it ideal for implementation in transportation simulators. The calibration and validation work is based on data collected from the Portland light rail train fleet. The calibration procedure is mathematically formulated as a constrained non-linear optimization problem. The validity of the model is assessed by comparing instantaneous model predictions against field observations, and also evaluated in the domains of acceleration/deceleration versus speed and acceleration/deceleration versus distance. A test is conducted to investigate the adequacy of the model in simulation implementation. The results demonstrate that the proposed model can adequately capture instantaneous train dynamics, and provides good performance in the simulation test. Thus, the model provides a simple theoretical foundation for microscopic simulators and will significantly support the planning, management and control of railway transportation systems.

42 ENGINEERING↗

Electrothermal Phenomena in Zinc Oxide Nanowires and Contacts

Heat generation along nanowires and near their electrical contacts influences the feasibility of energy conversion devices. This work presents ZnO nanowire electrical resistivity data and models electrothermal transport accounting for heat generation at metal-semiconductor contacts, axial thermal conduction, and substrate heat losses. The current-voltage relationships and electron microscopy indicate sample degradation is caused by the interplay of heat generation at contacts and within the nanowire volume. The model is used to interpret literature data for Si, GaN, and ZnO nanowires. This work assists with electrothermal nanowire measurements and highlights practical implications of utilizing solution-synthesized nanowires. The work was conducted at Stanford University from 2010-2 through a Sandia Campus Executive Fellowship awarded to PhD candidate Saniya LeBlanc.

LeBlanc, Saniya A.↗